Avaliação clínica de restaurações Classe V em cavidades tratadas com o laser de Er: YAG associado ao uso de sistemas adesivos autocondicionantes / Clinical evaluation of Class V restorations in cavities treated with Er: YAG laser associated with the use of self-etching adhesive systems

O objetivo deste estudo clínico, controlado, randomizado, cego e prospectivo foi de avaliar a efetividade clínica de restaurações em lesões não cariosas (cavidades Classe V) realizadas em superfícies dentais pré-tratadas ou não com laser de Er:YAG e utilizando dois sistemas adesivos autocondicionantes. Este estudo foi realizado com um total de 91 lesões e divididas em 4 grupos (n = 23) :G1(FL): Sem pré-tratamento e utilizando o adesiso FL-Bond II/Shofu; G2 (CF): sem pré-tratamento e utilizando o adesivo Clearfil SE Bond 2/Kuraray Noritake; G3 (Laser + FL): pré-tratamento associado ao uso do FL-Bond II/Shofu e G4 (Laser + CF): pré-tratamento associado ao uso do Clearfil SE Bond 2/Kuraray Noritake Os dentes avaliados foram os pré-molares de ambas as arcadas. A avaliação foi feita imediatamente após o tratamento e ao longo do tempo, em 3, 6 e 12 meses após a finalização da restauração. Para a avaliação da sensibilidade foi considerado a EVA (Escala Visual Analógica) e para a qualidade da restauração o método do USPHS modificado, considerando a avaliação de perda de retenção, integridade marginal, pigmentação marginal, presença de lesão de cárie em margem de restauração, vitalidade pulpar e sensibilidade pós-operatória. Os dados foram registrados em tabelas de frequência, e os escores transformados em postos para a aplicação do teste ANOVA. A significância estatística foi considerada para valores de p<0,05. Para os resultados da avaliação de sensibilidade houve uma diferença estatística significante da sensibilidade ao longo do tempo (p<0,001), sendo que essa diferença se deu a partir da avaliação T1 (48 horas) em todos os grupos. Em relação aos critérios avaliados no USPHS, foram encontrados variações estatísticas em alguns tópicos: Pigmentação marginal - G1 (FL) (p=0,041) e G2 ( Laser + FL) (p=0,009) e Integridade marginal G1(FL)( p=0,036). Os demais grupos e critérios não apresentaram variações estatísticas significantes.Pré-tratamentos com laser Er:YAG podem ser uma alternativa viável em restaurações adesivas do tipo classe V; no entanto, nenhum efeito sinérgico de ambos os tratamentos combinados foi observado.

The objective of this clinical, controlled, randomized, blinded and prospective study was to evaluate the clinical effectiveness of restorations in non-carious lesions (Class V cavities) performed on dental surfaces pre-treated or not with Er:YAG laser and using two adhesive systems self-conditioning. This study was carried out with a total of 91 lesions and divided into 4 groups (n = 23) :G1(FL): No pre-treatment and using the FL-Bond II/Shofu adhesive; G2 (CF): without pre-treatment and using Clearfil SE Bond 2/Kuraray Noritake adhesive; G3 (Laser + FL): pre-treatment associated with the use of FL-Bond II/Shofu and G4 (Laser + CF): pre-treatment associated with the use of Clearfil SE Bond 2/Kuraray Noritake The teeth evaluated were the premolars of both arcades. Assessment was performed immediately after treatment and over time, at 3, 6, and 12 months after completion of the restoration. The VAS (Visual Analogue Scale) was used for the sensitivity assessment and the modified USPHS method for the quality of the restoration, considering the assessment of loss of retention, marginal integrity, marginal pigmentation, presence of caries in the restoration margin. , pulp vitality and postoperative sensitivity. Data were recorded in frequency tables, and the scores were transformed into ranks for the application of the ANOVA test. Statistical significance was considered for values of p<0.05. For the results of the sensitivity evaluation, there was a statistically significant difference in sensitivity over time (p<0.001), and this difference occurred from the T1 evaluation (48 hours) in all groups. Regarding the criteria evaluated at the USPHS, statistical variations were found in some topics: Marginal pigmentation - G1 (FL) (p=0.041) and G2 (Laser + FL) (p=0.009) and Marginal integrity - G1(FL)( p =0.036). The other groups and criteria did not present significant statistical variations. Pretreatments with Er:YAG laser can be a viable alternative in class V adhesive restorations; however, no synergistic effect of both treatments combined was observed.

