RESUMEN
Objective:To investigate the feasibility and clinical efficacy of posterior vertebral column resection (PVCR) combined with polymethylmethacrylate-augmented pedicle screw instrumentation and shortening of spinal column for stage Ⅲ Kümmell's disease with very severe collapse of fractured vertebra.Methods:From January 2017 to September 2021, 9 patients with stage Ⅲ Kümmell's disease with very severe collapse of fractured vertebra underwent PVCR combined with polymethylmethacrylate-augmented pedicle screw instrumentation and shortening of spinal column. Their medical records were retrospectively analyzed. There were 1 male and 8 females, aged (66.9±5.8) years. The injured vertebra was located at T 11 in 2 patients, at T 12 in 4, at L 1 in 2 and at L 2 in 1. X-ray, CT and MRI were performed before operation. The posterior intervertebral heights of adjacent vertebral bodies of the fractured vertebra in the median sagittal position were measured on CT or MRI to evaluate the shortening of the spinal column before PVCR. Recorded were intraoperative bleeding volume, operation time, complications, bone graft fusion, and American Spinal Injury Association (ASIA) grading at preoperation and the last follow-up. The visual analogue scale (VAS) pain scores, Oswestry disability index (ODI) scores, and kyphotic cobb angles at preoperation, 1 week and 3 months postoperation, and the last follow-up were compared to evaluate the clinical efficacy of PVCR. Results:All patients underwent surgery successfully, with tight closure of adjacent vertebrae after resection of the injured vertebra and bone grafting. Operation time was (240.6±23.2) min and intraoperative bleeding (505.6±95.0) mL. The 9 patients were followed up for (17.3±5.6) months. No worsening symptoms of nerve injury, cerebrospinal fluid leakage, or other serious complications were found after operation, nor such complications as loosening or breakage of internal fixation or adjacent vertebral fractures. Bone fusion was achieved at the bone graft sites in all patients by the last follow-up. The VAS and ODI scores and cobb angles at 1 week and 3 months postoperation and at the last follow-up were significantly decreased compared with preoperation ( P<0.05). There were no significant differences in VAS scores or cobb angles among postoperative 1 week and 3 months and the last follow-up ( P>0.05), but pairwise comparisons between different time points after operation showed significant differences in ODI, with postoperative 1 week > postoperative 3 months > the last follow-up ( P<0.05). The ASIA grading at the last follow-up was improved from preoperative grade C to grade D in 2 cases, from preoperative grade C to grade E in 1 case and from preoperative grade D to grade E in 5 cases. Conclusion:PVCR combined with polymethylmethacrylate-augmented pedicle screw instrumentation and shortening of spinal column is a feasible and effective surgical treatment for stage Ⅲ Kümmell's disease with very severe collapse of fractured vertebra, leading to good clinical efficacy.
RESUMEN
Objective:To study the effect of thermal effect on the filling effect of bioceramic paste combined with thermal gel gutta-percha vertical obturation method in different parts of root canal.Methods:Forty single-root canal teeth samples were randomly and randomized divided into the control group, the iRoot SP group, the 10 s group and the 20 s group. All tooth samples were root canal prepared to 0.04 taper after crown removal. The control group received AH-plus paste combined with thermal gel gutta-percha vertical obturation. The iRoot SP group received iRoot SP single-point filling. The 10 s group and 20 s group received iRoot SP single-point filling combined with thermal gel gutta-percha vertical obturation, in which the root canal of the two groups were heated at 180 °C for 10 s and 20 s, respectively, before using the thermosetting gutta-percha. Methylene blue staining, scanning electron microscope (SEM) observation and dental microscope observation were used to analyze the occurrence of gaps in the middle and upper segment of the root canal and the apical 1/3 of the root canal after filling.Results:For the filling in the apical 1/3 of the root canal, no obvious gap appeared in the 10 s group and the 20 s group, and there was no significant difference between the dye infection depth and the control group (all P>0.05). For the filling of the middle and upper segment of the root canal, the probability of porosity is higher when using iRoot SP combined with single-point filling. Conclusions:Short-term high temperature heating will not affect the sealing effect of iRoot SP on the apical 1/3 of the root canal. For the middle and upper segment of the root canal, the filling effect of iRoot SP single-point filling combined with thermal gel gutta-percha vertical obturation method is better than that of iRoot SP single-point filling.
