Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
1.
Rev. cuba. estomatol ; 56(3): e2120, jul.-set. 2019. graf
Artículo en Inglés | LILACS | ID: biblio-1093243

RESUMEN

ABSTRACT Introduction: In implant therapy, adequate alveolar bone volume and favorable alveolar ridge architecture are important considerations to obtain positive functional and esthetic rehabilitation. Objective: Describe prosthodontic treatment in an extraction socket with advanced palatal bone resorption secondary to a root fracture through the use of an implant-supported single fixed prosthesis. Principal case data: 39-year-old male patient, without systemic disease, and completely dentate with no occlusal parafunction. Radiographic examination showed the presence of advanced palatal bone resorption, almost total loss of the palatal plate in all its extension secondary to a root fracture of the maxillary left lateral incisor and a large osteolytic area on the palatal aspect of the root. The procedure consisted in extraction of the maxillary left lateral incisor and eventual regeneration of the palatal plate using a resorbable collagen membrane, which was adapted to the bone defect. Then, particulate cortical bone allograft was compacted into the site. Four months after grafting the extraction site, an implant was placed. Six months after implant placement osseointegration was confirmed, and after several stages restoration with a zirconium dioxide abutment and a full ceramic crown was obtained and followed up for 2 years. Conclusions: Regeneration of the palatal plate was possible through the use of particulate cortical bone allograft and a resorbable collagen membrane adapted to the bone defect and placed in position to recreate the palatal plate. This allowed installation of an implant 4 months after the procedure. This technique allowed esthetic and functional results using a single fixed prosthesis(AU)


RESUMEN Introducción: Para la terapia con implantes, un volumen adecuado de hueso alveolar y una arquitectura favorable de la cresta alveolar son consideraciones importantes para obtener una rehabilitación funcional y estética positiva. Objetivo: Describir el tratamiento protésico en una cavidad de extracción con reabsorción ósea palatina avanzada secundaria a una fractura de la raíz, mediante el uso de una prótesis fija única con soporte de implante. Datos principales del caso: Paciente masculino de 39 años, sin enfermedad sistémica, completamente dentado sin parafunción oclusal. El examen radiográfico mostró la presencia de una reabsorción ósea palatina avanzada, una pérdida casi total de la placa palatina en toda su extensión secundaria a una fractura de la raíz del incisivo lateral superior izquierdo y una gran área osteolítica en el aspecto palatino de la raíz. El procedimiento consistió en la extracción del incisivo lateral superior izquierdo y la regeneración posterior de la placa palatina mediante una membrana de colágeno reabsorbible, que se adaptó al defecto óseo. Luego, el aloinjerto de hueso cortical particulado se compactó en el sitio. Cuatro meses después de injertar el sitio de extracción, se colocó un implante. Seis meses después de la colocación del implante, se confirmó la osteointegración y, después de varias etapas, se obtuvo una restauración con un pilar de dióxido de circonio y una corona de cerámica completa, la que fue seguida durante dos años. Conclusiones: La regeneración de la placa palatina fue posible mediante el uso de aloinjerto de hueso cortical particulado y una membrana de colágeno reabsorbible adaptada al defecto óseo y colocada en una posición para recrear la placa palatina. Esto permitió la instalación de un implante 4 meses después del procedimiento. Con esta técnica se obtuvieron resultados funcionales y estéticos utilizando una única prótesis fija(AU)


Asunto(s)
Humanos , Masculino , Adulto , Implantes Dentales/efectos adversos , Oseointegración/fisiología , Alveolo Dental/trasplante , Estética Dental
2.
Rev. odontol. mex ; 21(3): 180-184, jul.-sep. 2017. tab, graf
Artículo en Español | LILACS | ID: biblio-902735

RESUMEN

RESUMEN: Objetivo: El objetivo de este estudio fue evaluar la prevalencia de neumatización del seno maxilar y la relación con la pérdida de piezas adyacentes, en la población peruana geriátrica de un centro reconocido por la atención médica integral a los pacientes adultos mayores. Material y métodos: Se recogieron como muestras 60 radiografías panorámicas del Servicio de Odontología de la Clínica Geriátrica Militar de Chorrillos. El conteo de milímetros de la neumatización del seno maxilar fue mediante una plantilla milimetrada estandarizada. Resultados: De las 60 radiografías se obtuvieron 51 para el estudio. La neumatización fue grado 4 de neumatización (50%) en la pared mesial, grado 4 de neumatización (57.1%) en la pared medial y grado 3 de neumatización en la pared distal (64.7%). Conclusiones: A través de los resultados de este estudio se pudo concluir que la pérdida de piezas dentarias afecta a la neumatización del seno maxilar. Según los resultados de este estudio se encontró el mayor grado de neumatización del seno maxilar cuando había por lo menos dos piezas dentarias adyacentes al lado edéntulo.


