Guía de atención para pacientes con maloclusión de clase II con dentición permanente en crecimiento activo

Fundamento la maloclusión de clase II presenta la mayor prevalencia entre las alteraciones dentoesqueléticas. Objetivo: proponer una guía de atención para pacientes con maloclusión de clase II con dentición permanente en crecimiento activo. Métodos: se realizó una investigación de innovación tecnológica de enfoque mixto en el Departamento de Ciencias Clínicas de la Facultad de Estomatología de la Universidad de Ciencias Médicas de Villa Clara, en el periodo comprendido entre los años 2020 y 2023. El universo de estudio estuvo constituido por todos los especialistas de Ortodoncia de la provincia de Villa Clara, Sancti Spíritus y Cienfuegos, a partir del cual se realizó un muestreo no probabilístico intencional por criterios y quedó constituida la muestra por 20 especialistas y siete expertos (especialistas de categoría superior) con criterios de inclusión. Resultados: la documentación revisada aportó información valiosa para determinar el estado actual de la atención de la maloclusión de estudio. Los especialistas emitieron diferentes criterios sobre el diagnóstico y tratamiento de la maloclusión de clase II. Los expertos establecieron los elementos invariables para su clasificación. Finalmente se diseñó una guía de atención para los pacientes con maloclusión de clase II con dentición permanente en crecimiento activo, valorada por los especialistas con la categoría de excelente. Conclusiones: la guía propuesta contiene elementos invariables de diagnóstico y pautas de tratamiento con el fin de lograr una atención más integral y eficiente de la maloclusión.

Foundation: Class II malocclusion has the highest prevalence among dentoskeletal disorders. Objective: to propose a care guide for patients with class II malocclusion with actively growing permanent dentition. Method: a mixed approach technological innovation research was carried out in the Clinical Sciences Department from the Stomatology Faculty of the Villa Clara Medical Sciences University, from 2020 to 2023. The studied universe was all the Orthodontic specialists in the Villa Clara province, Sancti Spíritus and Cienfuegos, from which an intentional non-probabilistic sampling was carried out by criteria and the sample was made up of 20 specialists and seven experts (higher category specialists) with criteria of inclusion. Results: The reviewed documentation provided valuable information to determine the current state of care for malocclusion under study. Specialists issued different criteria on the diagnosis and treatment of class II malocclusion. The experts established the invariable elements for their classification. Finally, a care guide was designed for patients with class II malocclusion with actively growing permanent dentition, rated by specialists as excellent. Conclusions: the proposed guide contains invariable diagnostic elements and treatment guidelines in order to achieve more comprehensive and efficient malocclusion care.

Comparison of the virtual surgical planning position of maxilla and condyle with the postoperative real position in patients with mandibular protrusion / 北京大学学报(医学版)

Objective:To compare the difference between virtual surgical planning(VSP)position and postoperative real position of maxilla and condyle,and to explore the degree of intraoperative realization of VSP after orthognathic surgery.Methods:In this study,36 patients with mandibular protrusion de-formity from January 2022 to December 2022 were included.All the patients had been done bilateral sagittal split ramus osteotomy(SSRO)combined with Le Fort Ⅰ osteotomy under guidance of VSP.The VSP data(T0)and 1-week postoperative CT(T1)were collected,the 3D model of postoperative CT was established and segmented into upper and lower jaws in CCMF Plan software.At the same time,accor-ding to the morphology of palatal folds,the virtual design was registered with the postoperative model,and the unclear maxillary dentition in the postoperative model was replaced.Then the postoperative model was matched with VSP model by registration of upper skull anatomy that was not affected by the opera-tion.The three-dimensional reference plane and coordinate system were established.Selecting anatomical landmarks and their connections of condyle and maxilla for the measurement,we compared the coordinate changes of marker points in three directions,and the angle changes between the line connecting the marker points and the reference plane to analyze the positional deviation and the angle deviation of the postoperative condyle and maxilla compared to VSP.Results:The postoperative real position of the maxilla deviates from the VSP by nearly 1 mm in the horizontal and vertical directions,and the anteropos-terior deviation was about 1.5 mm.In addition,most patients had a certain degree of counterclockwise rotation of the maxilla after surgery.Most of the bilateral condyle moved forward,outward and downward(the average distance deviation was 0.15 mm,1.54 mm,2.19 mm,respectively),and rotated forward,outward and upward(the average degree deviation was 4.32°,1.02°,0.86°,respectively)compared with the VSP.Conclusion:VSP can be mostly achieved by assistance of 3D printed occlusal plates,but there are certain deviations in the postoperative real position of maxilla and condyle compared with VSP,which may be related to the rotation axis of the mandible in the VSP.It is necessary to use patient personalized condylar rotation axis for VSP,and apply condylar positioning device to further improve surgical accuracy.

Insulin-Like Growth Factor-1 and Insulin-Like Growth Factor Binding Protein-3 - Biomarkers for Skeletal Maturity Assessment in Class II Malocclusion

ABSTRACT Objective: To estimate the serum levels of non-radiologic biomarkers, Insulin-like Growth Factor-1 (IGF-1), and Insulin-like Growth Factor Binding Protein-3 (IGFBP-3) to potentially identify the pubertal growth spurt in skeletal Class II malocclusion subjects. Material and Methods: Eighty subjects (M-38, F-42) with skeletal Class II malocclusion in the age range of 11-18 years were recruited for the cross-sectional study. Human serum IGF-1 and IGFBP-3 were quantitatively assessed by enzyme-linked immunosorbent assay, and the cervical stage (CS) was evaluated from a lateral cephalogram. Results: Gender-wise comparison of the mean serum IGF-1 levels revealed that the initial peak was detected at CS2 in both genders, [males (87.87 ng/mL), females (78.49 ng/mL)]. However, there was a cognizable difference in the second peak of the mean serum IGF-1 levels between males (CS5, 68.58 ng/mL) and females (CS4, 74.63 ng/mL). Mean IGFBP-3 serum levels in male subjects were high in CS4 (47.24 ng/mL) with a further spike in CS6 (50.54 ng/mL), and in female subjects, it was found to be highest in CS3 (51.95 ng/mL) and then in CS5 (49.68 ng/mL). Conclusion: Mean IGF-1 levels exhibited both sexes' prepubertal and late pubertal spikes. Mean IGFBP-3 levels revealed a pubertal and a late pubertal spike in both sexes, with an earlier growth trend observed specific to females compared to males.

