[Investigation of industrial waste management in industries located between Tehran and Karaj zone in 2009-2010]

In recent years, poor industrial waste managements have created many crises in human societies. The aim of this study was to investigate industrial waste management located between Tehran and Karaj zone in 2009-2010. This study is descriptive and sectional which was done by site visits, [Iranian environmental protection organization] use of questionnaires, database production and results analysis. The questionnaire consisted of 45 questions mainly about industrial waste; quantity, quality and management. Total number of industries with over 50 personnel's, calculated as 283. Class-weighted sampling was used in which the sample size contained 50 industries. Total generated industrial waste was 123451, kg per day. Major hazardous waste generated in industrial sections included: chemical and plastic making. About 45.28% of waste generated disposed by private sectors. Landfill with 62% and reuse with 17% were the first and second alternative of common methods for final disposal of solid waste in this zone. In order to reduce hazardous waste generation in this zone, reuse and recovery maximization of the waste must be noted in short-term. In long-term, some industries such as chemical-plastic and electronics which have high rate of hazardous waste production must be replaced with other industries with low rate production, such as wood-cellulose and paper industries

[Quantitative and qualitative investigation of industrial solid waste in industrial plants located between Tehran and Karaj]

Rapid population growth, industrial development, urbanization culture propagation and excessive material consumption are the most important factor which caused over increasing of municipal, industrial and agricultural waste in human society. Inappropriate disposal of generated waste in recent years created several environmental menace and crisis in human society. For investigation about existent situation of industrial waste generation questionnaire had been used. This questionnaire was catered by Iran environmental protection organization. Aforementioned questionnaire contained 45 questions about combination, quality and quantity of industrial waste. Total number of more than 50 personnel industry was 287. But sample contained 50 randomly selected industries. Gathered data have been analyzed with SPSS 18. Total generated industrial waste was 123451KG per day which had volume equal to 781 cubic meters per day. Generated waste capitation per every worker was 5.8 KG. Maximum frequency of industrial was related to machinery and equipment group which maximum generated waste was related to this industrial group too. Maximum hazardous waste was for inflammable waste with 34 weight percent. Major hazardous waste generating industrial was chemical and plastic making industry. Yielded result from this investigation has shown that significant relation existed between waste production rate and personnel number. The more personnel are, the more waste production increase

[Investigation of E. coli removal from polluted water using electrolysis method]

The conventional chemical and physicalmethods for water disinfection include the application of ultraviolet [UV], chlorination, and ozonation. Water disinfection by electrochemical methods has been increasingly carried out recently. The goal of this applied - analytical research is to investigate the removal of E. coli bacteria, as the index of water microbial contamination, from drinking water by electrochemistry method. In this study, the contaminated water sample was prepared through adding 102 and 103 E. coli bacteria per ml of drinking water. The contaminated water entered into the electrochemical reactor and different conditions were studied, included pH [6, 7, and 8], number of bacterium [102 and 103 per milliliter], time [5, 10, 20, and 40 min], distance between electrodes [2, 2.5, 3, and 3.5 cm], and voltage [10, 20, 30, and 40 volts]. The findings indicated the indirect correlation between bacteria removal efficiency and the variable distances between two electrode. The results indicated the direct correlation between bacteria removal efficiency and the variables voltage and electrolysis times. The results showed that the best conditions for removal of 102 and 103 bacteria per milliliter obtained at pH 7, electrolysis time of 10 min, distance between electrodes 2 cm, in the voltage 20 and 30 volts, respectively. The results of this study indicate that voltage and electrolysis time have the most significant effect on electrolysis efficiency. Research findings showed that electrolysis is a promising method for removal of E. coli bacterium from drinking water

[Survey of ability of activated sludge isolated bacteria in removal of RB-B dyestuff from aqueous medium]