RESUMEN
Objective:To prepare nanosilver-hybridized polylactic acid-glycolic acid copolymer (PLGA) microspheres loaded with simvastatin (SIM), and to evaluate its sustained release effect in vitro. Methods:The emulsification-solvent evaporation method was used to prepare SIM-loaded PLGA microspheres. Silk fibroin (SF) was used to modify the surface of SIM-loaded PLGA microspheres by hydrophobic interaction. Then, the microspheres were continually modified by electrostatic adsorption to chitosan (CTS) and nano-silver (AgNPs) to prepare SF-AgNPs-CTS-SF-SIM-PLGA microspheres. Scanning electron microscope, Fourier transform infrared spectrometer, energy spectrometer, Zeta potential meter were used to analyze the SIM-loaded microspheres. The external release properties of the SIM-loaded microspheres were also investigated.Results:The average diameter of the prepared PLGA microspheres was about 9.67 μm. The results of Fourier transform infrared spectroscopy and energy spectroscopy showed that the AgNPs-CTS-SF-SIM-PLGA microspheres have been successfully constructed. The Zeta potential results indicated that the SIM-loaded microspheres were all in a stable state. The in vitro release results showed that the SF-AgNPs-CTS-SF-SIM-PLGA microspheres had a good in vitro release effect, could delay the drug release rate and prolong the drug release time. Conclusions:The SF-AgNPs-CTS-SF-SIM-PLGA microspheres have antibacterial and osteogenic effects, and exhibit a good in vitro release effect. They can be used for local sustained-release administration in the oral cavity, which make makes them potentially useful in the treatment of periodontitis.
RESUMEN
Objective@#To investigate the effects of two nanotopographies of ultraviolet (UV)-treated titanium surface on macrophage biological behaviour and inflammatory cytokines secretion, and to provide basis for clinical application of UV-treatment in dental implant modification.@*Methods@#Titanium disks were allocated into two groups. Samples in one group were acid-etched in hydrofluoric acid (Acid Ti group), and those in the other group were acid-etched and anodized (Anodization group) to form two nanotopographies respectively. The surface morphology was evaluated by field-emission scanning electron microscopy (FE-SEM). The samples were stored in the dark for 8 weeks. Thirteen samples from each group were exposed to UV-irradiation for 48 h (Acid Ti+UV group and Anodization+UV group), UV-untreated samples from Acid Ti and Anodization groups served as control. Hydrophilicity of samples was measured using contact angle measuring device. After 4, 24 and 72 h of incubation, macrophage cell adhesion and proliferation were conducted using cell counting kit-8. Cytokine/chemokine secretions [tumor necrosis factor-α (TNF-α), monocyte chemotactic protein-1 (MCP-1) and macrophage inflammatory protein-1α (MIP-1α)] were measured from cell culture supernatants at 24 and 72 h using magnetic luminex assay. Cell morphology was examined using FE-SEM after 2 h of incubation.@*Results@#Micropitted/nanopillar and micropitted/nanotubular topographies were observed in Acid Ti group and Anodization group respectively. Contact angles in Acid Ti+UV and Anodization+UV groups (20.2°±2.8° and 0.0°±0.0°) were significantly smaller than those in the Acid Ti and Anodization groups (P<0.05). Cell adhesion and proliferation in all groups at 4 and 24 h showed no difference (P>0.05). Cell proliferation in Acid Ti+UV and Anodization+UV groups at 72 h were (0.92±0.13) and (1.10±0.08) respectively, which were significantly higher than those in Acid Ti and Anodization groups. TNF-α concentration in Acid Ti+UV and Anodization+UV groups at 72 h were (1.03±0.11) and (0.87±0.10) ng/L, MCP-1 were (301.7±50.3) and (240.8±18.7) ng/L, MIP-1α were (224.9±30.6) and (233.9±14.9) ng/L respectively, which were significantly lower than those in Acid Ti and Anodization groups (P<0.05).@*Conclusions@#UV treatment can increase hydrophilicity of two titanium surface topographies, especially of Anodization+UV group. UV-treated titanium surfaces can promote macrophage proliferation and reduce the inflammatory response in vitro.