Posición del incisivo inferior en pacientes de clase esqueletal I y II según su biotipo facial en una muestra de una clínica privada, Cali 2014 - 2020 / Position of the lower incisor in patients of skeletal class I and II according to their facial biotype in a sample from a private clinic, Cali 2014 - 2020

Introducción: la sínfisis mentoniana es la articulación cartilaginosa medial de los huesos mandibulares, su posición se relaciona con los diferentes biotipos y puede influir en la posición del incisivo inferior. Objetivo: determinar si existen variaciones en la posición del incisivo inferior, en pacientes clase II con diferentes biotipos. Materiales y métodos: se evaluaron la totalidad de tomografías de pacientes clase I y II esquelética que asistieron entre 2014 y 2020 a una clínica privada, teniendo una muestra total de 74 pacientes, caracterizándolos por sexo y edad. Se determinó biotipo facial, Incisor Mandibular Plane Angle, distancias a la sínfisis como el ACV-ACL y altura desde el ápice. Para el análisis se utilizó I-CAT Visión Q, para las medidas de las tomografías digitales y para el análisis estadístico Stata 17. Resultados: se en- contró un Incisor Mandibular Plane Angle mayor en pacientes clase II en los tres biotipos; los dolicofaciales clase II mostraron menor valor en corticales ACV-ACL, los pacientes mostraron mayor proinclinación en la clase II. La posición del incisivo en pacientes clase II presenta una proinclinación significativa en braquifaciales (p = 0.04). Conclusión: se encontraron variaciones entre los tres biotipos faciales en las diversas mediciones en pacientes clase I y II, el sexo femenino evidenció diferencias significativas en las clases en las medidas del Incisor Mandibular Plane Angle y la altura de la sínfisis a nivel del ápice; estos hallazgos son relevantes en el momento de realizar un tratamiento ortodóntico ya que puede limitar el movimiento de los incisivos inferiores.

Introduction: the mental symphysis is the medial cartilaginous joint of the mandibular bones, its position is related with the different biotypes and can influence the position of the lower incisor. Objective: to determine if there are variations in the position of the lower incisor, in class II patients with different biotypes. Materials and methods: all the tomography of skeletal class I and II patients who attended a private clinic between 2014 and 2020 were evaluated, having a total sample of 74 participants, characterizing the patients by sex and age. Facial biotype, Incisor Mandibular Plane Angle, distances to the symphysis such as the ACV-ACL and height from the apex were determined. For the analysis, I-CAT Vision Q was used for the measurements of the digital tomography and for the statistical analysis Stata 17. Results: a greater Incisor Mandibular Plane Angle in class II patients in the three biotypes was evident; class II dolichofacials showed a lower value in both cortical ACV-ACL, with the narrowest and longest measurement of the symphysis, the patients showed proclination in class II for both sexes, being higher for the male. The position of the incisor within the symphysis in class II patients presents a significant proclination in brachyfacial patients (p=0.04), despite presenting greater proclination, it maintains its apices centered within the symphysis. Conclusion: variations were found between the three facial biotypes in class I and II patients, it is relevant when performing orthodontic treatment since it can limit the movement of the lower incisors.

Tratamento da classe III com disjunção maxilar e tração reversa da maxila: relato de caso clínico / Class III treatment weth maxillary disjunction and reverse maxillary traction: clinical case report

Objetivo: A má oclusão classe III de Angle se caracteriza por protrusão mandibular, retrusão maxilar ou pela combinação de ambas. Além de prejudicar a estética facial do paciente, essa má oclusão pode causar alterações funcionais e respiratórias. Uma das alternativas de tratamento para esses casos é o uso da máscara de Petit e do aparelho disjuntor de Hyrax. Este estudo tem como objetivo avaliar por meio da cefalometria ortodôntica se o tratamento com expansão maxilar em conjunto com a tração reversa da maxila diminuem os agravos estéticos e funcionais do paciente Classe III. Relato de caso: o relato de caso descrito no presente trabalho é sobre uma paciente que foi submetida a esse tratamento, sendo descrito por meio de análises cefalométricas, exames radiográficos, fotos intrabucais e achados clínicos. Considerações finais: A verificação dos resultados obtidos após o término do tratamento mostrou que a paciente teve uma boa adesão ao uso desses aparelhos e obteve resultados satisfatórios na sua função mastigatória, na sua oclusão e na sua estética facial e dentária.(AU)

Objective: Angle class III malocclusion is characterized by mandibular protrusion, maxillary retrusion or a combination of both. In addition to impairing the patient's facial aesthetics, this malocclusion can cause functional and respiratory changes. One of the treatment alternatives for these cases is the use of the Petit mask and the Hyrax breaker device. This study aims to evaluate, through orthodontic cephalometry, whether the treatment with maxillary expansion in conjunction with the reverse traction of the maxilla reduces the aesthetic and functional problems of Class III patients. Case report: the case report described in the present work is about a patient who underwent this treatment, being described through cephalometric analysis, radiographic examinations, intraoral photos and clinical findings. Final considerations: The verification of the results obtained after the end of the treatment showed that the patient had a good adherence to the use of these devices and obtained satisfactory results in her masticatory function, in her occlusion and in her facial and dental aesthetics.(AU)