Restorative materials for restorations of non-carious cervical lesions: an overview

Objective: To review the available scientific literature on the restorative treatment of non-carious cervical lesions; in particular, the restorative materials that present optimal performance in this type of clinical situation. Methods: A literature review was performed using Pubmed search engine with the aim of determining the ideal restorative material for restorations of non-carious cervical lesions. Results: Beautifil II (Shofu INC.) restorative material showed satisfactory results in terms of fracture resistance, flexural strength and excellent aesthetics, in addition to components that act as anti-cariogenic, anti-plaque and oral pH balance. The Clearfil SE Bond adhesive (Kuraray NORITAKE) showed in clinical research the highest bond strength rate compared to other adhesive systems available in the dental market. Conclusion: Non-carious cervical lesions are multifactorial lesions that require the professional knowledge to conduct the treatment effectively. The Shofu Beautifil II showed the best results in fracture resistance, flexural strength and excellent aesthetics, it has anticariogenic potential, anti-plaque bacteria and contributes to the oral pH balance. The Clearfil SE Bond adhesive showed the highest retention rate among its competitors.

Robert’s uterus: a rare mullerian anomaly mystery unfolded

Anomalies of female genital tract may not be detected until after menarche when they present a cyclical pain due to outlet obstruction. Mullerian anomalies represent a vast array of structural abnormalities resulting from improper development and fusion of embryological mullerian ducts. 19-year-old girl attained menarche at the age of 14, had progressive dysmenorrhoea and diagnosed as right haemotosalphinx and ovarian endometrioma which were removed in 2008. As pain progressed, she underwent laparoscopic adhesiolysis in 2013. Since, pain persisted, diagnosed as right haematometra, and drainage done by laparotomy. Left adnexa were normal. She was given depot provera till she completed schooling. She developed recurrent dysmenorrhoea after stopping depot provera. USG and MRI revealed recurrent haematometra on right side with normal left horn. The possibility of atypical septum was thought about and hystero laparoscopy was done. It showed right side haemetometra with absent right adnexa. Left adnexa normal. Hysteroscopy showed normal left horn with septum with a bulge towards the left side. Hence, proceeded with hysteroscopic septostomy and haemetometra was drained to the left horn. Later patient was free from dysmenorrhea and repeat hysteroscopy was found to be normal. This case highlighting mullerian anomalies have to be considered when young girls present with severe progressive dysmenorrhoea and diagnosis remains a challenge most of the clinicians. This rare entity has to be kept in mind while evaluating such patients. Prompt diagnosis and early surgical correction are essential to avoid future morbidity in the form of repeated unnecessary surgeries.

The effectiveness of minimal flap surgery in the treatment of sub-gingival class V cavities / 实用口腔医学杂志

Objective:To evaluate the effectiveness of minimal flap surgery in the treatment sub-gingival caries ( class V cavities) . Methods:57 teeth(4 incisors, 13 canines, 38 premolars and 2 molars) with sub-gingival caries in 42 patients were treated by com-bined gingival flap surgery. Sub-gingival caries was fully exposed and the lesion was fully removed, then the deffects were filled with flowing resin. Before operation, 6 and 12 months after treatment, PD, SBI and gingival recession were examined. Results:Success rate of the treatment was 98. 25%. No statistically significant difference of the indexes was found during 12-month-follow up. Conclu-sion:Minimal flap surgery is effective for the treatment of sub-gingival caries ( class V cavities) .

Effect of occlusal restoration on stresses around class V restoration interface: A finite-element study.

