Effect of dental distance from implant and MAR algorithm on the detection of vertical root fracture in CBCT images

Three-dimensional cone-beam computed tomography (CBCT) has an important role in the detection of vertical root fractures (VRFs). The effect of artifact generation by high-density objects like dental implants on image quality was well documented. This study aimed to assess the effect of tooth-implant distance and the application of metal artifact reduction (MAR) algorithm on the detection of VRFs on CBCT scans. This study was conducted on 20 endodontically treated single-rooted teeth. VRFs were induced in 10 teeth, while the other 10 remained intact. The implant was inserted in the right second premolar socket area, and two teeth were inserted in right canine and right first premolar sockets area randomly and underwent CBCT with and without the application of MAR algorithm. SPSS 21 was used to analyze the results (alpha=0.05). According to the findings of this study, all four variables of sensitivity, specificity, accuracy, and positive predictive values in diagnosis were higher in cases without MAR software at both close(roots in first premolar sockets) and far distances (roots in canine sockets) from the implant. However, the highest rate of diagnosis accuracy of the first and second radiologists was in the far distance group from the implant without MAR, and the lowest rate of diagnosis accuracy in the first and second radiologists was in the close distance to the implant. Applying MAR algorithm had no positive effect on detection of VRFs on CBCT scans in both close and distant scenarios.

La tomografía computarizada de haz cónico tridimensional (CBCT) tiene un papel importante en la detección de fracturas radiculares verticales (VRF). El efecto de la generación de artefactos por objetos de alta densidad como los implantes dentales en la calidad de la imagen está bien documentado. Este estudio tuvo como objetivo evaluar el efecto de la distancia entre el diente y el implante y la aplicación del algoritmo de reducción de artefactos metálicos (MAR) en la detección de VRF en escaneos CBCT. Este estudio se realizó en 20 dientes uniradiculares tratados endodónticamente. Se indujeron VRF en 10 dientes, mientras que los otros 10 permanecieron intactos. El implante se insertó en el área del alveolo del segundo premolar derecho, y dos dientes se insertaron en el canino derecho y en el área del alvéolo del primer premolar derecho al azar y se sometieron a CBCT con y sin la aplicación del algoritmo MAR. Se utilizó SPSS 21 para analizar los resultados (alfa=0,05). De acuerdo con los hallazgos de este estudio, las cuatro variables de sensibilidad, especificidad, precisión y valores predictivos positivos en el diagnóstico fueron más altas en los casos sin el software MAR tanto en distancias cercanas (raíces en las cavidades de los primeros premolares) como lejanas (raíces en las cavidades de los caninos) del implante. Sin embargo, la tasa más alta de precisión diagnóstica del primer y segundo radiólogo fue en el grupo de mayor distancia al implante sin MAR, y la tasa más baja de precisión diagnóstica en el primer y segundo radiólogo fue en la distancia cercana al implante. La aplicación del algoritmo MAR no tuvo un efecto positivo en la detección de VRF en escaneos CBCT en escenarios cercanos y distantes.

Knowledge level of Iranian dental practitioners towards digital radiography and cone-beam computed tomography / Nível de conhecimento de dentistas Iranianos sobre Radiografia Digital e Tomografia Computadorizada de Feixe Cônico

Objective: TThis study aimed to assess the knowledge level of Iranian dental practitioners about digital radiography (DR) and cone-beam computed tomography (CBCT). Material and Methods: In this cross-sectional study, a researcher-designed questionnaire was administered among 180 general dentists and specialists. The questionnaire had three main domains of demographic information, fifteen questions about knowledge of DR (advantages, disadvantages, physical properties) and twenty six questions about knowledge of CBCT (indications, applications, advantages, route of knowledge acquisition). Data were analyzed using descriptive statistics, t-test and Pearson's correlation coefficient. Results: Of 180 participants, 76 (42.2%) were females. The minimum, maximum and mean± standard deviation scores obtained in DR were 4, 14, and 9.031 ± 1.85 and in CBCT were 0,26 and 18.56 ± 4.81, respectively. In the CBCT domain, the participants had maximum knowledge about "low radiation dose" (72.8%) and minimum knowledge about the "role of CBCT in determination of bone density" (45%). In DR domain, the participants had maximum knowledge about "no need for radiographic films" (75.6%) and minimum knowledge about "not requiring manual processing" (15.6%). Overall, participants had higher level of knowledge about CBCT than DR. An inverse correlation was noted between age and work experience with the number of correct answers. However, no significant difference was noted in the knowledge level of males and females regarding CBCT or DR (p = 0.233 and p = 0.227, respectively). Conclusions: further education seem imperative for dentists in this respect for more efficient diagnosis and treatment planning, minimize patient radiation dose and save time and cost. (AU)

