Continuous Ambulatory Peritoneal Dialysis-Associated Peritonitis Caused by Achromobacter xylosoxidans: A Case Report and Comprehensive Literature Review / 감염과화학요법

Achromobacter xylosoxidans is an uncommon cause of peritonitis in patients on maintenance continuous ambulatory peritoneal dialysis (CAPD). CAPD peritonitis caused by Achromobacter xylosoxidans carries high mortality and recurrence rates because of its virulence and resistance to most antimicrobial agents. We experienced a case of CAPD peritonitis caused by Achromobacter xylosoxidans in a patient with hypertension, diabetes mellitus, and end stage renal disease. The patient was treated with intravenous imipenem/cilastatin, and the CAPD catheter was removed. However, the patient died by aspiration pneumonia on the 34th day of hospitalization.

Oral health status and treatment need of institutionalized elderly patients / 대한치과보철학회지

STATEMENT OF PROBLEMS: In the area of dental care, the institutionalized elderly have placed the most vulnerable state, and we cannot find their subjective need of dental treatment because of the physical and mental disabilities, But we have no basic investigation of their oral health conditions. PURPOSE: The aims of the current study were to investigate the oral health status of institutionalized elderly patients who are in the least benefited side of dental service, and to analyze their dental treatment needs. MATERIAL AND METHODS: The survey of the oral status was carried out on 758 institutionalized elderly, and 212 elderly who was more than 65 years old from D dental office, and it was based on the Guidelines of Oral Health Research of year 2000 in Republic of Korea. RESULTS AND CONCLUSION: The DMFT index of the institutionalized elderly appeared higher than that of the same ages in control group, and it increased with age. The number of residual teeth of the institutionalized elderly appeared lower than that of the same ages in control group, and it decreased with age (p < .05). The number of fixed partial denture in institutionalized elderly was lower than that of the same ages in control group (p < .05). The percentage wearing removable partial denture was not significant between the elderly in institutions and the control group, and was not different according to age between the two groups. The percentage of institutionalized elderly wearing complete denture appeared lower than that of the same ages in control group, and it increased with age. The percentage of institutionalized elderly needing complete denture was higher than that of control group, and the percentage of elderly needing complete denture on the maxilla was higher than that of the mandible. 16.35% of the institutionalized elderly was living without denture in spite of their fully edentulous state. The need for complete denture increased rapidly with age. The number of valued teeth and dental prostheses in shortened dental arch concept and number of occluding pairs of teeth of institutionalized elderly were lower than that of the control group (p < .05). In institutionalized elderly, the number of residual teeth, the number of fixed partial dentures, and the percentage wearing removable partial dentures were higher in the mandible, and the percentage wearing complete dentures was higher in the maxilla (p < .05). The rate of institutionalized elderly needing prosthodontic treatment appeared to be 67.82%, where the number of occluding pairs of teeth was less than 10. When it is difficult to evaluate the subjective need of dental treatment as with the institutionalized elderly, estimation using the number of occluding pairs of teeth can be a useful indicator that can project treatment needs. For the oral health care of institutionalized elderly, it is essential to increase the awareness of nurses and caregivers who take care of them, about the importance of the oral health. Since the average life span and number of residual teeth are increasing gradually, the welfare policy should be changed to implementing regular dental examinations, preservative treatment forms and oral health control of dentulous patients where the traveling-treatment system and visit system are supplemented. And principles should be set that the present denture project of edentulous patients should be done by specialists who'll also be responsible for postmanagement. Through this research of institutionalized elderly, the oral health status which is worsened by aging could be confirmed. And the interest and positive participation of dental society on the elderly should come first in order to solve the rising treatment needs of the elderly patients.