ABSTRACT: Objective: The aim of the present study was to assess prevalence of maxillary sinus pneumatization and its relationship to loss of adjacent teeth, in a geriatric Peruvian population treated at a geriatric center recognized for the comprehensive medical care it provides to elderly patients. Material and methods: A sample of 60 panoramic X-rays were gathered from the dental service of the Military Geriatric Clinic at Chorrillos. Millimeter count of maxillary sinus pneumatization was conducted with a standardized millimeter template. Results: From a total of 60 X-rays, 51 were selected for the study. Grade 4 pneumatization was observed (50%) in the mesial wall, grade 4 pneumatization was observed in the medial wall (57.1%) and grade 3 pneumatization was observed in the distal wall (64.7%). Conclusions: Based on results of the present study it could be concluded that there was higher maxillary sinus pneumatization degree when there were at least two teeth adjacent to the edentulous side.

3.
Belo Horizonte; s.n; 2016. 69 p. ilus.
Tesis en Inglés, Portugués | LILACS, BBO | ID: biblio-916317

RESUMEN

O ácido hialurônico (AH), nas últimas décadas, tem sido amplamente estudado como um potente biomaterial na engenharia de tecidos, devido a sua biocompatibilidade, biodegradabilidade e participação em diversos processos biológicos relacionados à morfogênese e regeneração tecidual. O objetivo do presente estudo foi avaliar os efeitos do AH no reparo ósseo de alvéolos dentais humanos. Trinta e dois primeiros pré-molares inferiores foram extraídos de 16 pacientes com média de 18,67 (DP = 7,95) anos de idade com indicação de exodontia bilateral. Imediatamente após as exodontias, um dos alvéolos foi preenchido aleatoriamente com gel contendo AH a 1%, enquanto o contralateral foi preenchido naturalmente com coágulo. Durante os intervalos pós-operatórios de 30 e 90 dias, os pacientes realizaram exames de tomografia computadorizada cone beam (TCCB). Foram capturadas imagens dos cinco cortes ortorradiais mais centrais de cada alvéolo. A intensidade de cinza foi mensurada para cada imagem e os resultados foram expressos como porcentagem média de formação de osso. A espessura vestíbulo-lingual do processo alveolar foi mensurada e comparada entre os intervalos pós-operatórios para avaliar possíveis alterações dimensionais do alvéolo. Também foi avaliado o padrão do trabeculado ósseo alveolar através da dimensão fractal. A análise estatística envolveu análise descritiva e Testes T pareado e Wilcoxon (p<0,05). Os alvéolos tratados apresentaram maior porcentagem de formação óssea e valores de dimensão fractal (58,17% e 1,098, respectivamente) em comparação com os controles (48,97% e 1,074, respectivamente) no período de 30 dias pós-operatório (p<0,05). Com relação ao período de 90 dias, não foi observada diferença significativa entre os grupos. Além disso, não foram observadas diferenças estatisticamente significativas nas dimensões dos alvéolos entre os grupos (p>0,05). Assim, estes dados indicam que o AH acelerou o reparo ósseo em alvéolos dentais humanos


Hyaluronic Acid (HA), in the last decades, has become widely studied as a powerful biomaterial for tissue engineering, since its biocompatibility, biodegradability, and participation in several biological processes related to morphogenesis and tissue healing. The aim of this study was to evaluate the effects of HA on bone repair in human dental sockets. Thirty-two premolars were extracted from 16 patients with a mean age of 18.67 (SD = 7.95) years old with indication of bilateral extraction of lower first premolars. Immediately after the extractions, one socket was randomly filled with 1% HA gel, while the other side was naturally filled with blood clot. During the postoperative intervals of 30 and 90 days, the patients underwent cone beam computed tomography (CBCT). Five central parasagittal scan images were captured from each socket. The gray intensity was measured in each image and the results were expressed as mean percentage of bone formation. The buccolingual alveolar ridge width was also measured and dimensional changes were compared between the postoperative intervals. The pattern of the alveolar trabecular bone was evaluated through the fractal dimension. Statistical analyses included descriptive analysis and Wilcoxon and paired-t tests (p<0.05). The treated sockets showed a higher percentage of bone formation and fractal dimension values (58.17% and 1.098, respectively) compared with controls (48.97% and 1.074, respectively) in the 30-day postoperative period (p<0.05). After 90 days, there were no significant differences between the groups. Additionally, no significant differences were found between the groups regarding the alveolar dimensions (p>0.05). Thus, these data indicate that HA accelerate the bone repair in human dental socket


