RESUMEN
Cryoablation (CRA) and microwave ablation (MWA) are two main local treatments for hepatocellular carcinoma (HCC). However, which one is more curative and suitable for combining with immunotherapy is still controversial. Herein, CRA induced higher tumoral PD-L1 expression and more T cells infiltration, but less PD-L1highCD11b+ myeloid cells infiltration than MWA in HCC. Furthermore, CRA had better curative effect than MWA for anti-PD-L1 combination therapy in mouse models. Mechanistically, anti-PD-L1 antibody facilitated infiltration of CD8+ T cells by enhancing the secretion of CXCL9 from cDC1 cells after CRA therapy. On the other hand, anti-PD-L1 antibody promoted the infiltration of NK cells to eliminate PD-L1highCD11b+ myeloid cells by antibody-dependent cell-mediated cytotoxicity (ADCC) effect after CRA therapy. Both aspects relieved the immunosuppressive microenvironment after CRA therapy. Notably, the wild-type PD-L1 Avelumab (Bavencio), compared to the mutant PD-L1 atezolizumab (Tecentriq), was better at inducing the ADCC effect to target PD-L1highCD11b+ myeloid cells. Collectively, our study uncovered the novel insights that CRA showed superior curative effect than MWA in combining with anti-PD-L1 antibody by strengthening CTL/NK cell immune responses, which provided a strong rationale for combining CRA and PD-L1 blockade in the clinical treatment for HCC.
RESUMEN
To evaluate the clinical results of reconstruction orbital defect with craniomaxillofacial implant. Three patients with orbital defect were treated with ten implants. The magnetic abutments were attached six months after one stage operation and the prostheses were fabricated. Within 11 to 47 months of follow up, all implants were stable with successful osseointegration. The prosthesis fit the orbital defects well. Reconstruction of orbital defect with craniomaxillofacial implant can be considered as a viable alternative treatment.
RESUMEN
Objective To investigate if anodal transcranial direct current stimulation (atDCS) of the right cerebellum improves verbal working memory in amnesic persons with mild cognitive impairment (aMCI).Methods Thirty-nine aMCI were randomly divided into an observation and a control group using a random number table.The observation group was given atDCS at 1.2 mA for 20 minutes every day for 5 days,while the control group was provid ed with fake atDCS in the same way.Before and after the treatment,both groups were tested using forward and back ward digit spans,word reading,visually cued sensorimotor tests and finger tapping.Results After the treatment,the forward and backward digit spans of the observation group had improved significantly compared with before the treatment and with the control group's improvements.Significant improvement was observed in the average backward digit span of the control group,but not in their forward digit span after the treatment.No significant differences be tween the two groups were observed in the other measurements before or after the treatment.Conclusion Direct current stimulation of the cerebellum may improve the verbal working memory deficits of aMCI.Further research should be conducted to find the mechanism.
RESUMEN
BACKGROUND:Bone marrow mesenchymal stem cel s have been shown to be differentiated into periodontal ligament fibroblasts when co-cultured with periodontal ligament cel s. Existing studies have shown that estrogen has the ability to influence bone marrow regeneration. OBJECTIVE:To investigate the effects of estrogen on osteogenesis and fibroblast-related factors alkaline phosphatase, type I and III col agen in bone marrow mesenchymal stem cel s. METHODS:Bone marrow mesenchymal stem cel s isolated from Beagle dogs were treated with estrogen. Osteogenesis and fibroblast-related mRNA and protein expression of bone marrow mesenchymal stem cel s was determined by RT-PCR and western blot assay, respectively. RESULTS AND CONCLUSION:mRNA and protein expression of type I and III col agen in bone marrow mesenchymal stem cel s was upregulated fol owing estrogen treatment;especial y, in contrast with type III col agen, the changes of type I col agen were more obvious. Estrogen did not influence mRNA and protein expression of alkaline phosphatase. These findings suggest that estrogen promotes the differentiation of bone marrow mesenchymal stem cel s into fibroblasts, whereas does not impact the genes involved in parodontium mineralization.
RESUMEN
Objective:To observe the effects of orbital bone density on the stress distribution of implant-bone surface.Methods:The 3D finite element analysis craniofacial model with eight HU values(300 -1 0 000)was established.A force of 20 N along the im-plant axis was applied on the model.The stress values and distribution were calculated and analyzed.Results:The peak of stress val-ue and displacement discreased as HU value increased.In the range of HU value 800 -1 000 HU,the peak of stress value and dis-placement of bone interface did not significantly change with the increasing of HU value.Conclusion:Orbital bone density is an im-portant factor on orbital implant failure when HU value below 800.