RESUMEN
Pulpal and periapical diseases are the common diseases in human diseases. The traditional treatment method for these diseases is root canal treatment, which is to completely remove and control infection, repair or prevent periapical lesions by root canal mechanical preparation, chemical disinfection and filling. At present, although root canal treatments have a high success rate, there are still a series of problems. Dental pulp regeneration has attracted more and more attention from researchers in promoting the formation of pulp-like tissue in root canals. The ultimate goal of regenerative endodontics is to form a functional endodontic-dentin complex with inner blood vessels and nerves, outer layers of dentin cells arranged along the root canal wall, and new dentin formed by secreting matrix, so as to restore pulp vitality. Stem cells, scaffolds, biosignal molecules, and regenerative microenvironment are key tissue engineering factors that affect pulp regeneration. In this paper, the strategies and applications of pulp regeneration were reviewed around the above factors and clinical procedures.
RESUMEN
Objective To observe the osteogenic differentiation of human periodontal ligament stem cells (hPDLSCs) and to investigate the epigenetic regulation of EZH2 inhibitor DZNeP on osteogenic differentiation of hPDLSCs. Methods The hPDLSCs were isolated and cultured, and their proliferation under different concentrations of DZNeP (0, 1, 2, 5 and 10 μmol/L) was detected by MTT. The effects of DZNeP on osteogenic differentiation of hPDLSCs were observed by alkaline phosphatase (ALP) staining and alizarin red staining. The effect of DZNeP on the trimethylation of histone H3K27 in hPDLSCs was detected by immunofluorescence staining. Results Compared with the control group, the proliferation of hPDLSCs after 1, 2, 5 and 10 μmol/L DZNeP treatment for 48 h was significantly decreased, respectively (all P<0.05), and it was concentration-dependent. The result of ALP staining and alizarin red staining showed that DZNeP could promote the expression of early osteogenic markers ALP and the formation of advanced calcified nodules of hPDLSCs. The immunofluorescence staining result showed that the trimethylation fluorescence intensity of histone H3K27 was significantly decreased in the DZNeP group compared with the control group. Conclusions As an EZH2 inhibitor, DZNeP can inhibit the proliferation of hPDLSCs and promote the differentiation of hPDLSCs into osteoblasts in vitro, suggesting that DZNeP can be used as a potential small molecule drug for the treatment of periodontitis.
