Mechanism and application in tissue engineering of the active ingredient of Drynariae Rhizoma promoting bone defect repair / 中国药房

Bone defect has always been a major clinical challenge because of its great difficulty and long period of treatment. Drynariae Rhizoma is a commonly used medicine in osteology and traumatology of traditional Chinese medicine， and its active ingredients（mainly flavonoids） facilitate osteoblast differentiation of bone marrow mesenchymal stem cells， osteoclast proliferation， vascular-osteogenic coupling， and inhibit osteoclast activity to promote bone mineralization， and repair and reconstruction of bone defect. As a good substitute for bone regeneration drugs， the active constituents of Drynariae Rhizoma can be loaded on scaffold materials of tissue engineering， which greatly improves the bioavailability of the drug. Meanwhile， the sustained-release microspheres also solve some problems such as sudden drug release from the scaffolds， and the composite scaffolds with active ingredient of Drynariae Rhizoma prepared by them have good ossification activity and osteoinduction， with precise bone repair effects， which meet the diverse performance requirements of bone grafts and have a promising clinical application prospect.

Reconstruction of rat calvarial defects utilizing an ultraviolet-cured hydrogel loaded with bone marrow mesenchymal stem cells / 口腔疾病防治

Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.

3D printed Mg-incorporated polycaprolactone scaffolds for repairing rat skull defects / 口腔疾病防治

Objective@#To evaluate the bone repair effect of 3D-printed magnesium (Mg)-loaded polycaprolactone (PCL) scaffolds in a rat skull defect model.@*Methods@#PCL scaffolds mixed with Mg microparticles were prepared by using 3D printing technology, as were pure PCL scaffolds. The surface morphologies of the two scaffolds were observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed via energy dispersive spectroscopy (EDS). The physical properties of the scaffolds were characterized through contact angle measurements and an electronic universal testing machine. This study has been reviewed and approved by the Ethics Committee. A critical size defect model was established in the skull of 15 Sprague-Dawley (SD) rats, which were divided into the PCL group, PCL-Mg group, and untreated group, with 5 rats in each group. Micro-CT scanning was performed to detect and analyze skull defect healing at 4 and 8 weeks after surgery, and samples from the skull defect area and major organs of the rats were obtained for histological staining at 8 weeks after surgery.@*Results@#The scaffolds had a pore size of (480 ± 25) μm, a fiber diameter of (300 ± 25) μm, and a porosity of approximately 66%. The PCL-Mg scaffolds contained 1.0 At% Mg, indicating successful incorporation of Mg microparticles. The contact angle of the PCL-Mg scaffolds was 68.97° ± 1.39°, indicating improved wettability compared to that of pure PCL scaffolds. Additionally, compared with that of pure PCL scaffolds, the compressive modulus of the PCL-Mg scaffolds was (57.37 ± 8.33) MPa, demonstrating enhanced strength. The PCL-Mg group exhibited the best bone formation behavior in the skull defect area compared with the control group and PCL group at 4 and 8 weeks after surgery. Moreover, quantitative parameters, such as bone volume (BV), bone volume/total volume (BV/TV), bone surface (BS), bone surface/total volume (BS/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N) and bone mineral density (BMD), of skull defects were better than those in the other groups, indicating the best bone regeneration effect. H&E, Goldner, and VG staining revealed more mineralized new bone formation in the PCL-Mg group than in the other groups, and H&E staining of the major organs revealed good biosafety of the material.@*Conclusion@#PCL-Mg scaffolds can promote the repair of bone defects and have clinical potential as a new scaffold material for the repair of maxillofacial bone defects.

Application of the plasmatrix in alveolar ridge preservation / 口腔疾病防治

@#After tooth extraction, significant absorption occurs in the soft and hard tissues of the alveolar ridge. The goal of alveolar ridge preservation is to maintain the volume and shape of the alveolar ridge's soft and hard tissues as much as possible so as to provide suitable conditions for implant placement. Currently, there are challenges in classifying the socket for alveolar ridge preservation, such as the difficulty in directly guiding the selection of graft materials and clinical procedures and the insufficient space for particle xenograft maintenance, resulting in poor bone regeneration. Plasmatrix is an autologous blood derivative that effectively enhances tissue regeneration. This article introduced the characteristics of soft and hard tissue defects after tooth extraction and the primary applications of plasmatrix for alveolar ridge preservation (liquid plasmatrix, solid plasmatrix membrane/plug, and plasmatrix bone blocks) as well as the proposed methods for the reclassification of sockets for alveolar ridge preservation based on soft and hard tissue defects at the extraction site to facilitate the creation of clinical recommendations. The proposed classifications are as follows: Class I, extraction socket without bone defect, with or without soft tissue defect; Class Ⅱ, extraction socket with bone defect, both sides with bone wall defect less than 50%, with or without soft tissue defect; Class Ⅲ, extraction socket with bone tissue defect, at least one side with bone wall defect greater than 50%, with or without soft tissue defect. For the Class I socket, a solid plasmatrix membrane or plug is inserted, followed by injection of liquid plasmatrix, using a double-layer solid plasmatrix membrane for socket closure; for the ClassⅡ socket, plasmatrix bone blocks are inserted, followed by injection of liquid plasmatrix and secondary solidification, using absorbable collagen membrane and double-layer solid plasmatrix membrane for socket closure; for the ClassⅢ socket, tenting screws are used to maintain height, followed by implantation of plasmatrix bone blocks, injection of liquid plasmatrix and secondary solidification, using absorbable collagen membrane and double-layer solid plasmatrix membrane for socket closure. The aim of this article is to provide comprehensive knowledge of plasmatrix for oral clinicians to serve as a reference to simplify the clinical decision-making process and procedures for alveolar ridge preservation.

