Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 929
Filter
1.
Rev. Odontol. Araçatuba (Online) ; 43(1): 18-23, jan.-abr. 2022. ilus
Article in Portuguese | LILACS, BBO | ID: biblio-1361569

ABSTRACT

O presente artigo tem como objetivo relatar um caso clínico de selamento de perfuração com uma técnica de inserção modificada do MTA. Após a anestesia, foi realizado o isolamento absoluto do dente e remoção do material presente na câmara, com o auxílio do inserto ultrassônico Smart X 1. Realizada a limpeza da perfuração utilizando hipoclorito de sódio e modelagem do canal com o instrumento rotatório, a obturação foi concebida com cone de guta percha e cimento AHPlus. Com broca Gates Glidden #3 foi removida a guta percha até o nível da perfuração. Em seguida, 5 mg de MTA branco foi manipulado, de acordo com recomendações do fabricante usando água destilada na proporção 1:1 e inserido na canaleta de uma régua endodôntica. Com o auxílio do instrumento de RHEM o material foi removido da canaleta e inserido na perfuração, concluindo o vedamento da mesma. Conclui-se neste caso clínico que o selamento de perfuração com MTA obteve sucesso clínico e radiográfico, utilizando a técnica de inserção com MTA modificada(AU)


This article aims to report a clinical case of sealing drilling rig with a modified MTA insertion technique. After anesthesia, the absolute isolation of the tooth and removing the material present in the Chamber, with the aid of ultrasonic Insert Smart X 1. Held drilling cleaning using sodium hypochlorite and modeling the canall with the Rotary instrument, the filling was designed with cone of gutta percha and cement AHPlus. With Gates Glidden bur #3 removed the gutta percha drilling level. Then 5 mg of white MTA was handled, according to manufacturer 's recommendations using distilled water in the ratio 1:1 and inserted in a canal endodontic ruler. With the aid of RHEM instrument the material was removed from the canal and inserted in drilling, completing the enclosure. It is concluded in this case that the sealing of drilling with clinical and radiographic success MTA, using the technique of does not avoid inserting rotating instrument. The obturation was performed with gutta percha cone and AHPlus cement. Removed gutta percha with Gates Glidden drill to drill level. Then, 5 mg of white MTA was handled, according to manufacturer 's recommendations using distilled water in the ratio 1: 1. Soon after, it was inserted in the caneleta of an endodontic ruler and with the aid of the instrument of RHEM the material was inserted in the indicated place. It is concluded in this clinical case that the perforation sealing with MTA obtained clinical and radiographic success, using the insertion technique with modified MTA(AU)


Subject(s)
Humans , Male , Middle Aged , Root Canal Filling Materials , Root Canal Obturation , Root Canal Therapy , Sodium Hypochlorite , Biocompatible Materials , Root Canal Preparation , Gutta-Percha
2.
Rev. Odontol. Araçatuba (Impr.) ; 42(3): 4-8, set.-dez. 2021. tab
Article in Portuguese | LILACS, BBO | ID: biblio-1283897

ABSTRACT

Introdução: Os cones de guta percha são utilizados para obturação de canais radiculares, entretanto a desinfecção desses cones deve ser realizada previamente à obturação, evitando uma contaminação, uma vez que com o manuseio diário na clínica, pode ocorrer a proliferação de microrganismos. Objetivo: Relatar através de uma revisão de literatura a importância da desinfecção de cones de guta percha previamente á obturação dos canais radiculares, com diferentes soluções desinfetantes utilizadas na odontologia. Metodologia: Foi realizada uma busca em artigos de revisão de literatura nas bases de dados Pubmed, Scielo, Lilacs com diferentes anos de publicação, mas todos com enfoque principal no tema de desinfecção de cones de guta percha com diferentes soluções químicas. Foram utilizados os descritores guta percha, desinfecção, soluções químicas. Conclusão: Medidas de prevenção devem ser empregadas durante o atendimento odontológico, em especial durante a obturação dos canais radiculares, sendo a desinfecção dos cones de guta percha essencial(AU)


Introduction: Gutta percha points are used to fill root canals, however its disinfection must be performed prior to filling, avoiding contamination, since with daily handling in the proliferation of microorganisms can occur. Objective: To report through a literature review the importance of disinfecting gutta percha points prior to root canal filling, with different disinfectant solutions used in dentistry. Methodology: A search for literature review articles was carried out in the Pubmed, Scielo, Lilacs databases with different years of publications, but all with a main focus on the topic of disinfection of gutta-percha points with different chemical solutions. The keywords gutta percha, disinfection, chemical solutions were used. Conclusion: Preventive measures must be used during dental care, especially during root canal filling, with the disinfection of gutta percha points being an essential(AU)


Subject(s)
Root Canal Irrigants , Root Canal Obturation , Gutta-Percha , Root Canal Filling Materials , Dental Pulp Cavity
3.
Rev. Odontol. Araçatuba (Impr.) ; 42(3): 32-38, set.-dez. 2021. ilus, tab
Article in Portuguese | LILACS, BBO | ID: biblio-1284132

ABSTRACT

A manutenção dos dentes decíduos na cavidade bucal até o período de sua esfoliação fisiológica é de extrema importância. A terapia endodôntica é um tratamento indicado quando a saúde do tecido pulpar é comprometida e diversas técnicas e materiais podem ser empregados para realizar a obturação de canais radiculares. O objetivo deste estudo in vitro foi comparar a qualidade do preenchimento dos canais radiculares utilizando diferentes técnicas de obturação e pastas obturadoras em dentes decíduos bovinos submetidos à pulpectomia. Foram selecionados 30 incisivos decíduos bovinos, e preparados através da técnica manual com posterior obturação dos canais radiculares por meio de duas técnicas e três pastas obturadoras. Os dentes foram divididos em 6 grupos (n= 5/ grupo) da seguinte forma: GI ­ Técnica manual e pasta de Hidróxido de Cálcio PA espessada com Óxido de Zinco; GII ­ Técnica manual e pasta Guedes-Pinto Modificada; GIII ­ Técnica manual e pasta Feapex®; GIV ­ Técnica com auxílio da lentulo e pasta de Hidróxido de Cálcio PA espessada com Óxido de Zinco; GV ­ Técnica com auxílio da lentulo e pasta Guedes-Pinto Modificada; GVI ­ Técnica com auxílio da lentulo e pasta Feapex®. Foram realizadas as radiografias digitais para verificar a qualidade do preenchimento dos canais radiculares. Os resultados obtidos apresentaram diferenças significativas na qualidade do preenchimento dos canais radiculares entre os grupos de dentes decíduos bovinos obturados. Considerando os resultados obtidos e a metodologia empregada, pode-se concluir que existe diferença entre as técnicas de obturação e pastas obturadoras(AU)


