Effects of different crosslinking treatments on the properties of decellularized small intestinal submucosa porous scaffolds / 北京大学学报(医学版)

OBJECTIVE@#To compare the effects of three different crosslinkers on the biocompatibility, physical and chemical properties of decellularized small intestinal submucosa (SIS) porous scaffolds.@*METHODS@#The SIS porous scaffolds were prepared by freeze-drying method and randomly divided into three groups, then crosslinked by glutaraldehyde (GA), 1-ethyl-3-(3-dimethylaminopropyl) carbodi-imide (EDC) and procyanidine (PA) respectively. To evaluate the physicochemical property of each sample in different groups, the following experiments were conducted. Macroscopic morphologies were observed and recorded. Microscopic morphologies of the scaffolds were observed using field emission scanning electron microscope (FESEM) and representative images were selected. Computer software (ImageJ) was used to calculate the pore size and porosity. The degree of crosslinking was determined by ninhydrin experiment. Collagenase degradation experiment was performed to assess the resistance of SIS scaffolds to enzyme degradation. To evaluate the mechanical properties, universal mechanical testing machine was used to determine the stress-strain curve and compression strength was calculated. Human bone marrow mesenchymal cells (hBMSCs) were cultured on the scaffolds after which cytotoxicity and cell proliferation were assessed.@*RESULTS@#All the scaffolds remained intact after different crosslinking treatments. The FESEM images showed uniformed interconnected micro structures of scaffolds in different groups. The pore size of EDC group[(161.90±13.44) μm] was significantly higher than GA group [(149.50±14.65) μm] and PA group[(140.10±12.06) μm] (P < 0.05). The porosity of PA group (79.62%±1.14%) was significantly lower than EDC group (85.11%±1.71%) and GA group (84.83%±1.89%) (P < 0.05). PA group showed the highest degree of crosslinking whereas the lowest swelling ratio. There was a significant difference in the swelling ratio of the three groups (P < 0.05). Regarding to the collagenase degradation experiment, the scaffolds in PA group showed a significantly lower weight loss rate than the other groups after 7 days degradation. The weight loss rates of GA group were significantly higher than those of the other groups on day 15, whereas the PA group had the lowest rate after 10 days and 15 days degradation. PA group showed better mechanical properties than the other two groups. More living cells could be seen in PA and EDC groups after live/dead cell staining. Additionally, the proliferation rate of hBMCSs was faster in PA and EDC groups than in GA group.@*CONCLUSION@#The scaffolds gained satisfying degree of crosslinking after three different crosslinking treatments. The samples after PA and EDC treatment had better physicochemical properties and biocompatibility compared with GA treatment. Crosslinking can be used as a promising and applicable method in the modification of SIS scaffolds.

Effects of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide on adhesion of posts in teeth obturated with different sealers

Abstract The aim of this study was to evaluate the effect of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) on bond strength of fiberglass posts in root canals obturated with different endodontic sealers. Seventy-eight mandibular premolars were obturated with three sealers (n=26): Endofill (END), AH Plus (AHP), and Endosequence BC Sealer (EBS). After preparation of the post space, two subgroups were formed according to the cementation of the posts (n=13): with EDC (EDC), and without EDC (control - CON). The specimens were submitted to a pull-out test, failure mode classification, and root canal surface evaluation by scanning electron microscopy after post displacement. Regarding the bond strength, a significant difference between the EDC and CON subgroups occurred only in the END (p=0.001). No difference was detected among the CON subgroups (p=0.339). However, among the EDC subgroups, AHP presented significantly higher values (END versus AHP: p=0.001; AHP versus EBS: p=0.016). Upon classification of failure modes, score 1 (≥ 50% of cement) was the most commonly observed, except for the END + EDC. Remains of endodontic sealers and resin cements were found in the cervical third, but without statistical difference (p=0.269), while in the middle third, difference occurred (p=0.004). In conclusion, EDC decreases bond strength when associated with END sealer, without changing the failure mode between the resin cement and fiberglass post. The best performance was observed when EDC was combined with AHP sealer.

