The effect of scrotal versus inguinal orchiopexy on the testicular function of children with clinically palpable, inguinal undescended testis: a randomized controlled trial / 亚洲男科学杂志(英文版)

To compare the impact of the scrotal vs inguinal orchidopexy approach on the testicular function of infants with cryptorchidism, a randomized controlled trial was conducted involving boys who were 6-12 months old at surgery and were diagnosed with clinically palpable, inguinal undescended testis. Between June 2021 and December 2021, these boys at Fujian Maternity and Child Health Hospital (Fuzhou, China) and Fujian Children's Hospital (Fuzhou, China) were enrolled. Block randomization with a 1:1 allocation ratio was employed. The primary outcome was testicular function assessed by testicular volume, serum testosterone, anti-Müllerian hormone (AMH), and inhibin B (InhB) levels. Secondary outcomes included operative time, amount of intraoperative bleeding, and postoperative complications. Among 577 screened patients, 100 (17.3%) were considered eligible and enrolled in the study. Of the 100 children who completed the 1-year follow-up, 50 underwent scrotal orchidopexy and 50 underwent inguinal orchidopexy. The testicular volume, serum testosterone, AMH, and InhB levels in both groups increased markedly after surgery (all P < 0.05), but there were no apparent differences between groups at 6 months and 12 months after operation (all P > 0.05). No differences between the scrotal and inguinal groups were noted regarding the operative time ( P = 0.987) and amount of intraoperative bleeding ( P = 0.746). The overall complication rate (2.0%) of the scrotal group was slightly lower than that of the inguinal group (8.0%), although this difference was not statistically significant ( P > 0.05). Both scrotal and inguinal orchiopexy exerted protective effects on testicular function in children with cryptorchidism, with similar operative status and postoperative complications. Scrotal orchiopexy is an effective alternative to inguinal orchiopexy in children with cryptorchidism.

A modified fixation technique for the treatment of buried penis in children / 亚洲男科学杂志(英文版)

For many years, surgical treatment of buried penis in children has been researched by several scholars, and numerous methods exist. This study aimed to explore the clinical effect of a modified fixation technique in treating buried penis in children. Clinical data of 94 patients with buried penis who were treated using the modified penile fixation technique from March 2017 to February 2019 in Fujian Maternity and Child Health Hospital (Fuzhou, China) were retrospectively collected, compared, and analyzed. Clinical data of 107 patients with buried penis who were treated using traditional penile fixation technique from February 2014 to February 2017 were chosen for comparison. The results showed that at 6 months and 12 months after surgery, the penile lengths in the modified penile fixation group were longer than those in the traditional penile fixation group (both P < 0.05). The incidence of postoperative skin contracture and penile retraction in the modified penile fixation group was less than that in the traditional penile fixation group (P = 0.034 and P = 0.012, respectively). When the two groups were compared in terms of parents' satisfaction scores, the scores for penile size, penile morphology, and voiding status in the modified penile fixation group were higher than those in the traditional penile fixation group at 2-week, 6-month, and 12-month follow-ups after surgery (all P < 0.05). We concluded that the modified penile fixation technique could effectively reduce the incidence of skin contracture and penile retraction and improve the penile length and satisfaction of patients' parents.

Integrative molecular characterization of Chinese prostate cancer specimens / 亚洲男科学杂志(英文版)

