Effects of cathodic transcranial direct current stimulation on motor function of upper limbs and fingers in patients with right brain injury / 中国康复理论与实践

ObjectiveTo investigate the effects of cathodic transcranial direct current stimulation (ctDCS) on upper limb and finger dysfunction after right brain injury (RBI). MethodsFrom October, 2020 to May, 2022, 40 RBI patients in Beijing Bo'ai Hospital were randomly divided into control group and experimental group, with 20 patients in each group. All the patients accepted conventional drug treatment, conventional rehabilitation treatment and functional occupational therapy. The cathode electrode was placed in the M1 area of the uninjured side of brain, then the control group received sham stimulation and the experimental group received stimulation, for four weeks. They were assessed with Fugl-Meyer Assessment-Upper Extremities (FMA-UE) and -Finger, and the modified Barthel Index (MBI) before and after treatment. ResultsAfter treatment, the scores of FMA-UE, FMA-Finger and MBI improved in the two groups (t > 5.627, P < 0.001), and improved more in the experimental group than in the control group (t > 2.161, P < 0.05). ConclusionctDCS can effectively improve the motor function of upper limbs and fingers of RBI patients, and improve the ability of activities of daily living.

Biogenic synthesis of selenium nanoparticles by Shewanella sp. HN-41 using a modified bioelectrochemical system

BACKGROUND Synthesis of selenium nanoparticles from selenite by Shewanella sp. HN-41 demonstrated that particle size depended on the reaction time and biomass of cells. The slow reaction and low biomass tended to form small particles. In this study, Shewanella sp. HN-41 was introduced into the anode of a nonexternal circuit bioelectrochemical system (nec_BES) to convert chemical energy from lactate to low electron current to the cathode, where selenite was reduced. RESULTS Our experiment with two systems, one bioelectrochemical system with a cathode flushed with nitrogen and the other with a no-nitrogen-flushing cathode, showed that the former could not produce Se nanoparticles after 21 d, but the latter formed them with an average size of 37.7 nm. The SEM and TEM images demonstrated that the particle size of 10 nm occupied over 10% and most of the particles were in the range of 30­60 nm. The XRD result and SAED image demonstrated no clear peaks of crystal and proved that the Se nanoparticles are amorphous. CONCLUSIONS : The clean Se nanoparticles were synthesized and completely separated from bacterial cells in the bioelectrochemical system. This study opened a new approach for the biological synthesis of metal nanoparticles. Finally, the Se products in the range of 30­60 nm can be tested for antimicrobial activities in medical applications

Determination of Trace Metals in High-purity Silicon Nitride Powderby Solution-cathode Glow Discharge-atomic EmissionSpectrometer Using Slurry Sampling / 分析化学

Trace impurities of Al, Ca, Co, Fe, K, Mg, Mn, Na, Ni in silicon nitride powder were determined by slurry introduction into a solution-cathode glow discharge-atomic emission spectrometer (SCGD-AES).The effect of particle size on the stability of suspension was investigated.A 6-port valve was selected to link sampling system and SCGD-AES, by which the suspension could be introduced into the SCGD-AES to get instantaneous spectrum signal.The calibration curves for quantitative analysis could be established using aqueous standards and the pH of suspension was not required to be adjusted accurately.The applied voltage, solution flow rate, and integral time of PMT were set to 1080 V, 1.2 mL/min and 800 ms, respectively.In this work, slurry sampling was combined with SCGD-AES by a 6 port 2-pos valve.Powder Si3N4 was tested by this way and the limits of detection for all nine elements were 0.2-53.0 mg/kg.The RSDs were 1.1%-5.0%.The detection result of trace impurities in standard reference material ERM-ED101 agreed with that obtained from inductively coupled plasma atomic emission spectrometry.This method was proved to be accurate, reliable and valuable.

Visual Evoked Potential Using Head-Mounted Display Versus Cathode Ray Tube: A Pilot Study

OBJECTIVE: To present a new stimulation method based on the use of a head-mounted display (HMD) during pattern reversal visual evoked potential (PR-VEP) testing and to compare variables of HMD to those of conventional cathode ray tube (CRT). METHODS: Twenty-three normal subjects without visual problems were recruited. PR-VEPs were generated using CRT or HMD stimuli. VEP outcome measures included latencies (N75, P100, and N145) and peak-to-peak amplitudes (N75-P100 and P100-N145). Subjective discomfort associated with HMD was determined using a self-administered questionnaire. RESULTS: PR-VEPs generated by HMD stimuli showed typical triphasic waveforms, the components of which were found to be correlated with those obtained using conventional CRT stimuli. Self-administered discomfort questionnaires revealed that HMD was more comfortable in some aspects. It allowed subjects to concentrate better than CRT. CONCLUSION: The described HMD stimulation can be used as an alternative to the standard CRT stimulation for PR-VEPs. PR-VEP testing using HMD has potential applications in clinical practice and visual system research because HMD can be used on a wider range of subjects compared to CRT.