Reactive dyestuff has potential of toxicity, carcinogenesis and mutagenesis for mammals and aquatic organisms. The current physical and chemical methods such as adsorption, coagulation, precipitation, filtration and. can been used for removing of dyestuff. Biological treatment which is effective and economic for decontamination of dyestuff wastewaters was preferred because of limitation and difficulty of physicochemical methods. In order to investigate the trend of pollution reduction of color compounds, ability of Remazol Black-B dyestuff removal from aqueous medium by bacterial consortium under anoxic conditions was studied. The mix culture of bacteria from textile industries activated sludge was enriched in luria broth medium containing RB-B dyestuff as a carbon source. Then biodegradation was assessed in 4 batch reactors. Microbial population of bacterial and decolorization quantities of samples were detected by MPN and UV-Vis spectrophotometer. Decolorization efficiency by the bacterial consortium was obtained more than 99% for 50 and 250 mg/L concentrations in 72 and 144 h [3 and 6 days] respectively, while for the initial concentration of 500 mg/L was 98.1in 240 h [10 days] of biodegradation period. Dyestuff reduction rate after completed removal was about 0.69, 1.74,2 mg/L/h for initial concentration of 50, 250, 500 mg/L respectively. Results showed that Alcaligenes denitrificans and Alcaligenes xylosoxidans bacteria which were isolated from activated sludge have good potential of RB-B dyestuff removal and this removal is depending on primary concentration of dye. Removal efficiency increased as primary concentration went up

Treatment of synthetic wastewater containing reactive red 198 by electrocoagulation process

Discharge of textile colored wastewater industries without providing enough treatment in water bodies, is harmful for human and aquatic organisms and poses serious damages to the environment. Most of conventional wastewater treatment methods don't have enough efficiency to remove textile dyes from colored wastewater; thus in this research the efficiency of electrocoagulation treatment process with aluminum electrodes for treatment of a synthetic wastewater containing C.I. Reactive Red 198 in batch reactor was studied. The experiment conducted in a Plexiglass reactor with a working volume of 2L that equipped with 4 aluminum electrodes. The effects of operating parameters such as voltage, time of reaction, initial dye concentration and interelectrode distance on the color removal efficiency, electrical energy consumption and electrode consumption were investigated. in the optimum operational condition electrocoagulation, is able to remove color and COD as high as 99.1 and 84.3% in aluminum electrode in 75 minutes at 20 volt and 2 cm interelectrode distance, respectively. Under this condition, operating cost was 2986 rails per cubic meter of treated wastewater. Increase in the interelectrode distance and initial dye concentration, lead to the decrease in efficiency of dye and COD removal. While as the voltage and time of reaction increased, energy consumption, electrode consumption, final pH and color removal, increased too. electrocoagulation process by aluminum electrode is an efficient and suitable method for reactive dye removal from colored wastewater

[Degradation of transformer oils by photolysis in order to reduce occupational and environmental hazards]

Polychlorinated biphenyls [PCBs] are toxic, persistent, bio-accumulate and pose a risk of causing adverse effects on human health and to the environment. PCB compounds exert varios impacts on human depending upon age, route of entry, intensity and frequency of exposure. This study was conducted to determine the effect of UV-C, hydrogen peroxide and solvent on the photodegradation of PCBs. The photochemical reactor was of annular geometry [500 ml volume] with a cylindrical low-pressure mercury lamp emitting at 254 nm. The power emitted by the lamp was 6 W. The whole lamp was immersed into a reactor with temperature of 32 +/- 2 C. The PCBs were analyzed by GC/ECD equipment. The degradation of total PCBs in terms of one, two and three lamps was 77.5%, 82.9% and 85.2% respectively. The degradation of total PCBs in terms of not using of H[2]O[2] and using 10% and 20% of H[2]O[2] were 74.5%, 79% and 94.5% respectively. The results of this experiments showed that UVC-photolysis of H[2]O[2] leads to a degradation efficiency of PCBs only in the presence of ethanol