Age Prediction Using Pixel Value Sum from Radiographic Proximal Femur in a Thai Population / Predicción de la Edad Utilizando la Suma de Valores de Pixeles del Fémur Proximal Radiográfico en una Población Tailandesa

SUMMARY: The present study aimed to investigate the utility of the proximal femur in the forensic age estimation by assessing changes in bone densities through radiographs. Using Otsu's threshold, bone density was quantified by counting all white pixel values within selected regions of interest, which include femoral head (FH), femoral neck (FN), Ward's triangle (WT), and greater trochanter (GT) from 354 left femora of Northern Thai descent. The pixel width of medullary cavity (MC) was also estimated. Furthermore, the study evaluated the performance of linear regression (LR) models for age estimation from radiographic images of proximal femora. Negative correlations were observed between FH, FN, WT, and GT pixel intensity with the age-at-death of the samples, with females exhibiting stronger correlations than males. Moreover, a positive correlation was found between age and MC width in female samples, while male MC widths did not show any relationship with increasing age. The results showed a slight difference between the LR model applied to both sexes, which integrated all variables, and the alternative configuration that only utilized relevant attributes. Both models exhibited similar performance, with a narrow range of root mean square error (RMSE) values, ranging from 12.67 to 12.71 years, and a correlation coefficient range of 0.51 to 0.52. For females, the LR model with FN and WT as selected attributes (RMSE = 11.85 years, correlation coefficient = 0.65) performed decently, while for males, the LR model with all variables showed RMSE of 12.52 years and correlation coefficient of 0.46. This study showcased the potential application of pixel intensity in predicting age.

El presente estudio tuvo como objetivo investigar la utilidad del fémur proximal en la estimación forense de la edad mediante la evaluación de cambios en las densidades óseas a través de radiografías. Utilizando el umbral de Otsu, la densidad ósea se cuantificó contando todos los valores de pixeles blancos dentro de regiones de interés seleccionadas, que incluyen la cabeza femoral (CF), el cuello femoral (CF), el triángulo de Ward (WT) y el trocánter mayor (TM) de 354 fémures izquierdos de ascendencia del norte de Tailandia. También se estimó el ancho de pixeles de la cavidad medular (CM). Además, el estudio evaluó el rendimiento de modelos de regresión lineal (RL) para la estimación de la edad a partir de imágenes radiográficas de fémur proximal. Se observaron correlaciones negativas entre la intensidad de los pixeles CF, CF, WT y TM con la edad de muerte, y las mujeres exhibieron correlaciones más fuertes que los hombres. Además, se encontró una correlación positiva entre la edad y el ancho del CM en muestras de mujeres, mientras que el ancho del CM del hombre no mostró ninguna relación con el aumento de la edad. Los resultados mostraron una ligera diferencia entre el modelo RL aplicado a ambos sexos, que integraba todas las variables, y la configuración alternativa que sólo utilizaba atributos relevantes. Ambos modelos mostraron un rendimiento similar, con un rango estrecho de valores del error cuadrático medio (RMSE), que oscilaba entre 12,67 y 12,71 años, y un rango de coeficiente de correlación de 0,51 a 0,52. Para las mujeres, el modelo RL con CF y WT como atributos seleccionados (RMSE = 11,85 años, coeficiente de correlación = 0,65) tuvo un desempeño satisfactorio, mientras que para los hombres, el modelo RL con todas las variables mostró un RMSE de 12,52 años y un coeficiente de correlación de 0,46. Este estudio mostró la posible aplicación de la intensidad de los pixeles en la predicción de la edad.

Sex Prediction of Hyoid Bone from Computed Tomography Images Using the DenseNet121 Deep Learning Model / Predicción del Sexo del Hueso Hioides a Partir de Imágenes de Tomografía Computarizada Utilizando el Modelo de Aprendizaje Profundo DenseNet121

SUMMARY: The study aims to demonstrate the success of deep learning methods in sex prediction using hyoid bone. The images of people aged 15-94 years who underwent neck Computed Tomography (CT) were retrospectively scanned in the study. The neck CT images of the individuals were cleaned using the RadiAnt DICOM Viewer (version 2023.1) program, leaving only the hyoid bone. A total of 7 images in the anterior, posterior, superior, inferior, right, left, and right-anterior-upward directions were obtained from a patient's cut hyoid bone image. 2170 images were obtained from 310 hyoid bones of males, and 1820 images from 260 hyoid bones of females. 3990 images were completed to 5000 images by data enrichment. The dataset was divided into 80 % for training, 10 % for testing, and another 10 % for validation. It was compared with deep learning models DenseNet121, ResNet152, and VGG19. An accuracy rate of 87 % was achieved in the ResNet152 model and 80.2 % in the VGG19 model. The highest rate among the classified models was 89 % in the DenseNet121 model. This model had a specificity of 0.87, a sensitivity of 0.90, an F1 score of 0.89 in women, a specificity of 0.90, a sensitivity of 0.87, and an F1 score of 0.88 in men. It was observed that sex could be predicted from the hyoid bone using deep learning methods DenseNet121, ResNet152, and VGG19. Thus, a method that had not been tried on this bone before was used. This study also brings us one step closer to strengthening and perfecting the use of technologies, which will reduce the subjectivity of the methods and support the expert in the decision-making process of sex prediction.

