Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 29
Filtrar
1.
J. oral res. (Impresa) ; 11(3): 1-11, jun. 30, 2022. ilus
Artículo en Inglés | LILACS | ID: biblio-1427951

RESUMEN

Objetive: To evaluate microleakage of composite resins (CR) placed over different cavitary liners after managing deep caries lesions through selective removal of soft carious tissue to soft dentin (SRCT-S). Material and Methods: Fifty four human teeth were collected for microleakage testing. Each assay comprised ICDAS 5 or ICDAS 6 carious lesions and sound teeth for controls. Sound teeth were prepared with cavities that mirrored the carious teeth cavities, which were prepared with SRCT-S. Sound and carious teeth were further randomly assigned to one of the three experimental groups: Group A: universal adhesive (UA) + CR, Group B: glass ionomer cement liner + UA + CR, and Group C: calcium hydroxide + UA+ CR. Occlusal microleakage (OM) and cervical microleakage (CM) was classified within one of 5 depth categories. ANOVA and Chi-square tests were computed (p<0.05). Results: OM and CM were similarly distributed across subgroups (p>0.05). All Group C samples with carious lesions presented some degree of microleakage. However, no statistically significant differences were observed between groups and within each group (p>0.05). Conclusion: Teeth restored with CR after SRCT-S using calcium hydroxide as a liner material seem to exhibit higher microleakage than those restored using glass ionomer or UA alone. Further clinical research is needed to deepen these findings. Clinical significance: The application of calcium hydroxide as a liner under a composite resin may reduce the longevity of a restoration after performing selective or partial removal of carious tissues. Clinicians should rethink the need of using calcium hydroxide for this application, albeit the lack of clinical evidence.


Objetivo: Evaluar la microfiltración de resinas compuestas (RC) colocadas sobre diferentes liners cavitarios después del manejo de lesiones de caries profundas mediante la remoción selectiva de tejido cariado blando hasta dentina blanda (SRCT-S). Material y Métodos: Se recolectaron 54 dientes humanos para pruebas de microfiltración. Cada ensayo comprendía lesiones cariosas ICDAS 5 o ICDAS 6 y dientes sanos para los controles. Se prepararon dientes sanos con cavidades que reflejaban las cavidades de los dientes cariados, que se prepararon con SRCT-S. Los dientes sanos y cariados se asignaron al azar a uno de los tres grupos experimentales: Grupo A: adhesivo universal (AU) + RC, Grupo B: revestimiento de cemento de ionómero de vidrio + AU + RC, y Grupo C: hidróxido de calcio + AU+ RC. La microfiltración oclusal (MO) y la microfiltración cervical (MC) se clasificaron dentro de una de las 5 categorías de profundidad. Se calcularon las pruebas ANOVA y Chi-cuadrado (p<0,05). Resultados: La MO y MC se distribuyeron de manera similar en los subgrupos (p> 0,05). Todas las muestras del Grupo C con lesiones cariosas presentaron algún grado de microfiltración. Sin embargo, no se observaron diferencias estadísticamente significativas entre grupos y dentro de cada grupo (p>0,05). Conclusión: Los dientes restaurados con RC después de SRCT-S usando hidróxido de calcio como material de revestimiento parecen exhibir una mayor microfiltración que aquellos restaurados usando ionómero de vidrio o AU solo. Se necesita más investigación clínica para profundizar estos hallazgos. Relevancia clínica: la aplicación de hidróxido de calcio como revestimiento debajo de una resina compuesta puede reducir la longevidad de una restauración después de realizar la eliminación selectiva o parcial de los tejidos cariados. Los médicos deberían reconsiderar la necesidad de usar hidróxido de calcio para esta aplicación, aunque no haya evidencia clínica.


Asunto(s)
Humanos , Resinas Compuestas/química , Recubrimiento de la Cavidad Dental , Filtración Dental/clasificación , Cementos de Ionómero Vítreo/química , Hidróxido de Calcio , Cementos de Resina/química , Caries Dental/terapia
2.
RFO UPF ; 26(1): 106-112, 20210327. ilus
Artículo en Portugués | LILACS, BBO | ID: biblio-1435377