RESUMEN
Objective To assess the efficacy of internal fixation assisted with Halo-vest in the treatment of Anderson-D'Alonzo type Ⅱ and superficial type Ⅲ odontoid fractures.Methods A retrospective case series study was made on 15 patients clinically diagnosed as Anderson-D'Alonzo type Ⅱ and type Ⅲ odontoid fractures with a fracture gap over 2 mm,displacement over 5 mm and broken end angel over 11° from January 2007 to January 2015.There were nine males and six females,aged 27-61 years [(44.5 ± 10.9)years].The patients were treated in "three phases" with the assistance of Halo-vest external fixation system and a novel guide pin aiming device.The three phases were as follows:phase Ⅰ:cervical traction reduction and halo-vest external fixation;phase Ⅱ:Halo-vest assisted internal fixation using the novel aiming device;phase Ⅲ:the Halo-vest fixation removal and cervical collar fixation.Operation duration,intraoperative bleeding,and postoperative visual analogue scale (VAS) pain score one month after the operation were recorded.The cervical lateral and open mouth X-ray or atlantoaxial CT scan with sagittal and coronal two-dimensional reconstruction were regularly reviewed,and the location of screws,reduction and fracture healing were evaluated.Results Operation duration ranged from 54 to 96 minutes [(71.3-± 11.9) min].The intraoperative blood loss was 5-60 ml [(32.6 ± 16.8) ml].There was no spinal cord or nerve root injury,cerebrospinal fluid leakage,wound infection or other complications.All patients were followed up for 12-36 months (mean,28 months).Fourteen patients were seen bony union 6 months after the surgery and one patient was seen a false joint.At the last follow-up,the patient with false joint was seen bone sclerosis,and other patients with sound bone healing.The preoperative VAS and that of one month after the operation was (7.3 ± 0.6) points and (1.6 ± 0.7) points,respectively (P ＜ 0.05).Conclusion For Anderson-D'Alonzo type Ⅱ and type Ⅲ odontoid fractures,which have a fracture gap greater than 2 mm,displacement more than 5 mm,broken end angle above 11 degrees,the three-phase Halo-vest assisted internal fixation can provide good stability before operation and promote bone healing and pain relief after operation.
RESUMEN
BACKGROUND:There is a very close relationship between osteoporosis and periodontal disease in postmenopausal women, but the mechanism remains unclear. OBJECTIVE:To investigate the expression of nuclear factor-κB in the alveolar bone andinterleukin-17 in the serum and gingiva in the mouse model of osteoporosis caused by ovariectomy. METHODS:Female mice aged 3 months were randomly divided into ovariectomy and sham operation groups. At 6 months after surgery, the mouse models were evaluated histologically on the submandibular bone and thigh bone stained with hematoxylin and eosin. In the submandibular bone, the expression levels of OCN and Runx2 were detected by RT-PCR, and the expression level of nuclear factor-κB was detected by immunohistochemical staining and western blot assay. Besides, the expression level of interleukin-17 in the serum and gingival homogenate was evaluated using Cytometric Beads Array. RESULTS AND CONCLUSION:The thigh bone in the ovariectomy group revealed the thin cortical bone, enlarged marrow cavity, and increased resorption lacunae, as well as fewer, thinner trabeculae with lower density and irregular structure. Compared with the sham operation group, the expression levels of OCN and Runx2 in the alveolar bone were decreased in the ovariectomy group. The activation of nuclear factor-κB (P65)appeared with P65 positive expression in the submandibular bone in the ovariectomy group, and the relative expression level was higher than that in the sham operation group. The serum level of interleukin-17 in the ovariectomy group was higher than that in the sham operation group, but the level in the gingival tissue showed no significant difference between the two groups. These results indicate that estrogen deficiency after ovariectomy can activate nuclear factor-κB signal pathway to play a role in periodontal osteolysis. However interleukin-17 in the local periodontal tissue may not be a key cytokine to damage the periodontal tissue.
RESUMEN
Objective: To optimize the inclusion process of volatile oil in Xiao' er Jiegan particle.Methods: β-Cyclodextrin was used as the inclusion material.Orthogonal experiments were performed,and the yield of volatile oil inclusion complex and the inclusion rate of volatile oil were taken as the indices to study the influence of inclusion temperature, inclusion time and the ratio of β-cyclodextrin to volatile oil (g∶ml) on the inclusion process.The β-CD-volatile oil inclusion complex was added to Xiao' er Jiegan particle and the stability studies were conducted as well.Results: The optimum volatile oils inclusion process of Xiao'er Jiegan particle was as follows: the inclusion temperature was 40℃, the inclusion time was 3 h , and the ratio of β-cyclodextrin to volatile oil (g∶ml) was 8∶1.The loss of volatile oil prepared by direct injection method was 51.27% after 6-month storage at room temperature, while that prepared by the inclusion method was only 3.13% after 24-month storage at room temperature.Conclusion: The optimized inclusion process of volatile oil is reasonable and feasible, and the stability of the prepared particle is also promising.