Retrospective clinical study of hip replacement in the treatment of traumatic arthritis secondary to acetabular fracture / 中国骨伤

OBJECTIVE@#To investigate the clinical effect of total hip replacement (THA) in the treatment of traumatic arthritis secondary to acetabular fracture.@*METHODS@#From October 2019 to June 2022, 15 patients with secondary traumatic arthritis of acetabulum fracture were treated with THA. There were 8 males and 7 females, aged from 40 to 76 years old with an average of (59.20±9.46) years old. Prosthesis loosening, dislocation of hip joint, range of motion of hip joint, nerve injury and other conditions were recorded before and after surgery. Harris score, visual analogue scale (VAS) and imaging were used to evaluate hip joint function and surgical effect.@*RESULTS@#Follow-up time ranged 6 to 39 months with an average of (18.33±9.27) months. All the 15 patients successfully completed the operation, no nerve and blood vessel injury during the operation, postoperative wound healing was stageⅠ, no infection, one case of acetabular side prosthesis loosening at half a year after operation, and recovered well after revision surgery, one case of hip dislocation was cured after open reduction treatment, no adverse consequences. Harris score at the last postoperative follow-up was (88.60±4.01) points, compared with the preoperative (47.20±11.77) points, the difference was statistically significant (P<0.05), and VAS at the lateat postoperative follow-up was 1 (1) points, compared with the preoperative 8 (2) points, the difference was statistically significant (P<0.05). At the last follow-up, the pain symptoms were relieved or disappeared, and the joint function was satisfactory. The imaging data of the latest follow-up showed joint was well pseudoradiated, no abnormal ossification occurred, and the prosthesis was not loose.@*CONCLUSION@#THA is effective in the treatment of traumatic arthritis secondary to acetabular fracture and can effectively improve the quality of life of patients. Preoperative comprehensive evaluation and bone defect evaluation of patients, and intraoperative management of acetabulum, femur, internal fixation and bone defect are key factors for the success of surgery.

Split crest con colocación simultánea de implantes en sector anterior: reporte de un caso / Split crest with simultaneous placement of implants in the anterior sector: a case report

La pérdida ósea en el sector anterior, ya sea por un defecto horizontal, vertical o combinado, actualmente es un desafío, no sólo por la integración del implante, sino por la estética involucrada. Entre las técnicas de regeneración ósea que permiten solucionar estos defectos, cabe destacar la técnica de expansión de crestas. Se presenta el caso de una paciente de 58 años con reborde atrófico, que se sometió a la expansión de crestas con colocación simultánea de implantes en sector anterior, con xenoinjerto previo a técnica de expansión de crestas con piezoeléctrico, colocación simultánea de implantes Narrow Connection SLActive Straumann. Se logró ganancia ósea y estabilidad primaria de los implantes, sin complicaciones. En escenarios seleccionados, la técnica de expansión de crestas de manera predecible permite ganancia de hueso horizontal adecuada, el éxito de los implantes con tasa de supervivencia y mínimas complicaciones intra y postoperatorias (AU)

Bone loss in the anterior sector, both a horizontal, vertical or combined defect is a challenge today; not only for the integration of the implant but also the aesthetic involved. There are techniques of bone regeneration that help us to solve this type of defects, among them we should highlight the crest expansion technique. We present the case of a 58-year-old patient with atrophic flange, who underwent the expansion of crests with simultaneous placement of implants in the anterior sector, with xenograft prior to the piezoelectric crest expansion technique, Simultaneous placement of Narrow Connection SLActive Straumann implants, bone gain and primary stability of the implants were obtained, without complications. In selected scenarios, the crest expansion technique could be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain, and minimal intra- and postoperative complications (AU)

Suckermouth catfish bone extract as bone graft raw material for bone-healing promotes bone growth in bone loss / Extrato de osso de bagre como material de reparo promove o crescimento ósseo em perda óssea