Skeletal Class III Surgical-Orthodontic Treatment and Remote Digital Monitoring during COVID-19 Pandemic: A Case Report

@#Moderate to severe cases of skeletal Class III malocclusion, where residual growth is no longer present and orthodontic camouflage would not achieve satisfactory outcomes, are good candidates for a combined surgical-orthodontic approach. We present the case of a 34-year-old healthy male with skeletal Class III malocclusion, where aesthetics and masticatory function were further worsened by maxillary and mandibular transverse discrepancy, hyperdivergent pattern, moderate dental crowding, occlusal contacts present only on molars, negative overjet and overbite. The management of the case included a pre-surgical phase of surgically assisted rapid palatal expansion (SARPE) and an orthodontic treatment with fixed multi-bracket appliance, a surgical phase consisting in Le Fort I osteotomy and bilateral sagittal split osteotomy (BSSO), and a myofunctional physical therapy targeting orofacial muscles following the orthognathic surgery. The pre-surgical phase was additionally integrated with a system of remote digital monitoring, such as Dental Monitoring®, to early detect any orthodontic emergency. As in-office visits were abruptly interrupted because of COVID-19 pandemic, the remote digital system also permitted to regularly monitor the patient at long-distance. In conclusion, a case of skeletal Class III malocclusion was successfully managed with a multidisciplinary approach which involved orthognathic surgery, orthodontic treatment, and myofunctional physical therapy. The additional integration of remote digital technologies, such as Dental Monitoring®, may provide a continuity of care to orthodontic patients in times of COVID-19 pandemic, when the regularity of non-urgent chairside appointments might be disrupted.

A long-term evaluation of periodontal phenotypes before and after the periodontal-orthodontic-orthognathic combined treatment of lower anterior teeth in patients with skeletal Angle class Ⅲ malocclusion / 北京大学学报(医学版)

OBJECTIVE@#To evaluate the changes of periodontal phenotype (width of keratinized gingiva, thickness and height of alveolar bone) of lower anterior teeth in patients with skeletal class Ⅲ malocclusion before and after the periodontal-orthodontic-orthognathic combined treatment.@*METHODS@#In the study, 20 patients with skeletal class Ⅲ malocclusion (6 males and 14 females) completed the periodontal-orthodontic-orthognathic combined treatment were included from March 2017 to June 2022, with 39 central incisors, 40 lateral incisors and 40 canines. The mean age was (25.40±4.27) years (20-34 years). The mean follow-up time was (3.70±1.05) years from the beginning of periodontal corticotomy regenerative surgery (PCRS) to the end of the combined treatment. Cone-beam computed tomography (CBCT) was used to measure the thickness, area and height of alveolar bone by the same researcher, taken before the PCRS (T0), 6 months after the PCRS (T1), 12 months after the PCRS (T2), before the orthognathic surgery (T3), and after the periodontal-orthodontic-orthognathic combined treatment (T4). The periodontal clinical parameters were used to evaluate changes in the soft tissue by another researcher, measured before the PCRS (T0) and after the combined treatment (T4). Changes of soft and hard tissue were evaluated by the periodontal phenotype.@*RESULTS@#The width of keratinized gingiva increased significantly (all P < 0.001) in lower anterior teeth, the central incisors, lateral incisors and canines increased by (1.82±1.57) mm, (2.03±1.48) mm and (2.05±1.27) mm, respectively. The proportion of thick periodontal biotype in the central and lateral incisors increased significantly (all P < 0.001), while the changes of periodontal biotypes in the lower canines were not obvious. The thickness of labial alveolar bone of lower anterior teeth all increased significantly after periodontal corticotomy regenerative surgery and the combined treatment (all P < 0.001). The area of labial alveolar bone of lower anterior teeth also increased significantly after the combined treatment (all P < 0.001). The whole area of labial and lingual alveolar bone of central and lateral incisors increased (P < 0.001), while the whole area of canines remained the same. All The height of the alveolar bone increased (all P < 0.001) on the labial side after the treatment.@*CONCLUSION@#The periodontal phenotypes of lower anterior teeth were significantly improved after the periodontal-orthodontic-orthognathic combined treatment in patients with skeletal Angle class Ⅲ malocclusion. The improvement was long-termly stable, and the periodontal risk was reduced.

Study on the effect of chin morphology on orthodontic treatment / 华西口腔医学杂志

OBJECTIVES@#To investigate the effect of different soft-tissue morphologies on the treatment of skeletal class Ⅰ malocclusion patients by analyzing measurement data before and after treatment.@*METHODS@#Pre- and post-treatment lateral cephalograms of 55 adult female Angle class Ⅰ patients were collected in the Department of Orthodontics, Hospital of Stomatology, Jilin University from January 2012 to December 2020. Chin soft-tissue morphologies in the lateral cranial radiographs were used to divide the patients into an abnormal chin morphology group (flat and retracted chins, n=27) and a normal chin morphology group (rounded and prominent chins, n=28). Relevant soft- and hard-tissue indexes were selected to study in-group varieties and intergroup differences in the varying chin morphologies before and after treatment.@*RESULTS@#The chin-lip angle, mandibular chin angle, mandibular chin vertex angle, PP-MP, LL-E, UL-E, Po-Pos, and B-B' thickness in the abnormal chin morphology group were significantly higher than those in the normal chin morphology group (P<0.05). Furthermore, m∶BMe and n∶B'Mes in the abnormal chin morphology group were signi-ficantly lower than those in the normal chin morphology group (P<0.05). After treatment, the mandibular chin angle, mandibular chin vertex angle, U1-SN, L1-MP, LL-E, UL-E, SNA, SNB, and B-B' thickness of the abnormal chin morphology group significantly decreased (P<0.05), whereas the nasolabial angle, m∶BMe, n∶B' Mes, and Po-Pos significantly increased (P<0.05). In the normal chin morphology group, the U1-SN, L1-MP, LL-E, UL-E, and B-B' thicknesses decreased significantly (P<0.05), whereas the nasolabial angle significantly increased (P<0.05). Among them, m∶BMe and n∶B' Mes were positively correlated.@*CONCLUSIONS@#Chin morphology affects the formulation of treatment plans. Compared with the normal chin morphology group, the abnormal chin morphology group required a larger retraction of incisors. Although the chin of soft-tissue morphology is related to the morphology of bones, the changes in soft tissue chin after treatment cannot be directly predicted according to the bone changes. Soft-tissue chin morphology affects the aesthetic assessment of the soft-tissue lateral profile and the change in soft tissue before and after treatment. The method of predicting the change in soft-tissue chin after treatment should consider the morphology of the soft-tissue chin.

