RESUMEN
The current study was carried out systematically by conducting a review of the literature. The purpose of this study was to conduct a systematic review of the literature to determine the effects of brace wearing on sagittal parameters in adolescents with idiopathic scoliosis (AIS). In this study, PubMed/MEDLINE (National Library of Medicine), Scopus, Ovid, CINAHL, PEDro, Google Scholar, and the Cochrane Library were accessed and searched using the patient, intervention, comparison, outcome, and study design model. We included studies that looked at the effects of brace treatment on sagittal spinopelvic parameters in AIS patients over the age of 18. The studies were chosen for their cross-sectional, retrospective, or prospective observational designs, and they were published in English. Review articles, case reports, case study designs, and conference abstracts were excluded from consideration. The methodological quality of the remaining articles was assessed using the Newcastle Ottawa Scale. A total of 12 studies were chosen, and 995 participants were evaluated, with 3 (25%) and 9 (75%) having high and moderate quality, respectively. The studies were classified based on the length of follow-up. Long-term, short-term, and immediate effects of brace wearing on sagittal spinopelvic parameters were reported in four, five, and three studies, respectively. The results of nine studies showed a significant decrease in Cobb angle after wearing the brace, which contradicted the findings of the other two. The cervical and sagittal pelvic parameters, thoracic kyphosis (TK), lumbar lordosis (LL), spinopelvic parameters, and sagittal balance were all evaluated in the intended studies, yielding varying results. According to the available literature, wearing a brace flattens the TK and LL. According to this systematic review, brace treatment may affect sagittal spinopelvic parameters in adolescents with AIS, particularly in TK and LL. The cervical and pelvic parameters yielded inconclusive results. This study backs up the idea that brace design and structure can influence sagittal parameter changes. The limitations of this study include different methods of parameter measurement, variations in the brace types and wear time, varying follow-up duration, and differences in participant characteristics.
RESUMEN
Methods@#We evaluated the translation and back translation of the EOSQ-24 and made the required revisions as per the analysis performed by the expert committee and an international guideline to adapt it for use in this study. Thereafter, we recruited 100 EOS patients in order to evaluate its reliability and validity. The reliability was assessed with internal consistency. Convergent validity was assessed by comparing the scores of the EOSQ-24 and the 22-item Scoliosis Research Society Questionnaire (SRS-22r). Finally, the known groups validity was assessed as per patient’s sex, curve magnitude, and treatment type. @*Results@#The Persian EOSQ-24 demonstrated very good internal consistency (Cronbach’s α=0.88). All the items had an acceptable corrected item-total correlation (>0.3). Further, the EOSQ-24 and the SRS-22r scores (p <0.001) were significantly correlated. The EOSQ-24 could discriminate patients with different curve magnitudes. @*Conclusions@#The Persian EOSQ-24 can serve as a disease-specific instrument with strong validity and reliability in the evaluation of EOS patients. Its applicability in other Persian-speaking countries and regions of the world needs to be investigated further.
RESUMEN
The efficiency and design quality of scoliosis braces produced by the conventional casting method depends highly on the orthotist’s experience. Recently, advanced engineering techniques have been used with the aim of improving the quality of brace design and associated clinical outcomes. Numerically controlled machine tools have provided enormous opportunities for reducing the manufacturing time and saving material. However, the effectiveness of computer-aided brace manufacturing for scoliosis curve improvement is controversial. This narrative review is aimed at comparing the efficacy of braces made by the conventional method with those made by two computer-aided methods: computer-aided design and manufacturing (CAD-CAM), and computer-aided design and finite element modeling (CAD-FEM). The comparison was performed on scoliosis parameters in coronal, sagittal, and transverse planes. Scientific databases were searched, and 11 studies were selected for this review. Because of the diversity of study designs, it was not possible to decisively conclude which brace-manufacturing method is most effective. Similar effectiveness in curve correction was found in the coronal plane for braces made by using advanced manufacturing and conventional methods. In the sagittal plane, modern braces seem to be more effective than traditional braces, but there is an ongoing debate among clinicians, about which CAD-CAM and CAD-FEM brace provides a better treatment outcome. The relative effectiveness of modern and conventional methods in correcting deformities in the transverse plane is also a controversial subject. Overall, advanced engineering design and production methods can be proposed as time- and cost-efficient approaches for scoliosis management. However, there is insufficient evidence yet to conclude that CAD-CAM, and CAD-FEM methods provide significantly better clinical outcomes than those of conventional methods in the treatment of scoliosis curve. Moreover, for some factors, such as molding and the patient’s posture during the data acquisition, in brace curve-correction plan, the orthotist’s experience and scoliosis curve flexibility should be explored to confidently compare the outcomes of conventional, CAD-CAM, and CAD-FEM methods.