Development and Evaluation of a High Sensitive Atomic Fluorescence Spectrometric System / 分析化学

A high sensitive hydride generation ( HG) atomic fluorescence spectrometric system was developed using high current microsecond pulsed hollow cathode lamp ( HCMP-HCL) as the excitation source and its performance was evaluated. Test results confirmed that the excitation source could give out intensive atomic spectral lines. System precision (RSD, n=7) was 1. 1% for arsenic and 1. 4% for selenium. Detection limits (DLs, 3) were 0. 0066 μg/L and 0. 0075 μg/L, respectively. The developed AFS system was proved to have high reliability, low detection limit and remarkable improvement of analysis capability compared with that of commercial AFS instruments.

Determination of Trace Metals in Lutetium-Yttrium Orthosilicate by Solution-Cathode Glow Discharge-Atomic Emission Spectrometry / 分析化学

TheLutetium-YttriumOrthosilicate(LYSO)isakindofscintillatingcrystalmaterialwiththebest comprehensive properties. In this work, the trace elements Ca, Fe, K, Li, Mg and Na in LYSO were determined by solution-cathode glow discharge-atomic emission spectrometry ( SCGS-AES ) . The optimal conditions included 0. 1 mol/L HNO3 sample solutions and operation at a voltage at 1080 V with a flow rate of 2. 0 mL/min. The LYSO matrix concentration tolerance of the SCGD source was determined to be 10 g/L. Sample solutions dissolving from several LYSO samples with HF, HNO3 and HClO4 were examined by SCGD-AES. For LYSO samples, the values obtained by SCGD-AES agree well with those obtained by axial inductively coupled plasma-atomic emission spectroscopy ( ICP-AES ) and inductively coupled plasma-mass spectroscopy (ICP-MS). The emissions of Lu and Y were not observed, so that the determination of trace elements in LYSO matrices could be conducted with little interference. The detection limits of Ca, Fe, K, Li, Mg and Na in LYSO were 1. 0, 3. 0, 0. 02, 0. 01, 0. 02 and 1. 0 mg/kg, respectively.

Determination of Water Hardness by Electrolyte Cathode Atmospheric Glow Discharge Atomic Emission Spectroscopy / 分析化学

An electrolyte cathode atmospheric glow discharge atomic emission spectroscopy(ELCAD-AES) has been developed to determine the hardness of water. By the standard curves of Mg and Ca, the concentration curves of Mg and Ca measurement were obtained. The limits of detection of Mg and Ca were 0.2 and 0.8 mg/L, respectively. The precision and recovery were experimentally elucidated, which indicated that the homemade ELCAD-AES system has a good performance. Finally, practical water samples such as tap water, boiled tap water, ground water, boiled ground water and lake water were analyzed by the method. The results were in agreement with those by the EDTA titration. This demonstrates that ELCAD-AES has the capacity for on-line determination of water hardness.

The wave of first-order kernel and second-order kernel of multifocal electroretinogram stimulated with LED / 眼科

Objective To investigate the waveform of the first-order kernel and second-order kernel of muhifocal electroretinogram stimulated with light emitting diode(LED).Design Prospective,noncomparative,interventional case series.Participant 18 subjects(18 eyes)who had been accepted the mfERG test.Method The patients were devided into two groups,they accepted the muhifocal elec- troretinogram(mfERG)stimulated with cathode ray tube(CRT)and LED using the Roland RETI Scan3.15 system.The first-order kernel or the second-order kernel was analyzed.The stimulation time of LED were changed from 1.7ms to 16.7ms.Five different stimulation time of LED in this study were 1/10(1.7ms),3/10(5ms),5/10(8.3ms),7/10(ll.7ms)and 10/10(16.7ms).Main Outcome Measure The summed responses were observed.The waveform,amplitude and implicit times of mfERG summed response were analyzed.Result The waveforms of the first-order kernel stimulated by LED were similar to those of CRT.In the second-order kernels of mfERG,the wave- forms were obviously different from those stimulated by LED and CRT.The P1 wave stimulated by CRT was sharp,but the P1 wave of LED was broad.The N2 wave of LED was deeper.The amplitude of N1 wave and P1 wave were increased,and their implicit times pro- longed with the stimulation times prolonging.Conclusion In the first-order kernel of mfERG,the waveform of the summed response stimulated by LED was similar to that of LED.In the second-order kernel of mfERG,the waveform stimulated by LED was more com- plicated,may be there were more inner retina information.(Ophthalmol CHN,2006,15:351-355)

ENHANCING ADHESION OF TETRAHEDRAL AMORPHOUS CARBON FILMS / 药物分析学报

Objective The high energy ion bombardment technique is applied to enhancing the adhesion of the tetrahedral amorphous carbon (TAC) films deposited by the filtered cathode vacuum arc (FCVA). Methods The abrasion method, scratch method, heating and shaking method as well as boiling salt solution method is used to test the adhesion of the TAC films on various material substrates. Results The test results show that the adhesion is increased as the ion bombardment energy increases. However, if the bombardment energy were over the corresponding optimum value, the adhesion would be enhanced very slowly for the harder material substrates and drops quickly, for the softer ones. Conclusion The optimum values of the ion bombardment energy are larger for the harder materials than that for the softer ones.

Study on atomic absorption spectrometry instrument and its analytical methods / 医疗卫生装备

In this article,the principle of atomic absorption spectrometry and construction of this analyzer are introduced,so that we can exchange and improve our related knowledge as the users increase.