Prostate cancer (PCa) exhibits epidemiological and molecular heterogeneity. Despite extensive studies of its phenotypic and genetic properties in Western populations, its molecular basis is not clear in Chinese patients. To determine critical molecular characteristics and explore correlations between genomic markers and clinical parameters in Chinese populations, we applied an integrative genetic/transcriptomic assay that combines targeted next-generation sequencing and quantitative real-time PCR (qRT-PCR) on samples from 46 Chinese patients with PCa. Lysine (K)-specific methyltransferase 2D (KMT2D), zinc finger homeobox 3 (ZFHX3), A-kinase anchoring protein 9 (AKAP9), and GLI family zinc finger 1 (GLI1) were frequently mutated in our cohort. Moreover, a clinicopathological analysis showed that RB transcriptional corepressor 1 (RB1) deletion was common in patients with a high risk of disease progression. Remarkably, four genomic events, MYC proto-oncogene (MYC) amplification, RB1 deletion, APC regulator of WNT signaling pathway (APC) mutation or deletion, and cyclin-dependent kinase 12 (CDK12) mutation, were correlated with poor disease-free survival. In addition, a close link between KMT2D expression and the androgen receptor (AR) signaling pathway was observed both in our cohort and in The Cancer Genome Atlas Prostate Adenocarcinoma (TCGA-PRAD) data. In summary, our results demonstrate the feasibility and benefits of integrative molecular characterization of PCa samples in disease pathology research and personalized medicine.

Testicular descent and fixation through a scrotal stria incision for the treatment of palpable cryptorchidism in children aged <3 years: 10-year experience with 1034 cases / 亚洲男科学杂志(英文版)

This study was performed to summarize our clinical experience with testicular descent and fixation through a scrotal stria incision for the treatment of palpable cryptorchidism in children. This study included 1034 children with palpable cryptorchidism from March 2009 to March 2019. A scrotal stria incision was used to perform testicular descent and fixation. Overall, 1020 children successfully underwent surgical testicular descent and fixation through a scrotal stria incision, and 14 patients underwent conversion to inguinal incision surgery. All patients were discharged 1-2 days after the operation. During hospitalization and follow-up, 55 patients developed complications, including 10 patients with testicular retraction, 7 with poor healing of the incision, and 38 with a scrotal hematoma. No patients developed testicular atrophy, an indirect inguinal hernia, or a hydrocoele. Testicular descent and fixation through a scrotal stria incision for the treatment of palpable cryptorchidism in children is safe and feasible in well-selected cases. This method has the advantages of no scarring and a good cosmetic effect.

Three-dimensional spatial measurement versus conventional CT planning in laparoscopic partial nephrectomy for renal tumors / 南方医科大学学报

<p><b>OBJECTIVE</b>To analyze the advantages of spatial measurement of anatomical parameters in a 3D model in surgical planning for laparoscopic partial nephrectomy (LPN).</p><p><b>METHODS</b>From February, 2016 to October, 2017, 37 patients diagnosed with T1 renal mass underwent LPN based on 3D reconstruction after enhanced CT scanning using the Uromedix-3D system (group A), and another 38 patients received LPN with conventional CT planning (group B). The anatomical parameters were measured in the reconstructed 3D model and the demographic data, surgical outcome and postoperative data were compared between the two groups.</p><p><b>RESULTS</b>In group A, the average time for 3D model reconstruction was (29.3∓9.7) min; the length, width and depth of the renal defect in 3D model were 3.2∓1.1 cm, 2.6∓0.9 cm and 1.7∓0.7 cm, respectively; The distance of the tumor from the collecting system was 3.8∓2.2 mm; The mean R.E.N.A.L score of the patients was 7∓1.5, and 3 patients had accessory renal artery and 2 had early branching of the renal artery. LPNs were completed via the retroperitoneal approach in all the 75 patients without conversion to open or total nephrectomy. Group A and group B showed significant differences in warm ischemic time (26.7∓6.4 vs 31.9∓7.0 min), tumor-excision time (8.4∓2.6 vs 10.4∓2.8 min), renal defect suture time (18.3∓3.9 vs 21.5∓3.4 min), 24-h volume of retroperitoneal drainage (88.6∓40.2 vs 134.3∓58.3 mL) and 48-h volume of retroperitoneal drainage (127.9∓54.5 vs 198.1∓86.3 mL), but not in the demographic data, operation time, intraoperative blood loss or postoperative hospital stay.</p><p><b>CONCLUSIONS</b>3D reconstruction of the renal masses can be completed efficiently and accurately using this system. Compared with conventional CT-based measurement, 3D spatial measurement of the anatomical structures helps to increase the precision in the performance of LPN and reduce the warm ischemia time.</p>