Background: Causes of failures in class V restorations have always been controversial until now, since the biomechanical aspects of these restorations have been understood. Aims and Objective: This study was aimed to verify the hypothesis that eccentric forces are the cause of cuspal flexure, which lead to excessive stresses at the periphery of a class V restoration, further it identifies the amount of the stress and the flexure increase in the presence of an occlusal restoration using different restorative materials to restore (both cervical and occlusal) along with their comparison with respect to amount of stresses around the cervical restorations. Materials and Methods : The study was done by modeling a mandibular first premolar which was sectioned bucco-lingually, in the NISA, EMRC II finite element software. A 100N eccentric load was applied on the tooth structure and stresses were observed at the peripheries of the class V restoration when it was restored with composite and with glass ionomer cement. The stresses were further analyzed in the presence of occlusal restorations with different materials and configurations. Results: It was seen that the stresses at the gingival wall interface in case of class V glass ionomer cement was more than that for composite. In the presence of an occlusal amalgam restoration, the cuspal flexure was more than that of occlusal composite and the stresses at the class V peripheries were also statistically significant. Conclusion: It was suggested that lower modulus composites can flex with the tooth structure decreasing the bond failure and that the stresses are much lesser when there is absence of an occlusal restoration. Occlusal composite restorations reinforce the tooth structure and reduce the cuspal flexure as compared to silver amalgam.

Effect of load cycling on nanoleakage of butt joint and beveled occlusal enamel margins in class V composite resin restorations / Efeito do ciclo de carga na nanoinfi ltração de margens de esmalte oclusal com e sem bisel em restaurações classe V

Objectives: This study evaluated the infl uence of mechanical and thermal cycling on the nanoleakageof Class V composite resin restorations with and without enamel beveling. Material and method:Using 60 Class V cavities prepared on the buccal surfaces of human molars, specimens were dividedinto two groups (n = 30) based on the confi gurations of the enamel cavosurface margins. (beveled andnon-beveled) After restoring the cavity preparations with a fl owable composite, half of the specimenswere mechanically load-cycled. The specimens were sealed leaving a 1 mm window around the cervicaland enamel margins. Specimens were placed in a 50% (W/V) silver nitrate solution then immersedin photodeveloping solution and exposed to fl uorescent light for 8h. The teeth were buccolinguallysectioned, gold sputter coated and examined with a SEM to evaluate the nanoleakage values. The datawere analyzed using two-way ANOVA (α = 0.05). Results: Enamel margin confi guration had no significant effect on nanoleakage (p > 0.05). However, the nanoleakage value was signifi cantly higher inthe load-cycled group than in the group not load-cycled (p < 0.05). Conclusion: Since enamel margin confi guration does not affect nanoleakage, there is no need to bevel enamel margins of Class V cavitypreparations for composite restorations.

Objetivos: O presente estudo avaliou a infl uência dos ciclos de carga mecânico e térmico na nanoinfi ltração derestaurações Classe V em resinas compostas, com e sem biselamento do esmalte. Material e método: Os espécimes(60 cavidades Classe V preparadas na superfície vestibular de molares humanos) foram divididos em dois grupos(n = 30) baseados nas confi gurações das margens cavosuperfi ciais do esmalte (biseladas e não biseladas). Após restauraçãodos preparos cavitários com um compósito tipo fl ow, metade dos espécimes foi carregada mecanicamente.Os espécimes foram selados mantendo janela de 1 mm em torno das margens cervical e de esmalte. Os espécimesforam colocados em solução de nitrato de prata (50%), imersos na sequência em solução processadora fotográfi cae expostos à luz fl uorescente por oito horas. Os dentes foram cortados em sentido vestíbulo-lingual, revestidos emouro e observados em microscopia eletrônica para avaliar os valores de nanoinfi ltração. Os dados foram analisadospelo ANOVA (α = 0,05). Resultados: A confi guração das margens do esmalte não teve efeito signifi cante nananoinfi ltração (p > 0,05). Entretanto, os valores da nanoinfi ltração foram signifi cativamente mais altos no grupode carga que no grupo sem carga (p > 0,05). Conclusão: Uma vez que a confi guração da margem do esmalte nãoafeta a nanoinfi ltração, não há necessidade de biselar as margens do esmalte nos preparos de cavidades Classe V emrestaurações de compósitos.