RESUMEN
Objective To evaluate the clinical efficacy of a self-designed novel n-shaped aiming device in aiding the percutaneous cannulated screwing for treatment of odontoid fractures of Anderson-D' Alonzo type Ⅱ and shallow type Ⅲ.Methods A retrospective analysis was conducted of the 17 patients who had been treated at our department for odontoid fracture of Anderson-D' Alonzo type Ⅱ and shallow type Ⅲ between January 2009 and December 2013.They were 13 males and 4 females,with an average age of 37.5 years (from 16 to 61 years).All received surgical treatment after skull traction or jaw pillow traction preoperatively for reduction.Intraoperatively,percutaneous cannulated screwing via the anterior cervical approach was performed with the help of a self-designed novel n-shaped aiming device to fix the odontoid.Postoperatively,X-ray and CT scan were used to check the screw locations and evaluate the fracture healing.Results The 17 cases were followed up for 6 to 15 months (average,10.5 months).No intraoperative injury to the esophagus,artery,spinal cord or nerve root happened.The operating time ranged from 60 to 125 min.The bleeding was from 10 to 40 mL.Intraoperative observation revealed fine locations of the screws.Bony union was achieved in 16 cases 3 months postoperatively while separation and hardening of the fracture ends was found in one ease.Conclusion Our self-designed novel n-shaped aiming device can facilitate the percutaneous cannulated screwing for treatment of odontoid fractures of Anderson-D'Alonzo type Ⅱ and shallow type Ⅲ,given that it has advantages of simple manipulation,accurate insertion,minimal invasion,quick recovery and reliable efficacy.
RESUMEN
Objeetive To assess the study outcomes in a consecutive series of patients with thoracic disc herniation (TDH) who undergone posterior spinal canal decompression and discectomy with segmental instrumentation and fusion.Methods Between January 2005 and June 2012,the data of 17 patients (11 males and 6 females) was retrospectively reviewed and analyzed.Disc herniation was classified as central in 10 cases and paracentral in 7 cases.The average canal encroachment was 71.7％±9.6％ (range,52％ to 90％).Their mean age at surgery was 55.7 years (range,21 to 81 years).All patients underwent a transfacet decompression and segmental instrumentation with interbody fusion.The data of patients included clinical presentation,blood loss,operative time,complications,visual analogue scale (VAS),Japanese Orthopaedic Association (JOA) score,and Frankel grading system.Results The average follow-up period was 37±12 months.The average surgical time was 120±63 min.The mean blood loss was 471±198 ml.Mean preoperative VAS score was 8.01±0.21,which improved to a mean of 1.12±0.07 at final follow-up.Average pre-and post-operative at 12 months JOA scores were 3.17±0.83 and 8.78±0.94 points,respectively.The average recovery rate was 65.1％±23.4％.Overall JOA scores showed a significant postoperative improvement.All patients reported 1 or 2 grade improvement in Frankel grading compared with preoperative status except for 1 patient whose grade had not changed.There were three complications,including one patient developing postoperative wound infection,one experiencing a cerebrospinal fluid leakage,one developing further neurological deterioration.Conclusion The results suggested that the posterior approach using special shaped osteotomy is feasible for central calcified TDH.No major complications occurred for achieving adequate decompression for central calcified TDH.