RESUMEN

Objetivo: este artigo se propõe a discutir o tratamento de lesões profundas de cárie em molares permanentes, através da técnica de remoção seletiva de tecido cariado e restauração de resina composta, em dois casos clínicos, utilizando apenas sistema adesivo (caso 1) ou proteção pulpar indireta com cimento de hidróxido de cálcio (caso 2). Relato de casos: os indivíduos foram diagnosticados com dentes apresentando lesões profundas de cárie, isto é, com mais de 50% em profundidade da dentina, confirmada pelo exame radiográfico interproximal. O conjunto de resultados de testes de sensibilidade pulpar positivo ao frio e teste de percussão horizontal e vertical negativos, juntamente com a ausência de dor espontânea e normalidade do periápice (radiografia periapical), completaram os requisitos exigidos para execução da técnica de remoção seletiva de dentina cariada amolecida. Os dentes receberam restaurações adesivas na mesma sessão, sobre a dentina cariada amolecida da parede pulpar que havia recebido forramento de cimento de hidróxido de cálcio ou não, dependentes de uma randomização. Ambos os casos apresentados mostraram sucesso clínico em acompanhamento de 18 meses, tanto na manutenção da vitalidade pulpar quanto na sobrevivência da restauração. Considerações finais: com base nos casos apresentados, sabendo das limitações deste modelo de estudo, e em concordância com a literatura, a remoção seletiva de tecido cariado pode ser executada com sucesso no tratamento de lesões profundas de cárie, respeitando-se todos os passos da técnica, e parece não haver necessidade de uso de proteção pulpar indireta.(AU)


Objective: this article aims to discuss the treatment of deep caries lesions in permanent molars through the selective caries tissue removal technique and composite resin restoration of two clinical cases, using only an adhesive system (case 1) or an indirect pulp protection of calcium hydroxide cement (case 2). Cases report: the participants were diagnosed with deep caries lesions, that is, more than 50% in depth of the dentin involved, which was confirmed by the interproximal radiography. In both cases, it was obtained positive response to cold test, negative response to horizontal and vertical percussion tests, absence of spontaneous pain and no periapical lesion (periapical radiography), which completed the requirements for performing the selective caries removal of soft dentin. These teeth received adhesive restorations in the same session, under the softened carious dentin of the pulp wall that had received calcium hydroxide cement or not, depending on randomization. Both cases had clinical success in the 18-month follow- -up, showing pulp vitality and restoration survival. Final considerations: based on the clinical cases reported, considering de limitations of this study model, and in agreement with the literature, the selective removal of carious tissue can be successfully performed in the treatment of deep carious lesions, respecting all the steps of the technique and indirect pulp protection seems to be unnecessary.(AU)


Asunto(s)
Humanos , Femenino , Adolescente , Adulto , Caries Dental/terapia , Preparación de la Cavidad Dental/métodos , Pulpa Dental , Restauración Dental Permanente/métodos , Hidróxido de Calcio/uso terapéutico , Resultado del Tratamiento , Resinas Compuestas/uso terapéutico
3.
Rev. odontol. UNESP (Online) ; 47(4): 205-209, jul.-ago. 2018. tab
Artículo en Inglés | LILACS, BBO | ID: biblio-961531

RESUMEN

Introduction: Cavity liners based calcium hydroxide present low strength and high solubility that is consider a disadvantage. In order to enhance these properties it was developed a light-cured cavity liner based calcium hydroxide containing resin. Objective: The purpose of this study was to evaluate the pH and calcium release of light-cured cavity liners. Material and method: There were prepared specimens (n=10) with the Ultra-Blend ® plus, Biocal® (light cured cements) and Hydro C® (control). The samples were stored in 10 mL of distilled water and maintained at 37 °C. After 24 hours, 7, and 14 days, there were analyzed pH and the release of calcium levels. The data were statistically analyzed by ANOVA and Tukey test (α = 0.05). Result: The results of pH showed Hydro C > Ultra-Blend plus > Biocal. Biocal presented worst calcium release. Conclusion: Light-cured materials present lower calcium release and alteration in pH values.


Introdução: Forradores cavitários à base de hidróxido de cálcio apresentam baixa resistência e alta solubilidade. Para resolver este problema, foi desenvolvido forradores à base de hidróxido de cálcio fotoativáveis contendo resina para melhorar suas propridades. Objetivo: A proposta deste estudo foi avaliar a alteração de pH e liberação de cálcio de forradores fotoativáveis. Material e método: Foram preparadas amostras (n=10) com Ultra-Blend® plus, Biocal ® (cimentos fotoativáveis) e Hydro C® (controle). As amostras foram armazenadas com 10 mL de água destilada e mantidas em estufa à 37 °C. Depois de 24 horas, 7 e 14 dias, foram avaliados os níveis de liberação de cálcio e a alteração de pH. Os dados foram analisados estatisticamente pelo teste ANOVA, seguido do pós teste Tukey (α = 0.05). Resultado: Os resultados de pH mostraram Hydro C > Ultra-Blend plus > Biocal. Biocal apresentou a pior liberação de cálcio. Conclusão: Materiais fotoativados apresentam menor liberação de cálcio e alteração nos valores de pH.


