Analise de custo por resposta de adalimumabe, etanercepte, guselcumabe, infliximabe, ixequizumabe, secuquinumabe e ustequinumabe para tratamento de psoríase em placas moderada a grave sob a perspectiva do Sistema de Saúde Suplementar brasileiro / Cost per response analysis of adalimumab, etanercept, guselkumab, infliximab, ixekizumab, secukinumab and ustekinumab for the treatment of moderate to severe plaque psoriasis from the Brazilian private health care system perspective

O OBJETIVO: deste estudo é avaliar o custo por resposta das terapias biológicas disponíveis no Brasil para o tratamento da psoríase em placas moderada a grave na perspectiva do Sistema de Saúde Suplementar. MÉTODOS: A resposta PASI 90 foi o desfecho avaliado neste estudo. Dados clíni-cos foram calculados com base na razão de risco de uma metanálise em rede, comparando adalimu-mabe, etanercepte, infliximabe, ixequizumabe, secuquinumabe e ustequinumabe a guselcumabe, cujo dado foi obtido no estudo clínico. Foram considerados apenas os custos de medicamentos. O caso-base avaliou o custo por resposta do ano de indução do tratamento. Além disso, conduziu-se uma análise de orçamento fixo. Em um cenário alternativo, analisou-se o custo por resposta do ano de manutenção. Uma análise de sensibilidade avaliou incertezas dos dados clínicos. RESULTADOS: O menor custo por resposta foi de guselcumabe (R$ 98.643), seguido de ixequizumabe (R$ 112.549), ustequinumabe (R$ 124.078), secuquinumabe (R$ 160.930), infliximabe (R$ 208.039), adalimumabe (R$ 208.686) e etanercepte (R$ 639.124). Resultados similares foram observados no cenário alterna-tivo, considerando os custos no ano de manutenção. Guselcumabe demonstrou ser a terapia que tratou mais pacientes com sucesso, considerando um cenário de orçamento fixo. Conclusão: O presente estudo demonstrou que, na perspectiva do Sistema de Saúde Suplementar brasileiro, gu-selcumabe possui o menor custo por resposta entre as terapias biológicas para psoríase em placas moderada a grave, além de tratar com sucesso mais pacientes em um cenário de orçamento fixo.

Objective: This study aims to evaluate the cost per response of the biologic therapies available for moderate to severe plaque psoriasis treatment in Brazil from a private payer perspective Methods: Treatment response evaluated in this study was the achievement of PASI 90. Clinical data was calculated based on the risk ratio of a network meta-analysis comparing adalimumab, etanercept, infliximab, ixekizumab, secukinumab and ustekinumab to guselkumab, which data was extracted from clinical trials. Only drug acquisition cost were considered. Base case analysis evaluated the first year of treatment cost per response Besides that, a fixed budget analysis was conducted. An alternative scenario analysis considered the maintenance year cost per response. A sensitivity analysis evaluated the clinical data uncertainties. Results: The lowest cost per response was obtained with guselkumab (R$98.643), followed by ixekizumab (R$ 112.549), ustekinumab (R$ 124.078), secukinumab (R$ 160.930), infliximab (R$ 208.039), adalimumab (R$ 208.686), and etanercept (R$ 639.124). Similar results were found in the alternative scenario, with maintenance year costs. Guselkumab demonstrated to be the therapy which successfully treats more patients with a fixed budget. Conclusion: In conclusion, this study demonstrated that, from the Brazilian private payer perspective, guselkumab presents the lowest cost per response among the avail-able biologic therapies for moderate to severe plaque psoriasis, and is able to successfully treat more patients in a limited budget scenario.

Screw loosening of different UCLA-type abutments after mechanical cycling

AIM: To evaluate the loss of applied torque (detorque) values in cast and pre-machined abutments for external hex abutment/implant interface of single implant-supported prostheses subjected to mechanical cycling. METHODS: Ten metal crowns were fabricated using two types of UCLA abutments: cast and pre-machined with metal base in NiCrTi alloy and tightened to regular external hex implants with a titanium alloy screw, with an insertion torque of 32 N.cm, measured with a digital torque gauge. Samples were embedded with autopolymerizing acrylic resin in a stainless steel cylindrical matrix, and positioned in an electromechanical machine. Dynamic oblique loading of 120 N was applied during 5 x 10(5) cycles. Then, each sample was removed from the resin and detorque values were measured using the same digital torque gauge. The difference of the initial (torque) and final (detorque) measurement was registered and the results were expressed as percentage of initial torque. The results of torque loss were expressed as percentage of the initial torque and subjected to statistical analysis by the Student's t-test (p<0.05) for comparisons between the test groups. RESULTS: Statistical analysis demonstrated that mechanical cycling reduced the torque of abutments without significant difference between cast or pre-machined UCLA abutments (p=0.908). CONCLUSIONS: Within the limitations of this in vitro study, it may be concluded that the mechanical cycling, corresponding to one-year use, reduced the torque of the samples regardless if cast or pre-machined UCLA abutments were used.