RESUMEN
BACKGROUND:Stromal cel derived factor-1 is a smal molecular protein with a wide range of biological activity that can cause immune cel chemotaxis, and it also has a chemotactic effect on bone marrow stem cels and periodontal ligament cels. OBJECTIVE:To investigate the effect of stromal cel derived factor-1 with different concentrations on the proliferation of bone marrow stem cels and to probe the best concentration. METHODS:Bone marrow stem cels from beagle dogs were culturedin vitro and stimulated by different concentrations of stromal cel derived factor-1 (100, 200, 300 μg/L). MTT was used to detect the influence of stromal cel derived factor-1 on the proliferation of bone marrow stem cels so as to screen the best concentration of stromal cel derived factor-1. Then, stromal cel derived factor-1 at the best concentrations was used to intervene the bone marrow stem cels, and MTT was used again to detect the proliferation of bone marrow stem cels. RESULTS AND CONCLUSION:Stromal cel derived factor-1 at concentrations of 100, 200, 300 μg/L could promote the proliferation of bone marrow stem cels, and the effect was more notable at 200 and 300 μg/Lbut withno significant difference. Therefore, 200 μg/L was considered to be the best concentration of stromal cel derived factor-1 for intervention of bone marrow stem cels. Compared with the blank control group, 200 μg/L stromal cel derived factor-1 could significantly promote the proliferation of bone marrow stem cels. Taken together, stromal cel derived factor-1 can promote the proliferation of bone marrow stem cels, and its best concentration is 200 μg/L.
RESUMEN
Objective:To observe the effect of orbital implant load angle on the stress distribution of peri-implant surface.Methods:The 3D finite element analysis model of orbital implant with diameter of 3.75 mm and length of 6 mm was established.A force of 20 N was applied on the model at various angles.The stress distribution and displacement of the implant were recorded and analyzed.Results:Under 0°,1 0°,20°,30°,45°and 90°the maximum stress(MPa)on the peri-implant surface was 3.1 73,6.535,1 0.506,1 4.1 68, 1 8.949 and 24.755,the maximum displacement(μm)of the implant was 1 .761 ,3.654,7.665,1 1 .567,1 6.774 and 25.072,respec-tively.Conclusion:The loading angle is an important factor influencing stress and displacement of peri-implant bone.
RESUMEN
<p><b>OBJECTIVE</b>This study aims to observe the effect of orbital implant lengths on stress distribution in peri-implant surfaces.</p><p><b>METHODS</b>The three-dimensional finite element analysis models of craniofacial and orbital implants with a diameter of 3.75 mm and lengths of 3, 4, 6, and 10 mm were established. A force of 20 N was applied to the models. The stress and displacement distribution under every condition were recorded and analyzed.</p><p><b>RESULTS</b>The loading direction along the implant axis and the stress concentration on the implant root were observed. The loading direction was at a 45 degree angle relative to the implant axis, and the stress concentration was located at the implant neck and the first screw thread. The maximum stress of the 3 mm implant was significantly higher than that under the other two loading directions. The maximum displacement of the four lengths exhibited no significant change. Given the same implant length, stress, and displacement, the peak of the implant axial direction was lower than that of the 45 degree direction. The loading type was an important factor influencing the stress and displacement of peri-implant bones.</p><p><b>CONCLUSION</b>The implants of more than 4 mm length can be considered for clinical use. The implant of 3 mm length should be implanted in a region with thicker cortical bone.</p>
Asunto(s)
Fenómenos Biomecánicos , Implantes Dentales , Diseño de Prótesis Dental , Análisis del Estrés Dental , Análisis de Elementos Finitos , Implantes Orbitales , Estrés MecánicoRESUMEN
BACKGROUND:Alveolar distraction osteogenesis is an important method for treating alveolar bone atrophy, the osteogenesis process and biomechanics play a crucial role in the fol owing implantation and repair. At present, no related experimental studies are found. OBJECTIVE:To analyze the biomechanical and histological characteristics of alveolar distraction osteogenesis in a canine model. METHODS:Twelve adult mongrel canines received premolars extraction and alveoloplasty in mandible to establish an atrophy alveolar model. After 3 months, a segmental alveolar osteotomy was performed in the randomly selected unilateral atrophy alveolar and two intra-osseous distractors were placed. After a 7-days latency period, the alveolar ridge was augmented at a rate of 1.0 mm/d for 5 days. After a consolidation of 1, 2, and 3 months, the canines were sacrificed and the specimens of the distracted alveolar bone were harvested for clinical, radiographic, histological and biomechanical analysis. RESULTS AND CONCLUSION:The alveolar distractors obtained good healing with surrounding tissue. The atrophy alveolar bones were augmented for (4.80±0.50) mm and (5.12±0.47) mm by clinical and radiographic findings immediately after distraction, respectively. The bone trabeculae in the distracted chamber matured from 1 to 3 months of consolidation by histological analysis. The shearing force of alveolar distraction chamber increased from 1 to 3 months. After 3 months’ consolidation, the shearing force of distracted chamber was comparable to host bone. The histological and biomechanical property of distracted alveolar chamber is comparable to host bone after 3 months’ consolidation.