Asunto(s)
Hidróxido de Calcio , Análisis de Varianza , Recubrimiento de la Cavidad Dental , Concentración de Iones de Hidrógeno
4.
Rev. otorrinolaringol. cir. cabeza cuello ; 77(3): 267-274, set. 2017. ilus
Artículo en Español | LILACS | ID: biblio-902775

RESUMEN

Introducción: Ante la presencia de un defecto anatómico nasal, se hace necesario considerar alternativas para restituir una correcta función y estética nasal. La estructura osteocartilaginosa nasal debe contar con un soporte o revestimiento interno que aporte una vascularización necesaria. Existen diversas técnicas de colgajos intranasales para lograr reconstituir el revestimiento interno nasal. Objetivos: Describir la técnica quirúrgica de los principales colgajos de revestimiento interno en reconstrucción nasal y su aplicación en modelos ex vivo. Material y método: Se realizó la disección de 7 especímenes de donante cadáver. Se efectuó una resección amplia nasal simulando una pérdida de tejido de las 3 capas de la anatomía nasal para su posterior reconstrucción. Resultados: Se logró replicar las distintas alternativas de técnicas de colgajos intranasales descritas para reconstrucción nasal. Conclusión: El revestimiento interno es de suma importancia en la reconstrucción nasal. Esta es una primera fase en el desarrollo y aprendizaje de la reconstrucción nasal.


Introduction: In the presence of a nasal anatomical defect, it is necessary to consider alternatives to restore a correct function and esthetic nasal result. The nasal osteocartilaginous structure must have an internal support or lining that provides a necessary vascularization. There are various techniques of intranasal flaps to achieve reconstitution of the nasal internal lining. Aim: To describe the surgical technique of the main internal lining flaps in nasal reconstruction and its application in ex vivo models. Material and method: We dissected 7 cadaver donor specimens. A broad nasal resection was performed simulating a loss of tissue from the three layers of the nasal anatomy for subsequent reconstruction. Results: It was possible to replicate the different alternatives of intranasal flap techniques described for nasal reconstruction. Conclusion: The inner lining is of paramount importance in nasal reconstruction. This is a first phase in the development and learning of nasal reconstruction.


Asunto(s)
Humanos , Rinoplastia/métodos , Colgajos Quirúrgicos , Nariz/anomalías , Nariz/cirugía , Cadáver
5.
Herald of Medicine ; (12): 920-924, 2016.
Artículo en Chino | WPRIM | ID: wpr-495943

RESUMEN

Objective To investigate the effect of triptolide (TP) on proliferation and apoptosis of cyst-lining epithelial cells with autosomal dominant polycystic kidney disease ( ADPKD). Methods Primary cultured cyst-lining epithelial cells were treated with TP at different concentrations for 12 h,24 h,48 h and 72 h, respectively.The proliferation activity of the cells was evaluated by Brdu assay. The cell cycle distribution was determined by flow cytometry. The apoptotic and apoptotic ratio were determined by FITC-AnnexinV binding/ PI. The morphological changes of cyst-lining epithelial cells were observed under transmission electron microscope. Results TP significantly inhibited the proliferation of cyst-lining epithelial cells and induced apoptosis in a dose- (10-40 ng?mL-1 )and time-dependent(12-48 h) manner. Typical ultrastructural changes of apoptotic cells were observed under electron microscope. Conclusion TP significantly inhibited the proliferation of cyst-lining epithelial cells and induced the apoptosis of cyst-lining epithelial cells, thus inhibited cyst forming and delayed cyst developing. The mechanism may involve several targets and pathways.

6.
Braz. j. microbiol ; 46(1): 41-48, 05/2015. tab, graf
Artículo en Inglés | LILACS | ID: lil-748261

RESUMEN

In this study, the characterization and the antimicrobial properties of nano silver (nAg) coating on leather were investigated. For this purpose, turbidity, viscosity and pH of nAg solutions prepared by the sol-gel method were measured. The formation of films from these solutions was characterized according to temperature by Differential Thermal Analysis-Thermogravimetry (DTA-TG) equipment. The surface morphology of treated leathers was observed using Scanning Electron Microscopy (SEM). The antimicrobial performance of nAg coatings on leather materials to the test microorganisms as Escherichia coli, Staphylococcus aureus, Candida albicans and Aspergillius niger was evaluated by the application of qualitative (Agar overlay method) and quantitative (percentage of microbial reduction) tests. According to qualitative test results it was found that 20 μg/cm2 and higher concentrations of nAg on the leather samples were effective against all microorganisms tested. Moreover, quantitative test results showed that leather samples treated with 20 μg/cm2 of nAg demonstrated the highest antibacterial activity against E. coli with 99.25% bacterium removal, whereas a 10 μg/cm2 concentration of nAg on leather was enough to exhibit the excellent percentage reduction against S. aureus of 99.91%. The results are promising for the use of colloidal nano silver solution on lining leather as antimicrobial coating.