The influencing factors of periotest. value and implant stability quotient / 대한치과보철학회지

STATEMENT OF PROBLEM: Periotest. and OsstellTM were known as the most objective and quantitative mobility tests available for evaluating stability of implant in vivo. Although a correlation between PTV widely used and ISQ recently introduced exist, a PTV was corresponded to various ISQ. A correct evaluation of implant stability could be obtained only after one has a thorough understanding of the limitations of devices and factors that affect measurements. PURPOSE: The purpose of this study was to investigate the causes of variables in the values obtained with these two tests. MATERIAL AND METHOD: A total of 333 implants: 134 Bra.nemark, 5 Silhouette and 194 ITI implants were investigated. Result: 1. There was a correlation between PTV and ISQ (Spearman correlation =0.39, p<0.0001) 2. The factors that affected ISQ were diameter of implant fixture, location of implant and implant system (submerged type vs non-submerged type). 3. The factors that affected PTV were diameter of implant fixture, location of implant, and elapsed time after implant placement. 4. There was no significant difference between different surface treatments of RBM, smooth surface and ti-unite on PTV and ISQ. 5. In radiographic finding, no saucerization or bone resorption has been detected in implants with ISQ values that were above the average level of each PTV. These higher values had higher bone densities around the implant fixture. Saucerization was observed in the most impants with ISQ values that were below the average level of each PTV. CONCLUSION: There was a correlation between ISQ and PTV. However, each measuring methods had factors influencing the measured values. PTV were less sensitive to marginal bone resorption and influenced with the striking point on an implant to the level of bone. With ISQ, the height of implant from bone level to transducer should be considered.

The influencing factors of periotest. value and implant stability quotient / 대한치과보철학회지

STATEMENT OF PROBLEM: Periotest. and OsstellTM were known as the most objective and quantitative mobility tests available for evaluating stability of implant in vivo. Although a correlation between PTV widely used and ISQ recently introduced exist, a PTV was corresponded to various ISQ. A correct evaluation of implant stability could be obtained only after one has a thorough understanding of the limitations of devices and factors that affect measurements. PURPOSE: The purpose of this study was to investigate the causes of variables in the values obtained with these two tests. MATERIAL AND METHOD: A total of 333 implants: 134 Bra.nemark, 5 Silhouette and 194 ITI implants were investigated. Result: 1. There was a correlation between PTV and ISQ (Spearman correlation =0.39, p<0.0001) 2. The factors that affected ISQ were diameter of implant fixture, location of implant and implant system (submerged type vs non-submerged type). 3. The factors that affected PTV were diameter of implant fixture, location of implant, and elapsed time after implant placement. 4. There was no significant difference between different surface treatments of RBM, smooth surface and ti-unite on PTV and ISQ. 5. In radiographic finding, no saucerization or bone resorption has been detected in implants with ISQ values that were above the average level of each PTV. These higher values had higher bone densities around the implant fixture. Saucerization was observed in the most impants with ISQ values that were below the average level of each PTV. CONCLUSION: There was a correlation between ISQ and PTV. However, each measuring methods had factors influencing the measured values. PTV were less sensitive to marginal bone resorption and influenced with the striking point on an implant to the level of bone. With ISQ, the height of implant from bone level to transducer should be considered.

Longevity and failure analysis of fixed restorations serviced in Korea / 대한치과보철학회지