Cephalometric comparison of mandibular growth in Brazilian children with Class II malocclusion and normal occlusion during the growth stages determined by the cervical vertebrae maturation

ABSTRACT Objective: This study compared mandibular growth in children, aged 7 to 12 years, with Class II malocclusion and normal occlusion, between the following stages of cervical vertebrae maturation: initiation (I), acceleration (A), transition (T). Material and Methods: A total of 148 lateral cephalograms (78 males, 70 females) of Class II malocclusion patients, and 60 lateral cephalograms (30 males, 30 females) of normal occlusion patients were included. The following linear cephalometric measurements were performed: Co-Gn (effective mandibular length), Co-Go (ramus height), and Go-Gn (length of mandibular body). Mean values of increments between stages (I-A, A-T, I-T) were obtained for each group and gender. Results were compared using the Student t-test, and a significance level of 0.05% was adopted. Results: Females group: A-T interval presented a greater increment in Co-Go in the Class II group, which was not significant for the I-T interval, with numerically smaller increments in Co-Gn and Go-Gn, without statistical significance. Males group: intervals I-A, A-T and I-T showed numerically smaller growth increments in the Class II group, with statistical significance for Co-Gn in I-A (p=0.001) and I-T (p=0.003). Comparing genders of the Class II group, Co-Go was higher in males (p=0.002) and I-T interval (p=0.031). In the Normal Occlusion group, the male gender had the greatest Co-Gn (p=0.038) for the I-A interval. In A-T and I-T, Co-Go in males was higher, with statistical significance (p=0.000 and p=0.002, respectively). Conclusion: Growth phenomenon affects the mandibular dimensions regardless of the character of the malocclusion, with a tendency to be smaller in the presence of Class II malocclusion.

RESUMO Objetivo: Esse estudo comparou o crescimento mandibular em crianças de 7 a 12 anos de idade, com má oclusão de Classe II ou Oclusão Normal, entre os seguintes estágios de maturação das vértebras cervicais: iniciação (I), aceleração (A), transição (T). Material e Métodos: No total, 148 telerradiografias laterais (78 meninos, 70 meninas) de pacientes com má oclusão de Classe II e 60 telerradiografias laterais (30 meninos, 30 meninas) de pacientes com Oclusão Normal foram avaliadas. As medidas cefalométricas lineares Co-Gn (comprimento mandibular efetivo), Co-Go (altura do ramo mandibular) e Go-Gn (comprimento do corpo mandibular) foram analisadas e os valores médios dos incrementos entre os estágios (I-A, A-T e I-T) foram obtidos para cada grupo e sexo. Resultados: Os resultados foram comparados pelo teste t de Student, e o nível de significância adotado foi de 0,05%. Sexo feminino: houve maior incremento na altura do ramo no grupo Classe II em A-T, que diminuiu em I-T, com menores incrementos no comprimento mandibular efetivo e no corpo mandibular, sem significância estatística. Para o sexo masculino, nos intervalos I-A, A-T, I-T, os incrementos de crescimento foram numericamente menores no grupo Classe II, com significância estatística para o comprimento efetivo da mandíbula em I-A (p= 0,001) e em I-T (p= 0,003). No grupo Classe II, a altura do ramo foi maior para o sexo masculino (p= 0,002) e no intervalo I-T (p= 0,031). No grupo Oclusão Normal, o sexo masculino apresentou o maior comprimento mandibular efetivo (p= 0,038) no intervalo I-A. Nos intervalos A-T e I-T, a altura do ramo mandibular no sexo masculino foi maior e com significância estatística de p= 0,000 e p= 0,002, respectivamente. Conclusão: O fenômeno do crescimento afeta as dimensões mandibulares independentemente do característica da má oclusão, com tendência a ser menor na presença da má oclusão de Classe II.

Management of ankylosed teeth using the decoronation technique: integrative literature review and case report

ABSTRACT Introduction: The decoronation technique has been described in literature since 1984 and, based on the available results, it can lead to considerable benefits for the repair and rehabilitation of ankylosed teeth. Based on these reports, one could expect that this procedure would be well known by the dental community. However, this fact does not seem to be true, and this procedure is not widely used. Methods: The objective of this paper is to present appropriate literature that discusses decoronation and evaluate the perspectives of the procedure, both in relation to the technique and the long-term benefits for the patient. An integrative literature review at PubMed, ScieELO, and Lilacs databases was performed using the keywords "decoronation", "ridge preservation decoronation", "decoronation ankylosis". In addition, a case report will be presented to demonstrate the technique in a systematic and detailed manner. Results: Considering the inclusion criteria, 27 articles that present consistency regarding decoronation were selected. Conclusion: There is scarce availability of scientific works related to the topic, to corroborate and discuss the technique. The present paper reinforces the benefits of this procedure, and revisit decoronation, attempting to provide a possible treatment for ankylosed teeth in growing patients.