El estudio tuvo como objetivo demostrar el éxito de los métodos de aprendizaje profundo en la predicción del sexo utilizando el hueso hioides. En el estudio se escanearon retrospectivamente las imágenes de personas de entre 15 y 94 años que se sometieron a una tomografía computarizada (TC) de cuello. Las imágenes de TC del cuello de los individuos se limpiaron utilizando el programa RadiAnt DICOM Viewer (versión 2023.1), dejando solo el hueso hioides. Se obtuvieron un total de 7 imágenes en las direcciones anterior, posterior, superior, inferior, derecha, izquierda y derecha-anterior-superior a partir de una imagen seccionada del hueso hioides de un paciente. Se obtuvieron 2170 imágenes de 310 huesos hioides de hombres y 1820 imágenes de 260 huesos hioides de mujeres. Se completaron 3990 imágenes a 5000 imágenes mediante enriquecimiento de datos. El conjunto de datos se dividió en un 80 % para entrenamiento, un 10 % para pruebas y otro 10 % para validación. Se comparó con los modelos de aprendizaje profundo DenseNet121, ResNet152 y VGG19. Se logró una tasa de precisión del 87 % en el modelo ResNet152 y del 80,2 % en el modelo VGG19. La tasa más alta entre los modelos clasificados fue del 89 % en el modelo DenseNet121. Este modelo tenía una especificidad de 0,87, una sensibilidad de 0,90, una puntuación F1 de 0,89 en mujeres, una especificidad de 0,90, una sensibilidad de 0,87 y una puntuación F1 de 0,88 en hombres. Se observó que se podía predecir el sexo a partir del hueso hioides utilizando los métodos de aprendizaje profundo DenseNet121, ResNet152 y VGG19. De esta manera, se utilizó un método que no se había probado antes en este hueso. Este estudio también nos acerca un paso más al fortalecimiento y perfeccionamiento del uso de tecnologías, que reducirán la subjetividad de los métodos y apoyarán al experto en el proceso de toma de decisiones de predicción del sexo.

Biological Identification of Skulls in Indonesian and Thai Populations: Ancestry Estimation, Sex Determination, Stature Estimation, and Age Estimation / Identificación Biológica de Cráneos en Poblaciones de Indonesia y Tailandia: Estimación de Ascendencia, Determinación del Sexo, Estimación de Estatura y Estimación de Edad

SUMMARY: This review article will present an overview of biological profiles in forensic utilities. The biological profile of the skull in the existing literature can help to identify humans, especially if the condition of the victim found is a result of mutilation or a bomb explosion. When it comes to the precision of identifying skeletal remains, the human skull is frequently cited as being first in the estimation of age and ancestry and second in terms of sex and stature. It can be an alternative to assessing the following biological parameters: sex, age, stature, and ancestry. The implementation of biological profiles in the identification process is very important considering that some cases require the assistance of forensic anthropology. This review article shows the importance of the value of skulls. The method that can be applied is craniometry which can be used to determine sex, age, stature, and estimated ancestry. Different results will occur depending on the completeness of the skull. Therefore, estimation formulas have different accurate results. Discriminant function analysis has been performed on various measurement sets and its discriminant power has been validated by many researchers. Geometric morphometric analysis has become the main tool for shape analysis and many attempts have been made to use it in analyzing skulls. Several methods supported by technology have also been developed. It is hoped that the review article will show significant differences in results between studies in Thailand and Indonesia, even though they are in the same racial group.

Este artículo presenta una descripción general de los perfiles biológicos en las utilidades forenses. El perfil biológico del cráneo en la literatura existente puede ayudar a identificar a los humanos, especialmente si la condición en la que se encuentra la víctima es el resultado de una mutilación o la explosión de una bomba. Cuando se trata de la precisión en la identificación de restos óseos, el cráneo humano se cita con frecuencia como el primero en la estimación de edad y ascendencia y el segundo en términos de sexo y estatura. Puede ser una alternativa para evaluar los siguientes parámetros biológicos: sexo, edad, estatura y ascendencia. La implementación de perfiles biológicos en el proceso de identificación es importante considerando que algunos casos requieren la asistencia de la antropología forense. Este artículo de revisión muestra la importancia del valor de las cnezas óseas. El método que se puede aplicar es la craneometría para determinar el sexo, la edad, la estatura y la ascendencia estimada. Se pueden obtener diferentes resultados dependiendo de la integridad del cráneo. Por lo tanto, las fórmulas de estimación tienen resultados precisos diferentes. Se ha realizado un análisis de función discriminante en varios conjuntos de medidas y muchos investigadores han validado su poder discriminante. El análisis a través de la morfometría geométrica se ha convertido en la principal herramienta para el análisis de formas y se ha utilizado frecuentemente en el análisis de cráneos. También se han desarrollado varios métodos apoyados en la tecnología. Se espera que este trabajo muestre diferencias significativas en los resultados entre los estudios realizados en Tailandia e Indonesia, aunque pertenezcan al mismo grupo racial.

Quantitative evaluation of gender differences in supraclavicular fat related to fat metabolism with IDEAL-IQ in healthy young adults / 实用放射学杂志

Objective To evaluate the gender differences in fat water fraction(FWF)related to fat metabolism in supraclavicular region of neck with iterative decomposition of water and fat with echo asymmetry and least square estimation iron quantification(IDEAL-IQ)sequence quantitatively.Methods Twenty healthy female and twenty healthy male volunteers were selected for a MRI examination with IDEAL-IQ,then the FWF of R2*,brown adipose tissue(BAT)and white adipose tissue(WAT)were obtained by post-processing.The differences of FWF between the two groups were compared by Mann-Whitney U test.Results There was sig-nificant difference in the FWF of BAT and WAT between the two groups(P＜0.05).The FWF of BAT in the female was higher than that the male,and the FWF of WAT in the male was higher than that the female,there was no significant difference in the R2*between the two groups(P＞0.05).Conclusion IDEAL-IQ sequence can be used to evaluate the FWF in supraclavicular region of neck quantitatively,and classify BAT and WAT,then provide clinical according to the quantitative study of fat content.