Objective: This study aimed to evaluate the properties of suckermouth catfish bone extract, which allows it to be adopted as a raw material for bone graft following its graft in an artificial defect of a rat model. Material and Methods: Hydroxyapatite (HA) from suckermouth catfish bone extract was characterized using Fourier-transform infrared spectroscopy (FTIR), and its toxicity was evaluated by Brine Shrimp Lethality Test (BSLT). This material was grafted on artificial defects in rats' femoral bones, which were observed immunologically by Enzyme-linked immunosorbent assay (ELISA) after one week and four weeks, and radiographically in the second week, and histologically in the second and fourth weeks. Results: FTIR shows that this material consists of phosphate, hydroxyl, and carbonate groups, while the BSLT results show that this material is not toxic. Observations by ELISA showed an increase in the expression of Tumor necrosis factor alpha (TNF-α) in defects with HA in the fourth week. Radiographically the defect did not show closure in the second week. In contrast, histological analysis showed a better bone healing process in the defect, which was applied with the HA of the suckermouth catfish bone. Conclusion: The HA extracted from the suckermouth catfish bone has beneficial properties as an alternative to bone graft raw material and, more investigated needed to support this biomaterial to be used in the treatment of bone loss (AU)

Objetivo: Avaliar as propriedades do extrato de osso de bagre, que permitem sua adoção como material bruto para enxerto ósseo, em um defeito ósseo artificial em ratos. Material e Métodos: A hidroxiapatita (HA) do extrato de osso de bagre foi caracterizada usando espectroscopia infravermelha por transformada de Fourier (FTIR), e sua toxicidade foi avaliada pelo Teste de Letalidade do Camarão de Sal (BSLT). Esse material foi enxertado em defeitos artificiais nos ossos femorais de ratos. Análise imunológica por meio do ensaio imunoenzimático (ELISA) foi realizada uma e quatro semanas após a colocação dos enxertos. Análises radiográficas foram feitas na segunda semana e histológica na segunda e quarta semanas. Resultados: A FTIR mostrou que esse material é composto por grupos de fosfato, hidroxila e carbonato, enquanto os resultados do BSLT mostraram que esse material não é tóxico. As observações pelo ELISA mostraram um aumento na expressão do fator de necrose tumoral alfa (TNF-α) nos defeitos com HA na quarta semana. Radiograficamente, o defeito não apresentou fechamento na segunda semana. Em contraste, a análise histológica mostrou um melhor processo de cicatrização óssea no defeito que foi aplicado com a HA do osso de bagre. Conclusão: A HA extraída do osso de bagre possui propriedades benéficas como alternativa ao material bruto para enxerto ósseo, sendo necessárias mais investigações para apoiar esse biomaterial a ser usado no tratamento da perda óssea.(AU)

Pro-angiogenic photo-crosslinked silk fibroin hydrogel: a potential candidate for repairing alveolar bone defects

Abstract Objective: This study aimed to develop a pro-angiogenic hydrogel with in situ gelation ability for alveolar bone defects repair. Methodology: Silk fibroin was chemically modified by Glycidyl Methacrylate (GMA), which was evaluated by proton nuclear magnetic resonance (1H-NMR). Then, the photo-crosslinking ability of the modified silk fibroin was assessed. Scratch and transwell-based migration assays were conducted to investigate the effect of the photo-crosslinked silk fibroin hydrogel on the migration of human umbilical vein endothelial cells (HUVECs). In vitro angiogenesis was conducted to examine whether the photo-crosslinked silk fibroin hydrogel would affect the tube formation ability of HUVECs. Finally, subcutaneous implantation experiments were conducted to further examine the pro-angiogenic ability of the photo-crosslinked silk fibroin hydrogel, in which the CD31 and α-smooth muscle actin (α-SMA) were stained to assess neovascularization. The tumor necrosis factor-α (TNF-α) and interleukin-1β (IL-1β) were also stained to evaluate inflammatory responses after implantation. Results: GMA successfully modified the silk fibroin, which we verified by our 1H-NMR and in vitro photo-crosslinking experiment. Scratch and transwell-based migration assays proved that the photo-crosslinked silk fibroin hydrogel promoted HUVEC migration. The hydrogel also enhanced the tube formation of HUVECs in similar rates to Matrigel®. After subcutaneous implantation in rats for one week, the hydrogel enhanced neovascularization without triggering inflammatory responses. Conclusion: This study found that photo-crosslinked silk fibroin hydrogel showed pro-angiogenic and inflammation inhibitory abilities. Its photo-crosslinking ability makes it suitable for matching irregular alveolar bone defects. Thus, the photo-crosslinkable silk fibroin-derived hydrogel is a potential candidate for constructing scaffolds for alveolar bone regeneration.