Objetivos: Avaliar o nível de conhecimento de dentistas iranianos sobre radiografia digital (RD) e tomografia computadorizada de feixe cônico (TCFC). Materiais e métodos: Neste estudo transversal, um questionário, elaborado por pesquisadores, foi aplicado a 180 dentistas clínicos geral e especialistas. O questionário tinha três domínios principais de informação demográfica, quinze questões sobre conhecimento de RD (vantagens, desvantagens, propriedades físicas) e vinte e seis questões sobre conhecimento de CBCT (indicações, aplicações, vantagens, protocolo de aquisição). Os dados foram analisados por meio de estatística descritiva, teste t e coeficiente de correlação de Pearson. Resultados: Dos 180 participantes, 76 (42,2%) eram do sexo feminino. Os escores mínimo, máximo e média ± desvio padrão obtidos na RD foram 4, 14 e 9,031 ± 1,85 e na CBCT foram 0, 26 e 18,56 ± 4,81, respectivamente. No domínio CBCT, os participantes tinham conhecimento máximo sobre "baixa dose de radiação" (72,8%) e conhecimento mínimo sobre o "papel da CBCT na determinação da densidade óssea" (45%). No domínio RD, os participantes possuíam conhecimento máximo sobre "não há necessidade de filmes radiográficos" (75,6%) e conhecimento mínimo sobre "não requer processamento manual" (15,6%). No geral, os participantes tinham maior nível de conhecimento sobre CBCT do que RD. Foi observado correlação inversa entre idade e experiência de trabalho com o número de acertos. No entanto, nenhuma diferença significativa foi observada no nível de conhecimento de homens e mulheres sobre TCFC ou RD (p = 0,233 e p = 0,227 respectivamente). Conclusão: Parece imperativo para os dentistas iranianos, mais educação nesse aspecto para diagnóstico e planejamento de tratamento mais eficientes, minimizar a dose de radiação para paciente, economizar tempo e custos. (AU)

Sex determination by osteometric assessment of the mastoid process using Cone Beam Computed Tomography / Determinação do sexo em uma população Iraniana por avaliação osteométrica do processo mastóide em imagens de TCFC

Objective: Sex determination is one of the most important parameters to identify in forensic science. Because the mastoid process is the most resistant to damage due to its position in the skull base, it can be used for sex determination. The purpose of this study was to measure the dimensions and convexity and internal angles of the mastoid process to present a model of sex determination in Iranian population. Material and methods: This study was performed on three-dimensional images of 190 Cone Beam Computed Tomography (CBCT) of 105 women and 85 men. On each CBCT the distance between the porion and the mastoid (PM), mastoid length (ML), the distance between the mastoidale and the mastoid incision (M-I), the mastoid height (MH), the mastoid width (MW), intermastoidale distance (IMD) the lateral surfaces of the left and right mastoids (IMLSD) and the Mastoid medial convergence angle (MMCA) was measured on both the right and the left. The data were analyzed by descriptive statistics, t-test, and discriminant function analysis. Results: Significant differences were found for all variables except MMCA and MF in both sex. All measured variables except MW were greater for men than women. The discriminant model achieved a total accuracy of 93.7%. Among the measured factors IMD and IMSLD had the most influence on sex determination. Conclusion: Measuring the dimensions of the mastoid process is a very good method for sex determination with high accuracy of 90% (AU)

Objetivo: A determinação do sexo é um dos parâmetros mais importantes para identificação na ciência forense. Por ser o processo mastóide resistente a danos, devido a sua posição na base do crânio, este poderia ser usado na determinação do sexo. O objetivo deste estudo foi mensurar as dimensões, convexidade e ângulos internos do processo mastóide para apresentar um modelo de determinação do sexo em uma população Iraniana. Material e métodos: Este estudo foi realizado em 190 imagens de tomografia computadorizada de feixe cônico (TCFC), sendo 105 mulheres e 85 homens. Em cada TCFC foram realizadas medidas no processo mastóide em comprimento (ML), altura (MH), largura (MW) em ambos os lados direito e esquerdo, também foi medida a distância entre o Pórion e o processo mastóide (PM), distância até incisura mastoidea (M-I), distância entre as superfícies mediais (IMD) distância entre as superfícies laterais dos processos direito e esquerdo (IMLSD) e o ângulo de convergência medial (MMCA). Os dados foram analisados por estatística descritiva, teste t e análise de função discriminante. Resultados: Diferenças significativas foram encontradas para todas as variáveis, exceto MMCA e MF em ambos os sexos. Todas as variáveis medidas, exceto MW, foram maiores para os homens do que para as mulheres. O modelo de análise de função discriminante alcançou uma precisão total de 93,7%. Entre os fatores medidos, o IMD e o IMSLD tiveram a maior influência na determinação do sexo. Conclusão: Podemos concluir que as dimensões do processo mastóide constituem um método para determinação do sexo, em população Iraniana, com precisão de 90% (AU)

