Avaliação do manchamento e da rugosidade superficial de materiais restauradores diretos após diferentes sistemas de polimento: estudo in vitro / Assessment of surface staining and roughness of direct restorative materials after different polishing systems: in vitro study

Resumo Introdução Com o avanço estético e tecnológico dos compósitos restauradores diretos, a procura pela Odontologia Éstética tem aumentado. Objetivo Avaliar o manchamento e a rugosidade superficial dos compósitos Filtek Z350 (3M ESPE) e Filtek Bulk Fill (3M ESPE), polidos por diferentes sistemas: Disco SofLex e Disco SofLex diamantado espiral (ambos da 3M ESPE), após exposição repetitiva ao café. Material e método Neste estudo in vitro, um total de 80 discos de resina foi confeccionado, com 40 espécimes para cada compósito avaliado. Os espécimes foram ainda subdivididos em grupos (n=10) de acordo com o método de polimento ‒ SofLex e SofLex diamantado ‒ e a solução de armazenamento ‒ água deionizada (controle) e café (experimental). Após 24 horas de armazenamento em água deionizada, foi realizada a avaliação de cor e rugosidade inicial, bem como a execução dos protocolos de polimento testados. Posteriormente, os espécimes foram expostos ao processo de manchamento em café e água deionizada durante 42 dias. Após esse período, a cor e a rugosidade foram reavaliadas. Resultado A análise estatística paramétrica evidenciou que o manchamento superficial foi influenciado significativamente pelos fatores compósito e solução, mas não pelo fator polidor ou ainda por qualquer interação entre os fatores. Para o fator compósito, Filtek Z350 exibiu maior manchamento, e para o fator solução, foi observado maior manchamento para o café. Já na análise de rugosidade, não houve diferenças significativas. Conclusão Independentemente do sistema de polimento, a solução experimental de café alterou a cor de ambos os compósitos avaliados e verificou-se que a rugosidade não foi alterada.

Abstract Introduction The aesthetic and technological development of direct restorative composites has increased the search for an aesthetic dentistry. Objective Assess the surface staining and roughness of composites: Filtek Z350 (3M ESPE) and Filtek Bulk Fill (3M ESPE), polished by different systems: Disco SofLex and Disco SofLex diamond spiral (both from 3M ESPE), after repeated exposure to coffee. Material and method This study was carried out together with 80 resin discs were made, 40 articles for each study evaluated. The compounds were divided into groups (n = 10) according to the polishing method - Softex and Softex diamond, storage solution - deionized water (control) and coffee (experimental). After 24 hours of storage in deionized water, a color evaluation was performed initially, as well as the execution of the polishing protocols tested. Subsequently, the specimens were exposed to the staining process in coffee and deionized water for 42 days. After this period, the color and roughness were assessed again. Result The parametric statistical analysis showed that surface staining was affected significantly by the composite and solution factors, but not by the polisher factor or by any interaction among factors. For the composite factor, Filtek Z350 showed greater staining and for the solution factor, coffee showed greater staining. In contrast, the roughness analysis did not show significant differences. Conclusion Regardless of the polishing system, differences in composite composition affect the color stability of the composites; and coffee changes the color of both; the roughness was not altered.

Avaliação do efeito de soluções de armazenamento sobre a resistência da união adesiva à dentina de dentes bovinos sob microcisalhamento - pesquisa in vitro / Evaluation of the effect of storage solutions on the bond strength to the dentin of bovine teeth under micro-incision - in vitro research

Introdução: Com a dificuldade de obtenção de dentes humanos para estudos in vitro, autores relatam e preconizam o uso de dentes extraídos de arcadas bovinas para testar técnicas de diferentes segmentos da Odontologia. Entretanto, para que as pesquisas tenham eficácia científica, estes dentes necessitam tratamento adequado para manter suas características e simular condições in vivo. Objetivo: Analisar a resistência de união (RU) adesiva à dentina em dentes bovinos restaurados com adesivo convencional Adper® Single Bond 2 (3M ESPE, St. Paul, MN, EUA) e compósito Opallis Flow (Dentscare LTDA., Joinville, SC, BRA), tendo como fatores de estudo solução e tempo de armazenamento. Metodologia: As amostras foram congeladas sob armazenamento em 2 soluções: timol 0,1% e cloramina 0,5%, em 4 diferentes períodos: 1 semana, 1 mês, 3 meses e 6 meses. Foram obtidos 8 grupos experimentais (n=64) e 1 grupo controle (n=8), totalizando 9 grupos. Após o período de restauração, os dentes foram armazenados em estufa a 37 ºC, imersos em água destilada e, em seguida, testados em máquina de ensaios universal (EMIC DL 500, São José dos Pinhais, PR, Brasil), com análise estatística dos resultados. Resultado: A comparação entre os grupos experimentais e controle mostrou diferença estatisticamente significante (p<0,05) para o armazenamento das amostras em timol durante o período de 1 mês. Conclusão: Os fatores solução e tempo foram capazes de alterar a resistência de união adesiva à dentina bovina, observando-se que a maior média de RU foi obtida após o armazenamento na solução timol durante 1 mês (p=0,004).