Evaluation of target-enrichment accompanied by next-generation sequencing for detection of four pathogens in bloodstream infections / 军事医学

Objective To establish an Ampliseq method that combines target-enrichment and the next-generation sequencing for simultaneous detection of Staphylococcus aureus, S.epidermidis, Klebsiella pneumoniae and Listeria monocytogenes in order to provide a fast and accurate means to detect pathogens in bloodstream infections.Methods A method to evaluate the LOD,specificity and sensitivity by constructing simulated samples spiked in known pathogens was established.Results and Conclusion Target-enrichment Ampliseq showed good sensitivity and specificity,and the limit of detection(LOD)was as low as 101CFU/ml.The sensitivity was 95.38%,the specificity was 95.45%and the Kappa value was between 0.839 -1.000.This method can detect S.aureus,S.epidermidis,K.pneumoniae and L.monocytogenes simultaneously in one reaction within 15 hours.

Finite element modeling of material property assignment based on CT gray value and its application in simulation of osteotomy for deformities / 南方医科大学学报

<p><b>OBJECTIVE</b>To explore a new method for finite element modeling to achieve material property assignment based on in situ CT gray value in simulated osteotomies for deformities.</p><p><b>METHODS</b>A CT scan dataset of the lower limb of a patient with extorsion deformity was obtained for three-dimensional reconstruction using Mimics software and preparing a solid model. In the CAD software, the parameters for osteotomy simulation were defined including the navigation axis, rotation angle and reference plane. The tibia model was imported to the FEA pre-processing software for meshing procedure and then exported to Mimics. All the segments of the tibia meshed model were assigned uneven material properties based on the relationship between CT gray values and material properties in the Mimics software. Finally, all the segments of the tibia model, reference axis and reference plane were assembled in the pre-processing software to form a full finite element model of a corrected tibia, which was submitted to resolver for biomechanical analysis.</p><p><b>RESULTS</b>The tibia model established using our modeling method had inhomogeneous material properties based on CT gray values, and was available for finite element analysis for the simulation of osteotomy.</p><p><b>CONCLUSIONS</b>The proposed finite element modeling method, which retains the accuracy of the material property assignment based on CT gray value, can solve the reposition problem commonly seen in modeling via the routine method of property assignment and provides an efficient, flexible and accurate computational biomechanical analysis method for orthopedic surgery.</p>

Simultaneous determination of six components in water extract and alcohol precipitation liquid in Astragali Radix by HPLC-UV-ELSD / 中国中药杂志

A HPLC-UV-ELSD method was established for simultaneous determination of six components in two intermediates of Shenqi Fuzheng injection (SFI) and the feasibility of establishing quantitative analysis of multi-components by single marker (QAMS) methods on different detectors was further explored. Calycosin-7-O-β-D-glucoside and astragloside Ⅳ were selected as internal reference substances for respectively flavonoids and saponins, and relative correlation factors (RCF) of formononetin-7-O-β-D-glucoside, 9, 10-dimethoxypterocarpan-3-O-β-D-glucopyranoside, 2'-dihydroxy-3', 4'-dimethoxyisoflavan-7-O-β-D-glucopyranoside and astragloside Ⅱ were calculated. Eventually, quantitative results of the 14 samples were compared between QAMS and external standard method. The sample concentrations calculated by QAMS were similar with concentrations calculated by external standard method, and the absolute values of relative deviations were generally less than 5% according to the UV detection of flavonoids. On the basis of ELSD detection for saponins, however, the absolute values of relative deviation of the two methods ranged from 0.48% to 23.17%. The QAMS method built on ultraviolet (UV) detectors was stable and can be used as a substitute method to reduce the consumption of standard compounds; meanwhile, the accuracy of QAMS method built on evaporative light scattering detector (ELSD) was inferior to that of external standard method, and the working principle of ELSD and feasible concentration range remain to be further studied.