RESUMEN
BACKGROUND:Runx2 is considered to the main regulatory factor of osteogenic gene expression and be necessary for osteoblast differentiation, it plays an extremely important role in the osteoblast development, differentiation, regulation, bone calcification formation and bone repair. OBJECTIVE:To observe the biological properties of mesenchymal stem cells from human exfoliated deciduous teeth, explore the osteogenic differentiation potential of deciduous teeth stem cells, and observe the dynamic expression of Runx2 gene at varying time points. METHODS:The stem cells from human exfoliated deciduous teeth were isolated and cultured in vitro. The cellsurface antigen was detected with flow cytometry. The third passage cells were cultured in the adipogenic medium for 4 weeks, and oil red O staining was conducted to test lipid droplets formation. The third passage cells were cultured in the osteogenic medium for 21 days, and mineralized nodules were detected by alizarin red staining. Runx2 mRNA dynamic expression was detected with semi-quantitative RT-PCR at different time points. RESULTS AND CONCLUSION:The stem cells from human exfoliated deciduous teeth were obtained by enzyme digestion and limited dilution methods. Flow cytometry results showed that, CD146 and STRO-1 were expressed to varying degrees. Oil red O staining revealed salmon pink positive particles. Alizarin red staining showed positive expression. RT-PCR results showed that, Runx2 expression was found at day 0, up-regulated from day 0 to day 6, and subsequently dropped with an expression bottom at day 12, after that a second expression peak occurred at day 18, fol owed by a stably regulation. The stem cells from human exfoliated deciduous teeth can be isolated and cultured in vitro, express surface antigen of mesenchymal stem cells, and have the potentials of differentiating into adipocytes and ostetoblasts. Runx2 gene profiles are dynamical y expressed during osteoblastic differentiation. Runx2 express throughout every stage of osteoblastic differentiation. The expression is up-regulated during early and later stages, and down-regulated in metaphase.
RESUMEN
BACKGROUND:As the multipotent differentiation potential, bone marrow mesenchymal stem cells exert an important role in bone metabolism disorders, which is regulated by a variety of hormones and cytokines. Currently, the epigenetic regulatory mechanisms underlying osteogenic differentiation of bone marrow mesenchymal stem cells are unclear, and association between histone deacetylase (Hdac) and osteoporosis needs to be further explored. OBJECTIVE:To investigate the epigenetic mechanisms of bone formation by analyzing the expression of Hdac1, 3, 4 mRNA profile in bone marrow mesenchymal stem cells isolated from ovariectomized mice. METHODS:A total 30 female healthy Kunming mice were randomly divided into sham group and ovariectomy group. After 7 days of adaptive feeding, mice in the ovariectomized group (n=15) were subject to bilateral ovariectomy;mice in sham group (n=15) were sham-operated. RESULTS AND CONCLUSION:In the ovariectomy group, the trabecular bone of the femur was sparse or broken, the width of trabecular bone was narrowed, the trabecular separation was widened, and the trabecular bone volume was reduced. The level of Hdac3 mRNA was lower in bone marrow mesenchymal stem cells from ovariectomized mice compared with controls, but there was no significance between Hdac1, Hdac4 mRNA expression of the two groups. These findings demonstrate that Hdac might play an important role in bone remodeling in the model of estrogen deficiency-induced osteoporosis.
RESUMEN
Objective To explore surgical methods and their efficacy for post-traumatic Made-lung deformity complicated with dorsal or volar angulation in the adults. Methods Volar plate or exter-nal fixator, combined with the techniques osteotomy and bone grafting, were selected to treat adult pa-tients with post-traumatic Madelung deformity complicated with dorsal or volar angulation. The effects were preliminarily evaluated through comparing the volar tilting angle, ulnar inclination, radial shortening and the range of joint motion before and after the operation. Results All the patients were followed up for 6-27 months (mean 16 months). The volar tilting angle, radial inclination, radial shortening, range of joint motion of all patients were improved significantly (P<0.05). Conclusions For patients with Madelung deformity complicated with dorsal angulation, internal fixation of volar plate combined with volar osteotomy and bone grafting is recommended; while dynamic eternal fixator combined with combined with dorsal osteotomy and bone grafting is an ideal choice for patients with Madelung deformity complicated with volar angulation.