Two-Dimensional Geometric Morphometric Method on Frontal Sinus for Race Estimation: A Lateral Skull Radiograph Study

@#Introduction: Race estimation of unknown individual is essential in forensic investigation. The resiliency of frontal sinus makes it a potential tool for biological profiling, particularly in cases where fragmented skeleton persists. Geometric morphometrics is an efficient way to characterise shape. However, the use of frontal sinus to identify race of Malaysians is yet to be investigated. This research employed a two-dimensional (2D) geometric morphometric to examine the morphological differences of the frontal sinus among the major races in Malaysia. Methods: Lateral skull radiographs which comprising of 453 adult Malaysian (151 Malays, Chinese and Indian respectively) were used. The 2D landmarks of eight were placed on the digitalized radiographs and 2D geometric morphometric analysis was performed using MorphoJ software. Results: Procrustes ANOVA revealed a significantly different frontal sinus shape (p-value < 0.05) between races. Canonical variate analysis showed significantly different frontal sinus morphology (p-value < 0.05) between Malay and Indian as well as Chinese and Indian. Discriminant function analysis with cross-validation demonstrated a 57.4% accuracy rate. Conclusion: This population-specific study based on frontal sinus of Malaysians using the 2D geometric morphometric, though less reliable, sheds new light on the potential applicability of this method for race estimation purpose.

Rupture-A symbolic timing point of the natural abdominal rupture during cadaver decay / 中国法医学杂志

Objective Corruption is the most common cadaver phenomenon in forensic practice and an important basis for inferring time of death(PMI),but the definition of corruption degree and the construction of model inference models have always been difficult in the practice of forensic science.Methods In this study,the late postmortem phenomena were observed.Meanwhile,the microbial flora structure of gut and gravesoil and the nature of gravesoil were detected,for analyzing the changes before and after the key moment of abdominal rupture which naturally happened during the cadaver decay.Results The results found that from the macroscopic and microscopic levels,there were significant differences in cadaver decay,including microbial flora structure and gravesoil properties before and after the key moment of the natural abdominal rupture during cadaver decay.The phenomena are highly observable and can be accurately judged by forensic examinations,as well as related means in the field of biology and physiochemistry.In this study,this critical event was called Rupture Point.Conclusion The Rupture Point can be used as an important node for the assessment of cadaver decay degree in the practice of forensic medicine.It can be utilized for a cut-off point as well when constructing PMI inference models based on microbial flora structure changes.The accuracy of PMI inference models can be improved when the models were constructed in segments.

Correlation study of age,gender and lumbar vertebral marrow fat in adults based on MRI iterative decomposition of water and fat with echo asymmetry and least-squares estimation image quantitation imaging technique / 中国脊柱脊髓杂志

Objectives:To investigate the relationships between vertebral marrow fat in lumbar spine and age and gender in adults using iterative decomposition of water and fat with echo asymmetry and least-squares estimation image quantitation(IDE AL-IQ)magnetic resonance imaging technology.Methods:The IDEAL-IQ fat fraction images from 298 subjects(Male:138,Female:160,age range:20-69 years old)were collected.All the patients were divided into 5 groups based on age,with each group spanning a range of 10 years:age range 20-29 years(Twenties):24 males,20 females;30-39 years(Thirties):47 males,39 females;40-49 years(Forties):36 males,47 females;50-59 years(Fifties):20 males,37 females;60～69 years(Sixties):11 males,17 females.The bone marrow proton density fat fration(PDFF)were measured using GE ADW4.6 processing work station.Results:In the same age group,there were differences in vertebral bone marrow PDFF between gen-ders.PDFF of L1-L5 vertebrae was significantly higher in males than females in twenties,thirties and forties(P＜0.05).In the fifties,there was no statistically significant difference in the L1-L5 vertebrae PDFF between males and females(P＞0.05);while in the sixties,the PDFF of the L1-L5 vertebrae was lower in males than that in females(P＜0.05).The PDFF of lumbar vertebral bone marrow was positively correlated with age,with a higher correlation observed in females(r=0.72,P＜0.05)than that in males(r=0.32,P＜0.05).From the age of 20 to 69,the L4 vertebra PDFF in males had the highest growth rate(21.08％),while the L1 vertebra PDFF in female had the highest growth rate(65.68％).For males,the growth of PDFF was primarily concentrated in the thirties and fifties;The PDFF of L1,L4,and L5 vertebrae showed the largest increase in the fifties,while that of L2 and L3 vertebrae had the highest increase rate in the thirties.For females,vertebral PDFF showed a slight decrease trend in the group of thirties,which gradually increased subsequently in all vertebare in the group of forties,fifties,and sixties,with the largest increase rate observed in the fifties.Conclusions:There are differences in vertebral fat distribution between males and females across different age groups,and the growth rates of vertebral PDFF also vary;the PDFF of vertebral bodies in different segments of the lumbar spine is positively correlated with age.

Simulation of Subgroup Analysis Methods with Longitudinal Data Containing Measurement Errors and Missingness / 中国卫生统计

Objective To develop a subgroup analysis method that can simultaneously deal with longitudinal data containing measurement errors and dropouts.Methods Subgroup analysis was carried out based on a threshold regression model.A new generalized unbiased estimation equation is constructed by using the independence between repeated measurements to deal with measurement errors and introducing an inverse probability weighting matrix to deal with missing response.Results The computer stochastic simulation shows that the proposed estimation method is effective in dealing with measurement errors and dropouts,and has smaller bias and mean square error than the generalized estimation equation method without correcting measurement errors or dropouts.Conclusion In subgroup analysis,when there are measurement errors in covariables and missing values in response variables,it is usually necessary to deal with the measurement errors and missing values in order to obtain reliable parameter estimation.

