RESUMEN
Objective To develop a biological canulated screw and evaluate its mechanical properties, so as to provide theoretical basis for the bio therapy of fracture with enrichment technique of bone marrow stem cells, which could be diffused through the canula, particularly for promoting bone union of femoral neck fracture and preventing avascular necrosis of femoral head. Methods TC4 titanium alloyed canulated cancellous screw (7.3 mm in diameter) commonly used for internal fixation of femoral neck fracture was improved by designing an end sealing plug and side holes in a 900 mm-long canulated screw. The side holes were arranged along the axis of screw, and the first side hole was 20 mm away from the screw tip. The distance between each side hole was 10 mm, and the number of side holes ranged from 0 to 6. The screws without holes were tested as control, and the rest were divided into two groups, i.e., group A: force direction parallel to the side hole, group B: force direction perpendicular to the side hole. Three point bending test on the screw was conducted by using Instron material testing machine, so as to study the relationship between the mechanical strength of the screw and the number of side holes, and the loading direction. Results (1) When the force direction was parallel to the side hole, which was confined within 0, 1 or 2, the bending deformation of the screw reached 3 mm, and no differences were found in the maximum loads and elastic modulus of the screw. However, when the number of side holes was increased to 3 or more, a significant reduction in the maximum load and elastic modulus of the screw was found (P＜0.05). (2) When the force direction was perpendicular to the side hole, which was confined within 0,1 or 2, and the bending deformation of the screw reached 3 mm, no significant differences were found in the maximum loads of the screw. While no significant difference was found in the elastic modulus of the screw when the side hole was 0, 1, 2 and 3. With an increase in the number of side holes, the maximum loads (≧ 3 side holes) and elastic modulus (≧ 4 side holes) were significantly reduced (P＜0.05). (3) When the force direction was perpendicular to the side hole and the number of side holes was 3 or more, the maximum loads and elastic modulus of the screw were all significantly higher than the screw with the same number of side hole under force direction parallel to the side hole. Conclusions (1) For achieving better mechanical properties of the screw, the number of side holes in titanium alloyed canulated cancellous screw (7.3 mm in diameter) should be within 2; (2) If the number of side holes was equal or over 3, screws under force direction perpendicular to the side hole could provide better mechanical properties than screws under force direction parallel to the side hole. This study may provide some theoretical evidence and support for future clinical development and practice of the biological canulated screw.
RESUMEN
<p><b>OBJECTIVE</b>To explorer the effectiveness of enriched bone marrow stem cells technique for lumbar fusion.</p><p><b>METHODS</b>With the randomization and control principles, 2 graft materials [Enrichment bone marrow mesenchymal stem cells hybridized with beta-tri calcium phosphate (composite graft group), autologous iliac crest bone graft (autograft group)] were compared in posterior lumbar fusion procedures. 56 patients with degenerative disc disease, lumbar instability or spinal stenosis, were included. The volume of cells suspension in pre- and post-enrichment and the number of nucleated cells (NCs) were identified. The number of osteoprogenitor cells was estimated by counting the colony-forming units which express alkaline phosphatase (CFUs/ALP+). Then the efficiency of the enrichment was evaluated. Clinical follow-up with roentgenogram and Oswestry scale scores was performed for outcome evaluation.</p><p><b>RESULTS</b>(249 +/- 31) ml bone marrow per patient from bilateral iliac crests was aspirated peri-operatively. About (43 +/- 11) ml enriched bone marrow was collected. The number of NCs was concentrated from (15.9 +/- 3.3) x 10(6)/ml to (44.1 +/- 10.8) x 10(6)/ml, CFUs/ALP+ was significantly increased from (118 +/- 86)/ml to(486 +/- 305)/ml. The follow-up was about (26.3 +/- 7.5) months. There was no significant differences in age, gender, disease and fusion segments between the two groups. The fusion rate was 93.3% and 96.2% for composite graft group and autograft group, respectively (chi2 = 0.2146, P = 0.6432). There was no difference in operation time between the two group (t = 0.5243, P = 0.6022), but blood loss in composite graft group was more than that in autograft group (t = 6.4664, P < 0.01). Cell salvage for auto-transfusion could transfuse back half of the blood loss during operation. No hematoma or chronic soreness in the bone marrow donor sites of composite graft group occurred, but a little exudation or moderate swelling in the wound happened in 4 cases which disappeared under medical treatment. Meanwhile, 15.4% patients had hematoma in the iliac bone donor site and 26.9% patients had chronic soreness, but no case had wound problem in autograft group. As for Oswestry scale scores, there was no significant difference between the two groups.</p><p><b>CONCLUSIONS</b>The enrichment technique of autologous bone marrow stem cells can greatly increase the concentration of MSCs. It is a rapid and safe method used peri-operatively. The composite material of enriched MSCs and porous beta-TCP is a good bone substitute in posterior spinal fusion.</p>