Asunto(s)
Antiinfecciosos/farmacología , Bacterias/efectos de los fármacos , Hongos/efectos de los fármacos , Nanoestructuras , Plata/farmacología , Carga Bacteriana , Fenómenos Químicos , Concentración de Iones de Hidrógeno , Microscopía Electrónica de Rastreo , Propiedades de Superficie
7.
Infection and Chemotherapy ; : 219-225, 2014.
Artículo en Inglés | WPRIM | ID: wpr-116977

RESUMEN

Although antibiotics whose epithelial lining fluid (ELF) concentrations are reported high tend to be preferred in treatment of pneumonia, measurement of ELF concentrations of antibiotics could be misled by contamination from lysis of ELF cells and technical errors of bronchoalveolar lavage (BAL). In this review, ELF concentrations of anti-methicillin resistant Staphylococcus aureus (MRSA) antibiotics were interpreted considering above confounding factors. An equation used to explain antibiotic diffusion into CSF (cerebrospinal fluid) was adopted: ELF/free serum concentration ratio = 0.96 + 0.091 x ln (partition coefficient / molecular weight1/2). Seven anti-MRSA antibiotics with reported ELF concentrations were fitted to this equation to see if their ELF concentrations were explainable by the penetration capacity only. Then, outliers were modeled under the assumption of varying contamination from lysed ELF cells (test range 0-10% of ELF volume). ELF concentrations of oritavancin, telavancin, tigecycline, and vancomycin were well described by the diffusion equation, with or without additional impact from cell lysis. For modestly high ELF/free serum concentration ratio of linezolid, technical errors of BAL should be excluded. Although teicoplanin and iclaprim showed high ELF/free serum ratios also, their protein binding levels need to be cleared for proper interpretation. At the moment, it appears very premature to use ELF concentrations of anti-MRSA antibiotics as a relevant guide for treatment of lung infections by MRSA.


Asunto(s)
Antibacterianos , Lavado Broncoalveolar , Difusión , Linezolid , Pulmón , Resistencia a la Meticilina , Staphylococcus aureus Resistente a Meticilina , Neumonía , Unión Proteica , Staphylococcus aureus , Teicoplanina , Vancomicina
8.
Chinese Journal of Nephrology ; (12): 464-468, 2012.
Artículo en Chino | WPRIM | ID: wpr-429102

RESUMEN

Objective To investigate the effects of a novel PPARγ agonist DH9 on Wntβ-catenin pathway in human polycystic kidney cystic-lining epithelial cells (WT9-12).Methods WT9-12 cells were treated with different concentrations of DH9 for 72 hours and the proliferation was assessed by MTT.WT9-12 cells were pretreated with SB216763 or GW9662 for two hours and then treated with DH9 for 72 hours.Western blotting was applied to detect the protein expression of β-catenin,phospho-β-catenin,GSK3β,phospho-GSK3β.Results DH9 could effectively inhibit the proliferation of the cells.60 μmol/L DH9 could facilitate β-catenin down-regulation (P<0.01) and phospho-β-catenin up-regulation (P<0.01).Inhibition of GSK3β by SB216763 could protect WT9-12 cells against DH9-facilitated β-catenin repression in a dose-dependent manner despite phosphorylating deactivation,but PPARγ inhibitor GW9662 couldn't.Conclusions DH9can effectively block the proliferation of WT9-12 cells.The effect may be mediated by facilitating the down-regulation of β-catenin via GSK3β-dependent mechanism.