Analysis of radiological health standards related to biodosimetry / 中华放射医学与防护杂志

Based on an overreview of Chinese radiological health standards, the Chinese radiological health standards currently in effect for biodosimetry were analyzed with respect to their current status, application and existing problems. Furthermore the improvement measures and development trends were put forward.

Application of Monte Carlo simulation in radiation dose estimation and optimization for diagnostic radiology / 中华放射医学与防护杂志

The increasing frequency of radiographic diagnostic imaging and the cumulative dose to the public from radiation has raised widespread concerns. However, accurate measurement of the radiation dose received by the human body is difficult to achieve. Monte Carlo simulation, as a numerical computational method guided by probability statistics theory, has been applied to various dose assessments, imaging optimizations, and radiation protection in radiographic diagnostic imaging. We provide a comprehensive review of the principles of the Monte Carlo method, the modelling process of Monte Carlo simulation and the progress of its application to diagnostic radiological dose estimation.

Establishing a three-dimensional model for estimating partial-body irradiation doses based on γ-H2AX foci detection / 中华放射医学与防护杂志

Objective:To construct a three-dimensional time-dose-response model for dose estimation and validate its feasibility.Methods:Based on a random number table, mice were divided into 0, 2, 4, 6, and 8 Gy groups for whole-body X-ray irradiation, with each group consisting of three mice. Hair follicle cells of whiskers were sampled at 1, 6, and 24 h after the irradiation. After immunofluorescence staining, the numbers of γ-H2AX foci at different time points from 1 to 24 h post-irradiation were observed using a confocal laser scanning microscope. The average numbers of γ-H2AX foci observed were corrected using the Dolphin’s model, followed by the fitting of dose-response curves. Using the R software, the equations and surfaces of the three-dimensional model for partial-body irradiation were established using the irradiation doses, post-irradiation time, and the corrected average numbers of γ-H2AX foci.Results:The average number of γ-H2AX foci increased with dose at fixed time points 1, 6, and 24 h but decreased with irradiation time at fixed doses 2, 4, 6, and 8 Gy. The dose-response curve equations of partial-body irradiation were fitted as follows: YF = 2.853+ 3.775 D, R2= 0.928, at 1 h after the irradiation; YF = 0.144+ 2.775 D, R2= 0.903, at 6 h after the irradiation; YF = 0.066+ 2.472 D, R2= 0.85, at 24 h after the irradiation. The three-dimensional model equation fitted was YF = 6.837 t-1.728+ 3.113 t-0.071D, R2=0.897. Substituting different post-irradiation time points into the three-dimensional surface model appeared as a two-dimensional linear model. By substituting the number of γ-H2AX foci and irradiation time into the linear and the three-dimensional models, both models yielded relative deviations between the estimated and actual radiation doses of 30% or less. Conclusions:The three-dimensional time-dose-response model, established by using the number of γ-H2AX foci to estimate partial-body irradiation doses, can be preliminarily applied for dose estimation at all time points 1-24 h after irradiation.

Analysis of intercomparison results of national biological dose estimation capability in 2022 / 中华放射医学与防护杂志

Objective:To improve the ability of radiation health technical institutions for biological dose estimation.Methods:A total of 144 institutions nationwide, including the CDC, prevention and treatment center for occupational disease, colleges and universities, scientific research institutes, nuclear industry systems, and medical and physical examination institutions, were organized to carry out the intercomparison of national biological dose estimation capabilities in 2022. The institutions participating in the comparison were divided into two types of A and B, through the identification of chromosome aberrations, to estimate the irradiation dose (A) or chromosome aberration rate (B). The results were summarized and compared, and the main problems were analyzed and discussed.Results:There were 60 institutions in type A, 52 qualified institutions (including 12 excellent institutions) and 8 unqualified institutions, with a pass rate of 86.7% (20.0% excellent) and a failure rate of 13.3%. There were 84 institutions participating in the biological dose estimation comparison of type B, with 48 qualified institutions, and 36 unqualified institutions, the qualified rate was 57.1%, and the unqualified rate was 42.9%.Conclusions:Most of the institutions participating in type A comparison have the ability to estimate biological dose, and more than half of the institutions participating in type B comparison have the ability to analyze chromosome aberration. The overall ability of institutions participating in type A comparison is higher than in type B.

Establishment and validation of a dose-response curve for semi-automatic analysis of dicentric chromosomes / 中国职业医学

ObjectiveTo establish a dose-effect curve for semi-automatic analysis of dicentric chromosomes(DC) based on an automatic chromosome analysis system. Methods A total of three healthy volunteers were recruited as the study subjects, and their peripheral blood was collected and stimulated by X-ray at doses of 0.00, 0.10, 0.25, 0.50, 0.75, 1.00, 2.00, 3.00, 4.00, and 5.00 Gy, with the absorbed dose rate of 1.0 Gy/min. Images of DC in the mid-stage of cell division were collected using a high-throughput automatic chromosome analysis system. The DCScore software was used to automatically analyze DC aberrations, and a dose-effect curve for semi-automatic analysis of DC was fitted after manual confirmation. The fitted dose-effect curve for semi-automatic analysis of DC was validated for accuracy using three proficiency test samples from the national quality assessment of biological dose. Results The incidence of DC increased with increasing irradiation doses in the range of 0.00-5.00 Gy (P<0.01). The dose-effect curve for the fitted semi-automatic analysis of DC was ŷ =0.000 8 (±0.000 2) +0.009 2(±0.000 9) D+0.014 2(±0.000 4) D2 (R2= 0.999 8). The relative deviation between the estimated dose and the actual dose of the three test samples was about 20.00%, indicating curve applicability for biological dose estimation. Moreover, excluding the time spent on manual analysis, the semi-automatic analysis method increased the analysis efficiency by 26.0 times. Conclusion The semi-automatic analysis dose-effect curve for DC stimulated by X-ray is constructed for biological dose estimation, which can reduce the manual analysis time, and holds great potential for application in nuclear emergency response to large-scale radiation accidents.