Short term efficacy of 3D printed individualized prosthesis for precise reconstruction of bone and joint defects after upper limb microsurgical repair / 中华显微外科杂志

Objective:To evaluate the efficacy of 3D printed individualised prosthesis in treating bone and joint defects in upper limbs remained after earlier microsurgical repairs.Methods:From June 2019 to September 2021, 12 patients were treated in the Institute of Orthopaedic Trauma of PLA, the 80th Group Army Hospital for bone and joint defects in upper limb that had been remained after earlier repairs with soft tissue flaps. The defects were: 1 in completely severed wrist, 2 defects of digit metacarpal bone, 4 defects of interphalangeal joint, 4 defects of bones in radiocarpal joint and 1 defect of lunate bone. The area of soft tissue defect ranged from 1.5 cm×3.0 cm to 12.0 cm×18.0 cm, and the length of bone defects ranged from 2.5 to 8.5(average 3.64) cm. For incompletely severed and completely severed limbs, replantation of severed limbs (digits) were performed in the primary surgery and the repair of soft tissue defects were performed in the second stage surgery. The remaining defects of bone and joint were reconstructed by 3D printed individualised prostheses in the third stage surgery. Finger soft tissue defects were covered with a local flap in the primary surgery, and bone and joint defects were reconstructed with a 3D printed prosthesis in the second surgery. Finger soft tissue defects were covered with a local flap in the first phase, and bone and joint defects were reconstructed with a 3D printed prosthesis in the second phase. After the surgery, the bone integration between the broken end of the bone joint defect and the prosthesis was determined based on the X-ray results and the Paley fracture healing score standard. Simultaneously measured the Total Active Motion(TAM) of the forearm and hand joints. At 1, 2, 3, 6, 9 and 12 months after hospital discharge. Follow-up X-ray examinations were taken followed by examinations on the recovery of soft tissues and bones. The upper limb function was graded according to the Evaluation Trial Standards of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association.Results:Postoperative follow-up at outpatient clinic lasted for 6 to 26 months, with an average of 11.5 months. All flaps were free from necrosis and infection, also there was no infection in bones and joints. According to the Paley fracture healing scale, 10 patients were in excellent and 2 in good. In addition, according to the Evaluation Trial Standards of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association, 5 patients achieved upper limb function in excellent, 5 in good and 2 in fair. The ranges of motion of the affected wrists were 30°-42°(average 37.3°) for the implanted prostheses of distal end of radius and the radial shaft. Wrist flexion 40° to 55°(average 43.5°). The range of motion of finger and wrist was 60° to 70°(average 65.7°) with a metacarpal and phalangeal bone prosthesis.Conclusion:3D printed individually customised prostheses are safe, accurate and effective in repair of the remained bone and joint defects in upper limbs after primary and early stages of microsurgical flap repairs. It can effectively restore anatomical structures of bone and joint in upper limbs.

Chimeric flap pedicled with superficial branch of superficial iliac circumflex artery in repair of soft tissue defects of dorsal hand and metacarpal bone / 中华显微外科杂志

Objective:To investigate the effect of chimeric flap pedicled with superficial branch of superficial iliac circumflex artery in repair of soft tissue defect of dorsal hand combined with metacarpal bone defect.Methods:From May 2015 to January 2022, 34 patients(28 males and 6 females) of soft tissue defects of dorsal hand with metacarpal bone defects were treated in the Department of Orthopedics of Yibin Third People's Hospital. The age of patients ranged from 22 to 51 years old, with an average age of 37 years old. The areas of soft tissue defects after debridement were 2.5 cm×5.0 cm-4.5 cm×9.0 cm, and the defects were all in dorsal hand and dorsal wrist. The lengths of metacarpal bone defect were 1.8-4.1 cm. All the patients had only single metacarpal bone defect, among which: 14 patients had defects in first metacarpal bone, 7 in second metacarpal bone, 4 in third metacarpal bone, 8 in fourth metacarpal bone and 1 in fifth metacarpal bone. All the patients were repaired by chimeric flap pedicled with superficial branch of superficial iliac circumflex artery. The size of flaps were 3.6 cm×5.4 cm-5.2 cm×9.5 cm. Anticoagulation, thermal preservation and plaster fixation were applied for 4-6 weeks after surgery. Postoperative follow-ups included regularly outpatient clinic visit, telephone or Wechat reviews. Follow-up items covered: the feeling and appearance of flaps in recipient sites, healing of the donor sites and recovery of hand functions.Results:All the 34 chimeric flaps survived. Regular follow-up lasted for 3 to 15(average, 10) months. All incisions in the donor sites of hip healed in stage I. TPD of the flaps was 5.1-7.3(mean, 6.4) mm. Appearance of flaps in the receiving area were satisfactory without swelling. Movement of wrists and metacarpophalangeal joints met the basic requirement of movement. The healing time of metacarpal defect was 2-3 months with an average of 2.8 months. Hand functions were evaluated at excellent in 6 patients and good in 28, according to the Evaluation Standard of Upper Limb Partial Functional of Hand Surgery of Chinese Medical Association.Conclusion:The chimeric flap pedicled with superficial branch of superficial iliac circumflex artery is an ideal flap to repair the soft tissue defect in dorsal hand combined with metacarpal bone defect. It has advantages of less donor site damage, good blood supply of flap, simple surgical procedure, and one-stage repair of a combined soft tissue and metacarpal bone defects.

