Cone-beam computed tomography study of root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in high-angle Class Ⅱ open bite patients / 口腔疾病防治

Objective@#This study aimed to explore the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology in patients with high-angle skeletal Class Ⅱ open bite, aiming to provide a reference for clinical treatment.@*. Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. CBCT images of eighty-one untreated patients (40 anterior open bite patients and 41 normal overbite patients) with high-angle skeletal Class Ⅱ malocclusion were selected before treatment. Dolphin software was used to study the root length of maxillary and mandibular anterior teeth and central incisor crown-root morphology, and the differences between the two groups were analyzed.@*Results@#There was no statistical significance in the root length of maxillary lateral incisor and canine between the open bite group and the normal overbite group, significant differences were found in the root length of maxillary central incisor （11.12 ± 1.37） mm、mandibular central incisor（10.15 ± 1.09）mm, mandibular lateral incisor（11.27 ± 1.15）mm and mandibular canine（12.81 ± 1.48）mm between the open bite group and the normal overbite group（P<0.05）. On the other hand, the two groups were significantly different in crown-root morphology of the maxillary central incisor (1.10° ± 3.62° vs. 4.53° ± 2.30°, P<0.01) but not in the mandibular central incisor.@*Conclusion@#The root length of the maxillary central incisor, mandibular central incisor, mandibular lateral incisor, mandibular canine in high-angle Class Ⅱ open bite patients is shorter than that in high-angle Class Ⅱ normal overbite patients, and the long axis of the crown of the maxillary central incisor in high-angle Class Ⅱ open bite patients obviously deviates toward the labial side relative to the long axis of the root. The crown-root angle is smaller, which is beneficial to torque control or adduction movement of the anterior teeth in high-angle Class Ⅱ open bite patients.

CBCT analysis of the relative position between maxillary central incisors and alveolar bone in Southern Chinese adults / 口腔疾病防治

Objective@#Exploring the position and bone wall thickness characteristics of the maxillary central incisors in Southern Chinese adults to provide a clinical reference for the design of immediate maxillary central incisor implantation surgery.@*Methods@#The hospital ethics committee approved the study, and the patients provided informed consent. CBCT images of 990 adult patients (aged 20-79 years) from the Stomatology Hospital (January 2018 to December 2021) were categorized based on the dental arch form and age-sex groups. Sagittal CBCT images of the maxillary central incisors were used to measure the labial and palatal bone thickness wall at 4 mm the CEJ to apical, the middle of the root, and the angle between the tooth long axis and the long axis of the alveolar process, to compare the thickness of the labial and palatal bone walls in samples of male and female patients, and to explore the relationship between the angle between the tooth long axis and the alveolar process long axis in samples of male and female patients in different age groups (20-39 years; 40-59 years; 60-79 years).@*Results@#Significant differences were found in the labiopalatine side of the alveolar bone of the maxillary incisor root position. A total of 95.8% (948/990) of the maxillary incisors were positioned more buccally, 4.1% (41/990) were positioned more midway, and 0.1% (1/990) were positioned more palatally. The thicknesses of the bone wall at the CEJ of 4 mm below the palatal side, the middle of the root, and at the apex were greater (1.82 ± 0.56 mm, 3.20 ± 1.10 mm, and 7.70 ± 2.00 mm, respectively) than those at the labial side (1.21 ± 0.32 mm, 0.89 ± 0.35 mm, and 1.86 ± 0.82 mm, respectively), with statistical significance (P<0.05). Male bone wall thickness was generally greater than female bone wall thickness (P<0.05). The angle between the long axis of male teeth and the alveolar bone was 14.77° ± 5.66°, while that of female teeth was 12.80° ± 5.70°, with a statistically significant difference (P<0.05). The angle between the long axis of teeth and the alveolar bone in the 40-59-year-old group and the 60-79-year-old group was greater than that in the 20-39-year-old group, and the difference was statistically significant (P<0.05).@*Conclusion@#A total of 95.8% of adults in South China have maxillary central incisors with root deviation toward the labial bone cortex. The thickness of the labial bone wall is much thinner than that of the labial bone wall, which is the middle of the thickness of the root. In Southern Chinese adults, the angle between the upper central incisor and the long axis of the alveolar bone in males is greater than that in females, and the degree of the angle increases with age. It is recommended to pay attention to the thickness of the bone wall around the root and the angle between the teeth before immediate implantation surgery to choose a reasonable implantation plan.

The impact of synthetic bone grafting for tissue regeneration: an in vivo study

Aims: This study aimed to examine the biological response of synthetic nanocomposite material on canine mandibular bone. Methods: Nine healthy adult male local breed dogs aged 12 to 18 months and weighing 10.2 to 15.2 kg were used in the study. Based on healing intervals of 1 and 2 months, the dogs were divided into 2 groups. Each group had 3 subgroups with 3 dogs each. The division was based on the grafting material used to fill the created defect: an empty defect (Control-ve), Beta-Tricalcium Phosphate, and nanocomposite (Beta-Tricalcium Phosphate and nanosilver 1%) . Surgery started after the dogs were anaesthetized. The surgical procedure began with a 5 cm parallel incision along the mandible's lower posterior border. After exposing the periosteum, a three 5mm-diameter, 5-mmdeep critical-size holes were made, 5mm between each one. Each group's grafting material had independent 3 holes. The defects were covered with resorbable collagen membranes followed by suturing of the mucoperiosteal flap. Results: Total densitometric analysis showed no significant differences between groups at 1-month intervals, with the nanocomposite group having a higher mean rank (165.66± 31.21) in comparison to other groups while at 2 months intervals that there was a highly significant difference between three groups as the P-value was (0.000) with the nanocomposite group having a higher mean rank (460.66± 26.40). Conclusions: In the current study, the use of nanocomposites improved osteoconductivity by accelerating new bone formation. Moreover, the encorporation of nanosilver enhanced growth factor activity. These attributes make nanocomposites a promising material for enhancing the bone healing process

Frecuencia de Signos Óseos de Osteoartritis en la Articulación Temporomandibular en una Población Adulta Chilena Mediante CBCT, Durante 2021-2022