Maintaining primary teeth in the oral cavity until the period of their physiological exfoliation is extremely important. An endodontic therapy is a treatment indicated when the health of the pulp tissue is compromised and several techniques and materials can be used to perform root canal filling. The aim of this in vitro study was to compare the quality of root canal filling using different filling techniques and filling masses in primary bovine teeth implanted under pulpectomy. Thirty bovine primary incisors were selected and prepared using the manual technique with subsequente filling of the root canals using two techniques and three filling materials. The teeth were divided into 6 groups (n= 5 / group) as follows: GI - Technical Manual and Calcium Hydroxide Mass PA thickened with Zinc Oxide; GII - Manual technique and modified Guedes-Pinto pasta; GIII - Manual technique and Feapex® paste; GIV - Technique with the aid of lentulo and mass of Calcium Hydroxide PA thickened with Zinc Oxide; GV ­ Technique with the aid of lentulo and modified Guedes-Pinto mass; GVI - Technique with the aid of lentulo and Feapex® mass. Digital radiographs were taken to check the quality of the filling of the root canals. The resulting results dissipated in the quality of filling the root canals between the groups of primary bovine teeth filled. Know the results obtained and the methodology used, it can be concluded that there is a difference between filling techniques and filling masses(AU)


Subject(s)
Pulpectomy , Root Canal Filling Materials , Root Canal Obturation , Tooth, Deciduous , Root Canal Therapy , Zinc Oxide , Calcium Hydroxide , Dental Pulp Cavity
4.
Rev. Odontol. Araçatuba (Impr.) ; 42(3): 39-44, set.-dez. 2021. ilus
Article in Portuguese | LILACS, BBO | ID: biblio-1291668

ABSTRACT

O objetivo do presente estudo in vitro foi avaliar, por meio de radiografia digital, a qualidade de preenchimento dos canais de dentes incisivos bovinos permanentes jovens quando realizado tampão apical com hidróxido de cálcio e MTA associados a outros materiais e posteriormente obturados. Foram utilizados dentes incisivos permanentes bovinos com rizogênese incompleta preparados de forma manual com as limas tipo K, irrigados com hipoclorito de sódio 1% e soro fisiológico. Após, foram utilizados os materiais indicados para confecção do tampão apical: hidróxido de cálcio P.A associado ao propilenoglicol e ao iodofórmio; hidróxido de cálcio P.A juntamente com MTA e propilenoglicol e somente MTA, em seguida obturados com cones de guta percha e cimento AH Plus e radiografados para avaliação. Os dados foram submetidos ao teste Qui-Quadrado de Pearson e Teste exato de Fisher com nível de significância de 5%. Os resultados obtidos não apresentaram diferença estatisticamente significativa entre os três grupos, sendo que o valor resultado foi de p=0,442, porém o grupo composto pelo cimento de hidróxido de cálcio P.A associado ao MTA e propilenoglicol apresentou uma qualidade de preenchimento boa (100 %) em relação aos outros cimentos avaliados, que se mostraram satisfatório (40%) e bom (60%) no procedimento de apicificação. Não houve diferença significativa de qualidade de preenchimento de tampão apical nos grupos, no entanto o grupo composto pelo hidróxido de cálcio P.A. associado ao MTA e propilenoglicol apresentou resultado superior(AU)


The objective of the present in vitro study was to evaluate, through digital radiography, the quality of filling in the young permanent bovine incisor teeth canals when the apical buffer was performed with calcium hydroxide and MTA associated with other materials and subsequently filled. Permanent bovine incisor teeth with incomplete rhizogenesis were prepared manually with K files type, irrigated with 1% sodium hypochlorite and saline. Afterwards, the materials indicated for making the apical buffer were used: calcium hydroxide P.A associated with propylene glycol and iodoform; calcium hydroxide P.A together with MTA and propylene glycol and only MTA, then filled with gutta-percha cones and AH Plus cement and radiographed for evaluation. The data were submitted to the Pearson's Chi-square test and Fisher's exact test with a significance level of 5%, once the result value was p=0,442. The results obtained showed no statistically significant difference between the three groups, the result being p=0,442, however the group composed of calcium hydroxideP.A. cement associated with MTA and propylene glycol showed a good filling quality (100%) in relation to the other evaluated cements, which were satisfactory (40%) and good (60%) in apexification procedure. There was no significant difference in quality of plug apical filling in the groups, however the group composed of calcium hydroxide P.A cement associated with MTA and propylene glycol showed a superior result(AU)


Subject(s)
Root Canal Filling Materials , Root Canal Obturation , Root Canal Therapy , Calcium Hydroxide
5.
Braz. dent. j ; 32(4): 1-7, July-Aug. 2021. tab, graf
Article in English | LILACS, BBO | ID: biblio-1345516

ABSTRACT

Abstract This study evaluated the 3D quality of root-end filling, assessing the presence (volume and percentage) of marginal gaps and internal voids formed after retro-filling with three calcium silicate-based materials: MTA Angelus (Angelus Soluçoes Odontologicas, Londrina, PR, Brazil), Biodentine (Septodont Ltd., Saint Maur-des-Faussés, France) and Neo MTA Plus (Avalon Biomed Inc., Bradenton, Florida, US). Thirty human, extracted, single rooted teeth were used. Orthograde root canal treatment, root resection (3mm shorter than the apex) and retrograde cavity preparation with ultrasonic tips were performed. Teeth were divided into 3 groups (n =10 each) following a stratified randomization according to the initial volume of the root-end cavity. After retrofilling, samples were stored for 7 days. Then, two rounds of micro-CT scans were performed: soon after root-end preparation (with the cavity still empty) and 7 days after root-end filling. Marginal gaps, internal voids volume (mm3 and %), as well as, the overall defects (sum of gaps and voids) were evaluated. Statistics compared the three groups in relation to those defects. There was not statistical difference between groups regarding the marginal gaps (P≥ 0.05), the internal voids (P≥ 0.05), and the overall defects (P≥ 0.05). Median (mm3) and % of overall air-entrapment defects (gaps and/or voids) was: 0.004mm3 and 1.749% for MTA Angelus, 0.018mm3 and 6.660% for Biodentine, and 0.012mm3 and 4.079% for Neo MTA Plus. All materials had gaps and/or voids. No differences were found between MTA Angelus, Biodentine and Neo MTA Plus.