Clincial effect of 3D printing-assisted minimal invasive surgery through a small incision lateral to the rectus abdominis for pelvic fracture / 南方医科大学学报

<p><b>OBJECTIVE</b>To evaluate the clinical effect of 3D printing-assisted minimal invasive surgery on pelvic fracture by plate internal fixation through a small incision lateral to the rectus abdominis.</p><p><b>METHODS</b>This retrospective study was conducted among 50 patients with pelvic fracture undergoing anteromedial plate internal fixation between September, 2013 and June, 2015. Thin-layer computed tomography scan data of the patients were input into Mimics software in DICOM format for 3D editing and virtual surgery before the operation. The pelvic model was created by 3D printing. Simulated operation was performed to design the optimum location of the plate screw, prelflex of the plate, screw length measurement and screwing approach. Diaplasis and internal fixation were performed through the extraperitoneal space with a small incision lateral to the rectus abdominis. Matta standard was employed for diaplasis evaluation, and Majeed assessment was used for function evaluation 6 months after the operation.</p><p><b>RESULTS</b>According to Matta standard, excellent and good diaplases were achieved in 96% of the cases, as compared with 94% according to Majeed assessment. Radiographic examination showed a good consistency between the internal fixation and simulated operation. No screw entry into the hip joint cavity occurred in these cases. The mean operation time was 127 min in these cases with a mean intraoperative blood loss of 728 mL and a mean incision length of 8.4 cm. Based on the postoperative VAS score, 12 patients reported severe pain, 28 reported moderate pain and 10 reported mild pain. All the patients were advised for early functional exercise after the operation and clinical healing was achieved in a mean of 8 weeks.</p><p><b>CONCLUSIONS</b>3D printing with simulated operation can improve the accuracy and safety of the operation. Preoperative simulation of plate preflex and screw length measurement can shorten the operation time. A small incision lateral to the rectus abdominis allows minimally invasive operation for pelvic fractures.</p>

Detection of agent "zhuanggenling" and investigation of utilization of plant growth retardants in traditional Chinese medicine cultivation / 中国中药杂志

Plant growth retardant as one of plant growth regulator can inhibit the cell division, elongation and growth rate in shoot apical meristem (SAM), which can be reversed by gibberellin regulate the product of photosynthesis transfer to the root and rhizome part. As commonly used plant growth retardant, paclobutrazol, uniconazole, chlorocholine chloride, mepiquat chloride, choline chloride and daminozide are used to promote the growth of root and rhizome, call as "zhuanggenling", "pengdasu", "pengdaji" etc. Single or recombination of plant growth regulator is registered as pesticide, and called as pesticide "zhuanggenling" in this paper. Growth regulator which registered as a foliar fertilizer or fertilization was called agricultural fertilizer "zhuanggenling" in this paper. The author investigate the usage of "zhuanggenling" in the root and rhizome of medicinal plants cultivation from 2012 to 2014 in Sichuan province, Huangyuan town, Mianyang (Ophiopogonis Radix); Pengzhou Aoping town (Chuanxiong Rhizoma); Pengshan Xiejia town (Alismatis Rhizoma); Jiangyou Taiping town and Zhangming town (Aconiti Lateralis Radix Praeparata); Yunnan Wenshan (Notoginseng Radix et Rhizoma); Henan province, Wuzhidafeng Town (Rehmanniae Radix, Achyranthis Bidentatae Radix, Dioscoreae Rhizoma); Gansu Min county (Codonopsis Radix, Angelicae Sinensis Radix); Gansu Li county (Rhei Radix et Rhizoma). The result showed that "zhuanggenling" were applied in the most medicinal plant cultivation except Rhei Radix et Rhizoma. It has been applied widespreadly in Ophiopogonis Radix, Alismatis Rhizoma, Achyranthis Bidentatae Radix, Codonopsis Radix; Rehmanniae Radix, commonly in Angelicae Sinensis Radix application, and occasionally in Chuanxiong Rhizoma, Aconiti Lateralis Radix Praeparata, Notoginseng Radix et Rhizoma and Dioscoreae Rhizoma. In 53 collected sample from plantation areas, fifteen (28%) were pesticide "zhuanggenling", thirty-eight (72%) were pesticide "zhuanggenling". UPLC analysis results showed that 38 farmers fertilizer "zhuanggenling" content of 6 kinds of plant growth retardant. It is regarded that fertilizer "zhuanggenling" was dominant in medicinal plant cultivation, and that the plant growth retardant is added widespreadly in farm fertilizer "zhuanggenling". All evidence proves conclusively that "zhuanggenling" have been used in the proper way, whereas some others have been misused or even abused in the use regarding to type, number, use frequency. The root or rhizoma are increased to 20%-200%. But there is lack of evaluation to appraise the quality of medicinal materials from the aspects of research or industry. "zhuanggenling" has become a important Chemical control material besides fertilizer, insecticidal sterilization of pesticide