Mouthguard for relief of repeated clenching stress to cervical restorations during exercises / 대한치과보존학회지

Mouthguards were used to protect boxers from lip lacerations and other soft tissue injuries in the late 19th century. Now they are used various parts of dental treatment, which are sports protective aid, bleaching tray, orthodontic retainer, implant insertion guide tray, splint and so on. Repeated dislodgement of Class V restoration due to habitual clenching stress should be restored with stress control. Mouthguard can be used as stress relief device. This case describes methods that can relieve occlusal force to teeth by using mouthguard. Satisfactory results can be obtained by using mouthguard for retention of repeated dislodgement Class V restorations. If patients suffered from repeated restorations of Class V due to clenching, mouthguard can be used additional device to relieve the occlusal stress in conservative dentistry.

Comparison of marginal microleakage between low and high flowable resins in class V cavity / 대한치과보존학회지

The purpose of this study was to compare the microleakage of low and high viscosity flowable resins in class V cavities applied with 1-step adhesives. Forty class V cavities were prepared on the cervices of buccal and lingual surfaces of extracted molar teeth and divided into four groups (n=8). Cavities were restored with AQ Bond Plus/Metafil Flo alpha, G-Bond/UniFil LoFlo Plus (Low flow groups), AQ Bond Plus/Metafil Flo and G-Bond/UniFil Flow (High flow group), respectively. Specimens were immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed microleakages at the enamel and dentinal margins. In conclusion, the low viscosity flowable resins showed lower marginal microleakage than do the high viscosity flowable resins in class V cavities.

The effects of dentin bonding agent thickness on stress distribution of composite-tooth interface : Finite element method / 대한치과보존학회지

The aim of this study was to examine that thick dentin bonding agent application or low modulus composite restoration could reduce stresses on dentin bonding agent layer. A mandibular first premolar with abfraction lesion was modeled by finite element method. The lesion was restored by different composite resins with variable dentin bonding agent thickness (50microm, 100microm, 150microm). 170N of occlusal loading was applied buccally or lingually. Von Mises stress on dentin bonding agent layer were measured. When thickness of dentin bonding agent was increased von Mises stresses at dentin bonding agent were decreased in both composites. Lower elastic modulus composite restoration showed decreased von Mises stresses. On root dentin margin more stresses were generated than enamel margin. For occlusal stress relief at dentin boning agent layer to applicate thick dentin bonding agent or to choose low elastic modulus composite is recommended.

Effects of non-carious cervical lesions and class V restorations on periodontal conditions / 대한치주과학회지

PURPOSE: The non-carious cervical lesion(NCCL) is a loss of tooth structure at the neck of affected teeth that is unrelated to tooth caries. The reported prevalence of NCCL varies from 5% to 85%. Prevalence and severity of lesions have been found to increase with age. They are becoming more significant as people live longer and become more aware of the importance of oral health. The purposes of this study were first, to examine the periodontal conditions associated with NCCL, and second, to investigate the clinical effects of class V restorations of NCCL on periodontal tissues. MATERIALS AND METHODS: The sample size was 982 teeth of 50 subjects(25 male, mean age 52+/-7) who were seen at the Department of Periodontology, Pusan National University Hospital. At the baseline examination, clinical periodontal parameters were measured. After the initial examination, 24 patients who were absent from hypersensitivity were selected. The teeth with NCCL were randomly divided into the test and control groups. The teeth in the test group were restored with flowable resin; the control teeth were not restored. Six months later, the clinical examinations were repeated. The data were analyzed using the SPSS program. RESULTS: The results were as follows: 1) NCCL occurred on 45.8% of examined teeth. The percentage of affected teeth was higher in maxillary and premolar teeth. 2) The shallow saucer type was the most common. 3) Teeth with NCCL had more gingival recession, lower attachment level, and higher incidences of bleeding on probing(BOP) and plaque than NCCL-free teeth. 4) Six months later, gingival recession, attachment level, the percentages of BOP and plaque in the test group were lower than in the control group(p<0.05). CONCLUSION: NCCLs were more found in maxillary teeth, especially in premolar teeth. The results suggest that the restoration of NCCL could affect some periodontal parameters favorably