La osteoartritis (OA) de la articulación temporomandibular (ATM) es un desorden degenerativo de etiología multifactorial, que requiere un manejo interdisciplinario. Es considerada como la enfermedad degenerativa más frecuente de la articulación. Por esto es importante conocer lo más preciso posible las estructuras internas del área donde se requiere realizar la intervención o tratamiento, en este caso la ATM. Para esto existen distintos exámenes radiográficos complementarios como: tomografía computarizada, resonancia magnética y por último la tomografía computarizada de haz cónico (CBCT), debido a su capacidad de visualizar tridimensionalmente y con buena definición las estructuras óseas y distintas patologías o alteraciones presentes. A pesar de esto, no hay suficiente evidencia actual que demuestre la frecuencia de signos óseos de osteoartritis presentes en ATM según edad y sexo en la población Chilena. El objetivo este trabajo consistió en Determinar frecuencia de los signos óseos en osteoartritis de ATM mediante CBCT en una población adulta Chilena atendida en un centro radiológico durante los años 2021-2022. Se realizó un estudio observacional descriptivo, donde se observó informes radiológicos de CBCT en pacientes adultos atendidos en el centro radiológico privado de Valdivia durante el periodo del primer semestre del 2021 a primer semestre 2022. Se evaluó la presencia de los siguientes signos óseos imagenológicos: aplanamiento de superficie articular, erosión superficial, osteofitos condilares, esclerosis subcondral, quistes subcortical, esclerosis generalizada, cuerpos libres intraarticulares, reabsorción completa y parcial de la cabeza condilar y trabeculado heterogéneo. De un total de 101 exámenes, 70 exámenes fueron considerados válidos para este estudio según los criterios de selección. Los 31 exámenes restantes no calificaron según los criterios o no presentaban osteoartritis de ATM. De los 70 pacientes 58 pertenecían a mujeres y 12 a hombres. El promedio de edad fue de 37,2 años. Los signos imagenológicos más frecuentes fueron: Trabeculado heterogéneo, Aplanamiento de la superficie articular, Esclerosis subcondral condilar.

Osteoarthritis (OA) of the temporomandibular joint (TMJ) is a degenerative disorder of multifactorial etiology, requiring interdisciplinary management. It is considered the most common degenerative joint disease. For this reason, it is important to know asprecisely as possible the internal structures of the area where the intervention or treatment is required, in this case the TMJ. For this purpose, there are several additional radiographic examinations such as: computed tomography, magnetic resonance imaging and finally cone-beam computed tomography (CBCT), due to its ability to visualize three-dimensionally and with good definition the bone structures and different pathologies or present alterations. Despite this, there is not enough current evidence to demonstrate the frequency of osteoarthritis bone signs present in TMJ according to age and gender in the Chilean population. The aim of this study was to determine the frequency of bone signs of TMJ osteoarthritis through CBCT in a Chilean adult population attended in a radiological center during 2021-2022. A descriptive observational study was made, where CBCT radiological reports were observed in adult patients attended in a private radiological center in Valdivia during the first semester of 2021 to the first semester of 2022. The presence of the following imaging bone signs was evaluated: flattening of the articular surface, surface erosion, condylar osteophytes, subchondral sclerosis, subcortical cysts, generalized sclerosis, intraarticular free bodies, complete and partial reabsorption of the condylar head and heterogeneous trabeculate. Of a total of 101 examinations, 70 examinations were considered valid for this study according to the selection criteria. The remaining 31 examinations did not qualify according to the criteria or did not present TMJ osteoarthritis. Of the 70 patients, 58 were female and 12 were male. The average age was 37.2 years. The most frequent imaging signs were: heterogeneous trabeculation, flattening of the articular surface, subchondral condylar sclerosis.

O uso do planejamento virtual na cirurgia ortognática / The use of virtual planning in orthognathic surgery

Introdução: A cirurgia ortognática envolve manipulação da arquitetura óssea facial, através de osteotomias, para restaurar a forma e a função, corrigindo a má oclusão, as desproporções maxilomandibulares e assimetrias faciais. O planejamento virtual em cirurgia ortognática é realizado com ajuda de softwares que utilizam as medidas reais do esqueleto craniofacial e registros da oclusão do paciente, através de uma análise 3D. Método: Foram avaliados 18 pacientes com deformidades dentofaciais, de acordo com a classificação de Angle submetidos a cirurgia ortognática com o uso do planejamento virtual, entre 2018 e 2019. Os critérios de inclusão foram pacientes entre 16 e 60 anos com desproporções maxilo-mandibulares nas quais o tratamento ortodôntico isolado não era suficiente. Os critérios de exclusão foram a presença de lesões císticas ou tumorais nos maxilares e comorbidades clínicas que contraindicavam a cirurgia. O planejamento virtual foi realizado em todos os pacientes, utilizando o software Dolphin® Imaging 11 e os guias cirúrgicos confeccionados em impressora 3D. Resultados: O guia cirúrgico intermediário apresentou adaptação perfeita nas faces oclusais promovendo grande estabilidade para o reposicionamento e fixação da maxila na oclusão intermediária. Os 18 pacientes operados responderam como "totalmente satisfeitos" em relação ao resultado estético-funcional nessa série estudada. Foi encontrada uma semelhança muito grande da posição do esqueleto maxilofacial no planejamento virtual préoperatório e o obtido no pós-operatório, através da avaliação das telerradiografias. Conclusão: O planejamento virtual em cirurgia craniomaxilofacial possui inúmeras vantagens, como diminuição do tempo laboratorial pré-operatório, maior precisão na confecção dos guias cirúrgicos e melhor reprodutibilidade dos resultados simulados.

Introduction: Orthognathic surgery involves the manipulation of facial bone architecture through osteotomies to restore form and function, correcting malocclusion, maxillomandibular disproportions, and facial asymmetries. Virtual planning in orthognathic surgery is carried out with the help of software that uses real measurements of the craniofacial skeleton and records of the patient's occlusion through 3D analysis. Method: 18 patients with dentofacial deformities were evaluated, according to Angle's classification, who underwent orthognathic surgery using virtual planning between 2018 and 2019. The inclusion criteria were patients between 16 and 60 years old with maxylo-mandibular disproportions in which orthodontic treatment alone was not sufficient. Exclusion criteria were the presence of cystic or tumoral lesions in the jaw and clinical comorbidities that contraindicated surgery. Virtual planning was carried out on all patients, using Dolphin® Imaging 11 software and surgical guides made with a 3D printer. Results: The intermediate surgical guide presented perfect adaptation on the occlusal surfaces, promoting great stability for the repositioning and fixation of the maxilla in intermediate occlusion. The 18 operated patients responded as "completely satisfied" in relation to the aesthetic-functional result in this series studied. A very great similarity was found between the position of the maxillofacial skeleton in the preoperative virtual planning and that obtained post-operatively through the evaluation of teleradiography. Conclusion: Virtual planning in craniomaxillofacial surgery has numerous advantages, such as reduced pre-operative laboratory time, greater precision in the creation of surgical guides, and better reproducibility of simulated results.