9.
Artículo en Inglés | IMSEAR | ID: sea-174233

RESUMEN

Aim of this study was to compare class II composite restoration using flowable composites as lining with various thickness and curing techniques by evaluating internal voids. Fifty intact molars, each prepared with two box-only class II cavities, were randomly divided into five groups: Group I, P 60 filling alone; Group II, ultra thin flowable composite lining (0.5-1mm) co-cured with overlying composite; Group III, thin lining (1-1.5) co-cured with overlying composite; Group IV, ultra thin lining (0.5-1mm) precured and Group V, thin lining (1-1.5) precured. Internal voids were recorded in the gingival interface, cervical and occlusal halves of restorations. Precured techniques for flowable composite lining showed the least number of interface and cervical voids where as the co-cured technique of flowable and packable composites showed the least number of occlusal voids

10.
Odonto (Säo Bernardo do Campo) ; 19(37): 25-32, jan.-jun.2011. ilus
Artículo en Inglés | LILACS | ID: lil-789947

RESUMEN

The keratocystic odontogenic tumor (KOT) is a relatively common oral and maxillofacial lesion that arises from rests of dental lamina. It has an agressive behavior including high rates of recurrence, rapid growth, and extension into adjacent tissues. Various treatment modalities, and thus differing recurrence rates after treatment, have been reported. Due to the very thin and friable lining, characteristic of the tumor, enucleation can be difficult undertaking and, for this reason it is associated with the highest recurrence rates.Aim: we describe a case of a large KOT in the mandibular body, where due to the presence of an unusual thick lining, removal of the tumor as a single piece was sucessful.Conclusion: this case shows that large KOT can be treated in a conservative approach. Due to the possible recurrences many years after initial treatment, a life-long follow-up schedule is mandatory...


O tumor odontogênico ceratocístico (TOC) é uma lesão oral e maxilofacial relativamente comum que surge de restos da lâmina dental. Ele tem um comportamento agressivo, incluindo altas taxas de recorrência, crescimento rápido e extensão para os tecidos adjacentes. Várias modalidades de tratamento e, assim, diferentes taxas de recorrência após o tratamento, foram relatadas. Devido ao revestimento muito fino e friável, característica do tumor, a enucleação pode ser difícil e, por esta razão ele é associado com as maiores taxas de recorrência. Objetivo: o presente trabalho descreve um caso de um grande TOC no corpo mandibular, onde, devido à presença de um revestimento de espessura incomum, a remoção do tumor como uma peça única foi bem sucedida. Conclusão: o presente caso demonstra que TOC de grandes proporções podem ser tratados de maneira conservadora. Devido à possibilidade de recidiva em muitos anos após o tratamento inicial, acompanhamento a longo prazo é obrigatório...


Asunto(s)
Humanos , Masculino , Persona de Mediana Edad , Quistes Odontogénicos/cirugía , Quistes Odontogénicos/patología , Enfermedades Mandibulares/cirugía , Enfermedades Mandibulares/patología , Quistes Odontogénicos , Enfermedades Mandibulares , Radiografía Panorámica , Resultado del Tratamiento
11.
Artículo en Inglés | IMSEAR | ID: sea-174145

RESUMEN

Odontomas and dentigerous cysts are the common findings in the daily practice of dental professionals. However, simultaneous pathologies of odontome and dentigerous cyst are uncommon and diagnosis based on the radiographic appearance of such lesions is a challenge to overcome. They together are potential for complications like attaining large size, root resorption, destruction of jaw bones and some shows neoplastic changes like ameloblastoma. The potential complications justify histopathological evaluation and enucleation of all the odontomes. This paper is to describe a rare case of complex odontome with dentigerous lining in the anterior maxilla.

12.
J. appl. oral sci ; 18(4): 372-378, July-Aug. 2010. graf, tab
Artículo en Inglés | LILACS | ID: lil-557107

RESUMEN

OBJECTIVES: To evaluate the color stability and hardness of two denture liners obtained by direct and indirect techniques, after thermal cycling and immersion in beverages that can cause staining of teeth. MATERIAL AND METHODS: Seventy disc-shaped specimens (18 x 3 mm) processed by direct (DT) and indirect techniques (IT) were made from Elite soft (n=35) and Kooliner (n=35) denture liners. For each material and technique, 10 specimens were subjected to thermal cycling (3,000 cycles) and 25 specimens were stored in water, coffee, tea, soda and red wine for 36 days. The values of color change, Shore A hardness (Elite soft) and Knoop hardness (Kooliner) were obtained. The data were subjected to ANOVA, Tukey's multiple-comparison test, and Kruskal-Wallis test (P<0.05). RESULTS: The thermal cycling promoted a decrease on hardness of Kooliner regardless of the technique used (Initial: 9.09± 1.61; Thermal cycling: 7.77± 1.47) and promoted an increase in the hardness in the DT for Elite Soft (Initial: 40.63± 1.07; Thermal cycling: 43.53± 1.03); hardness of Kooliner (DT: 8.76± 0.95; IT: 7.70± 1.62) and Elite Soft (DT: 42.75± 1.54; IT=39.30± 2.31) from the DT suffered an increase after the immersion in the beverages. The thermal cycling promoted color change only for Kooliner in the IT. Immersion in the beverages did not promote color change for Elite in both techniques. The control group of the DT of Kooliner showed a significant color change. Wine and coffee produced the greatest color change in the DT only for Elite Soft when compared to the other beverages. CONCLUSION: The three variation factors promoted alteration on hardness and color of the tested denture lining materials.


