Effect of a Dose-Dependent Administration of Binge Alcohol on the Mandible in the Adolescent Sprague Dawley Rat / Efecto de una Administración Dosis-Dependiente de Alcohol en Exceso en la Mandíbula de la Rata Sprague Dawley Adolescente

SUMMARY: Binge drinking in adolescents has a negative effect on the developing skeleton and the attainment of peak bone mass. Our study aimed to examine the effect of binge drinking on the growth and functional integrity of the adolescent Sprague Dawley rat mandible and to determine if a dosage of 1.5 g/kg is sufficient to produce a binge-model of consumption. A total of eight 7-week-old adolescent (male) Sprague Dawley rats were randomly placed into 4 groups with two rats each: 1-week alcohol-exposed rats, 1-week pair- fed control rats, 4-week alcohol-exposed rats and 4-week pair-fed control rats. The alcohol exposed groups were administered a single daily dose via oral gavage of 1.5 g/kg of 20 % alcohol 3 days a week (alternate days) for 7 or 28 days. The pair-fed control groups were administered a caloric equivalent dose of maltose dextrin via oral gavage on the same days as the alcohol-exposed rats. The one-week alcohol exposed, and control rats were terminated on day 7 and the four-week alcohol exposed and control rats on day 28. The mandibles were dissected out and osteometric measurements determined using a digital vernier caliper. Bones were scanned using a 3D-microCT scanner (Nikon XTH 255L). Biomechanical tests were done using a Shimadzu universal testing machine. Differences observed were regarding mandibular osteometry, which showed a reduced height in the central portion of the alveolar bone (Al'-Me), and an increase in the height of the condylar head (Cd-Ag) in the 1-week alcohol-exposed rats when compared to the 1-week pair-fed control rats. No other differences were noted. Lack of significant changes seen between the alcohol and pair-fed control groups in both acute binge and chronic binge exposed rats is likely due to the low dose of alcohol administered to the rats in the study thus a higher dose is proposed.

El consumo excesivo de alcohol en adolescentes tiene un efecto negativo en el desarrollo del esqueleto y en la consecución de la masa ósea máxima. Nuestro estudio tuvo como objetivo examinar el efecto del consumo excesivo de alcohol sobre el crecimiento y la integridad funcional de la mandíbula de la rata adolescente Sprague Dawley y determinar si una dosis de 1,5 g/kg es suficiente para producir un modelo de consumo compulsivo. Un total de ocho ratas Sprague Dawley adolescentes (machos) de 7 semanas de edad se colocaron aleatoriamente en 4 grupos con dos ratas cada uno: ratas expuestas al alcohol durante 1 semana, ratas de control alimentadas en parejas durante 1 semana, ratas expuestas al alcohol durante 4 semanas, y ratas de control alimentadas en parejas durante 4 semanas. A los grupos expuestos al alcohol se les administró una dosis única diaria mediante sonda oral de 1,5 g/kg de alcohol al 20 % 3 días a la semana (días alternos) durante 7 o 28 días. A los grupos de control alimentados por parejas se les administró una dosis calórica equivalente de maltosa dextrina mediante sonda oral los mismos días que a las ratas expuestas al alcohol. Las ratas expuestas al alcohol durante una semana, las ratas de control al día 7, las ratas expuestas al alcohol durante cuatro semanas y las ratas de control al día 28. Se diseccionaron las mandíbulas y se determinaron las mediciones osteométricas utilizando un calibre vernier digital. Los huesos se escanearon utilizando un escáner 3D-microCT (Nikon XTH 255L). Las pruebas biomecánicas se realizaron utilizando una máquina de pruebas universal Shimadzu. Las diferencias observadas se relacionaron con la osteometría mandibular, que mostró una altura reducida en la porción central del hueso alveolar (Al'-Me) y un aumento en la altura de la cabeza condilar (Cd-Ag) en las ratas expuestas al alcohol durante una semana, en comparación con las ratas control alimentadas en parejas durante una semana. No se observaron otras diferencias. La falta de diferencias significativas entre los grupos de alcohol y de control alimentados en parejas expuestas a ebriedad aguda y ebriedad crónica, probablemente se deba a la baja dosis de alcohol administrada a las ratas en el estudio, por lo que se propone una dosis más alta.

Efectos de la mastectomía en los parámetros baropodométricos de pacientes con cáncer de seno / The effect of mastectomy on baropodometric parameters for breast cancer patients / Efeitos da mastectomia nos parâmetros baropodometricos de pacientes com câncer de mama

Objetivo: la mastectomía posterior al cáncer de seno produce diversas alteraciones posturales y biomecánicas en el plano frontal y sagital. Dichos cambios conducen a una cinemática alterada de la columna vertebral, desequilibrio muscular y alteración del soporte del peso del pie. Este estudio pretende describir las alteraciones de la baropodometría después de la mastectomía, con base en análisis baropodométricos de la presión media y la carga estática. Metodología: se realizó un estudio descriptivo correlacional. Las propiedades de carga del pie se identificaron en 17 mujeres mastectomizadas. Se utilizó una placa de presión Ecosanit Foot para medir la carga del pie en posición anatómica y con los pies juntos. Resultados: en el estudio participaron 17 mujeres mastectomizadas con una edad media de 54.16 años. Las pacientes reportaron una presión media significativamente mayor en la posición anatómica del lado dominante mastectomizado en comparación con el lado no dominante mastectomizado (227.2 ± 22.16 vs. 175.6 ± 14.95, p =0.05). No hubo diferencia significativa para la carga estática entre el lado dominante mastectomizado y el lado no dominante mastectomizado en la posición anatómica (52.43±4.069 vs. 49.69 ± 4.094, de forma respectiva). Conclusión: los resultados actuales de nuestro estudio evidenciaron la distribución desequilibrada del peso (vector carga en el pie) en pacientes después de la mastectomía. Por tanto, en este texto se describen las alteraciones posturales, musculares, y el desequilibrio estático y dinámico en pacientes con cáncer de seno.

Objective: mastectomy after breast cancer produces several postural and biomechanical alterations in the frontal and sagittal plane. Such changes lead to disturbed kinematics of the spine, muscle imbalance and altered foot weight bearing. This study aims to describe body balance alterations after mastectomy based on the baropodometric analysis of their mean pressure and static load. Methodology: a descriptive correlational research was carried out. Foot weight-bearing properties were identified in 17 patients who have undergone a mastectomy. An Ecosanit Foot pressure plate was used to measure foot load at anatomical position and keeping the feet together. Results: 17 female patients who had undergo mastectomy with a mean age of 54.16 years took part on the research. Patients who have had a dominant-side mastectomy demonstrated significant greater mean pressure at anatomical position when compared to those patients who have had a non-dominant side mastectomy (227.2 ± 22.16 versus 175.6 ± 14.95, p =0.05). There was no significant difference for static load between the patients who have had a dominant side mastectomy and patients who have had a non dominant side mastectomy at anatomical position (52.43 ± 4.069 versus 49.69 ± 4.094, respectively). Conclusion: the current results of our research showed the unbalanced weight distribution in patients after mastectomy. Consequently, it describes the postural and muscular alterations, and the static and dynamic imbalance in breast cancer patients.

Objetivo: A mastectomia após câncer de mama produz diversas alterações posturais e biomecânicas nos planos frontal e sagital. Tais mudanças levam a alteração da cinemática da coluna, desequilíbrio muscular e alteração do suporte de peso do pé. Este estudo tem como objetivo descrever as alterações baropodométricas após mastectomia, com base em análises baropodométricas de pressão média e carga estática. Metodologia: foi realizado estudo correlacional descritivo. Propriedades de carga nos pés foram identificadas em 17 mulheres mastectomizadas. Uma placa de pressão Ecosanit Foot foi usada para medir a carga do pé em posição anatômica e com os pés juntos. Resultados: participaram do estudo 17 mulheres mastectomizadas com idade média de 54,16 anos. Os pacientes relataram uma pressão média significativamente maior na posição anatômica do lado mastectomizado dominante em comparação ao lado mastectomizado não dominante (227,2 ± 22,16 vs. 175,6 ± 14,95, p =0,05). Não houve diferença significativa para a carga estática entre o lado mastectomizado dominante e o lado mastectomizado não dominante na posição anatômica (52,43 ± 4,069 vs. 49,69 ± 4,094, respectivamente). Conclusão: Os resultados atuais do nosso estudo mostraram distribuição de peso desequilibrada (carga vetorial no pé) em pacientes após mastectomia. Portanto, este texto descreve alterações posturais, musculares e desequilíbrio estático e dinâmico em pacientes com câncer de mama.