Resumo O objetivo deste estudo foi avaliar o efeito da 1-etil-3- (3-dimetilaminopropil) carbodiimida (EDC) na resistência de união de pinos de fibra de vidro em canais radiculares obturados com diferentes cimentos endodônticos. Setenta e oito pré-molares inferiores foram obturados com três cimentos endodônticos (n=26): Endofill (END), AH Plus (AHP) e Endosequence BC Sealer (EBS). Após o preparo do espaço para pino, dois subgrupos formaram-se conforme a cimentação dos pinos (n=13): com EDC e sem EDC (controle - CON). Os espécimes foram submetidos ao teste pull-out, classificação do modo de falha e avaliação da superfície do canal radicular por microscopia eletrônica de varredura após o deslocamento. Quanto à força de resistência de união, uma diferença estatisticamente significativa ocorreu entre os subgrupos EDC e CON apenas no END (p=0,001). Não foi detectada diferença entre os subgrupos CON (p=0,339). Contudo, no subgrupo EDC, o AHP apresentou maiores valores (END versus AHP: p=0,001; AHP versus EBS: p=0,016). Acerca da classificação dos modos de falha, o escore 1 (≥50% de cimento) foi o mais comumente observado, exceto para END + EDC. Restos de cimentos endodônticos e cimentos resinosos foram encontrados no terço cervical, mas sem diferença estatística (p=0,269), enquanto no terço médio, houve diferença (p=0,004). Em conclusão, o EDC diminui a resistência de união quando associado ao cimento END, sem alterar o modo de falha entre o cimento resinoso e o pino de fibra de vidro. O melhor desempenho foi observado quanto o EDC foi usado com o cimento AHP.

Influence of EDC ethanol solution on dentin shear bond strength with a self-etch adhesive system / 北京大学学报(医学版)

Objective:To evaluate the bonding ability of one representative self-etch adhesive system by applying the micro-shear bond strength test method with different concentrations of carbodiimide [1-ethyl3-(3-dimethylaminopropyl) carbodiimide,EDC] ethanol solution pretreatment.Methods:Extracted sound human third molars were collected from patients ranging 18 to 40 years.In the study,80 molars were first sectioned to prepare a flat middle coronal dentin surface and then were randomly divided into 5 groups (n =16) according to without/with different surface treatments [blank control;80％ (volume fraction) ethanol control;EDC ethanol solution of three concentrations (0.01 mol/L,0.3 mol/L and 0.5 mol/L)].Each specimen underwent a micro-shear bond strength test and failure mode observation.The data collected were subjected to statistical analysis using one-way ANOVA and post hoc Tukey's test to analyze the difference of the micro-shear bond strength,and chi-square test/Fisher's exact test for the failure mode frequency of the micro-shear bond strength test specimens at a significance level of P =0.05.Results:The micro-shear bond strength of the three concentration EDC treatments were (35.29 ± 8.97) MPa (0.01 mol/L EDC treatment group),(40.24 ±9.68) MPa (0.3 mol/L EDC treatment group),(37.38 ±9.66) MPa (0.5 mol/L EDC treatment group) separately;and that of the 80％ ethanol group was (37.49 ± 7.76) MPa.All micro-shear bond strength value of the above four groups was statistically higher than that of the blank control group [(33.81 ± 7.98) MPa].The immediate microshear bond strength and failure mode was of no statistically significant difference among all the groups.It was noticed that the immediate micro-shear bond strength of 0.3 mol/L was higher than that of all the other groups,especially higher than that of the 80％ ethanol pretreatment group despite that there was no significant difference among all the groups.And the test of failure mode indicated that the cohesive failure was more common,while the frequency of adhesive failure was rare in each experimental group.Conclusion:EDC pretreatment had no adverse effect on the immediate micro-shear bond strengths of Clearfil SE Bond.Meanwhile,EDC treatment did not cause more adhesive failure in immediate micro-shear test,which had further denoted what was said above.However,it needs more research to illustrate the antienzymatic role of EDC in dentin bonding.

Effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin

OBJECTIVES: This in vitro study evaluated the effect of dentin biomodifiers on the immediate and long-term bond strengths of a simplified etch and rinse adhesive to dentin. MATERIALS AND METHODS: Flat coronal dentin surfaces were prepared in 120 extracted human molars. Teeth were randomly divided into 5 groups (n = 24) according to 5 different surface pre-treatments: No pre-treatment (control); 1M carbodiimide (EDC); 0.1% epigallocatechin-3-gallate (EGCG); 2% minocycline (MI); 10% sodium ascorbate (SA). After surface pre-treatment, adhesive (Adper Single Bond 2 [SB], 3M ESPE) was applied. Composite was applied into transparent plastic tubes (2.5 mm in diameter), which was placed over the bonded dentin surface. From each group, 10 samples were subjected to shear bond strength (SBS) evaluation at 24 hours (immediate) and remaining 10 samples were tested after 6 months (delayed). Additionally, 4 samples per group were subjected to scanning electron microscopic analysis for observation of resin-dentin interface. The data were statistically analysed with Shaperio‑Wilk W test, 2-way analysis of variance (ANOVA), and post hoc Tukey's test. RESULTS: At 24 hours, SBS of all surface pre-treatment groups were comparable with the control group, with significant differences found between EDC and SA groups only (p = 0.009). After 6 months storage, EDC, EGCG, and MI pre-treatments preserved the resin-dentin bond strength with no significant fall. CONCLUSIONS: Dentin pre-treatment with all the dentin biomodifiers except SA resulted in significant preservation of resin-dentin bond over 6 months storage period, without negatively affecting the immediate bond strength of the etch and rinse adhesive tested.