RESUMO Introdução: A técnica de decoronação é descrita na literatura desde 1984 e, com base nos resultados disponíveis, pode trazer benefícios consideráveis para o reparo e reabilitação de dentes anquilosados. Com base nesses relatos, seria esperado que esse procedimento fosse bem conhecido pela comunidade odontológica. No entanto, isto não parece ser verdadeiro e esse procedimento não é amplamente utilizado. Objetivo: O objetivo deste artigo é apresentar literatura adequada que discuta a decoronação e avalie as perspectivas do procedimento, tanto em relação à técnica quanto aos benefícios em longo prazo para o paciente. Métodos: Foi realizada revisão integrativa da literatura nas bases de dados PubMed, SciELO e Lilacs, utilizando as seguintes palavras-chave: "decoronation", "ridge preservation decoronation", "decoronation ankylosis". Além disso, um relato de caso demonstrará a técnica de maneira sistemática e detalhada. Resultados: Considerando os critérios de inclusão, foram selecionados 27 artigos que apresentam consistência quanto à decoronação. Conclusão: Há escassa disponibilidade de trabalhos científicos relacionados ao tema para corroborar e discutir a técnica. Esse artigo reforça os benefícios desse procedimento e revisa a decoronação na tentativa de fornecer um possível tratamento para dentes anquilosados em pacientes em crescimento.

Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Prevalence and extent of Alveolar dehiscence and fenestration in Class I hyperdivergent subjects with different buccolingual inclinations of maxillary molar teeth: a CBCT study

Buccolingual position of teeth could affect the prevalence of alveolar bone defects. Presence of alveolar defects may have a deleterious effect on orthodontic treatment. The aim was to assess the prevalence and extent of dehiscence and fenestration in Class I hyperdivergent subjects and correlate it with buccolingual inclinations(BL) of maxillary first molar teeth. Methods: This retrospective study involved 80 CBCTs of class I hyperdivergent subjects divided into two groups - group A (n=33) buccolingual inclination >9º and group B (n=47) buccolingual inclination <9º. Prevalence and extent of alveolar bone dehiscence and fenestrations were measured in CBCTs using OSIRIX Lite software. Descriptive statistics, Mann Whitney U test and Spearman correlation were done for evaluating intergroup differences and correlation with Buccolingual inclination. Results: Overall prevalence of dehiscence and fenestration in maxillary first molars was 60.95% and 5% respectively. In the buccal alveolar bone, prevalence of dehiscence was highest in group A (84.6%) for 16 and in the lingual alveolar bone prevalence of dehiscence was highest in group B (71.4%) for 26 . On intergroup comparison, the extent of lingual alveolar bone dehiscence (26) in group B was significantly higher (p value <0.05) than in group A. No significant correlation between the extent of dehiscence and fenestration with buccolingual inclination of molar teeth was noted. Conclusion: Molar teeth with BL inclinations of more than 9º had higher prevalence of dehiscence on the buccal side and molar teeth with BL inclinations less than 9 degrees had more dehiscence on the lingual side. But no significant correlation of BL inclination with prevalence and extent of dehiscence and fenestration was noted

Evaluation of the maximum tongue and lip pressure in individuals with Class I, II, or III Angle malocclusions and different facial types / Avaliação da pressão máxima da língua e dos lábios em indivíduos com má oclusão Classe I, II e III de Angle e diferentes padrões faciais

ABSTRACT Purpose To compare the maximum anterior and posterior tongue pressure, tongue endurance, and lip pressure in Class I, II, and III malocclusions and different facial types. Methods A cross-sectional observational analytical study was carried out in 55 individuals (29 men and 26 women) aged between 18 and 55 years. The participants were divided into groups according to Angle malocclusion (Class I, II, and III) and facial type. The maximum anterior and posterior tongue pressure, tongue endurance, and maximum lip pressure were measured using the IOPI (Iowa Oral Performance Instrument). To determine the facial type, the cephalometric analysis was accomplished using Ricketts VERT analysis as a reference. Results There was no statistically significant difference when comparing the maximum pressure of the anterior and posterior regions of the tongue, the maximum pressure of the lips, or the endurance of the tongue in the different Angle malocclusion types. Maximum posterior tongue pressure was lower in vertical individuals than in mesofacial individuals. Conclusion Tongue and lips pressure, as well as tongue endurance in adults was not associated with the type of malocclusion. However, there is an association between facial type and the posterior pressure of the tongue.

RESUMO Objetivo comparar a pressão máxima anterior e posterior da língua, a resistência da língua e a pressão labial em indivíduos com más oclusões Classe I, II e III e diferentes tipos faciais. Método foi realizado um estudo analítico observacional transversal em 55 indivíduos (29 homens e 26 mulheres) com idades entre 18 e 55 anos. Os participantes foram divididos em grupos de acordo com a classificação de Angle para má oclusão (Classe I, II e III) e tipo facial. A pressão máxima anterior e posterior da língua, a resistência da língua e a pressão máxima dos lábios foram medidas usando o IOPI (Iowa Oral Performance Instrument). Para determinar o tipo facial, a análise cefalométrica foi realizada utilizando como referência a análise Ricketts VERT. Resultados não houve diferença estatisticamente significativa ao comparar a pressão máxima das regiões anterior e posterior da língua, a pressão máxima dos lábios ou a resistência da língua nos diferentes tipos de má oclusão. A pressão máxima posterior da língua foi menor em indivíduos com tipo facial vertical do que nos indivíduos mesofaciais. Conclusão a pressão de língua e lábios, assim como a resistência de língua em adultos não foi associada ao tipo de má oclusão. No entanto, existe uma associação entre o tipo facial e a pressão posterior da língua.

Orthodontic biomechanics with intermaxillary elastics

ABSTRACT Introduction: Intermaxillary elastics are orthodontic resources widely used in various malocclusions. Their main advantages are low cost, easy insertion and removal by patients, and application versatility. As main disadvantages, we can highlight the need for cooperation from patients and the side effects normally present in treatments with this resource. Knowledge of the biomechanics involved in the use of intermaxillary elastics is essential to take full advantage of the desired effects and avoid unwanted effects in their use. Objective: Therefore, the objective of this article is to describe the anchorage preparation, connection methods, time and force of use, and side effects involved in the use of intermaxillary elastics for the treatment of anteroposterior, vertical and transverse problems. For that, clinical cases and biomechanics schemes will be presented, in which all these details will be described.