Contribution of Digital Technology to the Surgical Technique of Miniscrew Insertion: a Literature Review

Orthodontic miniscrews are used to achieve absolute anchorage. Their insertion technique is simple but must be precise to avoid intra- and postoperative complications. This study aimed to review the literature on the role of digital technology in the precise placement of miniscrews and to describe the different stages of the insertion guide manufacturing chain. The databases used were PubMed, Science Direct, and Google Scholar, including the following English descriptors: "Orthodontic Anchorage Procedures," "Cone Beam Computed Tomography." Digital technology improves the accuracy of miniscrew placement by using 3D imaging to assess the quantity and quality of bone and the proximity of anatomical structures in the area to be implanted. By combining 3D imaging with the new techniques of 3D printing and virtual planning, the orthodontist can obtain a personalized placement guide for the patient using computer-aided design and manufacturing techniques. A digitally-assisted miniscrew insertion system is a promising technique for precise and safe miniscrew insertion but cannot be used routinely. Therefore, large-scale studies are needed to map miniscrew insertion in different areas, considering ethnicity, gender, and different anatomical characteristics.

A Importância dos Métodos de Determinação das Idades Esquelética e Dentária na Ortodontia e Odontopediatria ­ uma Revisão de Literatura / The Importance of Methods for Determination of Squeletal and Dental Age in Orthodontics and Pediatric Dentistry ­ a Literature Review

O estágio de desenvolvimento humano é intimamente relacionado à sua maturidade óssea ou dentária, sendo essencial para a escolha do tratamento de alterações dentofaciais em crianças e adolescentes por ortodontistas e odontopediatras. Existem diversos indicadores biológicos para determinar a maturação do indivíduo, como a idade cronológica e as alterações hormonais, porém esses indicadores podem sofrer interferências. Visando uma determinação de desenvolvimento e dos picos de crescimento mais precisa, para um melhor diagnóstico e plano de tratamento, foram desenvolvidos diversos métodos para determinar a idade esquelética e a idade dentária, sendo estes a avaliação da maturação carpal, da morfologia das vértebras cervicais, da fusão óssea da sincondrose esfeno-occipital e da sutura palatina mediana, bem como dos estágios da calcificação dentária. A avaliação das radiografias de mão e punho é o padrão ouro da predição da idade esquelética, e sua correlação com outros métodos já é evidente. Sendo assim, é possível utilizar a avaliação das vértebras cervicais e das idades dentárias de Nolla e Demirjian.

The stage of human development is closely related to bone or dental maturity, being essential for the choice of treatment for dentofacial changes in children and adolescents by orthodontists and pediatric dentists. There are several biological indicators to determine an individual's maturation, such as chronological age and hormonal changes, but these indicators can suffer interference. Aiming at a more accurate determination of development and growth peaks, for a better diagnosis and treatment plan, several methods have been developed to determine skeletal age and dental age, these being the assessment of carpal maturation, the morphology of the cervical vertebrae, bone fusion of the spheno-occipital synchondrosis and the median palatal suture, as well as the stages of dental calcification. The evaluation of hand and wrist radiographs is the gold standard for predicting skeletal age, and its correlation with other methods is already evident. Therefore, it is possible to use the assessment of cervical vertebrae and dental ages by Nolla and Demirjian.

Cirugía virtual guiada para rehabilitación implantosoportada de maxilar edéntulo con carga inmediata / Virtual guided surgery for implantsupported rehabilitation of the edentulous maxilla with immediate loading

Objetivo: Presentar el relato de un caso clínico de cirugía virtual guiada para rehabilitación implantosoportada de maxilar edéntulo con carga inmediata. Relato del caso: Paciente, edéntulo total en ambos maxilares, expresó su deseo de cambiar la prótesis total superior removible por una prótesis total fija sobre implantes. Durante la evaluación clínica, se observaron condiciones biológicas favorables al tratamiento como, adecuada faja de tejido queratinizado y leve reabsorción ósea. Como tratamiento se le sugiere al paciente, una planificación inversa, asistida por cirugía virtual guiada, utilizando un prototipo de guía quirúrgica para la colocación de seis implantes dentales en el maxilar y la instalación de una prótesis protocolo de carga inmediata. Conclusiones: Los resultados nos permiten concluir que la cirugía virtual guiada por computadora para rehabilitación protésica implantosoportada de maxilar edéntulo, con carga inmediata, proporciona precisión en los procedimientos quirúrgicos, es fundamental para la confección de prótesis inmediatas, representa una alternativa mínimamente invasiva y el resultado complace a los pacientes.

Objective: present the report of a clinical case of a virtual guided surgery for implant-supported rehabilitation of the edentulous maxilla with immediate loading. Case report: Patient, bi-maxillary edentulous expressed the desire to replace the removable upper total prothesis for a total fixed prothesis on implants. During the clinical evaluation, favorable biological conditions for treatment were observed, such as adequate keratinized tissue band and mild bone resorption. As part of the treatment, the patient was recommended a reverse planning approach, assisted by virtual guided surgery. This involved a prototype surgical guide for the fixation of six dental implants in the maxilla and the installation of an immediate loading protocol prosthesis. Conclusions: The results lead us to conclude that computer-guided virtual surgery for implant-supported prosthetic rehabilitation of the edentulous maxilla with immediate loading, provides a high precision in surgical procedures. It is essential to fabrication of immediate prostheses, represents a minimally invasive alternative, and results in patient satisfaction.