Asunto(s)
Humanos , Masculino , Femenino , Materiales Biocompatibles/uso terapéutico , Regeneración Tisular Dirigida/estadística & datos numéricos , Ácido Hialurónico/uso terapéutico , Alveolo Dental/anomalías , Tomografía Computarizada de Haz Cónico/estadística & datos numéricos , Tomografía Computarizada por Rayos X/estadística & datos numéricos
4.
Braz. dent. j ; 26(2): 175-180, Mar-Apr/2015. graf
Artículo en Inglés | LILACS | ID: lil-741214

RESUMEN

Studies have suggested that caffeine acts on bone promoting an increase of calcium excretion, inhibition of osteoblast proliferation and delay in tissue repair process, raising the risk of fractures, osteoporosis, periodontal disease and affecting the success of bone reconstructive procedures. The aim of this study was to analyze histomorphometrically the process of alveolar bone healing after tooth extraction in rats subjected to daily intake of boiled coffee or intraperitoneal administration of caffeine. Forty-five male rats were divided according to the treatment in Control group (C); Coffee group (CO) - treated with coffee since birth; and Caffeine (CAF) - intraperitoneal injection of aqueous solution of caffeine 1.5% (0.2 mL/100g body weight) for 30 days. When weighing between 250-300 g they were anesthetized, subjected to extraction of the maxillary right incisor, and euthanized 7, 21 and 42 days after surgery for histological assessments of bone volume and the quality of formed bone in the dental socket. The qualitative results demonstrated larger amounts of blood clot and immature bone in animals under treatment of pure caffeine compared to coffee and control. Histometric analysis revealed that coffee treatment led to a 40% drop in bone formation, and caffeine a 60% drop in comparison to control animals (ANOVA p≤0.01). It was concluded that both the daily ingestion of coffee and the intraperitoneal administration of caffeine in rats delayed the alveolar bone reparative process after tooth extraction, and this effect was more aggressive when pure caffeine was used.


Estudos têm sugerido que a cafeína age sobre o osso promovendo um aumento da excreção de cálcio, inibição da proliferação dos osteoblastos e retardo no processo de reparação tecidual, aumentando o risco de fraturas, osteoporose, doença periodontal, bem como afetando o sucesso de procedimentos de reconstrução óssea. O objetivo deste estudo foi analisar histomorfometricamente o processo de reparação óssea alveolar após extração dentária em ratos submetidos à ingestão diária de café fervido ou a administração intraperitoneal de cafeína. 45 ratos machos foram divididos de acordo com o tratamento, em controle (C); café (CO), tratados com café desde o nascimento; e cafeína (CAF), injeção intraperitoneal de solução aquosa de cafeína de 1,5 % (0,2 mL/100 g de peso corporal) durante 30 dias. Quando pesavam entre 250-300 g os animais foram anestesiados, submetidos à extração do incisivo superior direito, e sacrificados em 7, 21 e 42 dias após a cirurgia para análises histológicas quanto ao volume e à qualidade do osso formado no alvéolo dental. Os resultados qualitativos demonstraram grandes quantidades de coágulo sanguíneo e osso imaturo nos animais tratados com cafeína pura, em relação aos grupos café e controle. A avaliação histométrica mostrou que o tratamento com o café levou a uma queda na formação óssea de 40%, e com a cafeína de 60% em comparação ao grupo controle (ANOVA p≤0,01). Concluiu-se que tanto a ingestão diária de café quanto a administração intraperitoneal de cafeína em ratos retardou o processo de reparação do osso alveolar após extração dentária, e este efeito é mais agressivo quando do uso da cafeína pura.


Asunto(s)
Animales , Ratas , Proceso Alveolar/efectos de los fármacos , Cafeína/farmacología , Café/química , Osteogénesis/efectos de los fármacos , Cicatrización de Heridas/efectos de los fármacos , Cafeína/administración & dosificación , Inyecciones Intraperitoneales , Ratas Wistar , Extracción Dental , Alveolo Dental/efectos de los fármacos
5.
Araçatuba; s.n; 2013. 163 p. ilus, tab.
Tesis en Portugués | LILACS, BBO | ID: lil-727497

