RESUMEN
The uptake of innovative technical solutions and water services delivery models to address climate change uncertainties has been hampered by the fragmented nature of policies and the absence of an environment that recognises and then addresses the inherent complexity of the diverse stakeholder base involved in the provision and consumption of water services. Understanding the wider context and end user acceptability of innovations has the potential to improve the uptake and subsequent impact of solutions to the pressure facing the provision of water services, particularly when set against the backdrop of climate change. This special issue focuses on the wider aspects which may contribute towards the delivery of sustainable water management and covers a range of topics including: user attitudes and perceptions to water demand management measures; approaches to understanding and influencing water end users, water-energy linkages and the interactions between community and water service delivery modes. We hope readers will find the collection of presented papers informative, with them in turn contributing towards the development of new areas of research that lead to the development of relevant and impactful solutions. We would like to thank all contributing authors for their hard work and patience in the production of this special issue.
RESUMEN
Aims: To establish the system characteristics of a novel rainwater harvesting system. Study Design: A laboratory test rig was used to assess the selected technology. Place and Duration of Study: University of Exeter, Centre for Water Systems between June 2014 and May 2015. Methodology: Previous research has identified that systems should have: 1) reduced capital costs, 2) reduced operational costs and 3) increased ease of retrofitting. To investigate the system’s ability to address these requirements, two full-scale laboratory test rigs have been used to assess flow and power consumption characteristics under a range of installation scenarios. Results: The system was identified to have a mean power consumption of 0.12kWh/m3 during a one hour pump test. Electrical costs were found to increase when the power consumption of the 11W control board was taken into account. Conclusion: Subject to reduction of the standby power consumption of the controller, the novel RWH system assessed in this study has potential to provide non-potable water supplies to households in the UK at a lower power consumption rate than existing water supply systems identified in the literature.
RESUMEN
Aim: To explore the relation between water consumption and water use behaviour and attitudes, and devices applied in households in urban areas in India. Methodology and Study Site: This paper presents the results of a domestic water consumption survey carried out in Jaipur, India. A questionnaire containing over 60 questions was developed to collect information on households’ characteristics (e.g. family size, household type, and number of children), indoor and outdoor water use activities and their respective frequencies and durations. Information was also gathered on the volume of water used in each of these activities. Over 90 households of different types (standalone houses and apartments in a university campus and Jaipur city) participated in the survey. The survey results were analysed using cluster analysis and one-way analysis of variance (ANOVA). Results: The results show that the per capita consumption varies considerably with household type and size. The average water consumption was 183 and 215 litres/person/day for standalone households and apartments, respectively. Water used in bathing and WC's represent the highest proportion of water consumption in both stand-alone houses and apartments. Over 40% of the households reported no use of showers. The per capita water consumption is inversely related to family size especially in stand-alone houses. Conclusion: The information pertaining to water use habits and the qualitative and quantitative analysis can be used as an input to a proposed domestic water efficiency tool (DoWET) which can generate optimal water efficient composite strategies keeping in view a range of sustainability indicators including water saving potential, cost and associated energy consumption of the water saving devices and fixtures available in India.
RESUMEN
A changing and more variable climate coupled with urbanization, population growth and shifting living standards has led towards increased frequency of extreme events (droughts and floods). Using water wisely in the built environment has the potential to enhance the resilience of urban water infrastructure to the extreme events. This special issue consists of eight papers mainly focused on aspects of water management in the built environment (i.e. residential buildings). Topics covered, include: domestic water consumption trends, hot and cold water delivery systems, effectiveness of water efficiency measures in buildings, the role of rainwater harvesting, greywater recycling, and the impact of front gardens on attenuating flows and water quality. Sustainable water management in the built environment is the subject of renewed attention in many parts of the world, with public policy and the work of planners rapidly evolving and focusing on the implementation of decentralized and locally based solutions. We hope readers will find the collection of presented papers informative, with them in turn contributing towards the development of new areas of research that lead to the development of relevant and impactful solutions. We would like to thank all contributing authors for their hard work and patience in the production of this special issue.
RESUMEN
Aim: This study was aimed to evaluate the effect of steam sterilization on the accuracy (within 10%) of friction‑style mechanical torque limiting devices (F‑S MTLDs) to achieve their target torque values. Materials and Methods: Fifteen new F‑S MTLDs were selected from Astra Tech (25 Ncm, Hader SA, La Chaux‑de‑Fonds, Switzerland), BioHorizons (30 Ncm, Dynatorq ITL, Irvine, California, USA), Dr. Idhe (15‑60 Ncm, Dr. Idhe Dental, Eching/Munich, Germany). Every peak torque measurement was tested ten times before steam sterilization using Tohnichi torque gauge (6Tohnichi‑BTG (‑S), Japan). Steam sterilization was performed using a 100 cycle autoclave. Preparation steps were carried out for the devices before each autoclave sterilization cycle. Peak torque measurements were repeated after every sterilization cycle. Mean difference between the measured and the targeted torque values were evaluated before and after aging. Repeated‑measures of ANOVA were used to compare the differences of accuracy between subjects. Bonferroni post‑hoc test was used for pairwise comparison. Results: Autoclaving resulted in an increase in the error values (the difference between peak torque and target torque values) in all the three groups studied (P < 0.05), with only Astra Tech devices showing >10% (maximum 12%) difference from their torque values in 5% of the measurements. Conclusion: Steam sterilization effect differs between target torque and measured peak values with an increase trend. The peak torque values showed a significant decrease for BioHorizons, while a significant increase was noted for Astra Tech and no significant change in Dr. Idhe group after sterilization. Clinical Implication: Within the limitation of this study the torque output of each individual device deviated in varying degrees from target torque values. However, the majority of the new frictional‑style devices tested in this study, delivered fairly consistent torque output within 10% of their preset target values after sterilization. Astra Tech devices were the only one showing more than 10% difference from their torque values in 5% of the measurements. Combined effects of sterilization and aging still needs to be determined.