A new bisabolane-type sesquiterpenoid from Coreopsis tinctoria / 中国中药杂志

To study the chemical constituents of the inflorescences of Coreopsis tinctoria from Xinjiang, isolation and purification of constituents were carried out by column chromatography on macroporous resin (D101) , MCI gel, MDS gel, silica gel, Sephadex LH-20 and semi-preparative HPLC. The structures of the compounds were identified by physicchemical properties and spectral data analysis. Fourteen compounds were isolated and identified as coretinterpenoid A (1), coretinphenol (2), quercetin (3), quercetin-3-O-β-glucopyranoside (4), luteolin (5), taxifolin (6), 7, 3', 5'-trihydroxyflavanone (7), isookanin (8), isookanin-7-O-β-D-glucopyranoside (9), 5, 7, 3', 5'-tetrahydroxyflavanone-7-O-β-D-glucopyranoside (10), butein (11), okanin (12), sulfuretin (13), and linocinnamarin (14). Compound 1 was a new isabolane-type sesquiterpenoid and compounds 4, 10 and 13 were isolated from this plant for the first time.

Design space approach to optimize first ethanol precipitation process of Dangshen / 中国中药杂志

Design space approach is applied in this study to enhance the robustness of first ethanol precipitation process of Codonopsis Radix (Dangshen) by optimizing parameters. Total flavonoid recovery, dry matter removal, and pigment removal were defined as the process critical quality attributes (CQAs). Plackett-Burman designed experiments were carried out to find the critical process parameters (CPPs). Dry matter content of concentrated extract (DMCE), mass ratio of ethanol to concentrated extract (E/C ratio) and concentration of ethanol (CEA) were identified as the CPPs. Box-Behnken designed experiments were performed to establish the quantitative models between CPPs and CQAs. Probability based design space was obtained and verified using Monte-Carlo simulation method. According to the verification results, the robustness of first ethanol precipitation process of Dangshen can be guaranteed by operating within the design space parameters. Recommended normal operation space are as follows: dry matter content of concentrated extract of 45.0% - 48.0%, E/C ratio of 2.48-2.80 g x g(-1), and the concentration of ethanol of 92.0% - 92.7%.

Anticancer effect of total annonaceous acetogenins on hepatocarcinoma / 中国结合医学杂志

<p><b>OBJECTIVE</b>To confirm the anticancer effect of total annonaceous acetogenins (TAAs) abstracted from Annona squamosa Linn. on human hepatocarcinoma.</p><p><b>METHODS</b>The inhibitory effect of TAAs was demonstrated in H22-bearing mice. The potency of TAAs was confirmed as its 50% inhibiting concentration (IC50) on Bel-7402 cell under Sulfur Rhodamine B staining. Both underlying mechanisms were explored as cellular apoptosis and cell cycle under flow cytometry. Mitochondrial and recipient apoptotic pathways were differentiated as mitochondrial membrane potential under flow cytometry and caspases activities under fluorescence analysis.</p><p><b>RESULTS</b>The inhibitory rate of TAAs in mice was 50.98% at 4 mg/kg dose. The IC50 of TAAs on Bel-7402 was 20.06 µg/mL (15.13-26.61µg/mL). Effective mechanisms of TAAs were confirmed as both of arresting cell cycle at G1 phase and inducing apoptosis dose- and time-dependently. Mitochondrial and recipient pathways involved in apoptotic actions of TAAs.</p><p><b>CONCLUSION</b>TAAs is effective for hepatocarcinoma, via inhibiting proliferation and inducing apoptosis.</p>