Effects of kinesio taping on the biomechanical characteristics of the lower limbs during side-step cutting / 中国组织工程研究

BACKGROUND:Kinesio taping has been widely used as a means of sports protection,but its role as a means to correct abnormal biomechanical changes of the lower limbs during side-step cutting remains unclear. OBJECTIVE:To analyze and compare the changes in lower limb kinematics and dynamics when the subjects complete the side-step cutting of the knee joint under the conditions of kinesio taping,placebo taping and blank control. METHODS:Thirty-nine male college students majoring in basketball were recruited as subjects.Each subject was tested with kinesio taping,placebo taping or no taping.The mechanical correction method was used to patch the dominant knee joint of each subject.The run-up speed of 4.5-5.5 m/s was selected to complete the 45° side-step cutting motion,and the kinematics and kinetics data were collected synchronously by the three-dimensional dynamic capture system and the force measuring platform.The kinematics and kinetics parameters at the moment of initial touchdown and peak ground reaction force were selected for data analysis.SPSS 27.0 software was used for statistical analysis of the test data. RESULTS AND CONCLUSION:Kinematic indexes:compared with no taping and placebo taping,the hip abduction and knee valgus angles at the initial touchdown moment were significantly decreased when kinesio taping was used(P<0.05);at the moment of peak lateral ground reaction force,the angles of hip abduction,knee valgus and ankle plantar flexion decreased significantly(P<0.05),and the knee flexion angle was significantly increased(P<0.05).Kinetic indexes:Compared with no taping,both kinesio taping and placebo taping significantly reduced hip abduction and external rotation torque,knee valgus and external rotation torque at the moment of initial touchdown(P<0.05),and significantly reduced peak vertical ground reaction force and peak horizontal backward ground reaction force(P<0.05);in addition,kinesio taping significantly reduced peak lateral ground reaction force compared with no taping and placebo taping(P<0.05).These results indicate that kinesio taping of the knee joint may improve some kinematic and kinetic indexes associated with lower limb injury risk factors during the completion of the side-step cutting in basketball specialized college students to some extent,and may have a positive effect on the prevention of injury during the side-step cutting.In addition,the trends in the effects of placebo taping and kinesio taping on the knee joint are more consistent in terms of changes in some indexes,suggesting that there may be a placebo effect on the mechanism of action of kinesio taping.

Effect of sagittal overcorrection design on displacement and stress of mandibular anterior teeth intrusion using clear aligners / 中国组织工程研究

BACKGROUND:The thin alveolar bone in the lower anterior region increases the risk of labial bone resorption when intruding the teeth with clear aligners.The effect of sagittal overcorrection design on the labiolingual control of mandibular anterior teeth intrusion has not been fully investigated. OBJECTIVE:To explore the effect of overcorrection on the changes in the displacement and stress of the mandibular anterior teeth,especially the cervical and apical regions. METHODS:Through a male volunteer cone-beam CT data,the three-dimensional reconstruction of the mandible and teeth was conducted in the MIMICS and GEOMAGIC software.Moreover,the models of periodontal ligaments,attachments,and appliances were created in the SOLIDWORKS software.First,the study was divided into canine intrusion group and incisor intrusion group.Then,the overcorrection(0°,1°,2°)was designed on the bilateral mandibular central and lateral incisors.A total of six models were established.The models were assembled and imported into the ANSYS software to analyze and calculate the displacement and stress level. RESULTS AND CONCLUSION:(1)In the canine intrusion group,canines intruded and tipped lingually while incisors extruded and tipped lingually.In the incisor intrusion group,canines extruded and tipped lingually while incisors intruded and tipped lingually.(2)Without overcorrection,the incisors necks moved lingually while apexes moved labially.With overcorrection,the incisors tended to be upright,followed by labial tilt.The least cervical and apical displacements were detected under 1° overcorrection.(3)With overcorrection,the incisal cervical stress concentration area shifted from labial to lingual in the canine intrusion group,whereas the stress concentration area shifted from lingual to labial in the incisor intrusion group.(4)The incisors tended to tilt lingually when intruding the mandibular anterior teeth with clear aligners.The sagittal overcorrection design was conductive to maintain the stable position of incisors.However,the amount of overcorrection should be moderate.Excessive overcorrection might increase the labial inclination tendencies of incisors.

Research progress in the effect of estrogen on tendinopathy / 中国组织工程研究

BACKGROUND:Increasing studies have found that estrogen has a certain correlation with tendinopathy,but for a long time,there are few experiments and summaries of estrogen in tendinopathy,which makes it difficult for specialists and scholars in related fields to fully understand the research status. OBJECTIVE:To summarize the current clinical or preclinical original research,so as to summarize the role of estrogen in tendinosis,and make a certain prospect for the evaluation and management of estrogen in tendinosis in the future. METHODS:Relevant literature in PubMed,Web of Science,CNKI,WanFang,and VIP databases were searched by computer.Search time was from January 2008 to September 2023.The search terms were"oestrogen,estrogen,estrogen receptor,tendinopathy,tendonopathy,sinew,tendon,tendons,myotenositis"in English and"estrogen,estrogen receptor,tendinosis,tendon,tendinitis"in Chinese.According to the selection criteria,the search results were screened and excluded,and finally 60 documents were included for review and analysis. RESULTS AND CONCLUSION:In vivo studies have shown that estrogen can promote tendon anabolism.In vitro experiments have also proved that various estrogens can promote the proliferation of tendon cells and reduce inflammation and apoptosis,but most of the experiments are limited to animal models.Estrogen receptor β acts more in tendon injury and repair processes,but estrogen receptor α has not been found to have a major impact on tendon injury.The expression of estrogen receptor β can repair the tendon by affecting the formation of fat,the deposition of type I collagen and reducing the apoptosis of tendon cells,while its over-expression may promote inflammation and angiogenesis,thus promoting the inflammatory process and playing a role in tendon injury.Animal studies have shown that estrogen deficiency may reduce the synthesis efficiency of collagen in the tendon,decrease the elasticity of tendon,inhibit the synthesis and metabolism of the tendon,which is not conducive to the repair of tendon injury,while normal level of estrogen may stimulate the synthesis of type I collagen in tendon and promote the proliferation and metabolism of tendon cells.At present,the molecular mechanism of estrogen in tendon injury has not been fully explained.More experiments focus on tendon collagen synthesis,cell proliferation and apoptosis.Only a few documents have studied the molecular mechanisms of estrogen receptor β deficiency regulating interferon regulatory factor 5-chemokine ligand 3 axis,E2 regulating estrogen receptor α and PI-3K-Akt signaling pathways,and high levels of estradiol reducing the level of free-circulating insulin-like growth factor.Various estrogens,including endogenous estrogens and phytoestrogens,are beneficial to the repair of tendinopathy at normal levels,and estrogen receptor β mainly affects the formation of fat,the deposition of type I collagen and the reduction of apoptosis of tendon cells through,which lays a foundation for the future treatment of tendinopathy with different subtypes of estrogens in vivo and the influence of estrogen membrane receptors on tendinopathy.