Resumo Este estudo avaliou a qualidade 3D de retro-obturações, avaliando a presença (volume e percentagem) de "gaps" marginais e "voids" internos formados a partir da retro-obturação com três materiais à base de silicato de cálcio: MTA Angelus (Angelus Soluções Odontológicas, Londrina, PR, Brasil), Biodentine (Septodont Ltd., Saint Maur-des-Faussés, França) and Neo MTA Plus (Avalon Biomed Inc., Bradenton, Flórida, US). Trinta dentes humanos unirradiculares extraídos foram usados. Após tratamento de canal ortrógrado, resecção radicular (3 mm apicais), o prepare da cavidade retrógrada com pontas ultrassônicas foi realizado. Os dentes foram divididos em três grupos (n= 10 cada) seguindo uma randomização estratificada, de acordo com o volume inicial da cavidade retrógrada. Depois da retro-obturação as amostras foram armazenadas por 7 dias. Duas rodadas de escaneamento de micro-CT foram realizadas: logo após o preparo retrógrado (com a cavidade ainda vazia) e 7 dias após a retro-obturação. O volume de "gaps" marginais e de "voids" internos (mm3 e %), bem como, os defeitos totais (soma de "gaps" e "voids") foram avaliados. Não houve diferença estatística entre os grupos em relação aos "gaps" marginais (P≥ 0,05), "voids" internos (P≥ 0,05), e aos defeitos totais (P≥ 0,05). A mediana (mm3) e porcentagem dos defeitos totais de aprisionamento de ar foi 0,004mm3 e 1,749% para o MTA Angelus, 0,018mm3 e 6,660% para o Biodentine, e 0,012mm3 e 4,079% para o Neo MTA Plus. Todos os materiais tiveram defeitos ("gaps"e/ou "voids"). Não houve diferença entre MTA Angelus, Biodentine e Neo MTA Plus.


Subject(s)
Humans , Root Canal Filling Materials , Root Canal Obturation , Root Canal Therapy , Silicates , Calcium Compounds , X-Ray Microtomography
6.
Braz. dent. j ; 32(3): 21-31, May-June 2021. tab, graf
Article in English | LILACS, BBO | ID: biblio-1345507

ABSTRACT

Abstract This study assessed the fracture resistance of simulated immature teeth reinforced with calcium aluminate cement (CAC) or mineral trioxide aggregate (MTA) containing calcium carbonate nanoparticles (nano-CaCO3). The microstructural arrangement of the cements and their chemical constitution were also evaluated. Forty-eight canines simulating immature teeth were distributed into 6 groups (n=8): Negative control - no apical plug or root canal filling; CAC - apical plug with CAC; CAC/nano-CaCO3 - apical plug with CAC+5% nano-CaCO3; MTA - apical plug with MTA; MTA/nano-CaCO3 - apical plug with MTA+5% nano-CaCO3; and Positive control - root canal filling with MTA. The fracture resistance was evaluated in a universal testing machine. Samples of the cements were analyzed under Scanning Electron Microscope (SEM) to determine their microstructural arrangement. Chemical analysis of the cements was performed by Energy Dispersive X-ray Spectroscopy (EDS). The fracture resistance of CAC/nano-CaCO3 was significantly higher than the negative control (p<0.05). There was no significant difference among the other groups (p>0.05). Both cements had a more regular microstructure with the addition of nano-CaCO3. MTA samples had more calcium available in soluble forms than CAC. The addition of nano-CaCO3 to CAC increased the fracture resistance of teeth in comparison with the non-reinforced teeth. The microstructure of both cements containing nano-CaCO3 was similar, with a more homogeneous distribution of lamellar- and prismatic-shaped crystals. MTA had more calcium available in soluble forms than CAC.


Resumo Este estudo avaliou a resistência à fratura de dentes imaturos simulados reforçados com cimento de aluminato de cálcio (CAC) ou trióxido agregado mineral (MTA) contendo nanopartículas de carbonato de cálcio (nano-CaCO3). O arranjo microestrutural dos cimentos e sua constituição química também foram avaliados. Quarenta e oito caninos simulando dentes imaturos foram distribuídos em 6 grupos (n=8): Controle negativo - sem plug apical ou obturação do canal radicular; CAC - plug apical com CAC; CAC/nano-CaCO3 - plug apical com CAC + 5% nano-CaCO3; MTA - plug apical com MTA; MTA/nano-CaCO3 - plug apical com MTA + 5% nano-CaCO3; e Controle positivo - obturação dos canais radiculares com MTA. A resistência à fratura foi avaliada em máquina universal de ensaios. Amostras dos cimentos foram analisadas em Microscópio Eletrônico de Varredura (MEV) para determinar seu arranjo microestrutural. A análise química dos cimentos foi realizada por Espectroscopia de Energia Dispersiva de Raio-X (EDS). A resistência à fratura de CAC/nano-CaCO3 foi significativamente maior do que o controle negativo (p<0,05). Não houve diferença significativa entre os outros grupos (p>0,05). Ambos os cimentos apresentaram microestrutura mais regular com a adição de nano-CaCO3. As amostras de MTA apresentaram mais cálcio disponível em formas solúveis do que CAC. A adição de nano-CaCO3 ao CAC aumentou a resistência à fratura dos dentes em comparação aos dentes não reforçados. A microestrutura de ambos os cimentos contendo nano-CaCO3 foi semelhante, com uma distribuição mais homogênea de cristais de formato lamelar e prismático. MTA apresentou mais cálcio disponível nas formas solúveis do que CAC.