The Effect of Three Surface Sealants on Microleakage of Class V Composite Resin Restorations / 대한치과보철학회지

STATEMENT OF PROBLEM: Microleakage at the occlusal and gingival margin of Class V cavities restored with composite resin has traditionally been considered an obstacle to successful restoration. PURPOSE: The aim of this study was to assess the effectiveness of three different surface sealants(Fortify, Permaseal and Biscover LV) on the marginal sealing of Class V light-activated composite resin restorations(Z250). MATERIAL AND METHODS: Forty noncarious human premolars and molars extracted within a three-month period were selected. Class V cavities with the occlusal margin in enamel and gingival margin in cementum were prepared in both buccal and lingual surfaces. The teeth, randomly assigned in four groups with twenty cavities in each group, were restored with composite resin after applying an adhesive system(Clearfil SE bond). After the finishing and polishing procedures, the restorations were covered with a specific surface sealants, except for the control samples, which were not sealed. After placing restorations, the specimens were thermocycled, and immersed in a 2% methylene blue solution for twenty four hours and sectioned longitudinally. The marginal microleakage was evaluated at the occlusal and gingival interfaces using a microscope and compared among the four groups using ANOVA test and Wilcoxon Rank-Sum test(alpha=0.05). RESULTS: Statistical analysis showed that there was significantly less leakage when the surface sealants were used than there was in control group (P .05). CONCLUSION: Application of surface sealants was an effective method of surface coating in reducing microleakage at occlusal and gingival margins of Class V composite resin restorations. However, it is certain that some microleakage still occurred despite the application of surface sealants, especially gingival margins.

Stress analysis of maxillary premolars with composite resin restoration of notch-shaped class V cavity and access cavity; Three-dimensional finite element study / 대한치과보존학회지

The purpose of this study was to investigate the distribution of tensile stress of canal obturated maxillary second premolar with access cavity and notch-shaped class V cavity restored with composite resin using a 3D finite element analysis. The tested groups were classified as 8 situations by only access cavity or access cavity with notch-shaped class VS cavity (S or N), loading condition (L1 or L2), and with or without glass ionomer cement base (R1 or R2). A static load of 500 N was applied at buccal and palatal cusps. Notch-shaped cavity and access cavity were filled microhybrid composite resin (Z100) with or without GIC base (Fuji II LC). The tensile stresses presented in the buccal cervical area, palatal cervical area and occlusal surface were analyzed using ANSYS. Tensile stress distributions were similar regardless of base. When the load was applied on the buccal cusp, excessive high tensile stress was concentrated around the loading point and along the central groove of occlusal surface. The tensile stress values of the tooth with class V cavity were slightly higher than that of the tooth without class V cavity. When the load was applied the palatal cusp, excessive high tensile stress was concentrated around the loading point and along the central groove of occlusal surface. The tensile stress values of the tooth without class V cavity were slightly higher than that of the tooth with class V cavity.

Stress distribution of Class V composite resin restorations: A three-dimensional finite element study / 대한치과보존학회지

This study was to investigate the influence of composite resins with different elastic modulus, cavity modification and occlusal loading condition on the stress distribution of restored notch-shaped noncarious cervical lesion using 3-dimensional (3D) finite element (FE) analysis. The extracted maxillary second premolar was scanned serially with Micro-CT. The 3D images were processed by 3D-DOCTOR. ANSYS was used to mesh and analyze 3D FE model. A notch-shaped cavity and a modified cavity with a rounded apex were modeled. Unmodified and modified cavities were filled with hybrid or flowable resin. After restoration, a static load of 500N was applied in a point-load condition at buccal cusp and palatal cusp. The stress data were analyzed using analysis of principal stress. The results were as follows: 1. In the unrestored cavity, the stresses were highly concentrated at mesial CEJ and lesion apex and the peak stress was observed at the mesial point angle under both loading conditions. 2. After restoration of the cavity, stresses were significantly reduced at the lesion apex, however cervical cavosurface margin, stresses were more increased than before restoration under both loading conditions. 3. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin. 4. Cavity modification the rounding apex did not reduce compressive stress, but tensile stress was reduced.