Introduction: With the difficulty of obtaining human teeth for in vitro studies, authors report and recommend the use of teeth extracted from bovine arches to test techniques from different segments of Dentistry. However, for research to be scientifically effective, these teeth need adequate treatment to maintain their characteristics and to mimic conditions in vivo. Objective: Analyze the adhesive bond strength (RU) to dentin in bovine teeth restored with Adper® Single Bond 2 (3M ESPE, St Paul, MN, USA) and Opallis Flow composite adhesive (Dentscare LTDA, Joinville, SC, BRA), taking as study factors solution and storage time. Methodology: The samples were frozen under storage in 2 solutions: 0.1% thymol and 0.5% chloramine, in 4 different periods: 1 week, 1 month, 3 months and 6 months. Eight experimental groups (n = 64) and one control group (n = 8) were obtained, totaling 9 groups. After the restoration period, the teeth were stored in an incubator at 37ºC, immersed in distilled water and then tested in a universal testing machine (EMIC DL 500, São José dos Pinhais, PR, Brazil), with statistical analysis of the results. Result: The comparison between the experimental and control groups showed a statistically significant difference (p <0.05) for the storage of thymol samples during the 1 month period. Conclusion: Solution and time factors were able to change the adhesive bond strength to the bovine dentin, observing that the highest mean of RU was obtained after storage in the thymol solution for 1 month (p = 0.004).

Biological and mechanical degradation affecting the surface properties of aesthetic restorative

To evaluate the roughness (Ra), Knoop hardness (KHN) and change of color (ΔE) of esthetic restorative materials (Filtek Z350-composite nanoparticle; Empress Direct-composite nanohybrid and IPS e.Max-ceramic) subjected to contact with the Streptococcus mutans biofilm (biological degradation) associated with abrasion generated by tooth brushing (mechanical degradation). Methods: Ten specimens of each material were prepared, and the surface properties initial were evaluated. All specimens were exposed to Streptococcus mutans inoculum; after 7 days, surface properties were evaluated. The specimens were submitted to a 30,000 toothbrushing cycles, using a toothpaste slurry, then, surface properties were evaluated again. Data were analyzed by Proc-Mixed, One-way ANOVA, Tukey-Kramer and Tukey's tests (α = 0.05). Results: At the baseline, ceramic showed the highest Ra and KHN values; after the biological degradation the composites showed increased Ra, but KHN did not change; after the mechanical degradation, Empress showed decreased Ra and Z350 showed similar Ra, the KHN increased to both composites, and all materials had increased lightness after the mechanical degradation. Conclusions: The results suggest that, when exposed to Streptococcus mutans biofilm and toothbrush abrasion, the ceramics undergoes minimal degradation and the composites exhibited variable degradation, depending on the composition of the material (AU)

Randomized clinical trials of dental bleaching - Compliance with the CONSORT Statement: a systematic review

Abstract We reviewed the literature to evaluate: a) The compliance of randomized clinical trials (RCTs) on bleaching with the CONSORT; and b) the risk of bias of these studies using the Cochrane Collaboration risk of bias tool (CCRT). We searched the Cochrane Library, PubMed and other electronic databases, to find RCTs focused on bleaching (or whitening). The articles were evaluated in compliance with CONSORT in a scale: 0 = no description, 1 = poor description and 2 = adequate description. Descriptive analyses of the number of studies by journal, follow-up period, country and quality assessments were performed with CCRT for assessing risk of bias in RCTs. 185 RCTs were included for assessment. More than 30% of the studies received score 0 or 1. Protocol, flow chart, allocation concealment and sample size were more critical items, as 80% of the studies scored 0. The overall CONSORT score for the included studies was 16.7 ± 5.4 points, which represents 52.2% of the maximum CONSORT score. A significant difference among journal, country and period of time was observed (p < 0.02). Only 7.6% of the studies were judged at "low" risk; 62.1% were classified as "unclear"; and 30.3% as "high" risk of bias. The adherence of RCTs evaluating bleaching materials and techniques to the CONSORT is still low with unclear/high risk of bias.