Subject(s)
Humans , Root Canal Filling Materials , Tooth Fractures , Oxides , Root Canal Obturation , Silicates , Calcium Compounds , Aluminum Compounds , Tooth Apex , Dental Cements , Drug Combinations
7.
Rev. Asoc. Odontol. Argent ; 109(1): 9-19, ene.-abr. 2021. ilus, tab
Article in Spanish | LILACS | ID: biblio-1255416

ABSTRACT

Objetivo: Estimar y comparar la eficacia de diferentes técnicas de obturación para impedir el flujo de colorante a través de los conductos laterales. Materiales y métodos: Se emplearon 50 premolares inferiores extraídos y conservados en formol neutro al 5% hasta el momento de su uso, a los cuales se les realizaron conductos laterales artificiales. Una vez instrumentados los conductos principales, los dientes fueron divididos al azar en 5 grupos (n=10) para ser obturados con cuatro técnicas distintas: A) System B + inyección de gutapercha termoplástica del sistema Elements, Extruder; B) obturadores de Thermafil, ProTaper Universal; C) técnica híbrida y D) obturación con inyección de gutapercha termoplástica del sistema Elements, Extruder. Inmersos en tinta china y diafanizadas las raíces, se evaluó la longitud de penetración de la tinta en los conductos laterales. Se empleó el análisis de la varianza para detectar diferencias significativas (P<0,05) entre los niveles medios de penetración del colorante según las técnicas de obturación y las zonas del diente, y se efectuaron pruebas de rango múltiple (HSD de Tukey) para realizar comparaciones dos a dos, manteniendo fija la tasa de error por familia. Resultados: A la técnica B le correspondió el valor medio más bajo (30,63%) de penetración de tinta china. Los valores medios más elevados (54,52% y 51,74%) correspondieron a las técnicas A y C, respectivamente. Conclusión: Ninguna de las técnicas de obturación del conducto radicular empleadas ha sido capaz de impedir la filtración del colorante en los conductos laterales (AU)


Aim: To estimate and compare the different obturation techniques to avoid the flow of colorant through lateral canals. Materials and methods: 50 extracted lower premolars preserved in 5% neutral formol until the moment of use, had artificial lateral canals made. Once canals were instrumented, the teeth were randomly divided into 5 groups (n=10) to be filled with four different techniques: A) System B + injection of thermoplastic gutta-percha, Elements system, Extruder; B) Thermafil, ProTaper Universal obturators; C) hybrid technique, and D) injection of thermoplastic gutta-percha, Elements system, Extruder. Having immersed the premolars in India ink and diaphanized the roots, the penetration length of the India ink inside the canals was assessed. Analysis of variance was used to detect significant differences (P<0.05) between the mean levels of dye penetration according to the filling techniques and tooth areas, and multiple range tests (Tukey's HSD) were performed for two-to-two comparisons, keeping the error rate per family fixed. Results: Technique B had the lowest mean value (30.63%) of penetration. The highest mean values (54.52% and 51.74%) corresponded to techniques A and C, respectively. Conclusion: No obturation technique of the root canal used was able to avoid filtration of colourant in the lateral canals (AU)


Subject(s)
Humans , Root Canal Obturation , Dental Leakage/diagnosis , Gutta-Percha , Root Canal Filling Materials/chemistry , Bicuspid/anatomy & histology , Transillumination/methods , Statistical Analysis , Dental Pulp Cavity/anatomy & histology
8.
Dent. press endod ; 11(1): 16-28, Jan-Apr2021. Ilus
Article in English | LILACS | ID: biblio-1348158

ABSTRACT

Introdução: Os acessos endodônticos minimamente invasivos (AEMI) surgiram com o intuito de, por meio da preservação de estrutura dentária, manter a resistência à fratura de dentes tratados endodonticamente. A partir do primeiro estudo, em 2010, vários trabalhos foram desenvolvidos buscando entender qual a influência dos AEMI na resistência à fratura de dentes tratados endodonticamente. No entanto, interferências coronárias causadas pelos AEMI poderiam prejudicar a realização dos procedimentos subsequentes à cavidade de acesso, como a localização, instrumentação, limpeza, descontaminação e obturação dos canais radiculares. Objetivo: Com base nessa premissa, a presente revisão teve como objetivo responder algumas perguntas para que o clínico entenda quais são as principais modalidades de AEMI, os impactos da sua abordagem no tratamento endodôntico e o verdadeiro papel do tratamento endodôntico na perda dos elementos dentários. Resultados: Considerando os dados disponíveis até o presente momento, faltam evidências robustas para apoiar a alegação de que os AEMIs preservem a resistência à fratura dos elementos tratados endodonticamente melhor do que nos dentes acessados de maneira tradicional. Além disso, cavidades de acesso minimamente invasivas podem interferir em outras etapas do tratamento endodôntico, podendo torná-lo imprevisível. Conclusão: Dessa forma, pode-se concluir que há uma falta de evidências que apoiem a utilização de cavidades de acesso minimamente invasivas na prática clínica de rotina e/ou no processo de formação de alunos de graduação e pós-graduação (AU).


Introduction: Minimally invasive access cavities emerged aiming to maintain the fracture resistance of endodontically treated teeth through the preservation of dental structure. Starting with the first study in 2010, several others were developed to evaluate the influence of minimally invasive access cavities in the fracture resistance of endodontically treated teeth. However, the coronal interference caused by those access cavities could impair the subsequent procedures of root canal treatment, such as the location, instrumentation, cleaning, disinfection and filling of the root canals. Objective: Based on this premise, the aim of the present review was to answer some questions so that the clinician knows the main modalities of minimally invasive access cavities, the impacts of this approach and the real role of endodontic treatment in the tooth loss. Results: Considering the available data, there is a lack of robust evidence in literature to support the claim that the minimally invasive access cavities preserve the fracture resistance of endodontically treated teeth better than the traditional one. In addition, these access cavities can interfere in other stages of endodontic treatment, making it unpredictable. Conclusion: Thus, it can be concluded that there is a lack of evidence to support the use of minimally invasive access cavities in routine clinical practice and/or in the process of training undergraduate and graduate students (AU).