RESUMEN
<p><b>OBJECTIVES</b>To investigate the expression of macrophage migration inhibitory factor (MIF) mRNA in Schwann cells after peripheral nerve injury and roles of Schwann cells and MIF in macrophages activation and nerve regeneration.</p><p><b>METHODS</b>Fifty SD rats were divided into 10 groups. One group served as normal control. The rest were anesthetized with 3% sodium pentobarbital (30 - 60 mg/kg, i.p) and sciatic nerves were transected distal to the obturator tendon respectively 1 h, 12 h, 1 d, 3 d, 7 d, 10 d, 14 d, 17 d and 21 d before being killed. Sciatic nerves were resected and connective tissues excised. Schwann cells were obtained by digesting the nerve tissues with trypsin and collagenase. RNA was isolated and reverse-transcription-polymerase chain reaction (RT-PCR) was carried out. cDNA was analyzed by automatic system and the parameters were assessed to define the status of MIF mRNA expression in different groups.</p><p><b>RESULTS</b>The level of MIF mRNA started to increase 12 h after the nerve transection. The level remained high from day 7 up to 10 after the injury. During the period from days 10 to 21, MIF mRNA decreased slowly to the pre-transection level.</p><p><b>CONCLUSION</b>After peripheral nerve injury, Schwann cells can secrete MIF which may play a pivotal role as an immunomodulatory cytokine in macrophage activation and inflammatory reaction.</p>
Asunto(s)
Animales , Femenino , Masculino , Ratas , Factores Inhibidores de la Migración de Macrófagos , Genética , Traumatismos de los Nervios Periféricos , ARN Mensajero , Ratas Sprague-Dawley , Reacción en Cadena de la Polimerasa de Transcriptasa Inversa , Células de Schwann , MetabolismoRESUMEN
Objective To observe the anatomical features of muscular branches of radial nerve in the forearm. Methods Forty seven adult embalmed cadaver arms were dissected under 4? loupe magnification. The radial nerve was identified in the interval between the brachioradialis and brachialis at the upper arm 10 cm proximal to the lateral humeral epicondyle (LHE). The nerve and branches were dissected and observed. The number of branches entering the muscles was counted and the following measurements were performed along the radial nerve and branches with a vernier caliper (accurate to 0.1 mm): distances from the origin point and muscle entry point of each branch to the LHE, the distance between the LHE and the styloid process of ulna (SPU). Data were pooled among all specimens (n=47) to calculate mean and standard deviation. Results In 35 of 47 (74.5%) specimens, the deep branch of the radial nerve coursed along the line between the LHE and the SPU. In all specimens, extensor indicis was the last muscle to be innervated. The average distance from the LHE to the origin point of extensor indicis branch was (160.6?12.1) mm, and that from the LHE to the SPU was (231.7?14.6) mm. The average proportionality between these two distances was 0.7?0.1. There was a large variation in branch number. The muscle with the highest branch number (4.6 averaged) was the extensor digitorum communis and that with the lowest number (1.1 averaged) were extensor policis longus and extensor indicis proprius. In 29 of 47 (61.7%), extensor carpi radialis brevis (ECRB) branch originated from the superficial branch of the radial nerve. In 15 of 47 (31.9%), the branch came from the deep branch of the radial nerve. In 3 of 47 (6.4%), the branch emanated from the radial nerve as 1 branch of a trifurcation (with the other branches being the deep branch and the superficial branch of the radial nerve). Conclusion With the forearm being pronated, the proximal 7/10 of the line between the LHE and the SPU can be considered as the projection on body surface of the deep branch of the radial nerve. The deep branch of the radial nerve may be damaged by operators improper dragging and detaching in surgery with the following reasons: branch lengths of extensor digitorum, extensor carpi ulnaris and extensor digiti minimi are short relatively, and origin points of these branches are more close than others to the point through which the deep branch of the radial nerve come out supinator. Differences in muscle architecture and function may be the reason that there is such variation in branch number. Discrepancies between studies about the ECRB branch origin may be related with the fault committed by researchers in dissecting.