Microleakage of 2-step adhesive systems in diamond-prepared cavity / 대한치과보존학회지

The purpose of this study was to compare the marginal microleakage of different 2-step adhesive systems in Class V cavities prepared with different diamond points. Forty Class V cavities were prepared with two different (coarse or fine) diamond points on cervical third of extracted molars. The occlusal and gingival margin of cavities was located in enamel and dentin, respectively. They were divided into one of four equal groups (n = 10) and ; Group 1-prepared with coarse diamond point (EX-41), restored with Single Bond and Z 250, Group 2-prepared with fine diamond piont (TF-21F), restored with Single Bond and Z 250, Group 3-prepared with coarse diamond point (EX-41), restored with Clearfil SE Bond and Clearfil AP-X, Group 4-prepared with fine diamond point (TF-21F), restored with Clearfil SE Bond and Clearfil AP-X. Specimens were thermocycled, immersed in a 2% methylene blue solution for 24 hours, and bisected longitudinally. They were observed leakages at enamel and dentinal margins. Data were analyzed using Mann-Whitney and Wilcoxon signed ranked test. In this study, marginal microleakage of Single Bond was not affected by type of diamond points. But Clearfil SE Bond showed higher marginal microleakage at both enamel and dentinal margin when Class V cavity was prepared with coarse diamond point.

The effect of restorative materials on the stress distribution of class V composite resin restorations: a 3D finite element investigation / 대한치과보존학회지

The purpose of this study was to analyze the stress distribution aspect of unrestored and restored combined shape (wedge shape occlusally and saucer shape gingivally) class V cavity, which found frequently in clinical cases. A maxillary second premolar restored with a combined shape class V composite restorations were modeled using the three dimensional finite element method. Static occlusal load of 170 N was applied on lingual incline of buccal cusp at the angle of 45degrees with the longitudinal axis of the tooth. And three dimensional finite element analysis was taken by ANSYS (Version 6.0, Swanson Analysis System Co., Houston, U.S.A) program which represent the stress distribution on unrestored and restored cavity wall and margin. The conclusions were as follows. 1. Compared to the unrestored cavity, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced and in restored cavity. 2. Von Mises stress at the occlusal and cervical cavity margin and wall were increased in restored cavity in comparison with the unrestored cavity. 3. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the cementoenamel junction and line angle of the cavity base were reduced more than in the flowable restoration. 4. In the hybrid and hybrid/flowable composite resin restoration, Von Mises stress at the occlusal and cervical cavity margin and wall were increased more than in the flowable restoration.

Estimation of relation between techniques of dye penetration for microleakage and SEM evaluation for marginal adaptation of the restoration / 대한치과보존학회지

The purpose of this study was to estimate the relation between techniques used for microleakage from dye penetration and for marginal adaptation from SEM evaluation of the restoration. Using high speed #330 bur, class V cavities (4 x 3 x 1.5 mm around CEJ) were prepared on the buccal surface of 20 extracted human molars. Six dimples as reference points for SEM and dye penetration evaluation were made with 1/2 round bur. Cavity was bulk filled with microhybrid composite resin (Esthet X) and all-in-one adhesive (Xeno III). Teeth were stored in saline solution for one day, after then, they were finished and polished using Sof-Lex system. Fifty percent silver nitrate dye solution was used for the evaluation of microleakage and resin replica was used for marginal adaptation. All of these were done after 1000 times thermocycling between 5 and 55degrees C. Vertical sections were made through three dimples of restoration to obtain samples for the evaluation of dye penetration and inner marginal adaptation. Outer adaptational estimation was done with an intact restoration before sectioning. Dye penetration was determined in three degrees and percentage of outer and inner leaky margin was estimated from SEM image. The data were analysed statistically: Spearman's rho test were used to check relationships between two methods. The result were as follows: 1. There were significant relationships between degree of dye penetration and inner and outer marginal adaptations each (p < 0.01). 2. However, there was no significant relationship between the results of inner and outer marginal adaptation. Within the results of this study, relationship between the percentage of marginal adaptation and microleakage shows significant relationship. However, inner and outer marginal adaptation did not show any significant relationship mutually.