Correlation of corneal biomechanical changes with corneal volume changes and high-order aberration changes in the early stage after small incision lent-icule extraction / 眼科新进展

Objective To observe the corneal biomechanical changes of patients in the early stage after small inci-sion lenticule extraction(SMILE),and to analyze the correlation between the corneal biomechanical changes and changes in corneal volumes and higher-order aberrations.Methods A total of 72 patients(72 eyes)with myopia or myopic astig-matism who were scheduled for SMILE in the Optometric Center of Second People's Hospital of Foshan from January to August 2021 were included.The right eye was selected for observation.Before and 3 months after the SMILE,novel corne-al biomechanical parameters,such as biomechanical intraocular pressure(bIOP),DA ratiomax(2 mm)(DA2 ratio),inte-grated radius(IR),Ambrósio's relational thickness(for evaluation of the morphology and quality of the cornea,ARTh),stiffness parameter applanation 1(SP-A1),Corvis biomechanical index(CBI)and stress-strain index(SSI),were meas-ured by the new generation of Corvis? ST.The Pentacam anterior segment analysis system was used to measure corneal bi-omechanical parameters,including corneal volume(CV3 mm,CV5 mm,CV7 mm and CV10 mm);total root mean square of whole cornea,anterior and posterior corneal surface[RMS(Cornea,CF,CB)];root mean square of high-order aberrations of total cornea,anterior and posterior corneal surface[RMS HOA(Cornea,CF,CB)].Paired t-test or Wilcoxon singed-rank test was used to compare the changes in parameters before and after SMILE.Spearman correlation analysis and partial least squares regression were used to study the correlation between changes in novel corneal biomechanical parameters with cor-neal volume changes and high-order corneal aberration changes after the SMILE.Results Three months after SMILE,the bIOP,ARTh,SP-A1 and SSI decreased significantly,while the DA2 ratio,IR and CBI increased significantly(all P＜0.05).Three months after SMILE,CV3 mm,CV5 mm,CV7 mm and CV10 mm decreased significantly(all P＜0.05).The corneal volume changes from small to large were CV3 mm,CV5 mm,CV7 mm and CV10 mm,with a maximum decrease in the outmost periphery.The RMS(Cornea,CF,CB)and RMS HOA(Cornea,CF,CB)increased significantly(all P＜0.05);compared with the changes in high-order aberration on the anterior corneal surface,the changes in higher-order aberration on the posterior corneal surface were relatively stable.Correlation analysis shows that △ARTh was positively correlated with △CV3mm and△CV5mm,and negatively correlated with △CV10mm(all P＜0.05);△bIOP was negatively correlated with △CV3mm,△CV5mm,△RMS HOA(CF)and △RMS HOA(Cornea)and positively correlated with △CV10mm(all P＜0.05);△IR was negatively correlated with △CV10 mm(P＜0.05);△SP-A1 was positively correlated with △CV10 mm(P＜0.05);△ CBI was negatively correlated with △CV3 mm and △CV5 mm,and positively correlated with △CV10mmand △RMS(CF)(all P＜0.05).Conclusion The changes in corneal biomechanical parameters occur in the early stage after SMILE,with a certain corre-lation with the corneal volume changes in different regions and high-order corneal aberration changes.

Status of wearable flexible monitoring devices based on organic field effect transistors in biomedical field / 医疗卫生装备

The working principle and development of flexible semiconductor devices based on organic field effect transistor(OFET)technology were introduced.The current research status of OFET-based wearable flexible monitoring devices were reviewed,including biomechanical monitoring devices,tattoo biomonitoring devices and cellular detection devices and etc.The deficiencies of OFET-based wearable flexible monitoring devices were analyzed,and it's pointed out that miniaturization,personalization and diversification were the directions for the development of the future OFET-based wearable flexible moni-toring devices.[Chinese Medical Equipment Journal,2024,45(1):93-100]

Analyzing the morphologic characteristics of pedicle-facet joints in lumbar spondylolysis: correlation with spinopelvic parameters and its clinical relevance / 中华骨科杂志

Objective:To delineate the morphological features of pedicle-facet joints in lumbar spondylolysis patients, correlating these with spinopelvic parameters to explore their mechanisms and clinical implications.Methods:This study enrolled 121 patients with L 5 spondylolysis (IS group), 108 with L 4, 5 degenerative spondylolisthesis (DS group), and 100 with normal L 4, 5 but L 5S 1 lumbar disc herniation (NL group), who underwent radiography and multislice spiral CT from May 2020 to January 2023. Parameters including vertebral slip percentage (SP) and spinopelvic alignments, such as sacral slope and lumbar lordosis, were quantified using standing lateral lumbar radiographs. Morphological parameters of the L 4 and L 5 facet joints were measured on 3D reconstructed lumbar CT images, including the facet joint angle (FJA), pedicle-facet joint angle (PFA), facet joint osteoarthritis (OA), and facet joint tropism (FT). Results:The analysis revealed significant variances in SS and LL among the groups ( F=21.910, P<0.001; F=22.439, P<0.001). The IS group exhibited the highest SS and LL, followed by the DS and NL groups. Morphological assessments showed the largest L 4 FJA in the IS group, with progressive decreases in the DS and NL groups ( F=344.791, P<0.001). Conversely, L 4 PFA was greatest in the DS group ( F=193.725, P<0.001). Notably, L 4 OA was markedly more severe in the DS group compared to IS and NL groups ( H=467.925, P<0.001), with no significant disparity between IS and NL groups ( P>0.05). Correlation analyses within each cohort highlighted a negative association of sacral slope and lumbar lordosis with facet joint angles, yet a positive correlation with pedicle-facet joint angles both with statistical significance ( P<0.05). Furthermore, L 4 facet joint angles were consistently smaller than those at L 5, and L 4 pedicle-facet joint angles were larger than L 5 ( P<0.05). Osteoarthritis at L 5 was more pronounced in the IS group compared to L 4 ( Z=7.043, P<0.001), a trend inversely observed in the DS group ( Z=11.868, P<0.001), while the NL group showed no significant osteoarthritic variance between levels ( Z=0.556, P=0.578). Conclusion:Patients with lumbar spondylolysis demonstrate elevated sacral slope and lumbar lordosis, indicative of increased localized biomechanical stress in the lumbar spine. These alterations in the morphology of the pedicle-facet joints highlight the distinctive structural adaptations and potential strain distributions within this cohort.

Evaluation of pain,functional activity,and plantar pressure in the treatment of plantar fasciitis with Ki-nesio taping combined with extra corporeal shack wave therapy / 中国康复医学杂志

Objective:To explore the clinical efficacy of Kinesio taping combined with extracorporeal shock wave and the plantar pressure evaluation in the treatment of plantar fasciitis. Method:A total of 67 patients with unilateral plantar fasciitis were randomly divided into the control group(ESWT group)and the experimental group(KT combined group).The patients in the two groups were given the same health education and extracorporeal shock wave treatment(ESWT),and the experimental group was treated with Kinesio taping(KT).The pain and functional activity were evaluated by pain visual analogue scale and AOFAS ankle and hind-foot function scale;The insole plantar pressure measuring system was used to mea-sure the peak pressure values of each plantar regions.The clinical efficacy and plantar pressure of the affected side were compared before treatment,the 3rd week of treatment and 5th week of treatment. Result:There was no significant difference in various indcators of the measurements between the two groups before treatment(P＞0.05).The score of pain rating,functional activity scale score and plantar pressure of pa-tients in both groups were significantly improved at the 3rd week and the 5th week of treatment(P＜0.05),com-pared with those before treatment.At the 3rd week of treatment,there was no significant difference between the two groups in pain degree and functional activity scale score(P＞0.05),but there was statistical difference in plantar pressure analysis(P＜0.05).The peak force weight ratio of the medial heel in the KT combined group was significantly greater than that in the control group.At the 5th week of treatment,there were statisti-cally significant differences between the two groups in the score of pain rating,functional activity scale score and plantar pressure(P＜0.05).The KT combined treatment group was significantly better than the control group in the pain improvement and functional activity,and the weight bearing of the middle foot and hind foot was also significantly higher than the control group. Conclusion:Compared with the simple extracorporeal shock wave therapy,the combination of KT therapy can better relieve pain,improve the function of hind foot,correct abnormal foot weight bearing,and improve the gait of patients.