The compounds from n-butanol fraction of Alpinia oxyphylla / 药学学报

Nine compounds were isolated from the n-butanol fraction of 95% ethanol extract of the fruit of Alpinia oxyphylla Miq. with a combination of various chromatographic approaches, including MDS resin, silica gel, reverse phase C18 and preparative HPLC. On the basis of spectroscopic data analysis, they were elucidated as (1R, 4R, 10R)-1β, 4α-dihydroxy-11, 12, 13-trinor-5, 6-eudesmen-7-one (1), 1β, 4β-dihydroxy-11, 12, 13-trinor-8, 9-eudesmen-7-one (2), oxyphyllenone A (3), oxyphyllenone B (4), rhamnocitrin (5), staphylionoside D (6), benzyl-1-O-β-D-glucopyranoside (7), 2-O-β-D-glucopyranosyl-(1S)-phenylethylene glycol (8), and (S)-1-phenylethyl-β-D-glucopyranoside (9). Among them, compound 1 is a new sesquiterpene, named as oxyphyllenone C; compounds 8 and 9 are new natural products; compounds 2 and 6 were isolated from the genus Alpinia for the first time, and compound 7 was isolated from A. oxyphylla for the first time.

Randomized, double-blind, multi-center, positive parallel control clinical trial of compound Wuzhigan capsules on anemopyretic cold / 中国中药杂志

Compound Wuzhigan capsules is a compound preparation composed of Wuzhigan, Shidagonglao, Gangmei, Shanzhima. A Randomized, double-blind, multi-center, positive parallel control designed to evaluate the clinical efficacy and safety of compound Wuzhigan capsules on anemopyretic cold. One hundred and twenty anemopyretic cold patients were given compound Wuzhigan capsules (test group), 2 capsules one time, three times a day, 119 patients were given compound Wuzhigan tablets (control group) ,4 tablets one time, three times a day; three days of treatment The study showed, the markedly effective rate and total effective rate respectively were 63. 3% and 80% of the test group. For the control group, the markedly effective rate and total effective rate respectively were 72. 5% and 80. 7%. The difference was not statistically significant. Compound Wuzhigan capsules can reduce the dosage, and get better patient compliance.

Application of solid-phase extraction column for determination of matrine and oxymatrine in Sophora flavescens / 中国中药杂志

A Cleanert Alumina-N-SPE column (0.5 g/6 mL) chromatograpy with 5 mL of chloroform-methanol (7: 3) as eluent, instead of aluminum oxide column (100-200 mesh, 5 g, 1 cm) chromatograpy eluted successively with chloroform and the chloroform-methanol (7:3) (20 mL each), was applied to enrich matrine and oxymatrine in Sophora flavescens. Also, the optimization of the HPLC determination conditions with acetonitrile-ethanol absolute-3% phosphoric acid solution (84: 6: 10) as mobile phase, instead of acetonitrile-ethanol absolute -3% Phosphoric acid solution (80: 10: 10) recorded in Chinese Pharmacopoeia 2010 Edition, was more suitable for determination of matrine and oxymatrine in S. flavescens. This method has advantage of reducing sample handling time and solvent volume and increasing the accuracy and feasibility, which can simplify the procedure for determination of matrine and oxymatrine in S. flavescens.