Effect of proteolytic agents on microleakage of etch and rinse adhesive systems

Objective: this study aimed to assess the effect of treatment of phosphoric acid etched dentin surface with 5% bromelain enzyme and Nd:YAG laser prior to the use of etch and rinse adhesive systems on microleakage margins of class V composite restorations. Materials and Methods: sixty sound premolar teeth were selected. Standard class V cavities were prepared in the buccal and lingual surfaces of each teeth. Preparation in that way 1 mm of the cavity was above and 1 mm of it was below the cementoenamel junction. The teeth were then randomly divided into three groups including 20 teeth(40cavities in each gorup). Two ethanol base etch and rinse system (Adper Single Bond and OptiBond Solo) was applied in each group. In the control group, cavities were etched with 37% phosphoric acid. Adper Single Bond was applied to 20 and OptiBond Solo was applied to the remaining 20 cavities and they were restored with Z250 composite (n=40). The same procedures were performed in bromelain and Nd:YAG laser groups with the difference that prior to the application of adhesive, aqueous 5% bromelain was applied in bromelain group while Nd:YAG laser was irradiated in laser group. All teeth were thermocycled and their apices were sealed with sticky wax. The tooth surfaces were coated with nail varnish except for 1 mm around the restoration margins, and the teeth were then immersed in fuchsine and sectioned by a diamond disc into mesial and distal halves. Marginal microleakage at both sides was determined and scored under a stereomicroscope at x40 magnification. Then data were analyzed using the Kruskal Wallis and Mann Whitney tests (α=0.05). Results: according the result of Mann Whitney test, Cervical margins showed significantly higher microleakage than the occlusal margins (P=0.000) but no significant difference was noted in microleakage of occlusal (P=0.362) or gingival (P=0.147) margins among the three groups by Kruskal Wallis test. Conclusion: in conclusion, application of proteolytic agents(5% bromelain solution and Nd:YAG laser) on acid-etched dentin surface prior to the application of adhesive has no significant effect on marginal microleakage of class V composite restorations (AU)

Effect of CPP-ACP paste with and without CO2 laser irradiation on demineralized enamel microhardness and bracket shear bond strength

ABSTRACT Introduction: Many patients seeking orthodontic treatment already have incipient enamel lesions and should be placed under preventive treatments. The aim of this in vitro study was to evaluate the effect of CPP-ACP paste and CO2 laser irradiation on demineralized enamel microhardness and shear bond strength of orthodontic brackets. Methods: Eighty caries-free human premolars were subjected to a demineralization challenge using Streptococcus mutans. After demineralization, the samples were randomly divided into five equal experimental groups: Group 1 (control), the brackets were bonded without any surface treatment; Group 2, the enamel surfaces were treated with CPP-ACP paste for 4 minutes before bonding; Group 3, the teeth were irradiated with CO2 laser beams at a wavelength of 10.6 µm for 20 seconds. The samples in Groups 4 and 5 were treated with CO2 laser either before or through CPP-ACP application. SEM photomicrographs of a tooth from each group were taken to observe the enamel surface. The brackets were bonded to the buccal enamel using a conventional method. Shear bond strength of brackets and ARI scores were measured. Vickers microhardness was measured on the non-bonded enamel surface. Data were analyzed with ANOVA and Tukey test at the p< 0.05 level. Results: The mean shear bond strength and microhardness of the laser group were higher than those in the control group and this difference was statistically significant (p< 0.05). All groups showed a higher percentage of ARI score 4. Conclusion: CO2 laser at a wavelength of 10.6 µm significantly increased demineralized enamel microhardness and enhanced bonding to demineralized enamel.

RESUMO Introdução: muitos pacientes, ao buscar o tratamento ortodôntico, já apresentam lesões incipientes no esmalte e precisam ser submetidos a tratamentos preventivos. O objetivo do presente estudo in vitro foi avaliar o efeito da pasta CPP-ACP e da irradiação com laser de CO2 na microdureza do esmalte desmineralizado e na resistência ao cisalhamento de braquetes ortodônticos. Métodos: oitenta pré-molares humanos hígidos foram submetidos a desmineralização usando Streptococcus mutans. Após a desmineralização, as amostras foram divididas aleatoriamente em cinco grupos experimentais: Grupo 1 (controle), os braquetes foram colados sem qualquer tratamento de superfície; Grupo 2, a superfície do esmalte foi tratada com pasta CPP-ACP por 4 minutos antes da colagem; Grupo 3, os dentes foram irradiados com laser de CO2 no comprimento de onda de 10,6 µm, por 20 segundos; Grupos 4 e 5, as amostras foram tratadas com laser de CO2 antes ou durante a aplicação de CPP-ACP. Foram feitas fotomicrografias por Microscopia Eletrônica de Varredura (MEV) de um dente de cada grupo, para avaliação da superfície do esmalte. Os braquetes foram colados ao esmalte na face vestibular, usando-se o método convencional. Foram medidos a resistência ao cisalhamento dos braquetes e o escore do Índice de Adesivo Remanescente (ARI). A microdureza Vickers foi medida nas superfícies do esmalte onde não foi realizada colagem. Os dados foram analisados com ANOVA e teste Tukey ao nível de p< 0,05. Resultados: a média da força de resistência ao cisalhamento e da microdureza do grupo laser foi superior à do grupo controle, com diferença estatisticamente significativa (p < 0,05). Todos os grupos apresentaram maior porcentagem do escore ARI=4. Conclusões: o laser de CO2 no comprimento de onda de 10,6 µm aumentou significativamente a microdureza do esmalte desmineralizado e melhorou a adesão dos braquetes nele.