Assessing the effect of prophylactic ankle taping on ankle and knee biomechanics during landing tasks in healthy individuals: A cross-sectional observational study

ABSTRACT BACKGROUND: Current research supports the fact that prophylactic ankle taping (AT) is effective in preventing ankle injuries in amateur and elite sports athletes. OBJECTIVE: This study aimed to investigate the effect of AT on balance, knee valgus during drop jump and single-leg countermovement jump (SL-CMJ) landings, and ankle range of motion (ROM) restriction in healthy participants. DESIGN AND SETTING: A cross-sectional observational study was conducted at the Universidad Europea de Madrid, Madrid, Spain. METHODS: Participants: Thirty-nine healthy individuals participated in this study and performed the movements under two conditions (with and without tape). Outcome measurements: ankle ROM, balance, SL-CMJ height, flight time, ground time, and knee valgus. Before any intervention, a random process was developed with a 1:1 allocation ratio, and the participants were assigned to groups A (tape-no tape) and B (no tape-tape). RESULTS: Significant differences between tape and no-tape moments were observed for drop jump knee valgus flexion (P = 0.007), with an increase in knee valgus in participants with ankle taping. Similarly, the Y-balance testshowed a significant decrease in all variables (P = 0.001 and), ankle dorsiflexion (P = 0.001) in participants with ankle taping. CONCLUSIONS: AT is effective for immediate ankle ROM restriction. However, an increase in knee valgus during drop jump task and a decrease in lower limb balance were observed during drop jump task. Based on these results, it can be concluded that AT application in healthy individuals should not be recommended as it results in increase in injury risk factors.

Functional tests and isokinetic knee assessment in street runner athletes correlation / Correlación entre pruebas funcionales y evaluación isokinética de rodilla en practicantes de carrera de calle / Correlação entre testes funcionais e avaliação isocinética do joelho em atletas corredores de rua

ABSTRACT Introduction: The assessment of biomechanical changes related to the lower limbs is necessary in clinical practice to measure the potential risks of injury and the influences on existing dysfunction. Biomechanical changes related to previous ankle injuries are known to influence the performance of the entire lower limb. Objective: The aim of this study was to correlate muscle strength tests, performance tests and ankle stability with the Single Hop Test (SHT). Methods: 82 amateur runners were evaluated with isokinetic tests of quadriceps and hamstring muscle strength, as well as Y Balance Test (YBT), Weight-bearing Lung Test (WBLT), and the SHT. Results: The results showed there was a significant correlation between the SHT and the YBT in subjects with hamstring/quadriceps ratio (I/Q ratio) <0.55, and the length of the unilateral SHT with the peak torque of ipsilateral knee extensors. Conclusion: The study was successful in correlating the functional tests in question with the results obtained in isokinetic dynamometry. Level of Evidence V; Cross-Sectional Study.

RESUMEN Introducción: La evaluación de los cambios biomecánicos relacionados con las extremidades inferiores es necesaria en la práctica clínica para medir los riesgos potenciales de lesión y las influencias sobre la disfunción existente. Se sabe que los cambios biomecánicos relacionados con lesiones previas de tobillo influyen en el rendimiento de toda la extremidad inferior. Objetivo: Correlacionar las pruebas de fuerza muscular, las pruebas de rendimiento y la estabilidad del tobillo con la prueba de salto simple (Single Hop Test, SHT). Métodos: Se evaluó a 82 corredores aficionados con pruebas isocinéticas de fuerza muscular de cuádriceps e isquiotibiales, además de pruebas como Y Balance Test (YBT), Weight-bearing Lung Test (WBLT) y la prueba SHT. Resultados: Los resultados mostraron que existía una correlación significativa entre el SHT y el YBT en sujetos con ratio isquiotibiales/cuádriceps (ratio I/Q) <0,55, y la longitud del SHT unilateral con el par máximo de los extensores de la rodilla ipsilateral. Conclusión: El estudio logró correlacionar las pruebas funcionales en cuestión con los resultados obtenidos en la dinamometría isocinética. Nivel de Evidencia V; Estudio Transversal.

RESUMO Introdução: A avaliação de alterações biomecânicas relacionadas aos membros inferiores é necessária na prática clínica para mensurar os riscos potenciais de alguma lesão e as influencias sobre uma disfunção existente. As alterações biomecânicas relacionadas a lesões prévias de tornozelo são conhecidas pela influência na performance de todo o membro inferior. Objetivo: Correlacionar testes de força muscular, testes de performance e estabilidade do tornozelo com o teste de salto simples (Single Hop Test - SHT). Métodos: Foram avaliados 82 corredores amadores com testes isocinéticos de força muscular de quadríceps e isquiotibiais, além de testes Y Balance Test (YBT), Weight-bearing Lung Test (WBLT), e o SHT. Resultados: Os resultados demonstraram haver correlação significativa entre o SHT e o YBT nos indivíduos com relação Isquiotibiais/Quadríceps (relação I/Q) <0,55, e o comprimento do SHT unilateral com o pico de torque de extensores de joelho ipsilateral. Conclusão: O estudo foi bem sucedido em correlacionar os testes funcionais em questão com os resultados obtidos na dinamometria isocinética. Nível de Evidência V; Estudo Transversal.

Sport biomechanics before and after the rio 2016 paralympic games / Biomecánica del deporte antes y después de los juegos paralímpicos rio 2016 / Biomecânica do esporte antes e depois dos jogos paralimpícos rio 2016

ABSTRACT Introduction: Events such as the Paralympic Games leave a series of legacies in the host societies. This is also applicable to the development of associated scientific knowledge, particularly in the field of sports biomechanics. Objective: The objective of this study is to investigate the Brazilian scientific production in the field of biomechanics in Paralympic sports during the cycle that preceded and followed the Rio 2016 Paralympic Games. Additionally, the study aims to provide insights for future research endeavors. Methods: The search was conducted on the Lattes Platform, utilizing the filters "Assunto" and "Doutores" and the keywords "Paralímpico" and "Paralympic." In total, 723 authors were identified who published articles related to the topic. Subsequently, the curricula were accessed, and the articles were sorted and identified, resulting in 37 articles that met all inclusion criteria. Results: The results indicate that: a) Brazil witnessed an increase in the number of publications after London 2012; b) The majority of these productions (87%) originate from Public Institutions; c) There was a greater participation of other regions of Brazil in the production of knowledge in the area after Rio 2016; d) Individual modalities such as powerlifting and athletics were the most researched, despite Brazil's reference status in some collective modalities; e) Women remain a minority, both as participants in research and as authors of publications; f) The productions demonstrate high levels of quality; g) The most commonly used research techniques in biomechanics were kinematics and dynamometry. Conclusion: The field of biomechanics in Paralympic sports has significantly benefited from the legacy generated by the Rio 2016 Paralympics. As future challenges for researchers, the following aspects stand out: maintaining the quality of productions, expanding studies to include collective modalities, increasing the participation of other federated entities in the production of knowledge in this field, promoting greater gender equity, and incorporating new research techniques in biomechanics. Level of Evidence II; Review Study.

RESUMEN Introducción: Eventos como los Juegos Paralímpicos dejan una serie de legados en las sociedades anfitrionas. Esto también es aplicable al desarrollo de conocimiento científico asociado, especialmente en el campo de la biomecánica deportiva. Objetivo: El objetivo de este estudio es investigar la producción científica brasileña en el campo de la biomecánica en deportes paralímpicos durante el ciclo que precedió y siguió a los Juegos Paralímpicos de Río 2016. Además, el estudio tiene como propósito brindar ideas para futuros esfuerzos de investigación. Métodos: La búsqueda se realizó en la Plataforma Lattes, utilizando los filtros " Assunto " y "Doutores" y las palabras clave "Paralímpico" y "Paralympic". En total, se identificaron 723 autores que publicaron artículos relacionados con el tema. Posteriormente, se accedió a los currículos y se clasificaron e identificaron los artículos, lo que resultó en 37 artículos que cumplieron con todos los criterios de inclusión. Resultados: Los resultados indican que: a) Brasil experimentó un aumento en el número de publicaciones después de Londres 2012; b) La mayoría de estas producciones (87%) provienen de Instituciones Públicas; c) Después de Río 2016, hubo una mayor participación de otras regiones de Brasil en la producción de conocimiento en el área; d) Las modalidades individuales, como levantamiento de pesas y atletismo, fueron las más investigadas, a pesar del estatus de referencia de Brasil en algunas modalidades colectivas; e) Las mujeres siguen siendo una minoría, tanto como participantes en investigaciones como autoras de publicaciones; f) Las producciones demuestran altos niveles de calidad; g) Las técnicas de investigación más utilizadas en biomecánica fueron la cinemática y la dinamometría. Conclusión: El campo de la biomecánica en deportes paralímpicos ha sido significativamente beneficiado por el legado generado por los Juegos Paralímpicos de Río 2016. Como desafíos futuros para los investigadores, se destacan los siguientes aspectos: mantener la calidad de las producciones, ampliar los estudios para incluir modalidades colectivas, aumentar la participación de otras entidades federadas en la producción del conocimiento en este campo, promover una mayor equidad de género e incorporar nuevas técnicas de investigación en biomecánica. Nivel de Evidencia II; Estudio de Revisión.