RESUMO Introdução: Os elásticos intermaxilares são recursos ortodônticos amplamente utilizados nas diversas más oclusões. Possuem como principais vantagens o baixo custo, fácil inserção e remoção pelos pacientes, e versatilidade de aplicação. Como desvantagens podemos destacar a necessidade de cooperação dos pacientes e os efeitos colaterais normalmente presentes nos tratamentos com esse recurso. O conhecimento da biomecânica envolvida no uso dos elásticos intermaxilares é fundamental para se obter o máximo de efeitos desejados e evitar os efeitos indesejados na sua utilização. Objetivo: O objetivo desse artigo é descrever o preparo da ancoragem, as formas de conexão, o tempo e a força de uso, além dos efeitos colaterais envolvidos na utilização dos elásticos intermaxilares para tratamento de problemas anteroposteriores, verticais e transversais. Para isso, serão apresentados casos clínicos e esquemas de biomecânica em que todos esses detalhes serão descritos.

Compensation in Class III Malocclusions: Analysis of Tooth Crown Inclination on Digital Dental Casts / Compensação da Má Oclusão de Classe III: Análise da Inclinação das Coroas dos Dentes em Modelos Digitais

The objective of this study was to evaluate the tooth crown inclination in maxillary and mandibular arches in Class III malocclusion individuals, to identify the presence and magnitude of compensation. The study was conducted on 46 plaster casts of individuals with Class III malocclusion, of both genders (25 males and 21 females), with mean age 21 years and 1 month, with indication for compensatory orthodontic treatment. The dental casts models were scanned and the tooth crown inclinations were measured and compared with standard values by the independent t test. All tests considered a significance level of 5% (p<0.05). According to the results there was extensive variation in tooth inclination in Class III malocclusions. Values distribution for incisors highlighted the significant concentration of maxillary incisors in the area of positive values, compared with a very expressive concentration of mandibular incisors in the area of negative values. Compared with normal standards, in Class III malocclusions, the maxillary posterior teeth exhibited smaller palatal inclination than normal, while the mandibular incisors and second molars presented greater lingual inclination. It was concluded that the analysis of inclinations of all crowns of both dental arches in Class III malocclusions, compared with normal standards, evidenced the presence of natural compensation for maxillary posterior teeth, with reduced palatal inclination, as well as increased lingual inclination in mandibular incisors. The parameters of compensation naturally present in Class III malocclusions described, especially in lower incisors, would help clinicians when compensatory treatment is considered. (AU)

O objetivo deste estudo foi avaliar a inclinação das coroas dentárias nas arcadas superior e inferior em indivíduos com má oclusão de Classe III, para identificar a presença e a magnitude da compensação. O estudo foi realizado em 46 modelos de gesso de indivíduos com má oclusão de Classe III, de ambos os sexos (25 homens e 21 mulheres), com média de idade de 21 anos e 1 mês, com indicação de tratamento ortodôntico compensatório. Os modelos de gesso foram digitalizados e as inclinações da coroa dos dentes foram medidas e comparadas com os valores de normalidade pelo teste t independente. Todos os testes estatísticos adotaram um nível de significância de 5% (p <0,05). De acordo com os resultados, houve grande variação na inclinação dentária nas más oclusões de Classe III. A distribuição dos valores para os incisivos destacou a concentração significativa de incisivos superiores na área de valores positivos, em comparação com uma concentração muito expressiva de incisivos inferiores na área de valores negativos. Comparados aos padrões de normalidade, nas más oclusões de Classe III, os dentes posteriores superiores exibiram inclinação palatina menor que o normal, enquanto os incisivos e segundos molares inferiores apresentaram inclinação lingual maior. Concluiu-se que a análise das inclinações de todas as coroas de ambas as arcadas dentárias nas más oclusões de Classe III, comparadas aos padrões de normalidade, evidenciou a presença de compensação natural para os dentes posteriores superiores, com diminuição da inclinação palatina, bem como aumento da inclinação lingual dos incisivos inferiores. Os parâmetros de compensação naturalmente presentes nas más oclusões de Classe III descritos, especialmente nos incisivos inferiores, podem auxiliar o clínico quando o tratamento compensatório é considerado. (AU)

Orthodontists' preferences in the use and timing of appliances for the correction of malocclusions in growing patients / Preferencias de los ortodoncistas en el uso y momento oportuno de uso de aparatos para la corrección de maloclusiones en pacientes en crecimiento

Objective: To evaluate orthodontists' preferences in the use and timing of appliances for the correction of Class II and Class III malocclusions in growing patients and the sociodemographic factors that influence these preferences. Material and Methods: Active members of the Colombian Orthodontics Society (SCO) were invited to complete a previously validated survey on the use of Class II and Class III correctors in growing patients. Results: 180 orthodontists responded (80 male, 100 female). The appliances used most frequently in the treatment of Class II malocclusion were Planas indirect tracks (32.78%) and Twin-blocks (30.56%). Facemasks (62.22%) and Progenie plates (25%) were the most prevalent appliances used in the treatment of Class III malocclusions. Regarding treatment timing, 52% of the orthodontists stated that Class II malocclusions must be treated during late mixed dentition or early permanent dentition, 42% stated that treatment for Class III malocclusions should occur during early mixed dentition. Appliance use and treatment timing were significantly associated with sex (p= 0.034), years of practice (p= 0.025), and area of work (private clinics or public institutions), (p= 0.039). Conclusion: Twin-blocks and Facemask appliances were the preferred appliances for Class II and Class III treatment, respectively, in growing patients. Most of the orthodontists believed that Class II malocclusions must be treated during late mixed dentition and that Class III malocclusions must be treated during early mixed dentition. Sociodemographic variables are related factors that influence orthodontists' preferences in the use of these appliances.