RESUMEN
The efficiency and design quality of scoliosis braces produced by the conventional casting method depends highly on the orthotist’s experience. Recently, advanced engineering techniques have been used with the aim of improving the quality of brace design and associated clinical outcomes. Numerically controlled machine tools have provided enormous opportunities for reducing the manufacturing time and saving material. However, the effectiveness of computer-aided brace manufacturing for scoliosis curve improvement is controversial. This narrative review is aimed at comparing the efficacy of braces made by the conventional method with those made by two computer-aided methods: computer-aided design and manufacturing (CAD-CAM), and computer-aided design and finite element modeling (CAD-FEM). The comparison was performed on scoliosis parameters in coronal, sagittal, and transverse planes. Scientific databases were searched, and 11 studies were selected for this review. Because of the diversity of study designs, it was not possible to decisively conclude which brace-manufacturing method is most effective. Similar effectiveness in curve correction was found in the coronal plane for braces made by using advanced manufacturing and conventional methods. In the sagittal plane, modern braces seem to be more effective than traditional braces, but there is an ongoing debate among clinicians, about which CAD-CAM and CAD-FEM brace provides a better treatment outcome. The relative effectiveness of modern and conventional methods in correcting deformities in the transverse plane is also a controversial subject. Overall, advanced engineering design and production methods can be proposed as time- and cost-efficient approaches for scoliosis management. However, there is insufficient evidence yet to conclude that CAD-CAM, and CAD-FEM methods provide significantly better clinical outcomes than those of conventional methods in the treatment of scoliosis curve. Moreover, for some factors, such as molding and the patient’s posture during the data acquisition, in brace curve-correction plan, the orthotist’s experience and scoliosis curve flexibility should be explored to confidently compare the outcomes of conventional, CAD-CAM, and CAD-FEM methods.
RESUMEN
STUDY DESIGN: This was a prospective cohort study.PURPOSE: This study aimed to evaluate the potential differences between the objective and subjective bracing compliances of adolescents with Scheuermann’s kyphosis.OVERVIEW OF LITERATURE: Bracing is a well-documented intervention for managing adolescents with progressive thoracic Scheuermann’s kyphosis, and the brace should be worn 23 hours every day. Most research studies that have investigated the efficacy of bracing have assumed that the patients wore the braces as advised or that the bracing time was measured subjectively. This may be one of the reasons for the conflicting reports regarding the efficacy of bracing.METHODS: Nineteen volunteers (11 girls and 7 boys, 12.89±1.77 years) who were prescribed Milwaukee braces for Scheuermann’s kyphosis were enrolled. Each brace was equipped with a miniature temperature logger to record the actual brace wearing time over a period of 3 weeks. The patients and their families were unaware of the mounted sensor. Each participants and/or parent was provided with a questionnaire to record the number of hours for which the brace was worn each day. In addition, the therapist asked each patient and/or his/her parent about the average number of hours that the brace was worn.RESULTS: The compliance rates measured using the temperature logger (16.00±4.90 hours daily) were significantly lower than those reported in the questionnaires (19.52±6.04 hours daily, p<0.001) and the verbal responses (20.21±6.05 hours daily, p<0.001). Moreover, there was no correlation of age, sex, and body mass index with brace compliance.CONCLUSIONS: The braces were worn less often than reported by the patients and/or their parents. Therefore, objective compliance assessments of adolescents with Scheuermann’s kyphosis in a brace are recommended for future studies.