RESUMO Introdução: Eventos como os Jogos Paralímpicos deixam uma série de legados nas sociedades que as sediam. Não seria diferente quando se trata do desenvolvimento do conhecimento científico associado, em especial a biomecânica do esporte. Objetivo: Investigar a produção científica brasileira produzida em biomecânica no esporte paralímpico no ciclo que antecedeu e sucedeu os Jogos Paralímpicos Rio 2016, além de fornecer insights para novos estudos. Métodos: Foram realizadas buscas na Plataforma Lattes, sendo habilitados os filtros "Assunto" e "Doutores", com as palavras-chave "Paralímpico" e "Paralympic". Ao todo, foram encontrados 723 autores que publicaram artigo(s) relacionado(s) com o tema. Após acessar os currículos, os artigos foram triados e identificados, resultando em 37 artigos que preencheram todos os critérios de inclusão. Resultados: Os resultados mostram que a) Após Londres-2012, o Brasil tem aumentado o número de publicações; b) Grande parte das produções (87%) são oriundas de Instituições Públicas, c) Após Rio-2016 houve uma maior participação de outras regiões do Brasil na produção do conhecimento na área, d) Apesar do Brasil ser referência em algumas modalidades coletivas, modalidades individuais como o powerlifting e o atletismo, são as mais pesquisadas, e) Mulheres ainda são minoria, tanto como participantes das pesquisas quanto na autoria das publicações, f) As produções atingem elevados extratos de qualidade, g) As técnicas de pesquisa em biomecânica mais utilizadas foram a cinemática e dinamometria. Conclusão: A biomecânica no esporte paralímpico tem se valido do legado gerado pelas paralimpíadas Rio-2016. Como desafios futuros para os pesquisadores, destacam-se: manutenção da qualidade das produções, ampliação dos estudos para as modalidades coletivas, aumento da participação de outros entes federados na produção do conhecimento na área, promoção de uma maior equidade de gênero e incorporação de novas técnicas de pesquisa em biomecânica. Nível de Evidência II; Estudo de Revisão.

Bone Regenerate Evaluation MethodsMétodos de avaliação do regenerado ósseo / Métodos de avaliação do regenerado ósseoBone Regenerate Evaluation Methods

Abstract Since its introduction by Ilizarov, the distraction osteogenesis technique has been used to treat trauma-related conditions, infections, bone tumors, and congenital diseases, either as methods of bone transport or elongation. One of the major dilemmas for the orthopedic surgeon who performs osteogenic distraction is establishing a reproducible method of assessing the progression of the osteogenesis, enabling the early detection of regenerate failures,inorder toeffectively interfereduring treatment, andtodeterminetheappropriate time to remove the external fixator. Several quantitative monitoring methods to evaluate the structural recovery and biomechanical properties of the bone regenerate at different stages,aswell as the bone healing process, are under study. These methods can reveal data on bone metabolism, stiffness, bone mineral content, and bone mineral density. The present review comprehensively summarizes the most recent techniques to assess bone healing during osteogenic distraction, including conventional radiography and pixel values in digital radiology, ultrasonography, bone densitometry and scintigraphy, quantitative computed tomography, biomechanical evaluation, biochemical markers, and mathematical models. We believe it is crucial to know the different methods currently available, and we understand that using several monitoring methods simultaneously can be an ideal solution, pointing to a future direction in the follow-up of osteogenic distraction.

Resumo Desde que foi descrita por Ilizarov, a técnica de osteogênese por distração tem sido utilizada para o tratamento de diversas condições relacionadas ao trauma, infecções, tumores ósseos edoenças congênitas, naforma detransporteou alongamento ósseo. Um dos dilemas mais comuns do cirurgião ortopédico que realiza distração osteogênica é o estabelecimentodeum método reprodutível deverificaçãoda progressão da osteogênese, que permita a detecção precoce de falhas no regenerado, para que se possa interferir de formaeficazduranteotratamento,bemcomodeterminarotempoapropriadoderemoção dofixadorexterno.Recentemente,váriosmétodosdemonitoramentoquantitativo,comos quais se poderia avaliar a recuperação da estrutura e as propriedades biomecânicas do regenerado ósseoemdiferentes estágios, alémdoprocessodecicatrização óssea, têm sido amplamente investigados. Por esses métodos, pode-se saber o conteúdo mineral ósseo, a densidade mineral óssea, a rigidez e o metabolismo ósseo. Nesta revisão, resumimos de forma abrangente as técnicas mais recentes para avaliar a cicatrização óssea durante a distração osteogênica, entre elas, métodos como aradiografia convencional e os valores de pixels em radiologia digital, a ultrassonografia, a densitometria e a cintilografia ósseas, a tomografia computadorizada quantitativa, a avaliação biomecânica, os marcadores bioquímicos e os modelos matemáticos. Consideramos fundamental o conhecimento dos diversos métodos à disposição atualmente e entendemos que a utilização de vários métodos de monitoramento simultaneamente possa ser uma solução ideal, que aponte para uma direção futura no seguimento da distração osteogênica.

Must a Knee with Anterior Cruciate Ligament Deficiency and High-grade Pivot Shift Test Present an Increase in Internal Rotation? / Um joelho com deficiência de ligamento cruzado anterior e alto grau no teste de pivot shift deve apresentar aumento de rotação interna?

Abstract Objective: Rupture of the anterior cruciate ligament (ACL) is one of the most common injuries in athletes and is often associated with damage to anterolateral structures. This combination of injuries presents itself clinically as a high-grade pivot shift test. The hypothesis of this study is that patients with ACL deficiency and high-grade pivot shift test should have an increased internal knee rotation. Methods: Twenty-two patients were tested. After effective spinal anesthesia, two tests were performed with the patient in supine position. First, the bilateral pivot shift test was performed manually, and its grade was recorded. Then, with the knee flexed to 90 degrees, the examiner drew the projection of the foot in a neutral position and in maximum internal rotation, and the angle of internal rotation was measured from the axes built between the central point of the heel and the hallux. Results: In the ACL-deficient knee, it was observed that there is a statistically significant average internal rotation (IR) delta of 10.5 degrees between the groups when not adjusted for age, and 10.6 degrees when adjusted for age. Conclusions: Knees with ACL deficiency and with pivot shift test grade I do not show increased internal rotation in relation to knees with intact ACL. Knees with ACL deficiency and with pivot shift test grades II and III show increased internal rotation in comparison to healthy knees.

Resumo Objetivo: A ruptura do ligamento cruzado anterior (LCA) é uma das lesões mais comuns em atletas e está frequentemente associada a danos nas estruturas anterolaterais. Esta combinação de lesões apresenta-se clinicamente como um teste de pivot shift de alto grau. A hipótese deste estudo é que pacientes com deficiência de LCA e teste de pivot shift de alto grau tenham aumento da rotação interna (RI) do joelho. Métodos: Vinte e dois pacientes foram testados. Após raquianestesia efetiva, foram realizados dois testes com o paciente em posição supina. Primeiro, o teste de pivot shift bilateral foi realizado manualmente e seu grau foi registrado. Em seguida, com o joelho flexionado a 90 graus, o examinador traçou a projeção do pé em posição neutra e em RI máxima e mediu o ângulo de RI a partir dos eixos construídos entre o ponto central do calcanhar e o hálux. Resultados: Joelhos com deficiência de LCA apresentam delta da RI média estatisticamente significativo de 10,5 graus entre os grupos sem ajuste de idade e de 10,6 graus com ajuste de idade. Conclusões: Joelhos com deficiência do LCA e teste de pivot shift de grau I não apresentam aumento da RI em relação aos joelhos com LCA íntegro. Joelhos com deficiência do LCA e teste de pivot shift de graus II e III apresentam RI em comparação aos joelhos saudáveis.