Objetivo: Evaluar las preferencias de los ortodoncistas en el uso y momento oportuno de uso de aparatología para la corrección de maloclusiones Clase II y Clase III en pacientes en crecimiento y los factores sociodemográficos que influyen en estas preferencias. Material y Métodos: Se invitó a miembros activos de la Sociedad Colombiana de Ortodoncia (SCO) a completar una encuesta previamente validada, sobre el uso de correctores para Clase II y Clase III en pacientes en crecimiento. Resultados: Respondieron un total de 180 ortodoncistas (80 hombres, 100 mujeres). La aparatología más utilizada en el tratamiento de las maloclusiones de Clase II fueron pistas indirectas de Planas (32,78%) y bloques gemelos (30,56%). La máscara facial (62,22%) y las placas progenie (25%) fueron los aparatos más utilizados en el tratamiento de las maloclusiones de Clase III. En cuanto al momento oportuno del tratamiento, el 52% de los ortodoncistas afirmó que las maloclusiones de Clase II deben tratarse durante la dentición mixta tardía o la dentición permanente temprana, el 42% afirmó que el tratamiento para las maloclusiones de Clase III debe ocurrir durante la dentición mixta temprana. El uso de aparatos y el momento oportuno del tratamiento se asociaron significativamente con el sexo (p= 0,034), los años de práctica (p= 0,025) y el área de trabajo (clínicas privadas o instituciones públicas) (p= 0,039). Conclusión: Los aparatos bloques gemelos y la máscara facial fueron los preferidos para el tratamiento de Clase II y Clase III, respectivamente, en pacientes en crecimiento. La mayoría de los ortodoncistas consideran que las maloclusiones de Clase II deben tratarse durante la dentición mixta tardía y que las maloclusiones de Clase III deben tratarse durante la dentición mixta temprana. Las variables sociodemográficas son factores relacionados que influyen en las preferencias de los ortodoncistas en el uso de estos aparatos.

Interdisciplinariedad en el diagnóstico del síndrome de clase III esquelético de Moyers / Interdisciplinarity in the diagnosis of Moyers skeletal class III syndrome

RESUMEN Fundamento: Dentro de las anomalías de la oclusión que provocan afectación estética y funcional en los pacientes, se destaca el síndrome de clase III esqueletal de Moyers, cuyo diagnóstico debe ser preciso y precoz. Objetivo: Cuantificar la concordancia entre los criterios diagnósticos ortodóncicos y médicos en los portadores del síndrome de clase III esquelético de Moyers. Metodología: Se realizó un estudio observacional, descriptivo y transversal en la Clínica Estomatológica Provincial Docente "Mártires del Moncada" de Santiago de Cuba desde enero de 2018 hasta enero de 2020. Se estudiaron, por Ortodoncia y diferentes especialidades médicas seleccionadas, 15 pacientes de 8 a 18 años de edad diagnosticados clínica y cefalométricamente con clase III esqueletal de Moyers. Resultados: El nivel de acuerdo entre ortodoncia y las diferentes especialidades médicas fue leve con Oftalmología (Kappa=0.10), casi perfecta con Ortopedia (Kappa=1.00), pobre por Gastroenterología y por Otorrinolaringología (Kappa de 0.09 y 0.10 respectivamente), resultados estadísticamente significativos solo con Ortopedia. Conclusiones: Es evidente la marcada concordancia entre los diagnósticos ortodóncicos y ortopédicos en el síndrome de clase III esquelético, a diferencia del resto de las especialidades médicas; probablemente asociado a la no estandarización de las evaluaciones clínicas.

ABSTRACT Background: Among the occlusion anomalies that cause esthetic and functional affectation in patients, Moyers skeletal class III syndrome stands out, its diagnosis should be accurate and early. Objective: To quantify the concordance between orthodontic and medical diagnostic criteria in patients with Moyers skeletal class III syndrome. Methodology: An observational, descriptive and cross-sectional study was conducted at the "Mártires del Moncada" Provincial Teaching Dental Care Clinic of Santiago de Cuba from January 2018 to January 2020. 15 patients aged 8 to 18 years clinically and cephalometrically diagnosed with Moyers skeletal class III were studied by Orthodontics and different selected medical specialties. Results: The level of agreement between Orthodontics and the different medical specialties was slight for Ophthalmology (Kappa=0.10), almost perfect for Orthopedics (Kappa=1.00), poor for Gastroenterology and Otolaryngology (Kappa of 0.09 and 0.10 respectively), statistically significant results only for Orthopedics. Conclusions: The manifest concordance between orthodontic and orthopedic diagnoses in skeletal class III syndrome is evident, unlike the rest of the medical specialties; probably associated with non-standard clinical evaluations.

Análisis de los fundamentos biológicos del Sistema Ertty Gap III® / Analysis of the biological foundations of the Ertty Gap III® System

RESUMEN: Las maloclusiones clase III durante muchos años han sido un reto en ortodoncia, siendo reconocidas como un desafío diagnóstico y terapéutico para el clínico. En la mayoría de los casos, si no se realiza un tratamiento temprano, la cirugía ortognática se transforma en la única opción para establecer una oclusión correcta y mejorar las caracterÍsticas faciales. El objetivo principal de la intervención temprana, es crear un entorno más favorable para el crecimiento. A lo largo de la historia se han utilizado distintos aparatos ortopédicos para el tratamiento temprano de esta maloclusión, sin embargo se ha observado que muchas veces sus resultados son insuficientes o ineficaces. El Sistema Ertty Gap III® , viene a revolucionar el enfoque con el cual se trataban las maloclusiones Clase III, orientando los efectos terapéuticos a la premaxila, la cual se pensaba inactiva como sitio de crecimiento. La evidencia actual respecto a este sistema es escasa, sin embargo, el uso de ortopedia de fácil manejo a un bajo costo económico, ofrece una alternativa terapéutica en etapas tempranas que permitiría crear un entorno más favorable para el crecimiento, la oclusión y la estética facial.