Influencia de la Morfología Externa de la Raíz de Primeros Premolares Superiores en la Sobreestimación del Espesor Radiográfico Radicular Durante la Preparación para Poste, Evaluados Mediante Tomografía Computarizada Cone Beam / Influence of the External Morphology of the Root of Upper First Premolars on the Overestimation of Radiographic Root Thickness During Post Preparation, Evaluated by Cone Beam Computed Tomography

La investigación tuvo como objetivo determinar la influencia de la morfología externa de la raíz de primeros premolares superiores en la existencia de sobreestimación radiográfica durante la preparación para poste. Con este fin se realizó un estudio transversal in vitro, donde 60 premolares superiores uniradiculares fueron instrumentadas con fresas Gates Glidden y Pesso de calibre 1, 2 y 3. Seguidamente se obtuvieron imágenes radiográficas digitales de cada pieza dentaria mediante un aparato posicionador a una distancia constante en sentido vestíbulo lingual, asimismo se realizaron imágenes tomográficas volumétricas de las muestras. En ambas técnicas imagenológicas se midió el espesor a mesial y distal de las piezas. La sobreestimación fue calculada mediante la diferencia de la medida tomográfica menos la radiográfica. Los resultados indicaron que en ambas paredes radiculares hubo diferencia significativa entre las medidas radiográficas y tomográficas (p<0,05), encontrándose en la pared distal diferencias altamente significativas (p<0,001); además se evidenció que la sobreestimación radiográfica fue mayor en la pared distal. El estudio concluyó que existe sobreestimación radiográfica en premolares superiores durante la preparación para poste de un 20,42 % en promedio, siendo la pared distal la estructura que presenta mayor sobreestimación.

SUMMARY: he investigation´s objective was to determine the influence of external morphology of the root of upper first premolars in the existence of radiographic overestimation during preparation for post. An in vitro cross-sectional study was carried out, where 60 single-rooted upper premolars were instrumented with burs. Gates Glidden and Pesso of caliber 1, 2 and 3, then, digital radiographic images of each dental piece were obtained by means of a positioning device at a constant distance in the buccolingual direction; volumetric tomographic images of the samples were also performed. In both imaging techniques, the mesial and distal thickness of the pieces was measured. The overestimation was calculated by the difference of the tomographic measurement minus the radiographic one. The results indicated that in both root walls there was a significant difference between the radiographic and tomographic measurements (p<0.05), with highly significant differences being found in the distal wall (p<0.001); In addition, it was evidenced that the radiographic overestimation was greater in the distal wall. The study concluded that there is radiographic overestimation in upper premolars during post preparation of 20.42% on average, with the distal wall being the structure that presents the greatest overestimation.

Segundo Conducto Mesiovestibular en Molares Superiores: Prevalencia y Análisis Anatómico Mediante Tomografía Computarizada de Haz Cónico / Second Mesiobuccal Canal in Maxillary Molars: Prevalence and Anatomical Analysis Through Cone Beam Computed Tomography

El objetivo de este estudio fue utilizar la Tomografía Computarizada de Haz Cónico (TCHC) para investigar la configuración anatómica, prevalencia y distribución del conducto mesiovestibular Dos (MV2) en molares superiores de una subpoblación chilena, considerando variables como la presencia del conducto MV2, la clasificación de Vertucci, el género y edad. Estudio observacional de corte transversal. La muestra consistió en Tomografías Computarizadas de Haz Cónico tomadas en la clínica odontológica de la Universidad Andrés Bello (Viña del Mar). Se calculó el tamaño muestral utilizando la fórmula de población conocida, lo que resultó en 262 tomografías. Los examinadores se calibraron utilizando el coeficiente Kappa de Cohen, para luego analizar las variables mediante un estudio imagenológico utilizando el software I-CAT Visión. Se analizaron 439 primeros y segundos molares superiores. La prevalencia del conducto MV2 en primeros molares fue del 63,74 %, mientras que, en segundos molares, fue del 20,04 %. La prevalencia en primeros molares fue mayor en hombres (73,86 %) que en mujeres (58,62 %), mientras que, en segundos molares, fue del 15,81 % en mujeres y del 28,41 % en hombres. En relación con la edad, en los primeros molares la diferencia fue significativa en el rango de 18 a 40 años (66,49 %). En cuanto al tipo de configuración según Vertucci (2005), el 70 % de los primeros molares presentó una configuración Tipo II, y un 23,65 % Tipo IV, con resultados similares en los segundos molares. El presente estudio demostró que los conductos MV2 son frecuentes en la población analizada, especialmente en los primeros molares, y que la configuración Tipo II es la más prevalente. Además, se observó una mayor prevalencia en hombres y en el rango de 18 a 40 años. Estos hallazgos proporcionan información relevante sobre la anatomía radicular en la población y pueden contribuir a mejorar los resultados de tratamiento.

SUMMARY: The aim of this study was to use Cone-beam Computed Tomography (TCHC) to investigate the anatomical configuration, prevalence, and distribution of the Second Mesiobuccal (MB2) canal in upper molars of a Chilean subpopulation, considering variables such as the presence of MB2 canal, Vertucci classification, gender, and age. Cross-sectional observational study. The sample consisted of TCHC scans taken at the dental clinic of Universidad Andrés Bello (Viña del Mar). The sample size was calculated using the formula for known population, resulting in 262 scans. The examiners were calibrated using Cohen's Kappa coefficient, then the variables were analyzed through an imaging study using I-CAT Vision software. 439 first and second upper molars were analyzed. The prevalence of MB2 canal in first molars was 63.74 %, while in second molars, it was 20.04 %. The prevalence in first molars was higher in males (73.86 %) than in females (58.62 %), while in second molars, it was 15.81 % in females and 28.41 % in males. Regarding age, in first molars the difference was significant between the age range of 18 to 40 years (66.49 %). Regarding the type of configuration according to Vertucci, 70 % of the first molars had Type II configuration, and 23.65 % had Type IV, with similar results in second molars. The present study demonstrated that MB2 canals are frequent in the analyzed population, especially in first molars, and Type II configuration is the most prevalent. Additionally, a higher prevalence was observed in males and in the age range of 18 to 40 years. These findings provide relevant information about root anatomy in the studied population and can contribute to improving treatment outcomes.