Customized 3D printed acetabular augment for repair of large acetabular bone defects in delayed total hip arthroplasty after failed treatment of acetabular fractures / 中华创伤骨科杂志

Objective:To investigate the early clinical effectiveness of using customized 3D printed acetabular augment to repair large acetabular bone defects in delayed total hip arthroplasty after failed treatment of acetabular fractures.Methods:A retrospective study was conducted to analyze the 6 patients who had undergone 3D printed acetabular augment to reconstruct acetabular bone defects in delayed total hip replacement from July 2021 to January 2023 after failed treatment of acetabular fractures. They were all males, with an age of (51.3±15.0) years. Paprosky classification: 2 cases of type ⅡB, 1 case of type ⅡC, and 3 cases of type ⅢA. Recorded were surgical time, intraoperative bleeding, hospitalization time, and visual analogue scale (VAS), and modified Merle d'Aubigné & Postel score, Harris hip score, and leg length discrepancy at the last follow-up.Results:For the 6 patients, the mean surgical time was (222.5±46.9) min, the mean intraoperative bleeding 1,100 (1,000, 2,625) mL, the mean hospitalization time (9.0±4.5) d, and the mean follow-up time (11.8±7.9) months. At the last follow-up, the VAS [(2.5±1.0) points] significantly decreased compared with the preoperative value [(6.2±0.8) points], the modified Merle d'Aubigné & Postel score [(13.2±2.1) points] and Harris hip score [(67.8±15.3) points] significantly increased compared with the preoperative values [(6.7±0.8) and (34.2±8.4) points], the vertical position of center of rotation [(22.5±5.2) mm] and the horizontal position of center of rotation [(40.7±2.6) mm] were significantly reduced compared with the preoperative values [(38.1±14.2) and (53.1±10.0) mm] ( P<0.05). At the last follow-up, the leg length discrepancy was (6.2±3.6) mm, showing no statistically significant difference from the preoperative value [(18.7±1.7) mm] ( P>0.05). At the last follow-up, no clear line at the cup-bone or augment-bone interface, or no possible prosthetic loosening or displacement was observed on the X-ray films. Conclusion:In delayed total hip arthroplasty after failed treatment of acetabular fractures, the customized 3D printed augment for repair of large bone defects in the acetabulum can reconstruct the normal rotation center of the hip joint, provide reliable stability for the cup prosthesis, and enable patients to obtain significant improvements in hip function.

Be alert to insidious fracture-related infections secondary to severe open fractures / 中华创伤骨科杂志

Objective:To report our experience in using the Ilizarov technique to treat bone defects secondary to Gustilo Ⅲb open tibial fractures with negative clinical signs and serological inflammatory markers.Methods:A retrospective study was performed to analyze the 19 patients with bone defects secondary to Gustilo Ⅲb open tibial fracture who had been treated at Department of Orthopaedics and Traumatology, Beijing Jishuitan Hospital between January of 2010 and June of 2021. They were 15 males and 4 females with an age of (41±11) years. Their inclusion criteria: undergoing treatment with Ilizarov technique (consecutive compression-distraction or bone transport), soft tissue coverage procedures resulting in wound closure and negative clinical infection signs for at least 3 months and normal serological inflammatory markers, and follow-up for more than 3 months after frame removal. Three-phase bone scan was performed for the patients before the present surgery. Debridement, sampling of deep tissues for bacterial culture, and external stabilization with a fixator were performed in the present surgery. Osteotomy for compression-distraction or bone transport technique was carried out at 1 stage or 2 stages. Systemic antibiotic therapy for 6 weeks was continued for those with positive microbiological analysis guided by antibiogram. Recorded were results of intra-operative pus detection around defects, microbiological findings, length of bone defect reconstructed, rate and time of infection recurrence during treatment, fracture union rate, bone healing index, bony and functional results.Results:The interval between primary injury to the present surgery was (10±8) months. The preoperative three-phase bone scan showed infection free in 8 cases, chronic osteomyelitis in 7 cases, and suspicious infection in 4 cases. No pus was found during intra-operative debridement in all. The intra-operative microbiological detection was positive in 1 sample in 1 patient (infection free indicated by bone scan), and in ≥2 samples in 3 patients (bone scan indicating non-infection, infection not excluded and osteomyelitis in 1 case each). The length of bone defect reconstructed was (8±3) cm. The follow-up after the present surgery was (37±15) months. Fracture union was achieved in all cases, with a bone healing index of (1.7±0.5) months/cm. Clinical infection signs were observed 1 (1, 1) month after the present surgery in 6 patients whose microbiological results were all negative. All the 6 patients ended up with no clinical recurrence after empirical use of systemic antibiotics in 5 and radical debridement in one. The bony results showed 16 excellent and 3 good cases while the functional results showed 10 excellent and 9 good cases.Conclusions:In treatment of bone defects secondary to Gustilo Ⅲb open tibial fractures with negative clinical signs and serological inflammatory markers, constant vigilance is needed against low-grade infection. Intra-operative multiple sampling of deep tissues with a standardized protocol and microbiological testing are extremely valuable for diagnosis of fracture-related infections.