Asunto(s)
Humanos , Bebidas , Alineadores Dentales , Materiales Dentales/química , Resinas Acrílicas/química , Bebidas Gaseosas , Color , Colorimetría , Café/química , Dureza , Inmersión , Ensayo de Materiales , Polimerizacion , Polimetil Metacrilato/química , Espectrofotometría , Propiedades de Superficie , Elastómeros de Silicona/química , Temperatura , Factores de Tiempo , Té/química , Vino , Agua/química
13.
Academic Journal of Second Military Medical University ; (12): 921-924, 2010.
Artículo en Chino | WPRIM | ID: wpr-840785

RESUMEN

Objective: To investigate the effect of mycophenolate mofetil(MMF)on proliferation and apoptosis of cyst-lining epithelial cells in patients with autosomal dominant polycystic kidney disease (ADPKD), and to compare its effect with that of rapamycin (RAPA) in vitro. Methods: Primary cultured cyst-lining epithelial cells were treated with MMF and RAPA at different concentrations(0, 0.005, 0.05, 0.5, 5 μg/ml)for 48 h or 72 h. The inhibitory effects of them on the cells were evaluated by MTT assay; the cell cycle distribution and apoptotic ratio were determined by flow cytometry. The morphological changes of cyst-lining epithelial cells were observed under transmission electron microscope. Results: Both MMF and RAPA significantly inhibited the proliferation of cyst-lining epithelial cells in a dose- and time dependent manner. After 48 h treatment, the cells were blocked at S phase by MMF and at G0/G1 phase by RAPA. Both drugs induced cell apoptosis, with the maximal apoptotic rate being (5.53 ± 0.27)% for MMF and (4.36 ± 0.10)% for PAPA. Typical morphological changes of apoptotic cells were observed under electron microscope. Conclusion: MMF can effectively inhibit proliferation and induce apoptosis of cyst-lining epithelial cells, but its inhibitory effect is weaker than that of RAPA.

14.
Chinese Journal of Medical Aesthetics and Cosmetology ; (6): 25-27, 2009.
Artículo en Chino | WPRIM | ID: wpr-381265

RESUMEN

Objective To investigate the plastic surgery of facial soft tissue for improvement of facial contour. Methods Botulinum toxin type A was injected into hypertrophied masseter to make it atrophy and attenuation; meanwhile, buccal fat lining was partly resected by intra-oral approach. Buc-cal liposuction was performed if necessary. Results 36 cases got satisfactory face thinning results af-ter treatment. The facial contour of all patients was markedly improved. Following up for 6 - 12 months showed that the effect was stable. Conclusion Plastic repair of facial soft tissue for improve-ment of facial contour is a simple approach, with mild injury, quick recovery, safe and effective.

15.
Rev. odonto ciênc ; 23(3): 215-219, jul.-set. 2008. graf, tab
Artículo en Inglés | LILACS, BBO | ID: lil-494938

RESUMEN

Purpose: To evaluate residual monomer release from resilient denture lining materials polymerized by different methods. Methods: Two materials were assessed: Ever-Soft polymerized by hot water bath or microwave energy, and Light Liner polymerized by chemical reaction and visible light (dual polymerization). Residual monomer release was measured in 12 specimens (40x10x0.3mm) made of each material and polymerization method. The specimens were stored in distilled water for 168 hours at 37ºC, and analyzed daily by ultraviolet spectrometry (Light Liner: 204nm, Ever-Soft: 206nm). Data were analyzed by one-way ANOVA and Bonferroni test (α=0.05). The residual monomer released as a function of time was determined by polynomial regression analysis. Results: Residual monomer amount released at 168 hours from specimens polymerized by hot water bath (0.27±0.01μg/cm²) was significantly greater (P < 0.05) than from those processed by microwave energy (0.25±0.02μg/cm²). Ever-Soft showed decrease in monomer release over time, tending to stabilize at 96 hours. Light Liner continued to release monomer over time. Conclusion: Ever-Soft may be polymerized by microwave energy. Residual monomer release values were low, and the monomer levels decreased over time.


Objetivo: Avaliar o monômero residual liberado de materiais resilientes para reembasamento polimerizados por diferentes métodos. Metodologia: Dois materiais foram testados: Ever-Soft polymerizado por banho quente de água ou por energia de microondas, e Light Liner polimerizado quimicamente e por luz visível (polimerização dual). O monômero residual liberado foi mensurado em 12 espécimes (40x10x0,3mm) fabricados com cada material e método de polimerização. Os espécimes foram armazenados em água destilada por 168 horas a 37ºC, e analisados diariamente por espectrometria ultravioleta (Light Liner: 204nm, Ever-Soft: 206nm). Os dados foram analisados por ANOVA de fator único e teste de Bonferroni (α=0,05). O monômero residual liberado em relação ao tempo foi determinado por análise de regressão polinomial. Resultados: O monômero residual liberado em 168 horas do teste (μg/cm²) em espécimes polimerizados por banho de água quente (0,27±0,01μg/cm²) foi significativamente maior (P < 0,05) que em espécimes processados por energia de microondas (0,25±0,02μg/cm²). Ever-Soft mostrou uma redução na liberação de monomer residual com o tempo, tendendo a se estabilizar em 96 horas. Light Liner continuou a liberar monômero com o tempo. Conclusão: Ever-Soft pode ser polimerizado por energia de microondas. Os valores de monômero residual liberado foram baixos, e os níveis de monômero diminuíram com o tempo.


Asunto(s)
Microondas , Técnicas In Vitro , Alineadores Dentales , Materiales Dentales
16.
RGO (Porto Alegre) ; 56(2): 175-180, abr.-jun. 2008.
Artículo en Portugués | LILACS, BBO | ID: lil-487232

RESUMEN

A odontologia se renova a cada dia mediante os resultados de pesquisas qualificadas. A abordagem quanto à remoção da dentina cariada está passando por questionamentos e inovações. O escopo desse trabalho foi realizar uma revisão literária no sentido de elucidar questões pertinentes à problemática da necessidade ou não de remover completamente a dentina cariada e da possibilidade de restaurar em sessão única, além de discutir a respeito de qual material deve ser aplicado nesse tipo de substrato. Após a análise dos artigos referenciados, concluiu-se que o tratamento expectante controla a progressão da cárie, há uma tendência na literatura de remover a dentina cariada parcialmente em lesões profundas e restaurar de forma definitiva. O cimento de hidróxido de cálcio é um forrador clássico nessas situações, enquanto o cimento de ionômero de vidro e os materiais resinosos representam outras possibilidades de materiais que podem estar em íntimo contato com a dentina remanescente.


Dentistry is renewed day after day through the results of qualified researches. The approach as regards carious dentin removal is going through questioning and innovation. The scope of this study was to perform a literature review in the sense of elucidating questions pertaining to the problem of whether or not it is necessary to completely remove carious dentin, and the possibility of performing restoration in a single session, in addition to a discussion about which type of material should be applied in this type of substrate. After analyzing the referenced articles, it was concluded that the stepwise treatment controls caries progression; there is a trend in the literature to partially remove the carious dentin in deep lesions and perform definitive restoration; Calcium hydroxide cement is a classical liner in these situations, while glass ionomer cement and resinous materials are other possibilities of materials that can be in close contact with the remaining dentin.


Asunto(s)
Caries Dental/terapia , Recubrimiento de la Cavidad Dental , Preparación de la Cavidad Dental , Dentina
17.
Arq. bras. med. vet. zootec ; 59(4): 1014-1020, ago. 2007. graf, tab
Artículo en Portugués | LILACS | ID: lil-462201

RESUMEN

O experimento foi realizado em delineamento inteiramente ao acaso, em esquema fatorial 2x2, para avaliar o efeito de época de ano, o tipo de forro de polietileno sobre as condições térmicas, de umidade e o desempenho de aves de corte. Foram utilizados quatro aviários, cada um dividido internamente em quatro boxes para alojar 200 aves cada. As variáveis de desempenho avaliadas foram peso vivo, ganho de peso, consumo de ração, conversão alimentar e mortalidade das aves do nascimento ao 42º dia de idade. O desempenho das aves foi melhor com aviários com forro. As condições térmicas foram melhoradas cm a utilização de forro nos aviários