Subject(s)
Humans , Root Canal Obturation , Therapeutics/methods , Dental Pulp Cavity , Endodontists , Students , Decontamination
9.
Dent. press endod ; 11(1): 35-39, Jan-Apr2021. Tab
Article in English | LILACS | ID: biblio-1348160

ABSTRACT

Introdução: O tratamento endodôntico busca sanificar o sistema de canais radiculares para permitir adequada obturação tridimensional. Para tanto, necessita-se de materiais plásticos, como a guta-percha, associados a cimentos endodônticos com adequadas características físico-químicas. Métodos: Comparação das propriedades físico-químicas tempo de endurecimento e escoamento dos cimentos endodônticos AH Plus e Sealer Plus, de acordo com a especificação 57 da American National Standard Institute/American Dental Association para materiais obturadores. Resultados: O tempo de endurecimento do AH Plus foi de 1178 minutos e do Sealer Plus foi de 422 minutos. O escoamento do APlus foi de 3259 milímetros e do Sealer Plus, 3150 milímetros. Conclusões: O tempo de endurecimento do AH Plus foi maior quando comparado ao do cimento Sealer Plus, e não houve diferença estatística no escoamento entre os cimentos estudados (AU).


Introduction: Endodontic treatment seeks to sanitize the root canal system to allow adequate three-dimensional filling, for which plastic materials such as guttapercha are required, associated with endodontic cements with adequate physico-chemical characteristics. Methods: Comparison of the physico-chemical properties hardening and flow time of the AH Plus and Sealer Plus endodontic sealers according to the American Dental Association / American Dental Association Specification 57 for sealing materials. Results: The hardening time of the AH Plus was 1178 minutes and the Sealer Plus was 422 minutes. The AH Plus flow was 3259 millimeters and the Sealer Plus was 3150 millimeters. Conclusions: The AH Plus hardening time was higher when compared to the Sealer Plus cement and there was no statistical difference in the flow between the cements studied (AU).


Subject(s)
Humans , Root Canal Obturation , Dental Cements , Gutta-Percha , Chemical Properties , Dental Pulp Cavity
10.
Dent. press endod ; 11(1): 54-62, Jan-Apr2021.
Article in English | LILACS | ID: biblio-1348190

ABSTRACT

Objetivo: O presente estudo avaliou a influência de materiais obturadores endodônticos na produção de artefato de imagens de tomografia computadorizada de feixe cônico (TCFC), por meio da análise de densidade de imagem em incisivos centrais e dentes pré-molares unirradiculares. Métodos: Os dentes foram submetidos a instrumentação endodôntica e divididos em cinco grupos: um grupo controle (sem preenchimento endodôntico) e quatro grupos teste, cada um preenchido por um material obturador endodôntico diferente (PulpCanal Sealer, AHPlus, Sealer26 e BCSealer). Após a aquisição da TCFC, as imagens foram avaliadas para determinar variações de tons de cinza nos três terços da raiz (análise objetiva). A segunda análise (subjetiva) comparou o grupo controle com dois dos grupos teste, em um processo randomizado. Resultados: Na análise objetiva, o Sealer26 e o BCSealer mostraram diferença estatística para valores mínimos, em comparação com outros materiais obturadores endodônticos, para dentes anteriores e posteriores. Para valores máximos, apenas o grupo controle diferiu estatisticamente dos grupos teste. Ao comparar os valores dos pré-molares e dos incisivos centrais em tons cinza pelo teste de Kruskal-Wallis, foi encontrada diferença estatisticamente significativa para os valores mínimos. Na análise subjetiva, para dentes anteriores e posteriores, o PulpCanal Sealer foi o material mais frequentemente apontado pelos observadores como aquele que produziu mais interferência de artefato. Conclusões: Os materiais obturadores endodônticos nos dentes posteriores apresentaram comportamento semelhante; somente o PulpCanal Sealer no terço apical apresentou diferenças estatísticas em relação aos demais grupos. Para os dentes anteriores, o BCSealer apresentou valores mínimos maiores em relação aos outros materiais obturadores endodônticos, o que poderia representar maior interferência do artefato (AU).


Objective: This study evaluated the influence of canal obturation materials in the production of cone beam computed tomography (CBCT) images artifact, by means of image density analysis and comparison between four materials in central incisors and monoradicular premolar teeth. Materials and Methods: The teeth were submitted to endodontic instrumentation and divided into 5 groups: one control group (no endodontic filling) and four test groups each one filled by a different endodontic sealer (PulpCanal Sealer, AHPlus, Sealer26 and BCSealer). After CBCT scanning, the images were assessed to determine grayscale variations in three root thirds (objective analysis). The second (subjective) analysis compared the control group with two of the test groups in a randomized process. Results: In the objective analysis, Sealer26 and BCSealer showed statistical difference for minimum values, in comparison with another sealers, for both anterior and posterior teeth. For maximum values, only control group differed statistically from test groups. When comparing premolars and central incisors grayscale values by ANOVA analysis, a statistically significant difference was found mainly for minimum values. At the subjective analysis, for both anterior and posterior teeth, PulpCanal Sealer was the filling most frequently appointed by the observers as the one that produced more artifact interference. Conclusion: Endodontic fillings at posterior teeth performed similar behavior. Only PulpCanal Sealer on apical third presented higher maximum values in relation to others groups, which could represent more white brands. For anterior teeth, BC Sealer performed higher minimum values in relation to other endodontic fillings, which could represent more dark bands (AU).


Subject(s)
Humans , Root Canal Obturation , In Vitro Techniques , Materials , Cone-Beam Computed Tomography , Artifacts , Endodontics
11.
Dent. press endod ; 11(1): 84-91, Jan-Apr2021. Tab, Ilus
Article in English | LILACS | ID: biblio-1348271

ABSTRACT

Introdução: A obturação do canal radicular tem sido considerada um fator decisivo no sucesso do tratamento endodôntico. Objetivo: O objetivo da presente revisão sistemática foi avaliar estudos em animais que utilizaram parâmetros histopatológicos para determinar a influência da obturação do canal radicular no processo de reparo da periodontite apical. Métodos: As buscas foram realizadas nas bases de dados PubMed, Lilacs, Scielo, Science Direct e BBO, utilizando palavras-chave indexadas e não indexadas. Foram considerados artigos publicados no período de 2003 a 2019, e aplicados critérios de inclusão e exclusão para seleção dos artigos. Resultados: Cinco artigos atenderam aos critérios de elegibilidade e foram incluídos para análise qualitativa na revisão sistemática. Conclusão: A obturação do canal radicular, no que diz respeito ao seu limite apical, pode influenciar o reparo da periodontite apical, quando há presença de bactérias remanescentes no interior do canal. O uso de cimentos endodônticos com propriedades antimicrobianas não foi efetivo na eliminação de bactérias residuais do canal radicular e na reparação completa da periodontite apical.