Analysis of the Internal and External Morphology of the Mandibular First Molar in a Chilean Sub-Population Using Cone-Beam Computed Tomography / Análisis de la Morfología Interna y Externa del Primer Molar Mandibular en una Subpoblación Chilena Mediante Tomografía Computarizada de Haz Cónico

SUMMARY: The mandibular first molar (MFM) commonly presents two roots with two canals in the mesial root and one or two canals in the distal root. However, morphological variations have been described in different populations, which must be considered when planning endodontic treatment. The aim of this study was to analyze the internal and external morphology of the MFM in a Chilean sub-population using cone-beam computed tomography (CBCT) images. An in vivo cross-sectional, descriptive, and observational study was conducted using CBCT exams from 351 right and left MFM. The data were analyzed by descriptive statistics using the Chi- Square test for categorical variables, Fisher's exact test, the Mann-Whitney U non-parametric test for two independent samples, and the Wilcoxon non-parametric test for related samples. Of the total sample, 1 root was observed in 2.27 % of the cases, 2 roots in 93.73 %, and 3 roots in 4 %. In relation to the number of canals, 71.23 % of the MFM showed 3 root canals, 16.81 % 4 canals, 9.69 % 2 canals, and 2.28 % 1 canal. Of all the studied cases, 2.3 % had a C-shaped anatomy. In terms of morphology, using Zhang's classification, variant 3 was observed in 71.23 %, variant 4 in 12.82 %, variant 1 in 9.67 %, variant 6 in 4 %, and variant 8 in 2.28 %. In conclusion, the morphology of the MFM is variable in a Chilean sub-population, and these variations must be considered before and during endodontic therapy. CBCT proved to be an effective tool for the in vivo study of tooth morphology.

El primer molar mandibular (MFM) comúnmente presenta dos raíces con dos canales en la raíz mesial y uno o dos canales en la raíz distal. Sin embargo, se han descrito variaciones morfológicas en distintas poblaciones, las que se deben tener en consideración al momento de planificar el tratamiento endodóntico. El objetivo de este estudio fue analizar la morfología interna y externa del MFM en una sub población chilena mediante el uso de imágenes de tomografía computarizada Cone Beam (CBCT). Se realizó un estudio transversal, descriptivo y observacional in vivo empleando exámenes CBCT de 351 MFM tanto derechos como izquierdos. Los datos se analizaron mediante estadística descriptiva empleando la prueba Chi-Cuadrado para variables categóricas, el test exacto de Fisher, la prueba no paramétrica de U-Mann-Whitney para dos muestras independientes y la prueba no paramétrica de Wilcoxon para muestras relacionadas. Del total de la muestra se observó 1 raíz en un 2.27 % de los casos, 2 raíces en 93.73 % y 3 raíces en un 4 %. En relación al número de canales un 71.23 % de los MFM mostraron 3 canales radiculares, un 16.81 % 4 canales, un 9.69 % 2 canales y un 2.28 % 1 canal. Del total de los casos estudiados un 2.3 % se presentó anatomía en forma de C. En relación a la morfología, empleando la clasificación de Zhang, se observó en un 71.23 % la variante tipo 3, en un 12.82 % la variante tipo 4, en un 9.67 % la variante tipo 1, en un 4 % variante tipo 6 y en un 2,28 % variante tipo 8. En conclusión, la morfología del MFM es variable en una subpoblación chilena y estas variaciones deben ser consideradas antes y durante la terapia endodóntica. El CBCT demostró ser una herramienta eficaz para el estudio in vivo de la morfología dentaria.

CBCT study of root apices distance to mandibular canal in peruvian population

The purpose of this study was to compare the average distances from the root apices of the first molars, second molars, and second premolars to the mandibular canal according to sex in the Peruvian population using cone-beam computed tomography (CBCT). Eighty CBCT scans of Peruvian patients aged from 15-80 years were examined. After locating the mandibular canal, measurements of the vertical distances from the mandibular canal to the apices of the second premolars, as well as the first molars and second molars, were made. For the statistical analysis, Student's t test was used for both paired and unpaired samples, with a significance level of p0.05) between the distances from the apices of the second premolars and the first and second molars to the mandibular canal. However, for the second premolars and second molars on the left side, the values were higher, with averages of 5.52mm and 3.75mm, respectively. The mesial roots of the second molars were closer to the mandibular canal. In addition, women showed shorter distances than men.

El propósito de este estudio fue comparar las distancias promedio desde los ápices radiculares de primeros molares, segundos molares y segundos premolares al canal mandibular según sexo en la población peruana mediante tomografía computarizada de haz cónico (TCHC). Se examinaron 80 tomografías CBCT de pacientes peruanos con edades comprendidas entre los 15 y 80 años. Luego de ubicar el canal mandibular, se realizaron mediciones de las distancias verticales desde el canal mandibular hasta el ápice de los segundos premolares mandibulares, así como de los primeros molares y segundos molares. Para el análisis estadístico se utilizó la prueba t de Student para muestras pareadas y no pareadas con un nivel de significación de p0.05) entre las distancias desde los ápices de los segundos premolares mandibulares y los primeros y segundos molares al canal mandibular. Sin embargo, para los segundos premolares y segundos molares en el lado izquierdo, los valores fueron más altos con un promedio de 5,52mm y 3,75mm, respectivamente. Las raíces mesiales de los segundos molares estaban más cerca del canal mandibular. Además, las mujeres mostraron distancias más cortas que los hombres.

Effect of dental distance from implant and MAR algorithm on the detection of vertical root fracture in CBCT images

Three-dimensional cone-beam computed tomography (CBCT) has an important role in the detection of vertical root fractures (VRFs). The effect of artifact generation by high-density objects like dental implants on image quality was well documented. This study aimed to assess the effect of tooth-implant distance and the application of metal artifact reduction (MAR) algorithm on the detection of VRFs on CBCT scans. This study was conducted on 20 endodontically treated single-rooted teeth. VRFs were induced in 10 teeth, while the other 10 remained intact. The implant was inserted in the right second premolar socket area, and two teeth were inserted in right canine and right first premolar sockets area randomly and underwent CBCT with and without the application of MAR algorithm. SPSS 21 was used to analyze the results (alpha=0.05). According to the findings of this study, all four variables of sensitivity, specificity, accuracy, and positive predictive values in diagnosis were higher in cases without MAR software at both close(roots in first premolar sockets) and far distances (roots in canine sockets) from the implant. However, the highest rate of diagnosis accuracy of the first and second radiologists was in the far distance group from the implant without MAR, and the lowest rate of diagnosis accuracy in the first and second radiologists was in the close distance to the implant. Applying MAR algorithm had no positive effect on detection of VRFs on CBCT scans in both close and distant scenarios.