RESUMEN
Objective:To observe the effect of orbital implant shrink range on the stress distribution in bone-implant interface. Methods:The 3D finite element analysis of craniofacial and orbital implant models with the implant length of 3,4,6 and 10 mm,and with the shrink range of0.05,0.1 and 0.15 mm were established respectively.The stress in the bone-implant interface were calculat-ed and analyzed.Results:The stress increased with the increase of implant shrink range.The stress produced by the implant with 0.15 mm shrink range decreased.The stress of the implant of 10 mm was lower than that of other implants with the shrink range of 0.1 and 0.15 mm.Conclusion:The maximal implant shrink range of 0.1 mm in the model can meet the clinical requirements in orbital implant planning.
RESUMEN
<p><b>OBJECTIVE</b>To assess the effects of 1-step method of changing the buccal position of the transported bone after distraction on early bone formation.</p><p><b>METHODS</b>The custom-made bidirectional distraction devices were used. Total of 8 adult mongrel dogs were procured. The bilaterally mandible premolars were extracted. After 1 month, the complete osteotomy was performed and the devices were placed. The gradual distraction was started after 1 week latency at the rate of 1 mm per day, total 6 mm in height was achieved. The 1-step method of changing the buccal position of the transported bone was performed the day after the vertical distraction period in one side of the animals, and the other side as the controlled side. All animals were killed after a 7 days consolidation. The vascular system was stained post mortem carbon ink perfusion to assess possible damages. Quantitative evaluations of bone density were performed with dual-energy X-ray absorptiometry (DEXA), analysis of the ratio of vascular square was conducted in a computer.</p><p><b>RESULTS</b>All animals tolerated the procedures well. After vertical distraction, the tested side can be moved 3 mm in buccal direction. DEXA examination showed that the density of the distracted bone was no statistical difference in both the tested and the controlled side. Vascular damage was not observed, and there was no statistical difference in the ratio of vascular square by analyzing the histological section in computer.</p><p><b>CONCLUSION</b>In some extent, 1-step method of changing the buccal position of the transported bone after distraction can mold the regenerate bone to correct the axial displacement, without endangering early callus formation and vascularization.</p>
Asunto(s)
Animales , Perros , Densidad Ósea , Regeneración Ósea , Huesos , Mandíbula , Osteogénesis , Osteogénesis por DistracciónRESUMEN
AIM: To investigate new bone formation of alveolar augmentation with hydroxylapatite(HA)+bone morphogenetic protein(BMP)+fibrin sealant FS(HA+BMP+FS) composite.METHODS:Bone morphogenetic protein was extracted from bovine cortical bone. Hydroxylapatite particles were combined with fibrin sealant and BMP, which is of high efficient osteoinduction, forming a new complex material. The alveolar augmentation was made with this composite. The samples were investigated 3, 6,12 and 24 weeks postoperatively, with gross observation, microscope, calculation of new bone formation, tetracycline fluorescent microscope, scanning electron microscope, backscattered electron image and X-ray energy analysis.RESULTS: 1. In experimental group, weave bone had been seen since 3 weeks postoperatively and more new bone 6 weeks postoperatively; remolded bones united and distributed to all spaces of HA particles 12～24 weeks postoperatively. In control group, no new bone appeared 3 weeks postoperatively, only some HA particles contacted base bone 6 weeks postoperatively, a little of new bone grew into HA spaces 12～24 weeks postoperatively. 2. New bone directly incorporated with HA. The quantity of calcium and phosphate are similar to HA and base bone. CONCLUSION:This composite in alveolar augmentation obviously promotes incorporation HA with base bone, speeds formation of new bone and adds amount of new bone, reconstructing a bony alveolar ridge.