RESUMEN

Objetivo: A proposta deste estudo foi avaliar a regeneração óssea de defeitos criados cirurgicamente e naturais circunferenciais (gap) de implantes pósexodônticos. Materiais e método: Para este estudo foram utilizados 8 cães da raça labrador, nos quais foram instalados implantes imediatos (pós-exodônticos) nos alvéolos dos dentes P2 (2o pré-molar) e M1 (1o molar) inferiores bilaterais. Nos implantes da região dos 2º pré-molares bilaterais foram criados cirurgicamente defeitos peri-implantares vestibulares que foram preenchidos de um lado por osso autógeno – OA e do outro por osso bovino inorgânico Bio-Oss®- OB. Nos alvéolos correspondentes aos primeiros molares (M1) os implantes foram instalados e os gaps (defeitos naturais) existente entre a tábua óssea vestibular e o implante, foram preenchidos por Bone Ceramic® - (grupo BC) ou somente coágulo (grupo COA). Todos os sítios cirúrgicos foram posteriormente recobertos por membrana de colágeno reabsorvível (Biogide ®) e mantidos com cicatrizador. Após 4 meses de pós-operatório, os animais foram eutanasiados e os blocos ósseos processados laboratorialmente para análise histomorfométrica. Resultados: Os resultados obtidos nos implantes instalados na região do P2 mostraram que os valores do IS-C foram ligeiramente maior (2.3±0.8mm) no grupo OA, comparado ao grupo OB (1.7± 0.7 mm), enquanto o IS-B dos grupos OA e OB foram respectivamente de 2.7±0.7mm e 2.2±1.0 mm no lado vestibular e de 1.6±0.8mm e 0.8±0.5mm no lado lingual. As médias dos valores de PM-C, PM-B e PM-IS no grupo OA e OB foram respectivamente de 4.3±0.9mm, 4.7±0.9mm, 2.0±1.6mm e 4.3±0.6mm, 4.8±0.6mm, 2.5±0.8mm. A diferença estatística significativa foi observada somente na espessura da crista óssea vestibular de 2 a 5 mm em direção ao IS (“pescoço do implante”), incluindo o biomaterial (S-OCbt) que se apresentou maior no grupo OB. Nos implantes instalados na região do M1, o gap vestibular horizontal foi de 1.1 (COA) e 1.4 mm (BC) e vertical de 3 e...


Objective: The purpose of these studies were to evaluate bone regeneration at natural or surgically-created buccal defects at implants placed immediately into extraction sockets (IPIES). Material and methods: Eight Labrador dogswere used and implants were placed immediately into the extraction sockets of P2 (second premolar) and M1 (first molar), bilaterally. At P2, the buccal wall of the extraction sockets was removed bilaterally to create a standardized defect, 4 mm wide coronally, 2 mm wide apically, and 6 mm height. At P2 sites, Bio-Oss at the test (OB) or autogenous bone at the control (OA) sites were used to fill the defects. At M1 sites, Bone Ceramic ® at the test (BC) or the clot alone (COA) were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membraneand a non-submerged healing was allowed. After 4 months the animals were euthanized, bone blocks harvested and processed for histomorphometric analysis. Results: at P2 sites, IS- C values were slightly higher (2.3±0.8mm) in the OA compared to the OB (1.7±0.7 mm). IS- B were 2.7 ± 0.7mm and 2.2 ± 1.0mm on the buccal side and 1.6 ± 0.8mm and 0.8 ± 0.5mm on the lingual side at OA and OB groups, respectively. The average values of PM- C , B - PM and PM -IS in OA and OB groups were 4.3 ± 0.9mm , 4.7 ± 0.9mm , 2.0 ± 1.6mm and 4.3 ± 0.6mm , 4.8 ± 0.6mm , 2.5 ± 0.8mm, respectively. A statistically significant difference was only observed in the thickness of the buccal bony crest at 2-5 mm apically to IS (the implant neck) when the biomaterial (S -OCbt) was included in the measurement, which appeared to be higher in the OB group. At M1 sites, at the time of installation, the horizontal buccal gap was 1.1 at the COA and 1.4 mm at the BC sites while the vertical remaining defect was 3 mm and 4 mm deep in the control and test sites, respectively. At the buccal aspect, IS-C was higher in the COA (0.6 ± 1.6mm) compared to the BC (0.1 ± 1.8mm) groups and IS- B was...