Riesgo de Caídas y Parámetros de Marcha en Personas Mayores de la Comunidad: ¿Cuáles son los Indicadores de Función y Disfunción del Movimiento? / Risk of Falls and Gait Parameters in Community Elderly: What Are the Indicators of Movement Function and Dysfunction?

Introducción. La población de personas mayores (PM) en Chile presenta un incremento sostenido con importantes tasas de fragilidad y riesgo de caídas (RC). El desempeño de marcha permite valorarlo mediante parámetros mecánicos y fisiológicos. Nos preguntamos, ¿cuáles podrían ser los más relevantes para estimar RC en condiciones de marcha confortable (MC) y máxima (MM)? Objetivo. Identificar los principales parámetros de marcha que podrían explicar RC en PM autovalentes de la comunidad. Métodos. Estudio observacional y transversal en el cual participaron 53 PM autovalentes de la comuna de Talca, Chile (edad 71±7años; IMC 29,1±3,4 kg/m2). Se solicitó a los participantes la ejecución de MC (n=53) y posteriormente MM (n=36). Ambas modalidades fueron desarrolladas en un circuito elíptico de 40m durante 3min. El RC se categorizó como: "sin riesgo", "riesgo dinámico" según prueba timed up and go (TUG) positiva, "riesgo estático" según estación unipodal (EUP) positiva y "riesgo mixto" con ambas pruebas positivas. Para la visualización de la variación gráfica en el morfoespacio de los individuos según RC, se realizó un análisis de componentes principales (ACP) mediante el Programa RStudio, utilizando 6 variables cinemáticas: i) velocidad promedio de marcha (VPM), ii) cadencia, iii) máximo despeje del pie (MDP), iv) coeficiente de variación (%CV) del MDP, v) longitud de zancada (LZ) y vi) %CV de la LZ. Además de 2 variables fisiológicas: i) % frecuencia cardiaca de reserva utilizada (%FCRu) y ii) el índice de costo fisiológico según la relación entre FC y VM (latidos/metros). Resultados. Para MC las dimensiones del ACP explican el 56% de la variabilidad de los datos, siendo los indicadores de seguridad de RC la VM, cadencia, LZ y MDP. La variabilidad de marcha explica RC mixto y el ICF junto al %FCRu se asocian a RC dinámico. En condiciones de MM, el ACP explica 60% de la variabilidad de datos, donde las PM sin RC se asocian con VM, LZ y MDP. Por su parte, la variabilidad del MDP se vincula con RC dinámico y las variables fisiológicas con el RC mixto. Conclusiones. Los parámetros de marcha que mejor explican una marcha segura y eficiente son cinemáticos de la fase de balanceo, mientras que la variabilidad y el costo fisiológico se asocian como indicadores de RC dinámico y mixto.

Background. Introduction: The elderly population (EP) in Chile is experiencing a sustained increase with significant rates of frailty and risk of falls (RF). Gait performance can be assessed using mechanical and physiological parameters. We wonder, which ones could be the most relevant to estimate RF in self-selected walking speed (SSWS) and maximum walking speed (MWS) conditions? Objective. Identify the main gait parameters that could explain RF in self-sufficient elderly individuals from the community. Methods. This observational and cross-sectional study included 53 self-sufficient elderly individuals from the commune of Talca, Chile (age 71±7 years; BMI 29.1±3.4 kg/m2). Participants were asked to perform SSWS (n=53) and subsequently MWS (n=36). Both modalities were conducted on a 40m elliptical circuit for 3 minutes. RF was categorized as: "no risk," "dynamic risk" based on a positive timed up and go test, "static risk" based on a positive one-legged stance test, and "mixed risk" with both tests positive. To visualize the graphical variation in the morphospace of individuals according to RF, a principal component analysis (PCA) was conducted using RStudio, utilizing 6 kinematic variables: i) walking speed (WS), ii) cadence, iii) maximum foot clearance (MFC), iv) coefficient of variation (%CV) of MFC, v) stride length (SL), and vi) %CV of SL. In addition to 2 physiological variables: i) % of reserve heart rate used (%RHRu) and ii) the physiological cost index based on the relationship between heart rate and WS (heartbeats/meters). Results. For SSWS, the PCA dimensions explained 56% of the data variability, with gait safety indicators such as WS, cadence, SL, and MFC explaining RF. Gait variability explains mixed RF, while the physiological cost index and %RHRu are associated with dynamic RF. In MWS conditions, PCA explains 60% of the data variability, where the elderly persons without RF are associated with WS, SL, and MFC. On the other hand, MFC variability is related to dynamic RF, and physiological variables are associated with mixed RF. Conclusions. The gait parameters that best explain safe and efficient walking are kinematic parameters of the swing phase, while variability and physiological cost are indicators of dynamic and mixed RF.

A novel validation approach shows new, solid reasons why vertical jump height should not be used to predict leg power / Uma nova abordagem de validação acrescenta fortes razões para não usar a altura do salto vertical como um indicador de potência das pernas / Un novedoso enfoque de validación añade sólidas razones para no utilizar la altura del salto vertical como predictor de la potencia de piernas

Abstract Jump height continues to be widely used to predict power in humans. Individual progress is often monitored on the basis of estimated power, but prediction equations are based on group data. The objective of the study was to show that vertical jump performance (vJP) and mechanical power are poorly associated, particularly within individuals. Two experiments are presented. First, 52 physically active male college students performed five maximal vertical jumps each. Second, three young male participants performed 50 maximal jumps each. Participants rested for 1 minute between jumps. vJP was calculated from kinematic data as peak body center of mass (BCOM) minus standing BCOM; peak power (PEAKPWR) was calculated from the vertical ground reaction force registered by a force plate, and average power (MEANPWR) during propulsion from the change in potential energy of BCOM. Regression analyses were performed using standardized vJP scores as the predictor variable and standardized power scores as the resulting variables, expecting an identity function of y = x (intercept = 0, slope = 1) and R2 = 1. In experiment 1, the model for zPEAKPWR R2 = 0.9707 (p < 0.0001) but slope (0.3452) ≠ 1 (p < 0.0001). The model for zMEANPWR R2 = 0.9239 (p < 0.0001); nevertheless, slope (0.4257) ≠ 1 (p < 0.0001). In experiment 2, all individual models for zPEAKPWR and zMEANPWR resulted in poor associations (R2 ≤ 0.21) and slopes ≠ 1 (p≤0.001). In conclusion, regression analysis for individuals, and even for groups, confirms that vJP is a poor predictor of mechanical power.

Resumo A altura do salto ainda é amplamente usada para prever a potência em humanos. O progresso individual é frequentemente monitorado usando a estimativa de potência, mas as equações de previsão são baseadas em dados de grupo. O objetivo do estudo é demonstrar que a altura do salto vertical (ASv) e a potência mecânica têm uma correlação débil, principalmente em um mesmo indivíduo. São apresentados dois experimentos: primeiro, 52 estudantes universitários fisicamente ativos realizaram cinco saltos verticais máximos cada um; segundo, três participantes do sexo masculino realizaram 50 saltos máximos cada um. Os participantes descansaram por 1 minuto entre os saltos. A ASv foi calculada a partir de dados cinemáticos como a posição mais alta do centro de massa corporal (CMC) menos o CMC em pé; a potência de pico (PEAKPWR) foi calculada a partir da força de reação vertical registrada por uma plataforma de força e a potência média (MEANPWR) durante a propulsão a partir da mudança na energia potencial do CMC. As análises de regressão foram realizadas usando os escores da ASv padronizados como variável preditora e os escores de potência padronizados como variáveis de resultado, com a expectativa de obter uma função de identidade y = x (interceptação = 0, inclinação = 1) e R2 = 1. No experimento 1, o modelo para zPEAKPWR produziu R2 = 0,9707(p < 0,0001), mas a inclinação (0,3452) ≠ 1 (p = 8,7x10-15). O modelo para zMEANPWR apresentou R2 = 0,9239 (p < 0,0001); no entanto, a inclinação (0,4257) ≠ 1 (p = 1,15x10-5). No experimento 2, todos os modelos individuais para zPEAKPWR e zMEANPWR apresentaram associações débeis (R2 ≤ 0,21) e inclinações ≠ 1(p ≤ 0,001). Em conclusão, a análise de regressão para indivíduos e até mesmo para grupos confirma que a ASv é um indicador débil da potência mecânica.