Application progress of Ilizarov technique in orthopedics / 中国基层医药

Ilizarov technique is designed based on the "tension-stress principle". Application of the Ilizarov technique can help form a stable mechanical structure through external fixation. It only creates small wounds, without peeling off the surrounding tissue and periosteum. It connects different types of fixation pins and bone or soft tissue to form a traction force, which continuously stimulates the regeneration of bone and tissue and improves the local blood supply and early functional rehabilitation exercises, forming a complete set of minimally invasive orthopedic treatment systems. Ilizarov technique has achieved good results in fracture healing, deformity correction, tissue repair, osteomyelitis, bone nonunion, bone defect, and bone tumor. This paper will summarize the clinical application and research of the Ilizarov technique in orthopedics and explore the key problems of the Ilizarov technique that need to be solved at present.

Application of digital technology and platelet-rich fibrin technology in a novel regenerative treatment for posterior lingual furcation defect: a 6-year follow-up case report / 华西口腔医学杂志

Conventional periodontal regenerative surgery has limited effect on tooth with severe periodontitis-related alveolar bone defects. This article reported a case of regenerative treatment in severe distal-bone defect of mandibular first molar. The treatment involved applying 3D printing, advanced/injectable platelet-rich fibrin, and guided tissue-regeneration technology. After the operation, the periodontal clinical index significantly improved and the alveolar bone was well reconstructed.

Hemilateral bone longitudinal transport technique for the treatment of hemilateral defects of long bones of lower limbs / 中国骨伤

OBJECTIVE@#To explore clinical efficacy of Ilizarov hemilateral bone longitudinal transport technique in treating hemilateral bone defects associated with chronic osteomyelitis of lower extremity long bones.@*METHODS@#Clinical data of 13 patients with hemilateral bone defects caused by chronic osteomyelitis of lower extremity long bones and treated by Ilizarov hemilateral bone longitudinal transport technique were retrospective analyzed, including 10 males and 3 female, aged from 14 to 55 years old;4 patients occurred femoral and 9 patients occurred tibial;10 patients were diagnosed as traumatic osteomyelitis and 3 patients as hematogenous osteomyelitis. The anatomical classification of Cierny-Mader in 13 patients was type Ⅲ. Bone and wound healing, postopertaive complication, and bony and functional results were observed by Paley evaluation standard.@*RESULTS@#After removing external fixator, all patients were followed up from 6 to 70 months. Transporting time ranged from 54 to 158 d. And the time in external fixation ranged from 6.8 to 19.5 months. External fixation index (EFI) ranged from 1.23 to 1.6 months/cm. According to Paley's evaluation criteria, bony results were excellent in 13 patients;functional results showed excellent in 12 patients and good in 1 patient. Two patients occurred poor union on the docking sites and healed with autogenous iliac bone graft. The callus at the extended area was poorly mineralized and improved significantly when treated with low-intensity pulsed ultrasound in one patient. All patients had good wound healing without recurrence of osteomyelitis and refracture. There was no vascular and nerve injury and axial deviation in all patients and they were satisfied with the appearance and function of lower limbs. The range of motion of knee and ankle joint before operation was 120 ° to 150 ° and 35 °to 80 ° respectively, and at the latest follow-up was 110 ° to 140 ° and 30 ° to 75 ° .@*CONCLUSION@#Ilizarov hemilateral bone longitudinal transport technique is effective in treating infective hemilateral bone defects of lower extremity long bones, which could not only simplify architecture of external fixation, but also reduce the number of fixation pins, shorten the time in external fixator and decrease the incidence of pin tract infection. However, this technique is highly demanding, and the growth of callus in extended region and healing of bone apposition should be noticed.