ABSTRACT: Class III malocclusions have been a challenge in orthodontics for many years, recognized as a diagnostic and therapeutic challenge for the clinician. In most cases, if early treatment is not performed, orthognathic surgery becomes the only option to achieve a correct occlusion and improve facial characteristics. The main goal of early intervention is to create a more favorable environment for growth. Throughout history, different orthopedic devices have been used for the early treatment of this malocclusion. However, it has been observed that their results are often insufficient or ineffective. The Ertty Gap III System comes to revolutionize the approach to the treatment of Class III malocclusions, directing the therapeutic effects to the premaxilla, which was thought to be an inactive growth site. The current evidence regarding this system is scarce; however, easy-to-use orthopedics at a low cost offers a therapeutic alternative in early stages that would allow a more favorable environment for craniofacial growth, occlusion and facial aesthetics.

Cambios en incisivos y su relación con el punto A y el ángulo nasolabial en pacientes Clase II división 2 tratados con y sin extracciones en el Centro Dental Docente UPCH / Changes in incisors and their relationship with point A and nasolabial angle in Class II division 2 patients treated with and without extractions at the UPCH Teaching Dental Center

RESUMEN Antecedentes : Diversos estudios describen las características de la maloclusión clase II-2, sin embargo, son escasos los estudios que evalúan las repercusiones del tratamiento sobre tejidos blandos y esqueléticos. Objetivo : Evaluar los cambios post tratamiento en inclinación y posición incisiva y su relación con el ángulo nasolabial (ANL) y el punto A (PA) en pacientes Clase II división 2, con y sin extracciones en casos de la especialidad de Ortodoncia de la Universidad Peruana Cayetano Heredia. Material y métodos: se realizaron trazados manuales y mediciones de 62 radiografías cefalométricas laterales (31 pre y 31 post-tratamiento), de pacientes con maloclusión de Clase II división 2. El análisis estadístico se realizó con SPSS 21.0 para Windows. Resultados : Se observan proinclinación y protrusión incisiva en todos los pacientes. En pacientes con exodoncias el ANL presentó cambios no significativos, pero correlaciones significativas: cuando aumentó la inclinación incisiva inferior disminuyó el ANL; cuando aumentó el ANL, aumentó el ángulo interincisal (AII). El punto A (PA) experimentó cambios y correlaciones, pero no significativas. En pacientes sin exodoncias no se encontraron correlaciones ni cambios significativos en PA ni en ANL. Las mujeres tratadas sin exodoncia no presentaron cambios significativos, en los hombres los cambios más significativos fueron la inclinación y protrusión incisiva inferior. En los casos con exodoncias en hombres fue el AII; y en las mujeres el AII y el ángulo incisivo superior/ plano palatino. Conclusiones: Existe una relación entre los cambios que se producen en los incisivos y el ANL y PA, aunque la mayoría no son estadísticamente significativos.

ABSTRACT Background : There are studies evaluating cephalometric parameters in Class II division 2 patients. There are no similar investigations in Peru. Objective : To evaluate post-treatment changes in incisor inclination and position and their relationship with the nasolabial angle (ANL) and point A (PA) in Class II division 2 patients, with and without extractions in cases of the Orthodontic specialty program of the Universidad Peruana Cayetano Heredia. Material and methods : manual tracing and measurements of 62 lateral cephalometric radiographs (31 pre and 31 post-treatment) were performed, of patients with Malocclusion Class II division 2. Statistical analysis was performed with SPSS 21.0 for Windows. Results : There was proinclination and incisive protrusion in all patients. In patients with extractions, the ANL presented non-significant changes, but significant correlations: when the lower incisor inclination increased, the ANL decreased; when ANL increased, the interincisal angle (AII) increased. Point A (PA) experienced changes and correlations, but not significant. In patients without extractions, no correlations or significant changes were found in BP or ANL. Women treated without extraction did not show significant changes, in men the most significant changes were lower incisor inclination and protrusion. In the cases with extractions in men it was AII; and in women the AII and the upper incisor angle / palatal plane. Conclusions: There is a relationship between the changes that occur in the incisors and the ANL and PA, although most are not statistically significant.

Research progress on the structural features, treatments, and association with temporomandibular disorder in patients with skeletal class Ⅲ malocclusion with mandibular deviation / 口腔疾病防治

@#Skeletal angle class Ⅲ malocclusion with mandibular deviation involves the rotation and translation of the cranial base, maxilla, mandible, and soft tissue. It compromises the patients’ appearance and stomatognathic function. The treatment outcome is not satisfactory, and correct evaluation is of great significance. The causal relationship between skeletal Class Ⅲ with mandibular deviation and TMD remains controversial. This review focuses on the structural alterations of hard and soft tissue, the etiology, the choice of treatment methods, and the association with TMD in patients with skeletal class Ⅲ malocclusion with mandibular deviation. The results show that mandibular deviation is a complex disease with unclear etiology. It involves morphological changes, rotation and displacement of the cranial base, maxilla and mandible, morphological changes of the soft tissue, and occlusal changes, which also compromise the temporomandibular joint and mandibular function. Skeletal Class Ⅲ malocclusion is common in patients with mandibular deviation. Early treatment is needed; however, the treatment methods vary. The correct evaluation of the morphological changes of soft and hard tissues leading to facial asymmetry is the premise of treatment. Orthodontic and orthognathic treatment (combined with soft tissue repair when necessary) is an effective method for the treatment of skeletal class Ⅲ malocclusion with mandibular deviation. In addition, there is a close relationship between mandibular deviation and TMD, which needs to be fully considered in the design of treatment.