Study on content of two sesquiterpenes in Alpinia oxyphylla / 中国中药杂志

<p><b>OBJECTIVE</b>To develop an HPLC method for determining oxyphyllenodiol A (1) and teuhetenone A (2) contained in Alpinia oxyphylla and to compare the contents of the two components contained in medicinal materials and prepared herbal medicines in pieces sold in the market and different fractions.</p><p><b>METHOD</b>HPLC and Waters sunfire C18 column (4. 6 mm x 250 mm, 5 microm) were adopted for gradient elute with the mobile phase of acetonitrile and water. The flow rate was 1.0 mL x min(-1) and the detection wavelength was 250 nm.</p><p><b>RESULT</b>1 and 2 showed a good linear relationship within the range of 0.1296 - 0.8640 microg and 0.1635 - 1.0900 microg respectively, with the average recoveries of 99.08% and 97.80%. Their content ranges were 0.0059% - 0.0149% and 0.0080% - 0.0164% in different samples. The mean value of 1 and 2 were 0.0085% and 0.0104% in the whole fruits, and 0.0137% and 0.0157% in the seeds. They were undetected in the nutshells.</p><p><b>CONCLUSION</b>The method is so precise, accurate and highly reproducible that it can be used to determine the contents of oxyphyllenodiol A and teuhetenone A in A. oxyphylla. The contents of the two components are mainly extracted from the seeds, with certain difference among different samples. There are a higher contents and no significant difference in the salted and raw seeds.</p>

Clinical features and therapeutic measures of diffuse brain swelling in severe craniocerebral trauma / 南方医科大学学报

<p><b>OBJECTIVE</b>To investigate the clinical features of diffuse brain swelling following severe craniocerebral trauma and explore the optimized treatment protocols.</p><p><b>METHODS</b>A total of 134 cases of craniocerebral trauma with diffuse brain swelling receiving surgical treatment (n=76) and conservative therapy (n=580) were analyzed retrospectively for the clinical outcomes.</p><p><b>RESULTS</b>Of the 76 surgical patients, 55 survived with a survival rate of 72.4% as compared with the rate of (75.9%, 43/58) in the conservative therapy group.</p><p><b>CONCLUSION</b>Early implementation of comprehensive measures is of critical importance in the management of severe craniocerebral trauma with diffuse brain swelling.</p>

Three-dimensional reconstruction and anatomic variation of the portal vein based on 64-slice spiral CT data / 南方医科大学学报

<p><b>OBJECTIVE</b>To investigate the three-dimensional reconstruction methods of the portal vein using 64-slice spiral CT data and the anatomical variation of the portal vein.</p><p><b>METHODS</b>Three-dimensional reconstruction of the portal vein was performed using Mimics software based on the 64-slice spiral CT data of 64 cases. Each model of the portal vein and its branches was evaluated according to the presentation rate, depiction quality and anatomic variation.</p><p><b>RESULTS</b>The reconstructed model showed a depiction rates of 100% for the 4-grade branches of the portal vein. The stem of the portal vein and the left and right branches of the level III or above were all displayed, but in 2 cases the superior mesenteric vein and in 1 case the spleen vein was displayed only to the level IV. Of the 64 cases, 50 (78.1%) had normal portal vein and 14 (21.9%) showed anatomical variations.</p><p><b>CONCLUSION</b>The 3D model vividly mimics the anatomic variations of the portal vein to provide valuable information for surgical plans.</p>

Three-dimensional design of surgery for mandibular retrusion / 南方医科大学学报

<p><b>OBJECTIVE</b>To explore the feasibility of surgical design for mandibular retrusion using three-dimensional software.</p><p><b>METHODS</b>Three-dimensional reconstruction was performed by Mimics software based on the preoperative CT data. The model of the maxillofacial region was imported into Rapidform software for measuring the associated parameters and Geomagic software for simulation of osteotomy. The reliability of the virtual operation was validated during the surgery.</p><p><b>RESULTS</b>The model of mandibular retrusion was reconstructed and successfully used to simulate the surgery. The simulation result was applied in subsequent actual surgery and good surgical outcomes were achieved.</p><p><b>CONCLUSION</b>The three-dimensional software can be used to simulate the surgery for mandibular retrusion and improve the predictability and accuracy of the surgery.</p>