Influence of individual factors and labor organization on musculoskeletal disorders of automobile manufacturing workers / 公共卫生与预防医学

Objective To investigate the influence of individual factors and labor organization factors on work-related musculoskeletal disorders (WMSDs) in automobile manufacturing workers, and to provide a scientific basis for the prevention and treatment of WMSDs in automobile manufacturing workers. Methods In April 2020, 5564 workers in an automobile factory were selected by cluster sampling method. The prevalence of WMSDs was investigated by using the Musculoskeletal Disorders Questionnaire, and the influence of individual factors and labor organization factors on WMSDs was investigated by using generalized estimation equation. Results The prevalence rate of WMSDs was 79.00% (4396/5564), and the prevalence rate of multisite WMSDs was 67.95% (3781/5564). The analysis of generalized estimation equation showed that doing the same job every day (OR= 1.478, P 40 hours per week increased the risk of WMSDs (P< 0.05). Male and adequate rest time were protective factors for WMSDs. The job correlation matrix showed that WMSDs in most parts had a positive correlation. Conclusions The prevalence of multisite WMSDs of workers in automobile manufacturing industry is high, and unreasonable labor organization is the main risk factor of WMSDs. Appropriate work breaks can effectively reduce the risk of WMSDs, and effective intervention measures should be carried out to prevent the occurrence of WMSDs in workers in automobile manufacturing industry. The generalized estimation equation can better analyze the influencing factors of WMSDs.

Estimativa de incidência de câncer no Brasil e regiões em 2018: aspectos metodológicos / Estimation of cancer incidence in Brazil and its regions in 2018: methodological aspects / Estimación de la incidencia del cáncer en Brasil y regiones en 2018: aspectos metodológicos

Resumo: O objetivo deste estudo foi desenvolver metodologia para estimar a incidência de câncer no Brasil e regiões. A partir de dados dos registros de câncer de base populacional (RCBP) e do Sistema de Informações sobre Mortalidade (SIM) foram calculadas razões de incidência e mortalidade (I/M) anuais, tipo de câncer, faixa etária e sexo em cada RCBP. Para estimar as razões I/M por região em 2018, foram aplicados modelos multiníveis longitudinais de Poisson. A estimativa de casos novos de câncer, em 2018, foi calculada aplicando-se as razões I/M estimadas ao número de óbitos corrigidos do SIM ocorridos naquele ano. Norte e Nordeste concentraram as menores razões I/M. Os cânceres de pâncreas, pulmão, fígado e esôfago tiveram as menores razões I/M, enquanto as maiores razões I/M foram estimadas para câncer de tireoide, testículo, próstata e mama feminina. Para 2018, foram estimados 506.462 casos novos de câncer no Brasil. Mama feminina e próstata foram os dois principais tipos de câncer em todas as regiões. No Norte e no Nordeste, destacaram-se os cânceres do colo do útero e de estômago. Diferenças nas razões I/M entre as regiões foram observadas e podem estar relacionadas ao desenvolvimento socioeconômico e ao acesso a serviços de saúde.

Abstract: The aim of this study was to develop a methodology for estimating cancer incidence in Brazil and its regions. Using data from population-based cancer registries (RCBP, acronym in Portuguese) and the Brazilian Mortality Information System (SIM, acronym in Portuguese), annual incidence/mortality (I/M) ratios were calculated by type of cancer, age group and sex in each RCBP. Poisson longitudinal multilevel models were applied to estimate the I/M ratios by region in 2018. The estimate of new cancer cases in 2018 was calculated by applying the estimated I/M ratios to the number of SIM-corrected deaths that occurred that year. North and Northeast concentrated the lowest I/M ratios. Pancreatic, lung, liver and esophageal cancers had the lowest I/M ratios, whereas the highest were estimated for thyroid, testicular, prostate and female breast cancers. For 2018, 506,462 new cancer cases were estimated in Brazil. Female breast and prostate were the two main types of cancer in all regions. In the North and Northeast, cervical and stomach cancers stood out. Differences in the I/M ratios between regions were observed and may be related to socioeconomic development and access to health services.

Resumen: El objetivo de este estudio fue desarrollar una metodología para estimar la incidencia de cáncer en Brasil y sus regiones. A partir de datos de los registros de cáncer de base poblacional (RCBP) y el Sistema de Informaciones de Mortalidad (SIM), se calcularon las tasas anuales de incidencia y mortalidad (I/M), tipo de cáncer, grupo de edad y sexo en cada RCBP. Para estimar las tasas de I/M por región en 2018, se aplicaron modelos multinivel longitudinales de Poisson. Los nuevos casos de cáncer en 2018 se estimaron mediante la aplicación de las tasas I/M que se esperan para el número de muertes corregidas de SIM que habían ocurrido ese año. Las regiones Norte y Nordeste concentraron las más bajas tasas de I/M. Los cánceres de páncreas, pulmón, hígado y esófago tuvieron las más bajas tasas de I/M, mientras que las más altas tasas de I/M se estimaron para los cánceres de tiroides, testículos, próstata y mama femenina. Para 2018, se estimaron 506.462 nuevos casos de cáncer en Brasil. La mama femenina y la próstata representaron técnicas de estimación y configuraron ser los tipos principales de cáncer en todas las regiones. En el Norte y el Nordeste se destacaron los cánceres de cuello uterino y estómago. Se observaron diferencias en las tasas de I/M entre regiones, las cuales pueden estar relacionadas con el desarrollo socioeconómico y el acceso a los servicios de salud.