Effect of resin sealants on the reduction of microleakage in composite restorations / 대한치과보존학회지

The purpose of this study was to compare the ability of three resin surface sealants to prevent microleakage in Class V composite resin restorations. Forty Class V cavities with the occlusal margin in enamel and gingival margin in dentin were prepared on the buccal surfaces of sound extracted molars, and restored with composite resin. Restorations were randomly assigned into one of four equal groups (n = 10): a control group, without resin sealing, and three experimental groups in which margins were sealed with Fortify Plus, Biscover and Permaseal, respectively. Specimens were thermocycled, immersed in a 2% methylene blue solution for 4 hours, sectioned longitudinally, and observed the leakage at the occlusal and gingival margins. The result was analyzed using Kruskal-Wallis test, Mann-Whitney test and Wilcoxon signed rank test. In conclusion, the ability to reduce microleakage at occlusal margins was similar in all of three sealants. However at gingival margin, it depended on the type of used resin surface sealant. At gingival margin, control and Fortify Plus group showed statistically higher microleakage than PermaSeal group, and Fortify Plus group also showed higher microleakage than BisCover group (p < 0.05).

Prospective clinical evaluation of three different bonding systems in class V resin restorations with or without mechanical retention / 대한치과보존학회지

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin, Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p > 0.05). There was also no significant difference between the groups with or without mechanical retention (p > 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.

Effect of biscover on the marginal microleakage of composite resin restoration / 대한치과보존학회지

The purpose of this study was to compare the effect on marginal leakage of a resin surface sealant (Biscover) applied before or after polymerization of composite resin to unsealed composite restorations. Thirty Class V cavities with the occlusal margin in enamel and cervical margin in dentin or cementum were prepared on the buccal surfaces of sound extracted molars and restored with a microfilled light-cured composite resin (Micronew). Restorations were randomly assigned into one of three equal groups (n = 10): a control group - no surface sealing, group 1 - applied Biscover after polymerization of the composite resin, and group 2 - applied Biscover before polymerization of the composite resin. Specimens were thermocycled, immersed in a 2% methylene blue solution for 4 hours, sectioned longitudinally, and analyzed for leakage at the occlusal and gingival margins. The results of this study were as follows; 1. In sealed group, group 2 showed higher microleakage than group 1 at both occlusal and gingival margins, but there was no significant difference between two groups (p > 0.05). 2. Unsealed control group showed a little higher microleakage than sealed group at occlusal margins, and a little higher or similar microleakage than sealed group at gingival margins (p > 0.05). 3. Control group and group 2 showed significantly less microleakage at the occlusal margins, but group 1 showed no significantly difference between microleakage at the occlusal and gingival margins.

Marginal microleakage of single step adhesives / 대한치과보존학회지

This study evaluated the marginal microleakage of five single step adhesives. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of the single step adhesives and composite resins: Prompt L-Pop/Filtek Z-250 (Group 1), AQ Bond/Metafil CX (Group 2), One-Up Bond F/Palfique Toughwell (Group 3), Futurabond/Admira (Group 4), Xeno III/Spectrum TPH (Group 5). The restored teeth were thermocycled. Microleakage was assessed by dye penetration using 2% methylene blue dye solution. The teeth were bisected buccolingually and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kruskal-Wallis test and Mann-Whitney tests. The results of this study were as follows; 1. Microleakage of enamel margins in group 3 was statistically higher than that in groups 1, 2, 4, 5 (p < 0.05). 2. Microleakage of dentin margins in group 1 was statistically higher than that in groups 2, 5, and that in group 3 was statistically higher than that in groups 2, 4, 5 (p < 0.05). 3. Dentin marginal microleakage was higher than enamel marginal microleakage in all experimental groups. In conclusion, Prompt L-Pop showed the least leakage at enamel margin, and AQ Bond showed at dentin margin in this study. Marginal miroleakage in dentin was higher than that in enamel.