RESUMEN
The trigemino-cerebellar projections of rats were studied by introducing HRP microelectrophoretically into various areas of the cerebellar cortex. The results indicate that the following parts of the cerebellum receive bilateral (mostly ipsilateral) trigeminal projections, namely, the simple lobule, the crusa Ⅰ and Ⅱ, the paramedian lobuIe, the dorsal paraflocculus, the lateral part of the lobule Ⅷ and the vermal cortex of the lobules Ⅵ～Ⅸ.Fibers from the interpolar subnucleus and the principal sensory nucleus of the trigeminal nerve project to all of the above mentioned areas.The caudal subnucleus projects to the crus Ⅰ, the paramedian lobule, the dorsal paraflocculus, the lateral part of the lobule Ⅷ and the vermal cortex of the lobules Ⅵ～Ⅸ.The oral subnucleus gives its projections to the crus Ⅱ, the paramedian lobule, the lateral part of the lobule Ⅷ and the vermal cortex of the lobules Ⅶ～Ⅸ.The mesencephalic nucleus of the trigeminal nerve sends fibers to the crura Ⅰ and Ⅱ, the paramedian lobule, the lateral part of the lobule Ⅷ and the vermal cortex of lobules Ⅶ～Ⅸ.A few labeled neurons were found in the motor nucleus of the trigeminal nerve; while in the region ventro-lateral to the motor nucleus, in the root of the trigeminal nerve and in areas adjacent to it large amount of labeled cells were seen in all the cases studied.Unexpectedly, several labeled neurons were seen in a semilunar ganglion of the trigeminal nerve.
RESUMEN
Eight rabbits were used in this study.The position of the phrenic nucleus in thespinal cord,the morphology of the phrenic motoneurones and position of the cellbodies of the sensory neurons of the phrenic nerve were determined by using themethod of HRP labelling through the centralcutting end of the left phrenic nerve atthe root of the neck.The results were as follows:1.The phrenic nucleus in the rabbit was located in C_3,C_4,and C_5 segments.Itis a longitudinal cell column lying between the ventromedial and the ventrolateralcolumns of the ventral horn of the spinal cord.2.Phrenic motoneurones differed in shape and size.Most of the cell bodies ofthe rabbit's phrenic motoneurones were round or oval in shape,ranging from 5 to45 ?m(mean 25 ?m)in diameter.3.The rabbit phrenic nerve arises from the ventral rami of the 3 rd,4 th and5 th cervical nerves,and the nucleus of this nerve does not extend beyond the 3 rd-5 th segments——the location of the nucleus corresponds with the segmental rootsfrom which the phrenic nerve arises.4.The cell bodies of the sensory neurones of the rabbit's phrenic nerve werelocated in the dorsal root ganglia of the third and fourth cervical nerves.Besides,50 rabbits were dissected,and the origin of their phrenic nerves werestudied.
RESUMEN
The trigemino-cerebellar projections of the rats were studied by introducing HRP microelectrophoretically in to various deep icerebellar nuclei (dentate nucleus, ND; interpositus nucleus, anterior part, NIA; interpositus nucleus, posterior part, NIP; fastigial nucleus, NF). The results indicate that all nuclei of the trigeminal nerve give their projections to bilateral (mostly ipsilateral) deep cerebellar nuclei. Most of them come from the interpolar and oral subnuclei of the spinal nucleus of the trigeminal nerve. The caudal subnucleus of the spinal nucleus of the trigeminal nerve and the principal sensory nucleus of the trigeminal nerve (VP) take the second place. Least of all come from the mesencephalic nucleus (ME) and the motor nucleus (MO) of the trigeminal nerve. In addition, cells in the region ventrolateral to the motor nucleus (VMO) and in the root of the trigeminal nerve (VR) also project to deep cerebellar nuclei. Fibers coming from ME terminate mostly in NF and NIA. Fibers from the spinal nucleus of the trigeminal nerve and VP terminate more in NIP and ND. Fibers from MO terminate in NF, NIA and ND. Fibers from VMO and VR have the same termination as those from the sensory nuclear complex of the trigeminal nerve.