Sex Determination in the Contemporary Chilean Population by Mandible Analysis in Panoramic Radiographies / Estimación Sexual de la Población Chilena Contemporánea Mediante Análisis de la Mandíbula en Radiografías Panorámicas

SUMMARY: Sex identification of a deceased human individual by means of the mandible is very important for forensic dentistry. The aim of the present study was to determine the sex of Chilean individuals by mandible analysis in panoramic radiographies. Linear and angular parameters of the mandible were analyzed from panoramic radiographies (PR). The study included PR of adult Chilean individuals, of both sexes, with optimum solution and contrast, and which allowed the angles and rami of the mandible to be viewed. Sex was determined by univariate and bivariate discriminant function analysis. The sample consisted of 594 PR of individuals aged between 18 and 84 years. The best sex predictor using univariate discriminant function analysis was the mandibular ramus height (MRH) (74.1 %), followed by the distance from the mental foramen - mandibular base (DMF-MB) (69.1 %) and the bicondylar breadth (BC) (66.7 %). The parameters that presented the lowest sex prediction were the angle of the mandible (AM) with 55.0 % and the distance between mental foramina (DMF) with 53.7 %. The best sex prediction was obtained by the step model of discriminant function analysis (80.2 %), including only three parameters: MRH, BC and DMF-MB. The parameters height of the mandibular ramus, bicondylar breadth and distance from the mental foramen - base of the mandible are good predictors of sex in Chilean individuals when used in conjunction; they are therefore indicated for sex determination in the contemporary Chilean population.

La identificación humana de un individuo fallecido a través de la mandíbula es muy relevante para la odontología forense. El objetivo de este estudio fue estimar el sexo de individuos Chilenos a través del análisis de la mandíbula, utilizando radiografías panorámicas. Fueron analizados parámetros lineales y angulares de la mandíbula, a través de radiografías panorámicas (RP). Se incluyeron RP de individuos chilenos adultos, ambos sexos, con solución y contraste óptimos, y que permitían la visualización de los ángulos y ramas de la mandíbula. Se realizó análisis por función discriminante univariada y bivariada para estimación del sexo. Fueron incluidas 594 RP de individuos entre 18 y 84 años. Para el análisis de función discriminante univariado, la altura de la rama mandibular (ARM) fue el parámetro más predictivo (74,1 %), seguido de la distancia foramen mentoniano - base de la mandíbula (DFM-BM) (69,1 %) y el ancho bicondilar (ABCo) (66,7 %). Los parámetros que presentaron menor predicción sexual fueron el ángulo de la mandíbula (AM) con un 55,0 % y la distancia inter-forámenes mentonianos (DIFM), con el 53.7 %. El análisis por pasos fue el modelo de análisis de función discriminante que presentó la mayor predicción sexual (79,5 %), en el cual fueron incluidos sólo tres parámetros: ARM, ABCo y DFM-BM. Los parámetros altura de la rama de la mandíbula, ancho bicondilar y distancia desde el foramen mentoniano hasta la base de la mandíbula son buenos predictores del sexo en individuos Chilenos cuando utilizados en conjunto y están indicados para estimar el sexo en la población chilena contemporánea.

An integrative literature review of the potential technical challenges in Forensic Odontology practice ­ an exploratory study / Uma revisão integrativa da literatura sobre os potenciais desafios técnicos na prática da Odontologia Forense ­ um estudo exploratório

Forensic Odontology deals with the presentation of dental evidence in a court of law. An academic exploration revealed instances of technical challenges within the field. This study endeavours to delve into the spheres where these challenges occur, with the core objective of enhancing the quality of practice. An integrative literature review was conducted using the online platforms SCOPUS and Web of Science. Based on the selection criteria, 29 pertinent papers dated 2000-2023 were included. Quantitative analysis of the categories of selected articles was performed using Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, USA). Technical concerns were reported in all facets of Forensic Odontology with the general role of expert witnesses being reported the most (n=8; 27.58%). Within the different facets of the field, age estimation was the most prominent area of concern (n=8; 27.58%) and child abuse and neglect (n=1; 3.57%) represented the least reported category. Findings indicate that there is a need to prioritize avenues to enhance the quality of practice in the general role of expert witnesses and the specific area of dental age estimation. To this end, increased support for researchers must be provided to help validate methodologies. It is advisable to institute mandatory formal training and proficiency testing within the field. Inadequate knowledge of dentists regarding child abuse and neglect has been noted, demonstrating the need for more dedicated quality training. Recommendations for Forensic Odontologists have been curated combining this study's results and the codes of ethics of various forensic organisations