Advances in revision surgery after primary total hip arthroplasty for Crowe type Ⅳ developmental dysplasia of the hip / 中国修复重建外科杂志

OBJECTIVE@#To review research advances of revision surgery after primary total hip arthroplasty (THA) for patients with Crowe type Ⅳ developmental dysplasia of the hip (DDH).@*METHODS@#The recent literature on revision surgery after primary THA in patients with Crowe type Ⅳ DDH was reviewed. The reasons for revision surgery were analyzed and the difficulties of revision surgery, the management methods, and the related prosthesis choices were summarized.@*RESULTS@#Patients with Crowe type Ⅳ DDH have small anteroposterior diameter of the acetabulum, large variation in acetabular and femoral anteversion angles, severe soft tissue contractures, which make both THA and revision surgery more difficult. There are many reasons for patients undergoing revision surgery after primary THA, mainly due to aseptic loosening of the prosthesis. Therefore, it is necessary to restore anatomical structures in primary THA, as much as possible and reduce the generation of wear particles to avoid postoperative loosening of the prosthesis. Due to the anatomical characteristics of Crowe type Ⅳ DDH, the patients have acetabular and femoral bone defects, and the repair and reconstruction of bone defects become the key to revision surgery. The acetabular side is usually reconstructed with the appropriate acetabular cup or combined metal block, Cage, or custom component depending on the extent of the bone defect, while the femoral side is preferred to the S-ROM prosthesis. In addition, the prosthetic interface should be ceramic-ceramic or ceramic-highly cross-linked polyethylene wherever possible.@*CONCLUSION@#The reasons leading to revision surgery after primary THA in patients with Crowe type Ⅳ DDH and the surgical difficulties have been clarified, and a large number of clinical studies have proposed corresponding revision modalities based on which good early- and mid-term outcomes have been obtained, but further follow-up is needed to clarify the long-term outcomes. With technological advances and the development of new materials, personalized prostheses for these patients are expected to become a reality.

Anatomic study and clinical application of iliac crest chimeric tissue flap / 中国修复重建外科杂志

OBJECTIVE@#To conduct anatomical study on the iliac crest chimeric tissue flap and summarize its effectiveness of clinical application in repairing limb wounds.@*METHODS@#Latex perfusion and anatomical study were performed on 6 fresh adult cadaver specimens with 12 sides, to observe the initial location, distribution, quantity, and direction of the common circumflexa iliac artery, the deep circumflexa iliac artery, and the superficial circumflexa iliac artery, and to measure their initial external diameter. Between December 2020 and September 2022, the iliac crest chimeric tissue flap repair was performed on 5 patients with soft tissue of limbs and bone defects. There were 3 males and 2 females, with an average age of 46 years (range, 23-60 years). Among them, there were 3 cases of radii and skin soft tissue defects and 2 cases of tibia and skin soft tissue defects. The length of bone defects was 4-8 cm and the area of skin soft tissue defects ranged from 9 cm×5 cm to 15 cm×6 cm. The length of the iliac flap was 4-8 cm and the area of skin flap ranged from 12.0 cm×5.5 cm to 16.0 cm×8.0 cm. The donor sites were directly sutured.@*RESULTS@#Anatomical studies showed that there were 10 common circumflex iliac arteries in 5 specimens, which originated from the lateral or posterolateral side of the transition between the external iliac artery and the femoral artery, with a length of 1.2-1.6 cm and an initial external diameter of 0.8-1.4 mm. In 1 specimen without common circumflexa iliac artery, the superficial and deep circumflex iliac arteries originated from the external iliac artery and the femoral artery, respectively, while the rest originated from the common circumflex iliac artery. The length of superficial circumflex iliac artery was 4.6-6.7 cm, and the initial external diameter was 0.4-0.8 mm. There were 3-6 perforator vessels along the way. The length of deep circumflex iliac artery was 7.8-9.2 cm, and the initial external diameter was 0.5-0.7 mm. There were 3-5 muscular branches, 4-6 periosteal branches, and 2-3 musculocutaneous branches along the way. Based on the anatomical observation results, all iliac crest chimeric tissue flaps were successfully resected and survived after operation. The wounds at recipient and donor sites healed by first intention. All patients were followed up 8-24 months, with an average of 12 months. The tissue flap has good appearance and soft texture. X-ray film reexamination showed that all the osteotomy healed, and no obvious bone resorption was observed during follow-up.@*CONCLUSION@#The common circumflex iliac artery, deep circumflex iliac artery, and superficial circumflex iliac artery were anatomically constant, and it was safe and reliable to use iliac crest chimeric tissue flap in repairing the soft tissue and bone defects of limbs.

Study on the effects and mechanism of luteolin on osteogenic repair of bone defects / 中国药房