Asunto(s)
Animales , Perros , Regeneración Ósea , Sustitutos de Huesos , Implantación Dental Endoósea , Carga Inmediata del Implante Dental , Oseointegración , Alveolo Dental
6.
Araçatuba; s.n; 2013. 163 p. ilus, tab.
Tesis en Portugués | LILACS, BBO | ID: biblio-866999

RESUMEN

Objetivo: A proposta deste estudo foi avaliar a regeneração óssea de defeitos criados cirurgicamente e naturais circunferenciais (gap) de implantes pósexodônticos. Materiais e método: Para este estudo foram utilizados 8 cães da raça labrador, nos quais foram instalados implantes imediatos (pós-exodônticos) nos alvéolos dos dentes P2 (2o pré-molar) e M1 (1o molar) inferiores bilaterais. Nos implantes da região dos 2º pré-molares bilaterais foram criados cirurgicamente defeitos peri-implantares vestibulares que foram preenchidos de um lado por osso autógeno – OA e do outro por osso bovino inorgânico Bio-Oss®- OB. Nos alvéolos correspondentes aos primeiros molares (M1) os implantes foram instalados e os gaps (defeitos naturais) existente entre a tábua óssea vestibular e o implante, foram preenchidos por Bone Ceramic® - (grupo BC) ou somente coágulo (grupo COA). Todos os sítios cirúrgicos foram posteriormente recobertos por membrana de colágeno reabsorvível (Biogide ®) e mantidos com cicatrizador. Após 4 meses de pós-operatório, os animais foram eutanasiados e os blocos ósseos processados laboratorialmente para análise histomorfométrica. Resultados: Os resultados obtidos nos implantes instalados na região do P2 mostraram que os valores do IS-C foram ligeiramente maior (2.3±0.8mm) no grupo OA, comparado ao grupo OB (1.7± 0.7 mm), enquanto o IS-B dos grupos OA e OB foram respectivamente de 2.7±0.7mm e 2.2±1.0 mm no lado vestibular e de 1.6±0.8mm e 0.8±0.5mm no lado lingual. As médias dos valores de PM-C, PM-B e PM-IS no grupo OA e OB foram respectivamente de 4.3±0.9mm, 4.7±0.9mm, 2.0±1.6mm e 4.3±0.6mm, 4.8±0.6mm, 2.5±0.8mm. A diferença estatística significativa foi observada somente na espessura da crista óssea vestibular de 2 a 5 mm em direção ao IS (“pescoço do implante”), incluindo o biomaterial (S-OCbt) que se apresentou maior no grupo OB. Nos implantes instalados na região do M1, o gap vestibular horizontal foi de 1.1 (COA) e 1.4 mm (BC) e vertical de 3 e...


Objective: The purpose of these studies were to evaluate bone regeneration at natural or surgically-created buccal defects at implants placed immediately into extraction sockets (IPIES). Material and methods: Eight Labrador dogswere used and implants were placed immediately into the extraction sockets of P2 (second premolar) and M1 (first molar), bilaterally. At P2, the buccal wall of the extraction sockets was removed bilaterally to create a standardized defect, 4 mm wide coronally, 2 mm wide apically, and 6 mm height. At P2 sites, Bio-Oss at the test (OB) or autogenous bone at the control (OA) sites were used to fill the defects. At M1 sites, Bone Ceramic ® at the test (BC) or the clot alone (COA) were used to fill the defects. All surgical sites were subsequently covered by a resorbable collagen membraneand a non-submerged healing was allowed. After 4 months the animals were euthanized, bone blocks harvested and processed for histomorphometric analysis. Results: at P2 sites, IS- C values were slightly higher (2.3±0.8mm) in the OA compared to the OB (1.7±0.7 mm). IS- B were 2.7 ± 0.7mm and 2.2 ± 1.0mm on the buccal side and 1.6 ± 0.8mm and 0.8 ± 0.5mm on the lingual side at OA and OB groups, respectively. The average values of PM- C , B - PM and PM -IS in OA and OB groups were 4.3 ± 0.9mm , 4.7 ± 0.9mm , 2.0 ± 1.6mm and 4.3 ± 0.6mm , 4.8 ± 0.6mm , 2.5 ± 0.8mm, respectively. A statistically significant difference was only observed in the thickness of the buccal bony crest at 2-5 mm apically to IS (the implant neck) when the biomaterial (S -OCbt) was included in the measurement, which appeared to be higher in the OB group. At M1 sites, at the time of installation, the horizontal buccal gap was 1.1 at the COA and 1.4 mm at the BC sites while the vertical remaining defect was 3 mm and 4 mm deep in the control and test sites, respectively. At the buccal aspect, IS-C was higher in the COA (0.6 ± 1.6mm) compared to the BC (0.1 ± 1.8mm) groups and IS- B was...


Asunto(s)
Animales , Perros , Regeneración Ósea , Sustitutos de Huesos , Implantación Dental Endoósea , Carga Inmediata del Implante Dental , Oseointegración , Alveolo Dental
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA