RESUMEN
Objective@#To compare the disinfection effects of 500 mg/L chlorine-containing disinfectant and 3% hydrogen peroxide disinfectant applied to the threaded plastic hose at the fixed end of the saliva suction pipe of the oral comprehensive treatment table after diagnosis and treatment of patients in stomatology to provide a basis for clinical cleaning and disinfection.@* Methods @#The fixed ends of saliva suction pipes of 12 comprehensive treatment tables in the dental pulp department and maxillofacial surgery were selected as the research objects. The absorption was randomly divided into two groups and a control group: experimental group 1 with 500 mg/L chlorine disinfectants and experiment 2 group with 3% hydrogen peroxide disinfectant rinse disinfection and the control group with 0.9% sterile saline flushing pipe once a week for four weeks. Before and after washing and disinfection, samples from the inner wall of the threaded plastic hose interface were collected for bacterial culture and colony count, and colony counts within and between groups were compared before and after disinfection. Statistical analysis was conducted using SPSS 24.0 software.@*Results@#The baseline number of bacterial colonies in the first three groups was balanced, with no statistically significant difference (χ2 = 0.538, P = 0.764). The number of bacterial colonies after washing and disinfection was lower than that before washing and disinfection. The difference between 500 mg/L chlorine-containing disinfectant and 3% hydrogen peroxide disinfectant before and after disinfection was highly significant (Z = -4.801, P<0.001; Z = -4.429, P<0.001). There was no significant difference between the disinfection effect of 500 mg/L chlorine-containing disinfectant and 3% hydrogen peroxide disinfectant, but they were both better than the control group (χ2 = 18.070, P<0.001).@*Conclusion@#Disinfecting the saliva suction pipe with disinfectant between diagnosis and treatment can effectively reduce the bacterial contamination at the fixed end threaded plastic hose interface of the saliva suction pipe. The disinfection method is simple and convenient, and it is worth applying in the oral clinic.
RESUMEN
CT is an important imaging tool for the diagnosis of novel coronavirus pneumonia (COVID-19), therefore, it′s necessary to strictly control the disinfection of CT workplace and equipment and biosafety to avoid the place from becoming a potential infection source and to reduce the risk of infection of patients and radiological staff. It is also necessary to reduce the CT scan dose to minimize the radiation hazards on patients under the premise of ensuring the CT image quality and diagnostic efficiency. Based on the survey that novel coronavirus residues after disinfection at some CT workplace in domestic and overseas and the application of low-dose CT scan in diagnosis of COVID-19, as well as the current situation of radiological protection management in emergency hospital, this paper summarizes and proposes suggestions on infection control and radiological protection for CT workplace to strengthen the defense line of COVID-19 prevention and control.
RESUMEN
【Objective】 To observe the inactivation effect of a new low-temperature plasma air disinfector on microorganisms in the natural environment and artificial contaminated environment so as to further determine the minimum effective processing parameters. 【Methods】 First， in 0.5 m3 of super clean workbench and 1.05 m3 airtight organic glass cavity in the body， the new low-temperature plasma air disinfector developed was used to inactivate the natural bacteria in the air under different parameters. Then in 1.05 m3 airtight organic glass cavity in the body， the new low-temperature plasma air disinfector was used to treat the Staphylococcus aureus and Escherichia coli under the condition of artificial bacteria spraying. Last， the plate counting method was used to evaluate the inactivation effect of the disinfector on natural bacteria and artificial bacteria in the air. 【Results】 For the low-temperature plasma air disinfector in 0.5 m3 and 1.05 m3 confined space， the lowest effective treatment parameters for inactivated natural bacteria were 13 kV， 5 min or 12 kV， 10 min. For the low-temperature plasma air disinfection machine in 13 kV discharge voltage treatment of different time， compared with before treatment， the killing rate of Escherichia coli and Staphylococcus aureus increased significantly after treatment for 20 min （P<0.000 1）. Both could meet the requirements of disinfection specifications ［100%， （99.98±0.01）%≥99.90%］. 【Conclusion】 The inactivation of natural bacteria and artificial bacteria by the new low-temperature plasma air disinfector has reached the qualified standard of disinfection stipulated in Technical Specifications for Disinfection.
RESUMEN
Objective@#To compare the disinfection effect of three-hole polypropylene infusion bottle stopper by central sterilization method and groove central sterilization method, and to explore the best method of three-hole polypropylene infusion bottle cap disinfection.@*Methods@#A total of 1 088 bottles of three-pore polypropylene infusion bottles from 10 hospitals in Panzhihua City and the surrounding areas of Chengdu were selected for disinfection, and the effects were compared by fluorescent powder tracing method and bacterial culture method respectively. The two methods were divided into two groups: bottle stopper Central Sterilization group and groove Central Sterilization group. Each nurse sterilized two groups of liquid.@*Results@#The total area of fluorescent powder residues after disinfection of 272 bottles of infusion bottles with different specifications M(P25, P75) was 0.26 (0, 2.51). The total area of fluorescent powder residues M(P25, P75) was 15 (8, 24). There were significant differences in the residual area of fluorescent powder between the two groups after liquid bottle disinfection (Z=-17.31, P<0.01). Thirty-four positive specimens of bacteria culture, 68 bacterial colonies and 158 bottles of infusion bottles were disinfected by central sterilization of 160 bottles. There were 15 positive samples and 30 colonies of bacteria cultured in the bottle disinfected by groove central disinfection method (χ2=2.773, P<0.05).@*Conclusion@#The groove center disinfection method is the best disinfection method for the bottle stopper of three-hole polypropylene infusion bottle.
RESUMEN
The paper introduces design principle and demand of the monitoring information system for disinfection effect,expatiates on the design and realization from the aspects like service process and functional modulens,explains design of the database table and points out that the system is able to realize effective real-time,scientific,standardized and systematized monitoring.
RESUMEN
Objective To investigate the sanitation status of dental model in medical institutions in Changning District of Shanghai, and to provide evidence for strengthening the disinfection management. Methods 40 medical institutions in Changning District of Shanghai were investigated by field sampling and detection. Results 92.5% of the investigated medical institutions disinfected dental models.In 168 dental model samples, the qualification rate of sanitary quality was 88.1%, while exceeded number of bacteria was the major reason for the unqualified.Among all dental model disinfection methods including ultraviolet irradiation, disinfectant soaking, disinfectant spraying and ozone, ultraviolet irradiation was the most widely used and disinfectant soaking was with the best effect.The storage sites of disinfected dental models including filling room, pollution area of sterilization room and other locations.Dental models stored in the filling room were with the highest qualification rate. Conclusion The current dental model sanitation status in medical institutions in Changning District of Shanghai is relatively unsatisfactory;supervision and inspection administration need to be strengthened by health and family planning administrative departments.
RESUMEN
Objective To summarize the application of ATP bioluminescence assay in surveillance of terminal disinfection of effects ,so as to provide the basis for intervention of disinfected effects .Methods ATP bioluminescence assay were employed to randomly test the surfaces of operating objects in therapeutic rooms and beside tables in wards ,total 144 object surfaces ,of each clinical departments in the whole hospital .The values of ATP bioluminescence assay were read on‐site ,0-250 RLU was recognized as qualification ,while disqualification when >250 RLU .The disqualified object surfaces were performed on‐site intervention that all of them were re‐disinfected ,the results were compared .Results Both the surfaces of operating objects and beside tables were dis‐qualified before disinfection ,and the values of ATP bioluminescence assay were 780 ± 10 .34 RL and 853 ± 13 .29 RLU respectively . The pass rates of ATP bioluminescence assay was 61 .97% of operating surfaces and 79 .45% of beside table surfaces the first dis‐infection .The disqualified sites were retested following on‐site intervention .The values of ATP bioluminescence assay were 431 .02 ± 0 .53 before intervention and 1 .43 ± 0 .59 after intervention ,and the difference was statistically significant .Conclusion ATP bi‐oluminescence assay can get more immediately ,simple and timesaving in evaluating the effect of disinfection and estimate the effi‐ciency of disinfection timely ,which can also provide the scientific basis on on‐site intervention so as to improve the execution power of hospital infection management .
RESUMEN
We identified the routes of infection and evaluate the effect of disinfection on the field of an outbreak of an-thrax in a village of Wengan County ,Guizhou ,China ,thus trying to provide with basis for the implementation of policies for pre-vention and control of anthrax .The authors gathered the cases information by searching and interviewing the targeted persons house by house ,and reviewed the medical records in hospitals .The samples including patient’s discharging fluid ,residues of died horse ,and soil from the places where the villagers dismembered horse were gathered and cultured for Bacillus anthracis . The technique of multiple-locus variable-number tandem repeat analysis (MLVA-8) was applied for revealing the genetic rela-tionships among those isolated Bacillus anthracis strains .Five cases of cutaneous anthrax occurred in the outbreak and the total attack rate was 7 .58% (5/66) among those contactors evolved in the activity of carrying ,dismembering ,washing ,chopping and eating the died horse .The attack rate was 100% (3/3) for those who carried ,dismembered ,washed ,chopped and ate that horse ,100% (1/1) for those who carried ,dismembered and ate ,and 7 .14% (1/14) for those who washed ,chopped and ate . The 25% (1/4) of the samples of discharging fluid from the cases with cutaneous anthrax were positive .After disinfection , 15 .38% (4/26) of the soil samples retained positive .The genetic similarity was 100% among the 5 isolate strains .The results suggested that the outbreak of anthrax in villagers occurred through the activities of carrying ,dismembering ,washing and chop-ping the died horse .Strengthening the risk communication and disinfection of the dismemberment places should be the crucial strategies to prevent and control anthrax epidemics in Guizhou in the future .
RESUMEN
Objective This article is to discuss the best injection time after alcohol disinfection during the prophylactic immunization,provide theoretical support to guarantee the effect of disinfection in practical work,also guarantee the effect of vaccination especially for the vaccination of attenuated live vaccine at the same time reduce the side effect in disinfection.Methods Choosing the vaccination objects as experimental subject,each period contained 40 people,who were named as group A,B,C,D,E,with a total of 200 people.Using sterile cotton swab sampling and agar plate cultivation method,counting bacteria.Selecting vaccine either in liquid or in lyophilized form,counting the time of picking up the vaccine,dissolving it,suction and preparing the injector.Results After alcohol disinfection,there was 1 person and 1 colony growth in group A within 25 s.There were 1 person and 4 colonies growth in group B within 40 s.There were 3 persons and 3 to 12 colonies growth in group C within 60 s,there were 5 persons and 2 to 8 colonies growth in group D within 80 s,there were 8 persons and 3 to 13 colonies growth in group E within 100 s.The difference between group A,B,C and D was not statistically significant.All four groups mentioned above had significant difference compared with group E.The time of whole process for vaccine either in liquid or in lyophilized form was 1.05 min and 29 s.Conclusions During vaccine injection,especially injectable attenuated live vaccine,it is safe time to finish injecting within 25 to 45 seconds.In the operating process of vaccine inoculation,the freeting and drying dosage-form vaccine,the operation sequence must be set as dissolve the seedlings,disinfection,checkup information again and injections.For water dosage-form vaccine,the operation sequence is to disinfection,pulling out seedlings,checkup information again and injections.
RESUMEN
Objective To iavestigate the influence of two disinfectants methods on disintection efficiency and model precision of dental impression.Methods Alginate impressions,alginate and agar complex impressions and silicon rubber impressions were made according to a unified standard.Chlorinous disinfectant solution and acidic oxidative potential water were used to disinfect the infected impressions.The influence of two disinfectants on disinfection efficiency and model precision of dental impression was compared.Results Two disinfectants for 30 minutes had significant disinfection effect on these three kinds of impressions.The effective rate reached 99.48％.Chlorinous disinfectant solution bad no significant influence on the model precision of alginate impressions and silicon rubber impressions,but had significant influence on the model precision of alginate and agar complex impressions.Acidic oxidative potential water did not influence the model precision of the three dental impressions.Conclusions Acidic oxidative potential water can be used to disinfect the three dental impressions.Chlorinous disinfectant solution can be used to disinfect alginate impressions and silicon rubber impressions,but cannot be used to disinfect agar complex impressions.
RESUMEN
0.05),but drying time was significantly various(P