Introduction: Root canal fillings are a decisive factor in the success of endodontic treatment. This systematic review evaluated animal studies using histopathological parameters to determine the effect of root canal filling on the healing of apical periodontitis. Methods: A search was conducted in PubMed, Lilacs, Scielo, Science Direct and BBO using indexed and non-indexed keywords. Studies published from 2003 to 2019 were selected according to inclusion and exclusion criteria. Results: Five animal studies met eligibility criteria and were included in the systematic review for a qualitative analysis. Conclusion: The extension of the root canal filling may affect the healing of apical periodontitis when bacteria remain in the canal. Root canal sealers with antimicrobial properties were not effective in eliminating bacteria remaining in the root canal, nor in promoting the complete healing of apical periodontitis (AU).


Subject(s)
Humans , Periapical Periodontitis , Root Canal Obturation , Bacterial Shedding , Dental Pulp Cavity , Evaluation Studies as Topic
12.
J. oral res. (Impresa) ; 10(1): 1-7, feb. 24, 2021. ilus, graf, tab
Article in English | LILACS | ID: biblio-1282565

ABSTRACT

Objective: The aim of this study was to assess the micro-push-out bond strength of a mineral-based root canal sealer, BioRoot RCS in canals prepared by K3XF rotary systems of two different tapers. Material and Methods: Eighty caries free maxillary central incisors were used in this study. The samples were allocated into 4 groups (n=20) according to the root canal sealer and taper of the rotary instruments. The samples were obturated using single cone obturation technique. From each root 1mm thick slices at coronal, middle and apical thirds were collected using hard tissue microtome under continuous water coolant. Push-out tests were done for these sections using a Universal testing machine (INSTRON 8801) at a crosshead speed of 1mm/min. One-way analysis of variance (ANOVA) was used to compare the bond strengths within groups and Tukey's multiple post hoc analysis was used for pair-wise comparison of bond strengths. Results: AH Plus exhibited higher micro-push-out bond strength than BioRootRCS though they did not differ significantly (p>0.05). Preparation of root canals with 6% taper rotary instruments showed higher bond strength than 4% though they did not differ significantly (p>0.05). Conclusion: There was no significant difference between micro-push-out bond strength values of BioRoot RCS and AH Plus. The bond strength values were high in 6% taper canals than 4% canals though the difference was not significant statistically.


Objetivo: El objetivo de este estudio fue evaluar la fuerza de unión por micro-expulsión de un sellador de conductos radiculares de base mineral, BioRoot RCS, en conductos preparados por sistemas rotativos K3XF con dos conos diferentes. Material y Métodos: En este estudio se utilizaron 80 incisivos centrales superiores libres de caries. Las muestras se distribuyeron en cuatro grupos (n = 20) de acuerdo al sellador del conducto radicular y al cono de los instrumentos rotativos. Las muestras se obturaron mediante la técnica de obturación de un solo cono. De cada raíz se recogieron rodajas de 1 mm de grosor en los tercios coronal, medio y apical utilizando un micrótomo de tejido duro con refrigeración continua por agua. Posteriormente, se realizó una prueba de expulsión para estas secciones utilizando una máquina de prueba universal (INSTRON 8801) a una velocidad del cabezal transversal de 1mm/min. Se utilizó el análisis de varianza unidireccional (ANOVA) para comparar las resistencias de la unión dentro de los grupos y el análisis post hoc multiple de Tukey se utilizó para la comparación por pares de las resistencias de la unión. Resultados: AH Plus exhibió una fuerza de unión de micro-expulsión más alta que BioRootRCS, aunque no difirieron significativamente (p>0,05). La preparación de los conductos radiculares con instrumentos rotativos ahusados al 6% mostró una fuerza de unión superior al 4%, aunque no difirieron significativamente (p>0,05). Conclusión: No hubo diferencias significativas entre los valores de fuerza de unión de micro-expulsión de BioRoot RCS y AH Plus. Los valores de la fuerza de unión fueron más altos en canales cónicos al 6% que en canales al 4%, aunque la diferencia no fue significativa estadísticamente.


Subject(s)
Humans , Root Canal Filling Materials , Root Canal Obturation/methods , Dentin-Bonding Agents , Flexural Strength , Resins, Synthetic , Analysis of Variance , Root Canal Preparation , Dental Pulp Cavity , Epoxy Resins/chemistry , Minerals
13.
Braz. dent. j ; 32(1): 104-110, Jan.-Feb. 2021. graf
Article in English | LILACS, BBO | ID: biblio-1180730

ABSTRACT

Abstract These case reports aimed to describe the management of lateral perforation in the middle cervical third of the root in two maxillary incisors with pulp canal calcification using Bio-C Repair, with safe and viable clinical treatment strategies. Digital radiographic exams were obtained with different angles and analyzed using different filters. Cone-beam computed tomography (CBCT) images were requested to show the actual position of the canal, location of the perforation, and guide the strategic planning of the case. Subsequently, cavity access was prepared with the aid of dental operating microscopy. After perforation was identified, granulation tissue was removed and the original canal was identified and then dressed with calcium hydroxide. In the second visit, the perforation was filled with Bio-C Repair and the canal system filled with gutta-percha points and a root canal sealer (Bio-C Sealer). The teeth were restored with glass fiber post, 4 mm beyond the perforation level, and provisory crowns. Both teeth treated as described above were functional and asymptomatic with a 1-year clinical and radiographic assessment. The Bio-C Repair is suggested as a new cement option for the management of lateral canal perforations, with effective results as observed after a one-year follow-up.