Resumen La altura del salto se sigue usando ampliamente para predecir la potencia en seres humanos. El progreso individual, a menudo, se monitorea usando una estimación de la potencia, pero las ecuaciones de predicción se basan en datos grupales. El estudio pretende demostrar que la altura del salto vertical (ASv) y la potencia mecánica tienen una pobre correlación, particularmente en un mismo individuo. Se presentan dos experimentos; primero, 52 estudiantes universitarios físicamente activos ejecutaron cinco saltos verticales máximos cada uno; segundo, tres participantes masculinos ejecutaron 50 saltos máximos cada uno. Los participantes descansaron 1 minuto entre saltos. ASv se calculó a partir de los datos cinemáticos como posición más alta del centro de masa corporal (CDM) menos CDM de pie; la potencia pico (PEAKPWR) se calculó a partir de la fuerza vertical de reacción registrada por una plataforma de fuerza y la potencia promedio (MEANPWR) durante la propulsión a partir del cambio en la energía potencial del CDM. Se realizaron análisis de regresión usando puntajes estandarizados de ASv como la variable predictora y puntajes estandarizados de potencia como las variables resultantes, con la expectativa de obtener una función de identidad y = x (intercepto = 0, pendiente = 1) y R2 = 1. En el experimento 1, el modelo para zPEAKPWR arrojó R2 = 0.9707 (p <.0001) pero la pendiente (0.3452) ≠ 1 (p = 8.7x10-15). El modelo para zMEANPWR dio R2 = 0.9239 (p < .0001); sin embargo, la pendiente (0.4257) ≠ 1 (p = 1.15x10-5). En el experimento 2, todos los modelos individuales para zPEAKPWR y zMEANPWR arrojaron asociaciones débiles (R2 ≤ 0.21) y pendientes ≠ 1 (p ≤ .001). En conclusión, el análisis de regresión para individuos y aún para grupos confirma que la ASv es un pobre predictor de la potencia mecánica.

Effect of fried sunflower oil intake on mandibular biomechanical competence of growing rats / Efecto del consumo de aceite de girasol termooxidado sobre la competencia biomecánica de la mandíbula, en animales en crecimiento

ABSTRACT Previous studies by us demonstrated that the consumption of thermally oxidized oil diet adversely affects body growth, lipid metabolism, bone mass and femur biomechanical competence. Aim: The aim of this study was to evaluate the effects of a diet containing fried sunflower oil on the mandible of growing rats. Materials and Method: Male Wistar rats (21±1 day old) (n=21) were assigned at weaning to one of three diets for 8 weeks: a control diet (C), a diet containing sunflower oil (SFO) or a diet containing sunflower oil that had been repeatedly heated (SFOx); both SFO and SFOx were mixed with commercial rat chow at 13% (w/w). The consistency and viscosity of the 3 diets were similar. Zoometrics and food intake were recorded weekly. At wk=8, mandibular growth was assessed by measurements of anatomical points of cleaned bones, and mandible biomechanical competence was assessed to estimate the structural properties of the bone. Statistical analysis was performed by SPSS v. 20.0. Results: Rats fed SFOx diet attained the lowest final body weight (P=0.0074), mandibular weight (P=0.0001) and mandibular /length (P=0.0002). Load bearing capacity (Wf;N), load of yielding (Wy;N) and stiffness (Wy/dy;N/mm) of the mandible were negatively affected by both sunflower oil diets (fresh and fried) (P=0.001; P=0.002; P=0.003, respectively) though SFOx induced the most significant reduction in Wy/dy (C:44.4(5.4) > SFO:36.1(2.1) > SFOx: 26.3(3.7) N/ mm; P=0.003). The deleterious effect of SFOx on mandibular growth was more accentuated on the posterior part of the bone (C:11.4(0.3)=SFO:11.2(0.2)>SFOx: 10.7(0.2) mm; p=0.0005); the anterior/ posterior ratio (C:1.25(0.02)=SFO:1.27(0.02)<SFOx:1.32(0.03); p=0.0001) indicated that SFOx induced mandibular deformation. Conclusion: Consumption of SFOx diet during growth could affect mandibular morphometric properties and biomechanical competence, in terms of bone stiffness.

RESUMEN En estudios previos hemos demostrado los efectos adversos del consumo de una dieta rica en aceite termooxidado sobre el crecimiento corporal, el metabolismo de los lípidos, la masa ósea y la competencia biomecánica del fémur. Objetivo: El objetivo de este trabajo fue investigar el efecto de una dieta rica en aceite de girasol termooxidado (AGX) sobre los parámetros morfométricos y biomecánicos de la mandíbula de rata en crecimiento. Materiales y Método: Ratas macho Wistar de 22±1 días de edad (n=21) recibieron durante 8 semanas una de 3 dietas: control (C); dieta comercial, una dieta suplementada con aceite de girasol (AG) y una dieta suplementada con AGX. La consistencia y la viscosidad de las dietas fueron similares. Los parámetros zoométricos y el consumo de dieta se registraron semanalmente. A T=8, los animales se eutanasiaron y se obtuvieron las hemimandíbulas. El crecimiento mandibular se estimó por medidas morfométricas entre puntos anatómicos y las propiedades estructurales por biomecánica. El análisis estadístico se realizó por SPSS v. 20.0. Resultados: Las ratas alimentadas con AGX presentaron menor peso corporal final (p=0.0074), peso mandibular (p=0.0001) y longitud mandibular (p=0.0002). Las propiedades estructurales de la mandíbula, Wf (p=0.001), Wy (p=0.002) y Wy/dy (p=0.003), se vieron afectadas negativamente en ratas alimentadas con AG o AGX, respecto a C; pero la rigidez ósea (Wy/dy) en AGX fue significativamente menor (C:44.4(5.4) > SFO:36.1(2.1) > SFOx: 26.3(3.7) N/mm; p=0.003). El efecto deletéreo del AGX sobre el crecimiento mandibular fue más acentuado en la región posterior (C:11.4(0.3)=SFO:11.2(0.2)>SFOx: 10.7(0.2) mm; p=0.0005). La relación anterior/posterior (C=1.25 (0.02); AG= 1.27(0.02) y AGX=1.32(0.03), p=0.001) indica que AGX indujo deformación mandibular. Conclusiones: El efecto adverso del consumo de una dieta rica en AGX durante el crecimiento podría afectar los parámetros morfométricos y la biomecánica ósea en términos de rigidez ósea.

Age-related variations in corneal stress-strain index in the Indian population

Purpose: To report age?related variations in corneal stress–strain index (SSI) in healthy Indians. Methods: It was a retrospective study where healthy Indian individuals aged between 11 and 70 years who had undergone corneal biomechanics assessment using Corvis ST between January 2017 and December 2021 were enrolled. Composite corneal biomechanical parameters and corneal SSI were abstracted from Corvis ST and compared across different age groups using one?way analysis of variance (ANOVA). Also, Pearson’s correlation was used to evaluate the association between age and SSI. Results: Nine hundred and thirty?six eyes of 936 patients with ages between 11 and 77 years with mean ± SD intraocular pressure (IOP) and pachymetry of 16.52 ± 2.10 mmHg and 541.13 ± 26.39 ?s, respectively. Composite corneal biomechanical parameters such as deformation amplitude ratio max at 1 mm (P < 0.001) and 2 mm (P < 0.001), biomechanically corrected IOP (P = 0.004), stiffness parameter at A1 (P < 0.001, Corvis biomechanical index (P < 0.018), and SSI (P < 0.001) were found to be significantly different as a function of age group. We noted a statistically significant positive association of SSI with age (P < 0.001), spherical equivalent refractive error (P < 0.001), and IOP (P < 0.001) and a significant negative association with anterior corneal astigmatism (P < 0.001) and Anterior chamber depth (ACD) (P < 0.001). Also, SSI was positively associated with SPA1 and bIOP, whereas negatively associated with integrated radius, max inverse radius, and Max Deformation amplitude (DA) ratio at 1 mm and 2 mm. Conclusion: We noted a positive association of corneal SSI with age in normal healthy Indian eyes. This information could be helpful for future corneal biomechanical research.