STATEMENT OF PROBLEM: Every effort has been continually made to obtain objectivity in measuring the longevity of fixed restorations, such as by establishing unified judgement standard for deciding success and adopting statistical method that analyzes the data of successful and failed cases at the same time. In Korea, however, desired level of development has not to be made in this field yet. PURPOSE: This study, adopting California Dental Association (CDA) quality evaluation system, established objective standard for deciding success, and inferred the longevity of fixed restorations and their failure analysis through adopting Kaplan-Meier survival analysis. Material and method. In order to assess the longevity of fixed restorations serviced in Korea and causes of failure, a total of 1109 individuals (aged 15-74, 716 women and 393 men loaded with 2551 unit fixed restorations, and 1934 abutments) who lived in Kyung-In Province were examined and the findings were as follows: RESULTS: 1. Length of service of fixed restorations serviced in Korea was 6.86+/-0.15 yr (mean), 5.5 yr (median), and the rate of success was 65.82% in 5 year survival, and 21.15% in 10 year survival. 2. When there was patient's need for replacing old prosthetics, longevity of fixed restorations was 7.51+/-0.27 yr (mean), 7 yr (median), and the rate of success was 61.08% in 5 year survival, and 17.57% in 10 year survival. 3. Longevity of fixed restorations was longest in the over-sixty age group(9.21+/- 0.66) and that of the teen age group(3.39+/-0.28) was shortest (p0.05). 9. Longevity of fixed restorations made of non precious metal was longest (9.60+/-0.40 yr), semi precious and precious trailing behind(p0.05). 11. Longevity of fixed restorations was longest in the centric interference group(9.35+/-0.62) (p<0.05) among different types of occlusal interference. CONCLUSION: We found that longevity of fixed restorations serviced in Korea is affected by age, gender and type of material, and that most frequent cause of failure is defective margin. In order to assess the accurate longevity of fixed restorations, unified research design, overcoming inter-observer difference and establishing the objective research items are needed. Furthermore, it is thought that prospective approach through thorough study and regular follow-ups is needed just from the start of research. Nationwide detailed studies on length of service of fixed restorations manufactured in Korea are hoped to be conducted hereafter.

Computer-aided casting design for implant titanium superstructures / 대한치과보철학회지

STATEMENT OF PROBLEM: It is difficult to obtain a good titanium casting body using the traditional sprue design because of high melting point of Ti, and the low fluidity and high reactivity of molten Ti. PURPOSE: A new sprue design for titanium casting bodies needs more trial and error. In order to decrease the number of trial and error, computer simulation(MAGMASOFT, Magmasoft Giessereitechnologie GmbH, Achen, Germany) was used to optimize sprue design in U-shaped implant superstructures. MATERIAL AND METHOD: Five kinds of sprue were examined for the design of the sprue former for titanium casting: Sprue design A(sprue length 4 mm, rectangular shape, 4 sprues), Sprue design B(sprue length 4 mm, round shape, radius 2 mm, 7 sprues), Sprue design C (sprue length 2 mm, round shape, radius 2 mm, 7 sprues), Sprue design D (sprue length 2 mm, cone shape, large radius 3mm, small radius 2mm, 7 sprues), and Sprue design E( sprue length 2 mm, one unit channel shape). Sprue design F(sprue length 2mm, one unit channel hape) was also examined for the design of the customized sprue former in the Biotan system(Schutz Dental Gmbh, Germany). The casting bodies were taken in Sprue design A, Sprue design D, Sprue design E, and Sprue design F in the Biotan casting system. The numerically predicted defects were compared with the experimental dental castings by the radiographic and sectional view observations. RESULTS: 1. According to the result of computer simulation, turbulence during mold filling was decreased in the sequence of Sprue design F, Sprue design E, Sprue design D, Sprue design C, Sprue design B, and Sprue design A. 2. The calculated solidification time contours indicate that hot spot was moved from the casting body to the sprue button in the sequence of Sprue design A, Sprue design B, Sprue design C, Sprue design D, and Sprue design E. The filling pattern of Sprue design F was similar to that of Sprue design E. 3. The predicted filling pattern shows that less turbulence was found in the customized sprue former than in the standard sprue former. 4. According to the results of the radiographic and cross sectional observations, casting defects less than 1mm were found at the center of a casting body with Sprue design E and Sprue design F. However, larger casting defects of 4mm were found in a casting with Sprue design A. 5. The predicted casting porosity was similar to that of the real casting. CONCLUSION: One unit channel-type and customized sprue former can be recommended. Further research and development of various sprue designs using computer simulation is necessary to optimize casting design, in order to reduce the formation of casting defects in implant titanium superstructures.