Resumo O presente relato de caso teve como objetivo descrever o manejo da perfuração lateral no terço médio cervical da raiz em dois incisivos superiores com calcificação pulpar utilizando o Bio-C Repair, com estratégias de tratamento clínico seguras e viáveis. Radiografias digitais foram obtidas em diferentes ângulos e analisadas com diferentes filtros. Imagens de tomografia computadorizada de feixe cônico (TCFC) foram solicitadas para mostrar a real posição do canal e a localização da perfuração, e orientar o planejamento estratégico do caso. Posteriormente, o acesso à cavidade foi preparado com auxílio de microscopia cirúrgica. Após a identificação da perfuração, o tecido de granulação foi removido, o canal original foi identificado e, em seguida, recebeu medicação intracanal à base de hidróxido de cálcio. Na segunda visita, a perfuração foi selada com Bio-C Repair e o sistema de canais obturado com cones de guta-percha e cimento endodôntico (Bio-C Sealer). Os dentes foram restaurados com pino de fibra de vidro, 4 mm além do nível da perfuração, e coroas provisórias. Ambos os dentes tratados conforme descrito acima se mostraram funcionais e assintomáticos na avaliação clínica e radiográfica de 1 ano. O Bio-C Repair é sugerido como uma nova opção de cimento endodôntico para o manejo de perfurações laterais, com resultados efetivos observados após um ano de acompanhamento.


Subject(s)
Humans , Root Canal Filling Materials , Root Canal Preparation , Root Canal Obturation , Calcium Hydroxide , Dental Pulp Cavity , Gutta-Percha
14.
Braz. dent. j ; 32(1): 42-47, Jan.-Feb. 2021. tab, graf
Article in English | LILACS, BBO | ID: biblio-1180727

ABSTRACT

Abstract New methodologies using micro-CT to evaluate solubility besides dimensional and morphological changes of endodontic materials are proposed. However, there is no standardization in the methods. The aim of this study was to assess the effect of different dimensions of test samples on volumetric change evaluation of different endodontic materials. AH Plus, FillCanal and Sealapex root canal sealers, Biodentine, IRM and MTA root-end filling cements were used in the tests. Samples of each material with a thickness of 1.5 mm and different diameters were manufactured: 6.3, 7.75, and 9.0 mm. The samples were scanned in micro-computed tomography (micro-CT) after setting and after 7 days of immersion in distilled water. The volumetric change was evaluated by means of the difference in the total volume of the specimens before and after immersion. Data were submitted to ANOVA and Tukey tests (p<0.05). The size of the samples did not affect the percentage of volumetric change of the materials (p>0.05). All sample sizes had greater volume loss for Sealapex among the sealers and Biodentine for the cements (p<0.05). In conclusion, Biodentine and Sealapex had the highest volume loss after immersion. Samples with 1.5 mm thickness, and diameters ranging between 6.3 and 9.0 mm can be used to assess the stability of endodontic materials using micro-CT without affecting the percentage of volumetric change.


Resumo Novas metodologias utilizando micro-CT são propostas para avaliar a solubilidade além de alterações dimensionais e morfológicas em materiais endodônticos. No entanto, não há padronização nos métodos. O objetivo deste estudo foi avaliar o efeito de diferentes dimensões de corpos de prova na avaliação da alteração volumétrica de diferentes materiais endodônticos. Os cimentos obturadores AH Plus, FillCanal e Sealapex e os cimentos retrobturadores Biodentine, IRM e MTA foram utilizados nos testes. Foram confeccionadas amostras de cada material com espessura de 1.5 mm e diâmetros diferentes: 6.3, 7.75 e 9.0 mm. As amostras foram escaneadas em microtomografia computadorizada (micro-CT) após a presa e após 7 dias de imersão em água destilada. A alteração volumétrica foi avaliada por meio da diferença no volume total dos corpos de prova antes e após a imersão. Os dados foram submetidos aos testes ANOVA e Tukey (p<0,05). A dimensão das amostras não afetou o percentual de alteração volumétrica dos materiais (p>0,05). Todos os diâmetros de amostra mostraram maior perda de volume para Sealapex entre os cimentos obturadores e Biodentine entre os cimentos retrobturadores (p<0,05). Como conclusão, Biodentine e Sealapex mostraram a maior perda volumétrica após a imersão. Amostras com 1.5 mm de espessura e diâmetros variando entre 6.3 e 9.0 mm podem ser usadas para avaliação da estabilidade de materiais endodônticos utilizando micro-CT, sem influenciar no percentual de alteração volumétrica.


Subject(s)
Root Canal Filling Materials , Oxides , Root Canal Obturation , Materials Testing , Calcium Compounds , Drug Combinations , Epoxy Resins , X-Ray Microtomography
15.
J. appl. oral sci ; 29: e20200870, 2021. tab, graf
Article in English | LILACS | ID: biblio-1250190

ABSTRACT

Abstract Bio-C Pulpecto (Bio-CP) was recently developed as the first bioceramic root filling material for primary teeth. Objective To evaluate the physicochemical properties of radiopacity, setting time, pH, cytocompatibility and potential of Bio-CP to induce mineralisation, compared with (1) Calen thickened with zinc oxide (Calen-ZO), and (2) zinc oxide and eugenol (ZOE). Methodology Physicochemical properties were evaluated according to ISO 6876. Saos-2 (human osteoblast-like cell line) exposed to extracts of the materials were subjected to assays of methyl thiazolyl tetrazolium, neutral red, alkaline phosphatase (ALP) activity and mineralised nodule production. The results were analysed using one-way or two-way ANOVA and Tukey's or Bonferroni's post-tests (α=0.05). Results All the materials showed radiopacity higher than 3 mm Al. Bio-CP had lower pH than Calen-ZO, but higher pH than ZOE. Calen-ZO and Bio-CP did not set. The setting time for ZOE was 110 min. The cytocompatibility order was Calen-ZO > Bio-CP > ZOE (1:2, 1:4 dilutions) and Calen-ZO > Bio-CP = ZOE (1:12, 1:24 dilutions) and Calen-ZO = Bio-CP > ZOE (1:32 dilution). Bio-CP induced greater ALP activity at 7 days, and greater mineralised nodule production, compared to Calen-ZO (p<0.05). Conclusions Bio-CP showed adequate physicochemical properties, cytocompatibility and potential to induce mineralisation.