La tomografía computarizada de haz cónico tridimensional (CBCT) tiene un papel importante en la detección de fracturas radiculares verticales (VRF). El efecto de la generación de artefactos por objetos de alta densidad como los implantes dentales en la calidad de la imagen está bien documentado. Este estudio tuvo como objetivo evaluar el efecto de la distancia entre el diente y el implante y la aplicación del algoritmo de reducción de artefactos metálicos (MAR) en la detección de VRF en escaneos CBCT. Este estudio se realizó en 20 dientes uniradiculares tratados endodónticamente. Se indujeron VRF en 10 dientes, mientras que los otros 10 permanecieron intactos. El implante se insertó en el área del alveolo del segundo premolar derecho, y dos dientes se insertaron en el canino derecho y en el área del alvéolo del primer premolar derecho al azar y se sometieron a CBCT con y sin la aplicación del algoritmo MAR. Se utilizó SPSS 21 para analizar los resultados (alfa=0,05). De acuerdo con los hallazgos de este estudio, las cuatro variables de sensibilidad, especificidad, precisión y valores predictivos positivos en el diagnóstico fueron más altas en los casos sin el software MAR tanto en distancias cercanas (raíces en las cavidades de los primeros premolares) como lejanas (raíces en las cavidades de los caninos) del implante. Sin embargo, la tasa más alta de precisión diagnóstica del primer y segundo radiólogo fue en el grupo de mayor distancia al implante sin MAR, y la tasa más baja de precisión diagnóstica en el primer y segundo radiólogo fue en la distancia cercana al implante. La aplicación del algoritmo MAR no tuvo un efecto positivo en la detección de VRF en escaneos CBCT en escenarios cercanos y distantes.

Tomographic evaluation of mandibular buccal shelf in patients with different vertical growth pattern / Evaluación de la placa ósea mandibular en pacientes con diferente patrón de crecimiento vertical

The purpose of this research was the tomographic evaluation of the Mandibular Buccal Shelf (MBS) in orthodontic patients with different vertical growth pattern. An observational, descriptive, cross-sectional and retrospective study was conducted. Tomographic images of patients aged 14 to 40 years were observed and a database was formed with those that met the inclusion criteria. The sample size was 10 for each group according to vertical growth pattern (hypodivergent, normodivergent and hyperdivergent). Then four zones of frequent insertion of extralveolar mini-screws were selected in the MBS, taking as a reference the mesial and distal roots of the first and second mandibular molar. When comparing the characteristics of MBS between vertical growth patterns, between sexes and hemiarchs, no statistically significant differences were found. However, when the characteristics of MBS were compared according to the reference root, it was found that there were statistically significant differences. The vestibular area to the distal root of the second mandibular molar presented the highest values in terms of angulation, height and thickness. There are no significant differences in the bone characteristics of MBS according to vertical growth patterns, sexes or hemiarchs. Angulation, height and thickness progressively increase from the vestibular bone of the mesial root of the first mandibular molar to the distal root of the second molar.

El propósito de esta investigación fue la evaluación tomográfica de la placa ósea mandibular (POM) en pacientes de ortodoncia con diferente patrón de crecimiento vertical. Se realizó un estudio de tipo observacional, descriptivo, transversal y retrospectivo. Se observó imágenes tomográficas de pacientes de 14 a 40 años de edad y se formó una base de datos con las que cumplían los criterios de selección. El tamaño de muestra fue de 10 para cada grupo según patrón de crecimiento vertical (hipodivergentes, normodivergentes e hiperdivergentes). Luego se seleccionaron cuatro zonas de inserción frecuente de minitornillos extralveolares en la POM, tomando como referencia las raíces mesial y distal del primer y segundo molar mandibular. Al realizar la comparación de las características de la POM entre patrones de crecimiento vertical, entre sexos y hemiarcadas no se encontraron diferencias estadísticamente significativas. Sin embargo, cuando se comparó las características de la POM según la raíz de referencia se encontró que había diferencias estadísticamente significativas. La zona vestibular a la raíz distal de la segunda molar mandibular presento los mayores valores en cuanto angulación, altura y grosor. No existen diferencias significativas en las características óseas de la POM según patrones de crecimiento vertical, sexos o hemiarcadas. La angulación, la altura y el grosor aumenta progresivamente desde el hueso vestibular de la raíz mesial del primer molar mandibular hacia la raíz distal del segundo molar.

Regeneration of a large bony lesion with advanced-platelet rich fibrin: case report / Regeneración de una lesión ósea de gran tamaño con fibrina rica en plaquetas: reporte de caso

Introduction: This case report analyzes the regeneration potential of advanced-platelet rich fibrin (A-PRF) in large bony lesions. Advanced-platelet rich fibrin provides various growth factors which aids in faster healing. Materials and Methods: Patient presented with peri-apical radiolucency. CBCT showed bony radiolucency in teeth 31, 32, 41, 42. A full mouth mucoperiosteal flap was raised and a cyst lining was enucleated. Apicoectomy was done with respect to 31, 32, 41, 42 along with and retrograde with a preparation of APRF clots were placed in the bony cavity. Results: Post-op CBCT at 6 months showed a significant difference in size and bone density of the lesion. Conclusions: Advanced-platelet rich fibrin has shown promising results in reducing the size of bony defect and periapical lesion in this case.

Introducción: Este caso clínico demuestra el potencial de regeneración de la fibrina rica en plaquetas avanzada (A-PRF) en lesiones óseas de gran tamaño. La fibrina rica en plaquetas avanzada proporciona varios factores de crecimiento que ayudan a una curación más rápida. Materiales y Métodos: El paciente se presentó con radiolucencia periapical. Tomografía computarizada de haz cónico mostró radiolucencia ósea en los dientes 31, 32, 41, 42. Se levantó un colgajo mucoperióstico de boca completa y se enucleó el revestimiento del quiste. Se realizó apicectomía con respecto a 31, 32, 41, 42, y se colocó una preparación de APRF se colocaron coágulos en la cavidad ósea. Resultados: La tomografía computarizada de haz cónico postoperatorio a los 6 meses mostró una diferencia significativa en el tamaño y la densidad ósea de la lesión. Conclusión: La fibrina rica en plaquetas avanzada ha mostrado resultados prometedores en la reducción del tamaño del defecto óseo y la lesión periapical en este caso.