Biomechanical Gait Analysis in Patients with Osteonecrosis of the Femoral Head / Análise biomecánica da marcha de pacientes com osteonecrose da cabeça do fémur

Abstract Objectives Although osteonecrosis of the femoral head is a prevalent condition, its effects on gait parameters have not been thoroughly studied and are not well-established in the current literature. The primary aim of the present study is to describe gait in patients with a diagnosis of osteonecrosis. Methods This is a cross-sectional study. Nine patients diagnosed with osteonecrosis of the femoral head who were regularly followed-up at an outpatient clinic were selected for the present study and underwent gait analysis using Vicon Motion Capture Systems. Spatiotemporal data was obtained, and joint angles were calculated using an Euler angle coordinate system. Distal coordinate systems were used to calculate joint momentsand forceplatestoobtaingroundreactionforces. Results Patients with osteonecrosis presented with slower velocity (0.54 m/s ± 0.19) and smaller cadence (83.01 steps/min ± 13.23) than healthy patients. The pelvic obliquity range of motion was of 10.12° ± 3.03 and rotation was of 18.23° ± 9.17. The mean hip flexion was of 9.48° ± 3.40. Ground reaction forces showed reduced braking and propelling forces. Joint moments were reduced for flexion and adduction (0.42 Nm/kg ± 0.2 and 0.30 Nm/kg ± 0.11, respectively) but the abduction moment was increased (0.42 Nm/kg ± 0.18). Conclusions The present study showed that osteonecrosis of the femoral head presents compensatory gait mechanisms, with increased pelvic motion and decreased knee flexion to protect the hip joint. Decreased moments for hip flexion and adduction were also identified and muscle weakness for those groups may be correlated to the disease.

Resumo Objetivos Embora a osteonecrose da cabeça do fêmur seja uma lesão prevalente, seus efeitos sobre os parâmetros da marcha não foram minuciosamente estudados e não estão bem estabelecidos na literatura atual. O objetivo principal do presente estudo é descrever a marcha em pacientes com osteonecrose. Métodos Trata-se de um estudo transversal. Nove pacientes com diagnóstico de osteonecrose da cabeça do fêmur, sob acompanhamento regular em ambulatório, foram selecionados para o presente estudo e submetidos à análise da marcha com Vicon Motion Capture Systems. Os dados espaciais e temporais foram obtidos e os ângulos articulares foram calculados com o sistema de coordenadas angulares de Euler. Sistemas de coordenadas distais e plataformas de força foram utilizados para o cálculo de momentos articulares e de forças de reação ao solo, respectivamente. Resultados Os pacientes com osteonecrose apresentaram menor velocidade (0,54 m/s ± 0,19) e menor cadência (83,01 passos/minuto ± 13,23) do que pacientes saudáveis. As amplitudes de movimento de obliquidade e rotação pélvica foram de 10,12°± 3,03 e 18,23° ± 9,17, respectivamente. A média de flexão do quadril foi de 9,48° ± 3,40. O estudo das forças de reação ao solo revelou redução das forças de frenagem e propulsão. Os momentos articulares de flexão e adução caíram (0,42 Nm/kg ± 0,2 e 0,30 Nm/kg ± 0,11), mas o momento de abdução aumentou (0,42 Nm/kg ± 0,18). Conclusões O presente estudo mostrou que a osteonecrose da cabeça do fêmur é associada a mecanismos compensatórios da marcha, com aumento da movimentação pélvica e diminuição da flexão do joelho para proteção da articulação do quadril. A redução dos momentos de flexão e adução do quadril também foi identificada e a fraqueza destes grupos musculares pode estar correlacionada à doença.

Is there a Difference in Interfragmentary Compression Strength Between Fully or Partially Threaded Screws? Results of an Experimental Biomechanical Pilot Study / Há diferença na força de compressão interfragmentar entre parafusos com rosca total ou parcial? Resultados de um estudo biomecânico experimental piloto

Abstract Objective This study assessed differences between fully- and partially-threaded screws in the initial interfragmentary compression strength. Our hypothesis was that there would be an increased loss in initial compression strength with the partially-threaded screw. Methods A 45-degree oblique fracture line was created in artificial bone samples. The first group (FULL, n = 6) was fixed using a 3.5-mm fully-threaded lag screw, while the second group (PARTIAL, n = 6) used a 3.5-mm partially-threaded lag screw. Torsional stiffness for both rotational directions were evaluated. The groups were compared based on biomechanical parameters: angle-moment-stiffness, time-moment-stiffness, maximal torsional moment (failure load), and calibrated compression force based on pressure sensor measurement. Results After loss of one PARTIAL sample, no statistically significant differences in calibrated compression force measurement were observed between both groups: [median (interquartile range)] FULL: 112.6 (10.5) N versus PARTIAL: 106.9 (7.1) N, Mann-Whitney U-test: p = 0.8). In addition, after exclusion of 3 samples for mechanical testing (FULL n = 5, PARTIAL n = 4), no statistically significant differences were observed between FULL and PARTIAL constructs in angle-moment-stiffness, time-moment-stiffness, nor maximum torsional moment (failure load). Conclusion There is no apparent difference in the initial compression strength (compression force or construct stiffness or failure load) achieved using either fully-or partially-threaded screws in this biomechanical model in high-density artificial bone. Fully-threaded screws could, therefore, be more useful in diaphyseal fracture treatment. Further research on the impact in softer osteoporotic, or metaphyseal bone models, and to evaluate the clinical significance is required.

Resumo Objetivo Este estudo avaliou diferenças entre parafusos com rosca total ou parcial na resistência à compressão interfragmentar inicial. Nossa hipótese era de que haveria maior perda de resistência à compressão inicial com o parafuso de rosca parcial. Métodos Uma linha de fratura oblíqua de 45 graus foi criada em amostras de osso artificial. O primeiro grupo (TOTAL, n = 6) foi fixado com um parafuso de 3,5 mm de rosca total, enquanto o segundo grupo (PARCIAL, n = 6) usou um parafuso de 3,5 mm de rosca parcial. Avaliamos a rigidez à torção em ambas as direções de rotação. Os grupos foram comparados com base nos seguintes parâmetros biomecânicos: momento de rigidez-ângulo, momento de rigidez-tempo, momento de torção máxima (carga de falha) e força de compressão calibrada com base na medida do sensor de pressão. Resultados Depois da perda de uma amostra PARCIAL, não foram observadas diferenças estatisticamente significativas na força de compressão calibrada entre os 2 grupos [mediana (intervalo interquartil)]: TOTAL: 112,6 (10,5) N e PARCIAL: 106,9 (7,1) N, com p = 0,8 segundo o teste U de Mann-Whitney). Além disso, após a exclusão de 3 amostras para testes mecânicos (TOTAL, n = 5, PARCIAL, n = 4), não foram observadas diferenças estatisticamente significativas entre os construtos TOTAL e PARCIAL quanto ao momento de rigidez-ângulo, momento de rigidez-tempo ou momento de torção máxima (carga de falha). Conclusão Não há diferença aparente na força de compressão inicial (força de compressão ou rigidez do construto ou carga de falha) com o uso de parafusos de rosca total ou parcial neste modelo biomecânico em osso artificial de alta densidade. Parafusos de rosca total podem, portanto, ser mais úteis no tratamento de fraturas diafisárias. Mais pesquisas são necessárias sobre o impacto em modelos ósseos osteoporóticos ou metafisários de menor densidade e avaliação do significado clínico.