Subject(s)
Humans , Root Canal Filling Materials , Dental Pulp Cavity , Osteoblasts , Root Canal Obturation , Tooth, Deciduous , Zinc Oxide-Eugenol Cement , Biology
16.
Rev. Ateneo Argent. Odontol ; 64(1): 13-17, 2021. ilus
Article in Spanish | LILACS | ID: biblio-1248251

ABSTRACT

Se presenta un caso clínico de fractura radicular del tercio medio, de pieza 2.1 con desplazamiento de los cabos de fractura. Es tratado con un novedoso procedimiento terapéutico, mediante la utilización de un biomaterial de tercera generación osteoconductor, osteogénico y osteoinductor. Se obtiene la reparación del tejido conectivo interproximal y la formación de tejido calcificado (AU)


We present a clinical case of root fracture of the middle third, piece 2.1 with displacement of the fracture ends. It is treated with a novel therapeutic procedure, using a thirdgeneration osteoconductive, osteogenic and osteoinductive biomaterial. Interproximal connective tissue repair and calcified tissue formation are obtained (AU)


Subject(s)
Humans , Male , Adolescent , Tooth Fractures/therapy , Tooth Root/injuries , Biocompatible Materials , Regenerative Endodontics/methods , Osteogenesis , Root Canal Obturation/instrumentation , Tooth Root/diagnostic imaging , Wound Healing/physiology , Dental Fistula/radiotherapy , Dentition, Permanent
17.
Article in English | WPRIM | ID: wpr-887757

ABSTRACT

OBJECTIVES@#The safety of root canal filling with 200 °C hot gutta-percha was investigated to study the effect of continuous wave technique combined with high-temperature injectable gutta-percha condensation technique on the surface temperature of periodontal tissue.@*METHODS@#CT technique and Mimics, Geomagic, and Solidworks software were utilized to build the entity models of alveolar bone, dentin and root canal, periodontal ligament, and blood flow, respectively, which were then assembled in Solidworks into a finite element model of tooth with blood flow. By utilizing ABAQUS collaborative simulation platform, fluid-structure coupling was analyzed on the whole process of root canal filling. Consequently, the surface temperature of the periodontal tissue was obtained.@*RESULTS@#In the absence of blood flow, the temperature of the periodontal ligament surface reached 50.048 ℃ during root canal filling with 200 ℃ gutta-percha. Considering blood flow, the temperature of periodontal ligament surface was 39.570 ℃.@*CONCLUSIONS@#The temperature of the periodontal ligament surface increased when the continuous wave root canal was filled with 200 ℃ gutta-percha, and the periodontal tissue was not damaged.


Subject(s)
Dental Pulp Cavity , Finite Element Analysis , Gutta-Percha , Hot Temperature , Humans , Periodontium , Root Canal Filling Materials , Root Canal Obturation , Temperature
18.
Braz. oral res. (Online) ; 35: e028, 2021. tab, graf
Article in English | LILACS, BBO | ID: biblio-1153621

ABSTRACT

Abstract The aim of this study was to evaluate the filling ability of a new ready-to-use calcium silicate-based sealer using thermoplastic or single-cone technique in flattened root canals. Twenty-four flattened distal canals of mandibular molars with a buccolingual diameter 4 or more times larger than the mesiodistal diameter were selected. The root canals were prepared and filled (n = 12), according to the following techniques: thermoplastic or single-cone technique using Bio-C Sealer. The teeth were scanned using Skycan 1176 micro-computed tomography (micro-CT) - voxel size 8.74 µm, before and after filling the root canal. The percentage of voids in the filled root canals was evaluated, and the data were statistically analyzed using the unpaired t-test (α = 0.05). The root canals filled using the thermoplastic technique created a smaller percentage of voids in the cervical/middle thirds than those filled using the single-cone technique (p < 0.05). There was no difference in the percentage of voids using either technique in the apical third (p > 0.05). The flattened root canals in the cervical/middle thirds were better filled using the ready-to-use calcium silicate-based sealer associated to the thermoplastic technique, compared with the single-cone technique. In the apical third, the techniques showed similar filling ability.


Subject(s)
Root Canal Filling Materials , Dental Pulp Cavity/diagnostic imaging , Root Canal Obturation , Root Canal Preparation , X-Ray Microtomography , Gutta-Percha , Molar
19.
Article in English | LILACS, BBO | ID: biblio-1287493

ABSTRACT

ABSTRACT Objective: To evaluate the success rates of resin-based endodontic surgery (RES) and endodontic microsurgery (EMS), and compare their results. Material and Methods: A total of 19 and 34 full-text papers were reviewed, and finally, 2 and 6 studies were selected for RES and EMS, respectively. The stages of the study selection process were illustrated in Figure 1. The demographic characteristics were also described using the IBM SPSS Software, and the meta-analysis was fulfilled via Stata V.14. Results: A total number of 811 teeth were analyzed in this systematic review and meta-analysis, with a mean follow-up of 38.63 months. Besides, the results of the meta-analysis indicated that both methods not only differed in terms of implementation but also produced varying outcomes. Accordingly, EMS demonstrated a higher success rate likelihood with a significant difference from that of RES. Conclusion: An excellent proof was made available through this meta-analysis regarding the resin-based endodontic surgery success rate likelihood (79.9%) and an update for the endodontic microsurgery success rate possibility (100%).


Subject(s)
Root Canal Filling Materials , Root Canal Obturation , Surgery, Oral/instrumentation , Endodontics , Microscopy/methods , China , Data Interpretation, Statistical , Microscopy/instrumentation
20.
Article in English | LILACS, BBO | ID: biblio-1250454

ABSTRACT

ABSTRACT Objective: To evaluate resin- and bioceramic root canal sealers affect postoperative intensity and pain occurrence. Material and Methods: From the electronic databases, PubMed, Cochrane Library, Embase, ISI have been used to perform systematic literature until September 2020. Electronic titles were managed using the Endnote X8 software. They performed searches with mesh terms. Two reviewers blindly and independently extracted data from studies that included data for data extraction. Results: A total of 186 potentially relevant titles and abstracts were found. Finally, four studies were included. Pain score was (RR = -0.20; 95% CI -1.09-0.68; p= 0.65). This result showed no statistically significant difference for the resin-based and bioceramic root canal sealers after 24 hours between the VAS scores. Conclusion: Postoperative pain was low in Patients requiring root canal retreatment and obturated with resin-based or bioceramic-based sealers without extrusion beyond the apex. No differences were observed between postoperative pain in resin-based and bioceramic root canal sealers 24 and 48 hours postoperatively.


Subject(s)
Pain, Postoperative , Root Canal Filling Materials , Root Canal Obturation/instrumentation , Endodontics , Randomized Controlled Trials as Topic/methods , Composite Resins , Systematic Reviews as Topic
SELECTION OF CITATIONS
SEARCH DETAIL