A Odontologia Legal trata da apresentação de provas odontológicas em juízo. Uma exploração acadêmica revelou exemplos de desafios técnicos na área. Este estudo procura aprofundar as esferas onde estes desafios ocorrem, com o objetivo central de melhorar a qualidade da prática. Foi realizada uma revisão integrativa da literatura utilizando as plataformas online SCOPUS e Web of Science. Com base nos critérios de seleção, foram incluídos 29 artigos pertinentes datados de 2000-2023. A análise quantitativa das categorias dos artigos selecionados foi realizada no Microsoft Excel 2019 (Microsoft Corp., Redmond, WA, EUA). Preocupações técnicas foram relatadas em todas as áreas da Odontologia Legal, sendo o papel geral dos peritos o mais relatado (n=8; 27,58%). Dentro das diferentes áreas de atuação, a estimativa da idade foi a área de preocupação mais proeminente (n=8; 27,58%), e o abuso infantil e a negligência (n=1; 3,57%) representaram a categoria menos relatada. Os resultados indicam que há uma necessidade de priorizar caminhos para melhorar a qualidade da prática no papel geral dos peritos e na área específica da estimativa da idade dental. Para este efeito, deve ser prestado maior apoio aos investigadores para ajudar a validar metodologias. É aconselhável instituir treinamento formal obrigatório e testes de proficiência na área. Foi observado um conhecimento inadequado dos dentistas sobre abuso e negligência infantil, demonstrando a necessidade de uma formação mais dedicada e de qualidade. As recomendações para Dentistas Forenses foram selecionadas combinando os resultados deste estudo e os códigos de ética de várias organizações forenses.

Limitaciones Técnicas del Método de Conteo de Anulaciones del Cemento para Estimación de Edad. Hallazgos a Partir de Una Revisión con Búsqueda Sistemática / Technical Limitations of Cementum Annulation Count Method for age Estimation. Findings From A Scoping Review

En la última década, la odontología forense se ha enfocado en el desarrollo de metodologías para la estimación de edad (EE) debido a la gran demanda en procesos identificatorios. Entre esas técnicas, el conteo de anulaciones del cemento dental (TCA) ha ofrecido resultados promisorios, pero también contradictorios que han generado dudas sobre su precisión y confiabilidad. El objetivo de este trabajo fue caracterizar, establecer alcances, e identificar las limitaciones del conteo de TCA según los actuales estándares normativos y metodológicos. Se realizó una revisión con búsqueda sistemática del método de conteo de TCA para EE incluyendo estudios experimentales y notas técnicas en las bases PubMed/Medline, Scopus, Web of Science (WoS) y Embase. Se emplearon los términos "estimation", "age" y "cementum", con búsqueda manual complementaria en Google Scholar. Se excluyeron revisiones, estudios en colecciones arqueológicas, estudios radiológicos y cartas al editor. La búsqueda arrojó un total de 273 artículos, seleccionándose 27 que cumplieron con los criterios de inclusión. La mayoría de los estudios fueron publicados en Asia, particularmente en India (n=21). Sólo 6 artículos declararon el número total de individuos, tipos de diente y de cortes histológicos, siendo el premolar el más estudiado. Apenas dos artículos evaluaron la calidad de la muestra a analizar mediante legibilidad de los cortes obtenidos. El test más empleado para evaluar la precisión del método fue el coeficiente de correlación de Pearson (n=21). Estos hallazgos exponen la alta heterogeneidad reportada en las metodologías de EE mediante conteo por TCA, por lo que aún no existe un proceso estandarizado que abarque todas sus etapas y entregue resultados confiables siguiendo los estándares jurídicos actuales para la evidencia científica. Un mayor control de las limitaciones técnicas detectadas aumentará el valor como prueba en un contexto identificatorio legal o forense.

SUMMARY: In the last decade, forensic odontology has focused on the development of age estimation (AE) methodologies due to the great request in identification processes. Among these techniques, the tooth cementum annulation (TCA) count method has offered promising but also contradictory results, raising questions about its accuracy and reliability. The aim of this work was to characterize, establish the scope, and identify the limitations of the TCA count method according to the current normative and methodological standards. A scoping review was carried out for TCA count methods for AE, including experimental studies and technical notes in the PubMed/Medline, Scopus, Web of Science (WoS) and Embase databases. The terms "estimation", "age" and "cementum" were used, with a complementary manual search in Google Scholar. Reviews, studies in archaeological collections, radiological studies and letters to the editor were excluded. The search yielded a total of 273 articles, selecting 27 of them that met the inclusion criteria. Most of the studies were published in Asia, particularly India (n=21). Only 6 articles declared the total number of individuals, types of teeth, and histological sections, with the premolar being the most studied. Only two articles evaluated the quality of the sample to be analyzed through the legibility of the cuts obtained. The most widely used test to assess the precision of the method was the Pearson correlation coefficient (n=21). These findings expose the high heterogeneity reported in EE methodologies by counting TCA, so there is still no standardized process that covers in all its stages and delivers reliable results following current legal standards for scientific evidence. More control of the detected technical limitations will increase the value as evidence in a legal or forensic identification context.

Estimation of Stature Based on Metatarsal Bones in a Thai Population / Estimación de la Estatura Basada en los Huesos Metatarsianos en una Población Tailandesa

SUMMARY: Stature estimation is one of the essential procedures for personal identification in forensic osteology. Therefore, the purposes of this study are to analyze the correlation between length and width of metatarsal measurements and stature, and to develop the regression equations for a Thai population. In this study, the samples were divided into two groups. The first group was called the "training group" for generating stature estimation equations, comprised of 200 skeletons, aged between 19-94 years. The second group was called the "test group" for evaluating the accuracy of generated equations, comprising 40 skeletons. The correlation between metatarsal parameters and stature were moderate to high, and all variables had positive significant correlation with stature. For males, the left ML2 is the length variable that showed the most correlation degree against stature (r=0.702), and the left MSW4 is the width variable that had the most correlation degree against stature (r=0.483). For females, right ML1 is the length variable that had the most correlation degree against stature (r=0.632), and right PW3 is the width stature that had the most correlation degree against stature (r=0.481). For all samples, left ML1 was the length variable that had the most correlation degree against stature (r=0.796) and right PW3 was the width variable that had the most correlation degree against stature (r=0.712). The results of generating multiple regression equations using a stepwise method reveals that the correlation coefficient (R) and standard error of estimate (SEE) were 0.761 and 4.96 cm, respectively, for males, and 0.752 and 4.93 cm for females, with 0.841 and 5.26 cm for all samples, respectively. According to these results, the mean of absolute error from the test group ranged from 3 to 5 cm. Therefore, stature estimation equations using length and width of metatarsals from our study can be applied to estimate stature in the Thai population.

