Design of Pulse Signal Acquisition System of Adaptive Wide Dynamic Range Based on ADS125H02 / 中国医疗器械杂志

In order to solve the problem of wide input range of photocurrent, aiming at the shortage of existing pulse signal acquisition system, an adaptive pulse signal acquisition system based on ADS125H02 is designed, which has high collection accuracy, low noise, anti-interference, wide input range, high integration, etc. The measurement range of the system can reach ±10 V, and the accuracy is 0.009 μV. Experimental tests show that the design of the system can extract weak pulse signals, and has good practicality.

Development of Multi-parameter Cardiopulmonary Exercise Test System / 中国医疗器械杂志

In order to comprehensively evaluate the human body's functions of breathing, heart function and circulation metabolism under controlled conditions to diagnose respiratory and cardiac functions, a cardiopulmonary exercise test (CPET) system was developed. The system is divided into two parts:hardware and software. The hardware part includes measurement of six life information monitoring signals such as 12-lead ECG, respiratory mechanics, blood pressure, blood oxygen, carbon dioxide and oxygen. The software part realizes waveform display, storage and playback, et al. The experimental results show that the system is safe and reliable which provides reliable measurement parameters for evaluating human respiratory, cardiac function, circulation, metabolism and other functions. It has a good application prospect.

Progress and Application Status of Arteriosclerosis Detection Methods / 中国医疗器械杂志

The study comprehensively puts forward several detection methods to arteriosclerosis and mainly discusses the method for pulse wave velocity (PWV for short) and ankle brachial index (ABI for short). On the basis of methods mentioned above, a portable system device for arteriosclerosis detection based on non-invasive PWV and limb blood pressure is introduced, and expectations for the subsequent engineering design and development direction are given for reference.

Development of a Wearable Wireless ECG Monitoring System with Ultra-low Power Consumption / 中国医疗器械杂志

This study describes the development of a wireless and wearable ECG monitoring system with ultra-low power consumption. The system is mainly composed of a connection part of an ECG electrode sticker, an electrocardiogram collecting part, a data storage part, a Bluetooth main control unit, a charging module, a voltage regulator and a lithium battery. The low-power ECG acquisition chip ADS1292R and the ultra-low-power Bluetooth microcontroller nRF51822 together constitute the ECG signal acquisition and wireless data communication part. The collected ECG signals can be sent to the mobile APP through the Bluetooth function provided by the MCU, and can completly display and analysis to achieve low power system. After testing, the system power consumption is only (3.7 V×2.87 mA)10.619 mW, and if it is optimized, it can further reduce power consumption, therefore, the system design can have good applicability.

Development of a Portable Pulse Oxymetry Simulator System / 中国医疗器械杂志

This article describes the design of a portable blood oxygen simulation system that can be used to simulate various blood gas saturation states of the human body. The system can be used to simulate various states of blood gas saturation, and can also simulate large blood oxygen saturation dynamic range, pulse rate range and perfusion index range. It can be used for testing, but not for clinical examination instruments. Moreover, the system has the characteristics of small size and low cost compared with the commercial blood oxygen simulator. Although the simulation system is not directly used for the detection of blood gas saturation of patients, it is also an essential equipment in the production and testing process, so it has certain practical value.