Descripción de la morfología del sistema de canales radiculares del primer molar maxilar mediante tomografía computarizada cone-beam en una población chilena / Description of the morphology of the root canal system of the maxillary first molar using cone-beam computed tomography in a Chilean population

Describir la morfología del sistema de canales radiculares del primer molar maxilar en una población chilena mediante exámenes de tomografía computarizada Cone-Beam (CBCT). Se realizó un estudio observacional descriptivo en el cual se utilizaron los exámenes CBCT de pacientes que fueron atendidos en un Centro de Radiología Maxilofacial privado durante el período comprendido entre Enero y Diciembre del año 2018 en la ciudad de Temuco, Chile, los cuales fueron observados de manera independiente por dos investigadores previamente calibrados. Se observaron 199 exámenes CBCT. En la raíz mesiobucal,predominaron las morfologías tipo II, I y IV de Vertucci respectivamente, mientras que en la raíz distobucal y palatina predominó la morfología tipo I. El canal MB2 estuvo presente en el 62,3 % de los casos, con una prevalencia significativamente mayor en pacientes jóvenes. En la mayoría de los primeros molares maxilares de los habitantes de la ciudad de Temuco se observaron tres raíces separadas y la presencia de cuatro canales. Se determinó una alta frecuencia del canal MB2 en la raíz MB.

SUMMARY: The objective of this study was to describe the morphology of the root canal system of the maxillary first molar in a Chilean population through Cone-Beam computed tomography (CBCT) examinations. A descriptive observational study was carried out in which the CBCT examinations of patients who were treated in a private maxillofacial radiology center during the period between January and December 2018 in Temuco, Chile, were used which were observed independently by two previously calibrated researchers. In this analysis 199 CBCT exams were observed. In the mesiobuccal root, Type II, I and IV morphologies predominated respectively, while in the distobuccal and palatal root, Type I morphology predominated. The MB2 canal was present in 62.3 % of cases, with a higher prevalence in young patients. Three separate roots and the presence of four canals were observed in most of the maxillary first molars of the patients in Temuco. A high frequency of the MB2 canal was determined in the root MB.

Concordance of the vestibular bone thickness at the level of point a between teleradiography and cone beam computed tomography / Concordancia del espesor óseo vestibular a nivel del punto a entre telerradiografía y tomografía computarizada de haz cónico

Objective: The aim of this study was to determine the concordance of the vestibular bone thickness measured at the level of point A between Teleradiography and Cone Beam Computed Tomography (CBCT). Materials and Methods: This study consisted of a cross-sectional analytical design of concordance that evaluated the teleradiographies and CBCTs of 32 patients. The measurements were performed by three evaluators, specialists in orthodontics. Two of them measured the CBCTs and one evaluated the teleradiographs. The concordance of both tests was determined using the Concordance Correlation Coefficient. Results: When evaluating the value of the vestibular bone thickness at the level of point A between the CBCT and the teleradiography, it was observed that the mean value of the absolute difference between the two was 0.95±0.74, 95%CI [0.68­1.22], being statistically significant (p=0.0027). When the concordance between both tests was analyzed, it was observed that it was poor (CCC=0.204 95%CI [0.014­0.394]), although statistically significant (p<0.00001). Conclusions: It was possible to conclude that there is no concordance in the measurement of the vestibular bone thickness at the level of Point A between the Teleradiography and the CBCT.

Objetivo: El objetivo de este estudio fue determinar la concordancia del espesor óseo vestibular medido a nivel del punto A entre la Telerradiografía y la Tomografía computarizada de haz cónico (CBCT). Materiales y Métodos: Esta investigación presentó un diseño analítico transversal de concordancia en el que se evaluaron las telerradiografías y CBCT de 32 pacientes. Las mediciones fueron realizadas por tres evaluadores especialistas en ortodoncia, dos de ellos midieron los CBCT y uno las telerradiografías. La concordancia de ambos exámenes fue medida mediante Coeficiente de Correlación de Concordancia. Resultados: Al evaluar el valor del grosor óseo vestibular a nivel del punto A entre el CBCT y la telerradiografía, se observó que el valor promedio de diferencia absoluta entre ambos fue de 0,95±0,74 IC95% [0,68­1,22], siendo estadísticamente significativas (p=0,0027). Cuando se analizó la concordancia entre ambos exámenes se observó que esta fue pobre (CCC=0,204 IC95 % [0,014­0,394]), aunque estadísticamente significativa (p<0,00001). Conclusión: Se pudo concluir que no existe concordancia en la medición del espesor óseo vestibular medido a nivel del Punto A entre la Telerradiografía y el CBCT.

Crown-Root Angle Measurement in Permanent Central Incisors

The anatomical variations of teeth are directly related to the esthetics achieved in orthodontic treatment. These variations include the dental axes, such as the long crown axis and the long root axis. For this reason, these axes and the angle formed by their intersection, or crown-root angle, have been studied using several methodologies, mainly in central incisors. This study aimed to propose the visual- spatial processing as a method to determine the long crown axis and the long root axis, and thus measure the angle between these axes (crown-root angle) in the permanent upper and lower central incisors. The study had a quantitative, descriptive, observational and cross- sectional approach. The study sample consisted of 100 Cone-beam computed tomography (CBCT) images: 50 of permanent upper central incisors and 50 of permanent lower central incisors. The crown-root angle was measured considering the long crown axis and the long root axis. The mean crown root angle in the upper central incisors was 21.34 °, with a standard deviation (SD) of 4.41º; for the lower central incisors, the mean value was 20.05º with a SD of 4.18º. This study suggests that the visual-spatial processing can be a valid method to determine the long crown axis and the long root axis, also with the advantage of not requiring specific instruments and anatomical reference points, which simplifies the tracing of axes and thus measurement of the crown-root angle.