Asunto(s)
Adolescente , Femenino , Humanos , Índice de Masa Corporal , Tirantes , Estudios de Cohortes , Adaptabilidad , Cifosis , Padres , Estudios Prospectivos , Escoliosis , VoluntariosRESUMEN
STUDY DESIGN: In this prospective study, we measured the pad pressures of the Milwaukee brace in adolescent hyperkyphosis treatment. PURPOSE: We evaluated the skin-brace interface forces exerted by the main pads of the Milwaukee brace. OVERVIEW OF LITERATURE: A fundamental factor associated with brace effectiveness in spinal deformity is pad force adjustment. However, few studies have evaluated the in-brace force magnitude and its effect on curve correction. METHODS: Interface forces at four pads of the Milwaukee brace were measured in 73 patients withround back deformity (mean age, 14.04±1.97 years [range, 10–18]; mean initial Cobb angle,67.70°±9.23° [range, 50°–86°]). We used a modified aneroid sphygmomanometer to measure the shoulder and kyphosis pad pressures. Each patient underwent measurement in the standing and sitting positions during inhalation/exhalation. RESULTS: The mean pad pressures were significantly higher in the standing than in thesitting position, and significantly higher pressures were observed during inhalation compared toexhalation (p=0.001).There were no statistically significant differences between right and left shoulder pad pressures (p>0.05); however, the pressure differences between the right and left kyphosis pads were statistically significant (p<0.05). In a comparison of corrective forces with bracing for less or more than 6 months, corrective force was larger with bracing for less than 6 months (p=0.02). In the standing position, there were no statistically significant correlations between pad pressures and kyphosis curve correction. CONCLUSIONS: In the sitting position, there was a trend toward lower forces at the skin-brace interface; therefore, brace adjustment in the standing position may be useful and more effective. There was no significant correlation between the magnitude of the pad pressures and the degree of in-brace curve correction.
Asunto(s)
Adolescente , Humanos , Tirantes , Anomalías Congénitas , Inhalación , Cifosis , Postura , Estudios Prospectivos , Enfermedad de Scheuermann , Hombro , EsfigmomanometrosRESUMEN
Objective: Bracing along with exercising is the most effective protocol in patients with idiopathic scoliosis which have Cobb angles of 25 to 45 degrees. However, since the psychological aspects of scoliosis treatment may affect the quality of life, and the exact time for adjusting the pads of Milwaukee brace is unknown; Therefore the aim of this study was evaluating the effect of exercising in a group, with adjusting the brace in shorter intervals, in compare to routine protocol, in the treatment of idiopathic scoliosis
Materials and Methods: Thirty-four patients with idiopathic scoliosis which had Cobb angles of 50 to 15 degrees were included in this study and were divided into experimental and control groups. The patients of two groups participated in an eleven-week treatment program, differ between the two groups. Quality of life scores of both groups were evaluated before and after intervention using SRS-22 questionnaire, as well as scoliosis angles before and after the intervention according to the primary and secondary radiographic X-rays
Results: Statistical analysis was performed using Paired T-Test in each group, and Independent T-Test between the two groups before and after treatment. The severity of scoliosis curvature and satisfaction domain of the experimental group was reduced significantly in compared with the control group, after intervention [P=0.04]. Moreover in the case of the quality of life in patients with Cobb angles less than 30 degrees, compared with patients with Cobb angles greater than 31 degrees, in the domains of selfimage, satisfaction, and total score, the difference was significant [P<0.05]
Conclusion: Adjusting the brace at shorter intervals along with exercising as a group, during the eleven weeks of treatment, has increased satisfaction and reduced the scoliosis Cobb angles of patients