RESUMEN
Objective: To enrich small bioactive compounds from Mailuoning Injection factory effluene by polyether sulfoxide hollow fiber membrane. Methods: The retention rate of the common polymer (protein, tannin, starch, and pectin) and the permeability of the small molecule pharmacodynamic substance chlorogenic acid were the indicators, and the stop time and membrane type in ultrafiltration process were optimized. The temperature, pressure, and feed rate were investigated to determine the influence degree of each factor on the permeability and retention rate, and then the optimum process parameters of the ultrafiltration membrane process were optimized by using Box-Behnken design-response surface method. Results: The sequence of common polymer retention rate from high to low is: the influencing factor A (temperature), B (pressure), C (feed rate), and there was a negative correlation with the temperature. For the chlorogenic acid transmission rate, the influencing factor A (temperature) was larger than B (pressure), and C (feed rate) was lowest. There was a “∩” relationship between chlorogenic acid permeability and pressure at a certain temperature and rate. The results of optimized process were as follows: liquid temperature was 35 ℃, feed rate was 262 mL/min, and membrane pressure was 15.0 psi (1 psi = 6.895 kPa). The chlorogenic acid transmission rate was (91.470 ± 0.988)%, and polymer retention rate was (80.080 ± 2.296)%. The comprehensive score was (85.780 ± 1.641)% and RSD was 0.46%. There was a small difference between the two processes. Conclusion: Hollow fiber membrane, which is a sustainable and green resource utilization, has a good permeability for small bioactive compounds in wastewater, and has excellent retaining effect on common macromolecules.