Las variaciones anatómicas de los dientes tienen directa relación con la estética lograda en el tratamiento de ortodoncia. Dentro de estas variaciones se encuentran los ejes dentarios, como el eje mayor de la corona y el eje mayor radicular. Por esta razón, se ha estudiado mediante diversas metodologías estos ejes y el ángulo formado por dicha intersección o ángulo corono radicular, principalmente en los incisivos centrales. El objetivo del presente estudio es plantear la percepción viso espacial como método para determinar el eje mayor de la corona y el eje mayor radicular, y así medir el ángulo entre estos ejes (ángulo corono radicular) en los incisivos centrales superiores e inferiores definitivos. La investigación es de enfoque cuan- titativo, descriptivo, observacional y transversal. La muestra del estudio fueron 100 imágenes de CBCT: 50 de incisivos centrales superiores definitivos y 50 de incisivos centrales inferiores definitivos. Se midió el ángulo corono radicular considerando el eje mayor de la corona y el eje mayor radicular. El promedio del ángulo corono radicular en los incisivos centrales superiores fue de 21.34° con desviación estándar (DS) de 4. 41º y para los incisivos centrales inferiores se obtuvo como valor promedio 20.05º con DS de 4.18º. Este estudio plantea que la percepción viso espacial puede ser válido como método para determinar el eje mayor de la corona y el eje mayor radicular, teniendo además la ventaja de prescindir de instrumentos específicos y de puntos anatómicos de referencia, lo cual simplifica el trazado de los ejes y por ende la medición del ángulo corono radicular.

Endodontia guiada: tecnologia aplicada na resolução de tratamentos de canais calcificados / Guided endodontics: technology applied in the resolution of treatments of calcified canals / Endodoncia guiada: tecnología aplicada en la resolución de tratamientos de conductos calcificados

As calcificações pulpares provocam alterações morfológicas no interior dos canais radiculares que dificultam o tratamento endodôntico. Para solucionar essa dificuldade, a ferramenta Endoguide ou Endodontia Guiada foi desenvolvida para a resolução de casos complexos. Esta pesquisa objetivou descrever as aplicações da ferramenta Endoguide no tratamento de canais calcificados na endodontia. Todas as buscas foram realizadas por um único pesquisador na base de dados PubMed/MEDLINE e busca manual utilizando os descritores "Endodontics", "Digital", "Cone beam", "Guided". Foram considerados elegíveis os artigos publicados entre 2010 e 2022 e excluídos os estudos cuja publicação não foi obtida na íntegra e ainda aqueles em que os resultados não apresentaram embasamento teórico e prático suficientes para que pudessem ser incluídos no trabalho. Após as buscas, foram encontrados 47 artigos, selecionados inicialmente pelo título e resumos, excluindo as duplicatas. Ao final, a leitura completa e coleta de dados foi realizada em 6 artigos. As informações relevantes dos artigos selecionados foram transcritas em forma de quadro para sumarizar os achados. A endodontia guiada pode ser uma excelente alternativa para tratamentos de casos complexos, necessitando um investimento financeiro mínimo no consultório, pois os equipamentos de captura de imagem, planejamento virtual e de guias podem ser realizados em laboratórios capacitados. Assim, concluímos que o emprego da Endoguide como ferramenta no tratamento de canais calcificados se mostrou bem-sucedido e sua utilização não requer um conhecimento amplo, podendo ser usada por profissionais menos experientes.

Pulp calcifications cause morphological changes inside the root canals that make endodontic treatment difficult. To solve this difficulty, the tool Endoguide or Guided Endodontics was developed to solve complex cases. This research aimed to describe the applications of the Endoguide tool in the treatment of calcified root canals in endodontics. All searches were performed by a single researcher in the PubMed/MEDLINE database and manual search using the descriptors "Endodontics", "Digital", "Cone beam", "Guided". Articles published between 2010 and 2022 were considered eligible, and studies whose publication was not obtained in full text were excluded, as well as those in which the results did not have sufficient theoretical and practical basis for them to be included in the study. After the searches, 47 articles were found, initially selected by title and abstract, excluding duplicates. In the end, the complete reading and data collection was performed with 6 articles. Relevant information from the selected articles was transcribed for a table to summarize the findings. Guided endodontics can be an excellent alternative for treating complex cases, requiring minimal financial investment in the office, as image capture equipment, virtual planning and guides can be performed in trained laboratories. Thus, we conclude that the use of Endoguide as a tool in the treatment of calcified canals proved to be successful and its use does not require extensive knowledge and can be used by less experienced professionals.

Las calcificaciones pulpares provocan cambios morfológicos en el interior de los conductos radiculares que dificultan el tratamiento endodóntico. Para solventar esta dificultad se desarrolló la herramienta Endoguide o Endodoncia Guiada para resolver casos complejos. El objetivo de esta investigación fue describir las aplicaciones de la herramienta Endoguide en el tratamiento de conductos radiculares calcificados en endodoncia. Todas las búsquedas fueron realizadas por un único investigador en la base de datos PubMed/MEDLINE y búsqueda manual utilizando los descriptores "Endodontics", "Digital", "Cone beam", "Guided". Se consideraron elegibles los artículos publicados entre 2010 y 2022, y se excluyeron los estudios cuya publicación no se obtuvo a texto completo, así como aquellos en los que los resultados no tenían suficiente base teórica y práctica para ser incluidos en el estudio. Tras las búsquedas, se encontraron 47 artículos, seleccionados inicialmente por título y resumen, excluyendo los duplicados. Al final, se realizó la lectura completa y la recogida de datos con 6 artículos. La información relevante de los artículos seleccionados se transcribió para elaborar una tabla que resumiera los hallazgos. La endodoncia guiada puede ser una excelente alternativa para el tratamiento de casos complejos, requiriendo una mínima inversión financiera en el consultorio, ya que los equipos de captura de imágenes, la planificación virtual y las guías pueden realizarse en laboratorios capacitados. Así, concluimos que el uso de la Endoguía como herramienta en el tratamiento de conductos calcificados demostró ser exitoso y su uso no requiere de grandes conocimientos y puede ser utilizado por profesionales menos experimentados.

Surgical Management of Extruded Fractured Instrument Beyond the Periapical Area: A Case Report with Two-year Follow-up

@#A fractured instrument is an undesirable endodontic mishap that can prevent complete root canal disinfection, thereby affecting the root canal treatment outcome. The present case discussed the surgical management of an extruded fractured barbed broach at the apical third of maxillary right first premolar. A 28-year-old female presented with an endodontic failure on tooth 14 and was diagnosed as previously root canal treated with symptomatic apical periodontitis. Radiographic examination revealed a straightline radiopacity structure that was 2 mm in length extruded from the apical root-end, suggesting a fractured instrument. The case was successfully managed through endodontic microsurgery. The present case emphasises the significance of cone-beam computed tomography as a valuable tool for diagnosis and investigation, while also offering supplementary information for the planning of surgical treatment.