Automation of Solid-state Bioreactor for Oyster Mushroom Composting

This study focused on the production of high quality compost for the growth of aero-thermophilic fungi, which has a promoting effect on the growth rate and production of oyster mushrooms. The automated solid-state bioreactor system was designed on the basis of a Three-Phase-One system, which controls the serial steps of prewetting, pasteurization and fermentation processes. High numbers of thermophilic fungi and bacteria were recovered from the mushroom composts prepared by this solid-state bioreactor. The rates of composting process were depended on physical as well as chemical factors. Among these factors, the parameters of moisture content and temperature were found to be particularly important. In our automated system, constant levels of moisture content, temperature and ventilation via mixing were provided by a centralized control apparatus including PLC, water tank and water jacket systems. These features induced higher microbiological activity of aero-thermophiles.

A STUDY ON DIFFERENT AMOUNT OF DENTURE BASE DISPLACEMENT USING SOFT DENTURE RELINING MATERIAL UNDER MASTICATORY FORCE / 대한치과보철학회지

The purpose of this study was to determine how to use soft relining material by observing an amount of denture displacement according to the different base area of residual ridge and thickness of soft relining material under masticatory force. Stone models that simulated residual ridge were made with different amount of denture base area and denture was fabricated by conventional heat curing resin with usual manner on the model and relined by silicone type soft relining material with different thickness. Specimen was examined the amount of denture displacement by Instron within range of normal occlusal force. The results were as following: 1. The increasing rate of denture displacement was higher than that of soft relining material thickness. 2. The amount of denture displacement decreased 1.7 times when base area became double at same thickness of soft relining material 3. The increasing rate of denture displacement was higher than that of occlusal force

COMPARISON OF SHEAR BOND STRENGTH AND MARGINAL LEAKAGE OF RESIN MODIFIED GLASS IONOMER CEMENTS / 대한치과보철학회지

The resin modified glass ionomer cements(RMGICs) have been used for years since 1989. Recently it has been developed for luting of fixed restorations. To evaluate the bond strength and marginal leakage of RMGICs for luting usage, the 80 extracted human molars which had uniform area of exposed dentin were cemented with 3 types of RMGICs(Fuji Duet, Advance, Vitremer), a conventional Glass Ionomer Cement(GIC-Fuji I), and a resin cement (Panavia 21) to base metal alloy(Ni-Cr-Be). After thermocycling the specimens were immersed in basic fuschin dye for measuring marginal leakage. The shear bond strength was measured with Instron and the maximum dye penetration was measured to 0.1mm. The type of fractured patterns were determined with stereoscope (x7.5). The results are as follows. 1. The difference between 3 RMGICs and a conventional GIC in shear bond strength was not statistically significant. It seemed that RMGICs had lower shear bond strength than resin cement. (p<0.01) 2. The mean scores of marginal leakage had no significant difference between the resin cement and 3 RMGICs but it was much higher in conventional GIC than the RMGICs (p<0.05) 3. It was determined that the manufacturer and the methods of dentin pretreatment determined the pattern of fracture surface and the frequency of adhesive failure between teeth and 3 RMGICs standed as in following order - Vitremer, Advance, Fuji Duet. (p<0.01) When the fracture pattern was analyzed, it could be said that the materials and the method of dentin pretreatment have much effect on bonding states. This means that the dentin bonding agents should be improved. But the limited products in this experiment can not evaluate the physical properties of the entire RMGICs. Therefore a further study which can evaluate various RMGICs should be in progress to develop better cements.

Suppressed Secretion of The Extracellular Matrix of The Cultured Corneal Epithelial Cell following Inoculation of HSV-1

In order to assess the extracellular matrix(ECM) secretion of corneal epithelial cells inoculated with herpes simplex virus-1 in vitro the indirect immunofluorescent technique was used. In this study, ECM such as fibronectin, type IV collagen and laminin were rich in cultured rabbit corneal epithelial cells under the normal condition, while those became poor after inoculation with herpes simplex virus-1. This result suggested that herpes simplex virus-1 inhibit ECM secretion of the corneal epithelial cells. These findings mean that delayed epithelial wound healing after herpes simplex virus-1 infection is due to suppressed secretion of ECM which is the principal component of corneal epithelial wound healing.