La estimación de la estatura es uno de los procedimientos esenciales para la identificación personal en osteología forense. Por lo tanto, los propósitos de este estudio fueron analizar la correlación entre la longitud y el ancho de las medidas metatarsianas y la estatura, y desarrollar las ecuaciones de regresión para una población tailandesa. Las muestras se dividieron en dos grupos. El primer grupo se denominó "grupo de entrenamiento" para generar ecuaciones de estimación de estatura, compuesto por 200 esqueletos, con edades comprendidas entre los 19 y los 94 años. El segundo grupo se denominó "grupo de prueba" para evaluar la precisión de las ecuaciones generadas, que comprende 40 esqueletos. La correlación entre los parámetros metatarsianos y la estatura fue de moderada a alta, y todas las variables tuvieron una correlación significativa positiva con la estatura. Para el sexo masculino, la variable longitud ML2 izquierda es la que mayor grado de correlación presentó con la estatura (r=0,702), y la izquierda MSW4 fue la variable ancho la que mayor grado de correlación presentó con la estatura (r=0,483). Para el sexo femenino, ML1 derecho fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,632), y PW3 derecha fue la variable ancho estatura que tuvo mayor grado de correlación con la estatura (r=0,481). Para todas las muestras, ML1 izquierdo fue la variable longitud que tuvo mayor grado de correlación con la estatura (r=0,796) y PW3 derecha fue la variable ancho que tuvo mayor grado de correlación con la estatura (r=0,712). Los resultados de generar ecuaciones de regresión múltiple usando un método paso a paso revela que el coeficiente de correlación (R) y el error estándar de estimación (SEE) fueron 0,761 y 4,96 cm, respectivamente, para los hombres y 0,752 y 4,93 cm para las mujeres, con 0,841 y 5,26 cm para todas las muestras, respectivamente. De acuerdo con estos resultados, la media del error absoluto del grupo de prueba osciló entre 3 y 5 cm. Por lo tanto, las ecuaciones de estimación de la estatura que utilizan la longitud y el ancho de los metatarsianos de nuestro estudio se pueden aplicar para estimar la estatura en la población tailandesa.

Validación de un modelo para la estimación del contenido de agua del suelo mediante espectroscopía en el infrarrojo cercano

El monitoreo del contenido de humedad en el suelo es especialmente importante, ya que proporciona información relevante para tomar decisiones acertadas, en cuanto a riego, fertirriego y manejo del estrés hídrico. Este trabajo tiene como objetivo validar un modelo de estimación del contenido de agua en el suelo, mediante espectroscopía de reflectancia difusa en el rango del infrarrojo cercano. Los suelos evaluados provienen de los municipios de Puerto Gaitán (Meta), Espinal (Tolima) y Mosquera (Cundinamarca). En los dos primeros se establecieron redes rígidas, para seleccionar los puntos de muestreo y empleando dos profundidades en cada caso (0-10 y 10-30; 0-10 y 10-25 cm, respectivamente). Para el tercero, se describieron 77 calicatas y se tomaron muestras a 0-10 y 10-35 cm de profundidad. Posteriormente, se evaluó el contenido de humedad considerando 0, 15 y 30 % de humedad. Los datos obtenidos se analizaron con estadística descriptiva. Se empleó la validación cruzada y externa para cada modelo y se obtuvo un modelo general, a partir de los datos de los tres sitios. Los modelos obtenidos para cada sitio de muestreo y el modelo general tienen buena capacidad predictiva. Según los resultados, se afirma que la espectroscopía de reflectancia difusa NIR es una excelente opción para determinar el contenido de agua en el suelo. De igual manera, a partir del análisis de componentes principales, se identificó una diferenciación entre contenidos de agua de los suelos estudiados.

Monitoring soil moisture content is especially important as it provides relevant information for making informed decisions regarding irrigation, fertigation, and water stress management. This study aims to validate a model for estimating soil water content using diffuse reflectance spectroscopy in the near-infrared range. The evaluated soils come from the municipalities of Puerto Gaitán (Meta), Espinal (Tolima), and Mosquera (Cundinamarca). In the first two municipalities, rigid networks were established to select sampling points, with two depths considered for each case (0-10 and 10-30 cm; 0-10 and 10-25 cm, respectively). For the third municipality, 77 soil pits were described, and samples were taken at depths of 0-10 and 10-35 cm. Subsequently, moisture content was evaluated at 0, 15, and 30 % moisture levels. The obtained data were analyzed using descriptive statistics. Cross-validation and external validation were applied to each model, and a general model was developed based on the data from all three sites. The obtained models for each sampling site and the general model demonstrated good predictive capacity. Based on the results, it is affirmed that near-infrared diffuse reflectance spectroscopy is an excellent option for determining soil water content. Similarly, principal component analysis identified differentiation between water contents of the studied soils.