OBJECTIVE To investigate the effects and mechanism of luteolin on osteogenic repair of bone defects. METHODS The targets and potential pathways of luteolin in the treatment of bone defects were screened by network pharmacology method， and then the top 2 targets were selected by Hub gene screening for molecular docking verification， with binding energy as the evaluation standard. In vitro experiments were conducted on rat bone mesenchymal stem cells （BMSC） and rat umbilical vein endothelial cells （RUVEC）. Phenotypic validation was performed using alkaline phosphatase staining， alizarin red S staining， and in vitro angiogenesis experiments. Western blot assay was used to detect the protein expressions of phosphatidylinositol 3 kinase （PI3K） and protein kinase 1 （Akt1）， so as to validate the mechanism of luteolin on osteogenic differentiation of BMSC and angiogenesis of RUVEC in vitro. RESULTS The results of network pharmacology showed that the effects of luteolin on vascular formation and bone repair in bone defects were mainly related to Akt1， SRC， estrogen receptor 1， epidermal growth factor receptor， cyclooxygenase 2， matrix metalloproteinase 9 targets， and were closely related to PI3K-Akt signaling pathway. The results of molecular docking showed that luteolin binding to Akt1 and SRC proteins was stable. The results of in vitro experiments showed that luteolin could significantly improve the expressions and activities of alkaline phosphatase in BMSC， increased the number of calcium salt deposits and calcified nodules， and promoted calcification of BMSC. Compared with luteolin 0 μmol/L group， the angiogenesis ability of RUVEC was enhanced significantly in luteolin 1， 10 μmol/L groups， the length of blood vessels and the protein expressions of PI3K and Akt1 were significantly increased （P＜0.05 or P＜0.01）； the higherthe concentration， the better the effect. CONCLUSIONS Luteolin may play a role in promoting angiogenesis and bone repair at the fracture site by activating PI3K/Akt signaling pathway and promoting the protein expressions of PI3K and Akt1.

Research progress on "sandwich" osteotomy to increase alveolar bone / 口腔疾病防治

@#Lack of alveolar bone height is a major challenge for dental implants. In recent years, the use of "sandwich" osteotomy to increase alveolar bone height has become a topic of discussion within the research community. In theory, "sandwich" osteotomy is a U-shaped osteotomy in the bone defect area, to preserve the blood supply of the mucoperiosteal on the lingual side and to create an artificial "four-wall bone bag" to build a favorable space for osteogenesis and to increase the height of the alveolar bone. Histological studies have shown that the osteogenesis speed of "sandwich" osteotomy is fast, and the bone is good. Sandwich osteotomy is suitable for buccal-lingual alveolar bone height defects less than 50% of the implant length or for unilateral defects more than 50% of the implant length. In the operation of "sandwich" osteotomy, the horizonal incision should be 10-12 mm below the crest of the buccal alveolar ridge. The design of the osteotomy line should ensure the height of the osteotomy block and that the mandibular canal does not sustain damage and that it fits the shape of the bone defect. There was no significant difference in the osteogenic effect of different types of bone graft materials used for "sandwich" osteotomy. The osteotomy block was rigorously fixed by a titanium plate, titanium nail, implant and other materials, and finally, the intraoperative area was tensioned and sutured. The effect of bone augmentation was evaluated and compared with other bone augmentation techniques; the evaluation showed that sandwich osteotomy was better for moderate vertical bone defects. This technique is highly sensitive and postoperative transient sensory loss is common. With advances in technology, the application of digital technology and ultrasonic bone knives, the risk of complications is greatly reduced and advances in digital osteotomy will promote apply of "sandwich" osteotomy, which will become a popularized technique for clinical alveolar bone augmentation.

Clinical application of β-tricalcium phosphate artificial bone material for alveolar cleft repair / 口腔疾病防治

Objective@# To investigate the osteogenic effect of β-tricalcium phosphate (β-TCP) and bone morphogenetic protein-2 (BMP-2) in the repair of the alveolar cleft.@*Methods @# Fifty-nine patients with unilateral alveolar cleft who visited Capital Medical University School of Stomatology from January 2016 to May 2021 were included. They were divided into three groups according to the different bone repair materials: autologous bone, β-TCP and BMP-2 +β-TCP. The preoperative and postoperative CBCT data of the patients were imported into Mimics 21.0 software. The preoperative volume of the bone defect and the new volume of bone formation were calculated by the three-dimensional reconstruction method. The osteogenesis rate was calculated to evaluate the osteogenesis effect@*Results@#The wounds in the three groups healed well after the operation, without implant material discharge, infection, dehiscence, rejection or other symptoms. Twelve months after the operation, CBCT scanning and three⁃dimensional reconstruction images of the three groups of patients showed the formation of new bone bridges in the alveolar ridge fissure area. The image density of the new bone tissue was not significantly different from that of normal bone tissue, and the continuity of the maxilla was re⁃ stored to varying degrees. The bone rate of autogenous bone was 65.00% ± 16.66%, β⁃ TCP group and BMP⁃2+ β⁃ The bone composition rate of TCP was 69.82% ± 17.60%, 71.35% ± 17.51%, respectively, and there was no significant dif⁃ ference compared with the autogenous bone group (P = 0.382, P = 0.244). The β⁃TCP and BMP⁃2+ β⁃TCP groups had no significant differences in bone rate (P = 0.789). @*Conclusion@#β⁃TCP could be used to replace autologous bone for alveolar cleft repair. The addition of BMP⁃2 to β⁃TCP did not significantly improve the osteogenesis rate.