Intelligent fault diagnosis expert system for multi-parameter monitor based on fault tree / 生物医学工程学杂志

Aiming at the dilemma of expensive and difficult maintenance, lack of technical data and insufficient maintenance force for modern medical equipment, an intelligent fault diagnosis expert system of multi-parameter monitor based on fault tree was proposed in this study. Firstly, the fault tree of multi-parameter monitor was established and analyzed qualitatively and quantitatively, then based on the analysis results of fault tree, the expert system knowledge base and inference engine were constructed and the overall framework of the system was determined, finally the intelligent fault diagnosis expert system for multi-parameter monitor was developed by using the page hypertext preprocessor (PHP) language, with an accuracy rate of 80% in fault diagnosis. The results showed that technology fusion on the basis of fault tree and expert system can effectively realize intelligent fault diagnosis of multi-parameter monitors and provide troubleshooting suggestions, which can not only provide experience accumulation for fault diagnosis of multi-parameter monitors, but also provide a new idea and technical support for fault diagnosis of medical equipment.

Dash4000 monitor failure reconditioning method based on fault tree theory / 医疗卫生装备

Objective To propose a monitor failure diagnosis method based on fault tree theory to decrease maintenance cost and increase efficiency.MethodsBased on fault tree theory and maintenance practices,a typical fault tree analytical model was established on likely faults and possible causes.The model developed was applied to the quantitative analyses of kinds of probability events to determine the causes for the faults.Results The study on some kind of faults proved the accuracy,accessibility and practicability,which facilitated the maintainer to eliminate the fault.Conclusion The method determins the cause and probability of the fault directly,and contributes to rapid and convenient maintenance of the monitor.

Application of fault tree analysis in innovation to electrical system of SL-IE radiotherapy simulator / 医疗卫生装备

Objective To discuss the practicability of application of fault tree analysis in innovation to electrical system of SL-IE radiotherapy simulator.Methods The structure and principle of the electrical system were analyzed,the fault tree for the electrical system was built,and the qualitative analysis and quantitative analysis to the fault tree were made.The electrical system was innovated with effective redundant method,and the qualitative analysis and quantitative analysis were made after innovation.Theoretical analysis and the actual validation were made for the fault tree of electrical system after innovation.Finally,several notes were provided for the innovation to the similar medical equipments.Results The fault tree analysis method was applied to innovating the electrical system,and theoretical analysis indicated that the failure probability to total system reduced obviously.Actually,the actual effect after innovation also validated the correctness of the theoretical analysis.Conclusion Application of fault tree analysis in innovation to electrical system of SL-IE radiotherapy simulator is practical.But,the selection to the innovation event,the change to maintainence after innovation and the event to innovate carefully should be paid attention to.

Analysis of Two Electrocution Accidents in Greece that Occurred due to Unexpected Re-energization of Power Lines

Investigation and analysis of accidents are critical elements of safety management. The over-riding purpose of an organization in carrying out an accident investigation is to prevent similar accidents, as well as seek a general improvement in the management of health and safety. Hundreds of workers have suffered injuries while installing, maintaining, or servicing machinery and equipment due to sudden re-energization of power lines. This study presents and analyzes two electrical accidents (1 fatal injury and 1 serious injury) that occurred because the power supply was reconnected inadvertently or by mistake.

Design and implementation of an expert system for remote fault diagnosis in ship lift / 西安交通大学学报·英文版

In this paper an expert system for remote fault diagnosis in the ship lift was developed by analysis of the fault tree and combination with VPN. The fault tree was constructed based on the operation condition of the ship lift. The diagnosis model was constructed by hierarchical classification of the fault tree structure, and the inference mechanism was given. Logical structure of the fault diagnosis in the ship lift was proposed. The implementation of the expert system for remote fault diagnosis in the ship lift was discussed, and the expert system developed was realized on the VPN virtual network. The system was applied to the Gaobaozhou ship lift project, and it ran successfully.

Design and implementation of an expert system for remote fault diagnosis in ship lift / 药物分析学报

In this paper an expert system for remote fault diagnosis in the ship lift was developed by analysis of the fault tree and combination with VPN. The fault tree was constructed based on the operation condition of the ship lift. The diagnosis model was constructed by hierarchical classification of the fault tree structure, and the inference mechanism was given. Logical structure of the fault diagnosis in the ship lift was proposed. The implementation of the expert system for remote fault diagnosis in the ship lift was discussed, and the expert system developed was realized on the VPN virtual network. The system was applied to the Gaobaozhou ship lift project, and it ran successfully.