Demonstration of Virus in Retinal Necrosis following Intravitreal Inoculation of Herpes Simplex Virus-1

This study was performed to observe the retinal changes in rabbits by intravitreal inoculation of HSV-1. The solution of HSV-1 virus(Kos strain) was inoculated into the vitreous cavity in 5 eyes. All the eyes were checked with a slit lamp and an indirect ophthalmoscope. Two eyes that showed the retinal lesion were enucleated for the histopathologic examination. The focal infiltration of inflammatory cells was marked around the retinal vessels in one eye and there was the diffuse infiltration of plasma cells and lymphocytes in the choroid and the retina in the other eye. The pattern of proliferation and migration of retinal pigment epithelial cells was observed at the outer retina. The virus-infected nuclei were evident in the photoreceptor cells and ganglion cells. The viral particles and intranuclear inclusion were prominent in the deformed nuclei and free-floating viral particle was shown at the extracellular space of the necrotic retina. These results suggest that the intravitreal inoculation of HSV-1 might induce retinal necrosis. The inflammatory reactions was initiated at the vitreoretinal interface and perivascular area. Virus might be propagated through axons or infected cell from free-flating virus.

Molteno Implantation for Neovascular Glaucoma with a Laser-Releasable Intracameral Ligature to Limit Postoperative Pressure Fluctuations

We incorporated a 9-0 nylon ligature on the intracameral portion of the Molteno tube to limit postoperative hypotony in 15 eyes of 14 neovascular glaucoma patients. Postoperative hypotony, less than 5mmHg occured in 2 eyes at 1 week, and none thereafter. Argon laser release of the ligature, performed an average of 29 +/- 24 days after surgery, resulted in intraocular pressure reduction in all cases. After 7.3 +/- 3.3 months, the intraocular pressure was significantly lower(47.3 +/- 11.5 vs 18.7 +/- 7.7mmHg, p=0.0007) on less medications(2.2 +/- 1.0 vs 0.3 +/- 0.6, p=0.0008). Thirteen eyes(87%) achieved an intraocular pressure less than 21mmHg and twelve eyes(80%) maintained or improved their preoperative visual acuity. The releasable internal ligature is effective in limiting hypotony and intraocular pressure contral.

A study on the histological changes and the distribution oflangerhans cells of the alveolar mucosa in denture and nondenture wearers / 대한치과보철학회지

No abstract available.

An analysis of 2361 cases of renal biopsy in Korea

To evaluate the distribution pattern of renal diseases based on needle biopsy, we analyzed 2361 cases of renal biopsy and necropsy material examined at the Department of Pathology from 1973 to 1988. The average age was 21.1 years for males and 23.7 years for females. The adult cases comprised 60.2% and the child cases 39.8%. The male to female ratio was 1.6: 1 in adults and 2.3:1 in children. Glomerular diseases were 97.8% of the total; primary glomerulonephritis (GN) 59.8% and secondary GN 27.6% The major glomerular diseases, in descending order of frequency, were; minimal change nephrotic syndrome (MCNS; 24.2%), IgA nephropathy (IgAN; 17.8%), benign recurrent hematuria (BRH; 8.8%), membranous GN (MGN; 7.9%), acute poststreptococcal GN (APSGN; 7.3%), mesangioproliferative GN (MspGN; 5.5%), minimal mesangiopathy (5.5%), membranoproliferative GN(4.1%), and focal segmental glomerulosclerosis (FSGS; 2.7%). GN of systemic disease included 77 cases of lupus nephritis, 157 cases of Henoch-Schonlein purpura nephritis (HSPN) and 7 cases of systemic infection excluding Hepatitis B viral hepatitis. The most common glomerular diseases were MCNS, IgAN, MGN and MspGN in adults, and MCNS, BRH, HSP-N and APSGN in children. HBs antigenemia was found in 71 cases, of which MGN and IgAN were the most frequent. HBs antigenemia-associated MGN was prevalent in male children, whereas IgAN was prevalent in adults.