Changes in mechanical properties of seven light-cured composite resins after thermal cycling / 南方医科大学学报

<p><b>OBJECTIVE</b>To examine the changes of the mechanical properties of 7 different light-cured composite resins after thermal cycling and the correlations between these properties.</p><p><b>METHODS</b>Seven different light-cured composite resins, including 2 microfilled composites (A110:AH and ESTELITE :ET), 3 microhybrid composites (AELITE:AT, Z250:ZS, and CharmFil plus:CP), and 2 nanohybrid composites (Z350:ZH and Grandio:GD), were prepared into test specimens with a diameter of 12 mm and a thickness of 1.0 mm. The specimens were stored in distilled water at 37 degrees celsius; for 24 h prior to 1 000 thermal cycles of 5 degrees celsius; for 15 s and 55 degrees celsius; for 15 s. The biaxial flexural strength (δ(f)) was tested using the ball-on-three-ball method at a crosshead speed of 0.5 mm/min (ISO4049). The fracture surface was observed under scanning electron microscope (SEM), and the remaining specimens underwent Knoop hardness test with a 50-g loading for 10 s.</p><p><b>RESULTS</b>The highest and lowest Weibull modulus was observed in AH (18.752) and AT (5.290) group, respectively. The highest and lowest biaxial flexural strength was observed in ZS (158.2 MPa) and ET (54.0 MPa) groups, respectively. The δ(f) of the tested materials decreased in the order of microhybrid composite, nanohybrid composite, and microfiller composite, and the δ(f) showed no significant difference between the composites with a similar filler (P>0.05). The fracture number was positively correlated to the strength of the material. The Knoop hardness numbers (H) was the highest in GD group (110.81∓14.77 kg/mm(2)) and the lowest in AH group (42.81∓1.91 kg/mm(2)). SEM showed that the interface region of the matrix and the filler was vulnerable to crack formation.</p><p><b>CONCLUSION</b>The nanohybrid composite resins better suit clinical applications than microhybrid composites. The applicability of Knoop hardness test in hardness measurement of the composite resins needs to be further demonstrated.</p>

Evaluation of characteristics on titanium surface treatment for absorption of functional groups / 中华医学杂志(英文版)

<p><b>BACKGROUND</b>In order to bind or fix bioactive materials directly to the surface of a Ti implant, the prior binding process of functional groups (FGs, -COOH and -OH) to the implant surface is necessary. Conventional binding processes are so high-cost and complex, so it is essential to find a simple and effective procedure for Ti-FG binding.</p><p><b>METHODS</b>Various electrolyte compositions and electrochemical processing were adopted in this study to develop a relatively simple and effective Ti-FG binding process. The ability of Ti-FG binding and calcium (Ca)/phosphorous (P) absorption and corrosion resistance were evaluated according to various titanium surface treatment in electrolyte involving -COOH and -OH ion by using X ray photoelectron spectroscopy (XPS), field emission scanning electron microscope (FE-SEM) and potentiodynamic scan method respectively.</p><p><b>RESULTS</b>In cases of -COOH, the anodic oxidation process (AN) showed an effective binding ability between -COOH and Ti surface. On the other hand, in cases of -OH, there were no significant differences in the result between the conditions used. In regard to the absorption of Ca and P on Ti surface, there was a minimal amount of Ca absorbed but no P was absorbed. The anodic oxidation series showed homogenous corrosion, whereas the electrolyte immersion (EL) series showed unstable corrosion. Although EL-OH showed a novel corrosion potential, the EL-COOH series showed good corrosion resistance over the anodic potential range.</p><p><b>CONCLUSIONS</b>The ability of binding between FG and the Ti surface and Ca/P absorption were strongly associated with the surface potential (ζ potential), which was dependent on the pH of the electrolyte. Accordingly, in order to achieve the effective absorption of various FGs on the Ti surface, it is needed to develop the combination process in addition to the electric affinity, relation with the ζ potential.</p>

Do Microencapsulated Bovine Adrenal Medullary Chromaffin Cells Transplanted in Rats' Spinal Cord Produce Analgesic Effects? / 대한마취과학회지

BACKGROUND: Pain remains the chief complaint that brings patients to physician's office, despite recent insights into underlying mechanism and the identification of potential new therapeutic targets. In recent years, however, with the development of molecular biology cell transplantation gives us a new chance for treating intractable chronic pain. The major purpose of the present study was to determine if the chromaffin cells that were encapsulated with 1.3% (w/v) sodium alginate-poly-l-lysine-alginate (APA) had robust analgesic effects in the spinal atlanto-occipital subarachnoid space even without nicotine stimulation. METHODS: In order to determine whether microencapsulated bovine adrenal medullary chromaffin cells transplanted in the spinal cord can produce analgesic effects, we microencapsulated adrenal medullary chromaffin cells with APA and implanted them into the subarachnoid space of rats' (n = 10) spinal cord, and investigated the hot sensitivity of rats' hind-paw by a light-beam test. RESULTS: It was found that compared with the control group, hot response latency of the group which received adrenal medullary chromaffin cells increased from the 12th day and the analgesic efficacy was maintained for at least 75 days. CONCLUSIONS: Microencapsulated bovine adrenal medullary chromaffin cells transplanted in the rats' spinal cord may provide a permanent and locally available source of neuropeptides for the relief of intractable pain. Furthermore, these kinds of analgesic effect were produced without any stimulation such as nicotine.