This experiment was carried out in a completely randomized experimental design, factorial arrangement 2x2, to evaluate the effect of period of year and type polyethylene liming on thermal and humidity of aviaries and performance of broiler. Four aviaries were divided in four boxes to house 200 chickens each. The recorded performance traits were body weight, weight gain feed intake, feed:weght gain ratio and mortality from hatch to 42 days of age. Better thermal conditions and higher chicken performance were observed in the polyethylene liming aviaries


Asunto(s)
Animales , Aves de Corral/métodos , Ambiente Controlado , Pollos/crecimiento & desarrollo , Polietileno
18.
The Journal of Korean Academy of Prosthodontics ; : 466-476, 2006.
Artículo en Coreano | WPRIM | ID: wpr-84191

RESUMEN

Purpose: Colonization of denture soft lining materials by Candida albicans can result in clinical problem, and deterioration of the materials. This study aimed to compare the retention and penetration of C. albicans into four denture soft lining materials commonly used. Materials and methods: Four denture soft lining materials(Coe-comfort., Coe-soft., GC soft liner., and Tissue conditioner.) discs were prepared to glass slide and dental stone. Adherence of yeast to surfaces was monitored after one hour incubation of standardized washed cell suspension with test disc surfaces. Adherent cells stained with acridine orange were counted fluorescence microscopy. Penetration of yeast into materials bonded with acrylic resin after 1, 2, 3, 4, 5, 6 and 7 days incubation was observed through sections stained using acridine orange and estimated to quantitative analysis using radioisotope. Results: There was statistical significance in cell numbers between smooth and rough surfaces(p<0.05). Higher numbers of cells were observed on rough surfaces. There was statistical significance in adherent cell numbers into smooth and rough surfaces individually(p<0.05). According to the increase of incubation periods, the cells penetrated into denture soft lining materials were shown to increase. The differences among all kinds of soft liner were statistically significant(p<0.05),and the largest number of cells penetrated into soft liners was observed in the Coe-soft. Conclusion: Initial adherence and penetration of yeast into denture soft lining materials has been influenced by surface roughness and chemical composition of them. The selection of appropriate materials and their fabrication may promote clinical performance.


Asunto(s)
Naranja de Acridina , Candida albicans , Candida , Recuento de Células , Colon , Dentaduras , Vidrio , Microscopía Fluorescente , Estomatitis Subprotética , Levaduras
19.
Journal of Korean Academy of Conservative Dentistry ; : 363-371, 2005.
Artículo en Coreano | WPRIM | ID: wpr-182044

RESUMEN

This study investigated the effect of thickness of flowable resin lining on marginal leakage in class II composite restorations. 80 experimental teeth were prepared with class II preparations with enamel margin or dentin margin. Each group was devided into four groups according to flowable resin lining thickness ; Control group - no flowable resin lining, Group 1 - 0.5 mm flowable resin lining, Group 2 - 1 mm flowable resin lining, Group 3 - 2 mm flowable resin lining. The cavities were restored using Scotchbond Multi-Purpose adhesive system, Filtek Flow and Filtek Z 250 composite resin. Following one day storage in distilled water, the restored teeth were thermocycled for 500 cycles and immersed in 2% methylene blue for 24 hours. The results of this study were as follows: 1. Ranking of mean microleakage scores at the enamel margins was Group 1 < Control = Group 2 < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 and Group 2 (p < 0.05). 2. Ranking of mean microleakage scores at the dentin margins was Group 1 < Group 2 < Control < Group 3. The microleakage of Group 3 was significantly higher than that of Control, Group 1 (p < 0.05). 3. Compared with microleakage between the enamel and dentin margins, enamel margin group were significantly lower than dentin margin group.


Asunto(s)
Adhesivos , Esmalte Dental , Dentina , Azul de Metileno , Diente , Agua
20.
Chinese Journal of Nephrology ; (12)2005.
Artículo en Chino | WPRIM | ID: wpr-679496

RESUMEN

Objective To initially investigate the mechanism of COX-2 inhibitor inducing cell apoptosis through the observation of celecoxib (CXB),a specific COX-2 inhibitor,inducing apoptosis of cyst lining epithelial cells of human polycystic kidney.Methods (1)Primarily cultured cell was divided into control group and CXB group to evaluate the proliferative state by Brdu assay.(2)The cell apoptosis was observed by transmitted electronic microscope after being cultured in CXB 2?10~(-5) mol/L for 24,48 hours.(3)The cell apoptosis and apoptotic rate were detected by TUNEL assay.(4) The cell apoptotic rate were measured by AnnexinV,PI-labeled flow cytometry after being cultured in CXB 2?10~(-5) mol/L for 0,24,48 hours.(5)Protein expression of Bax,Bcl-2,caspase 3 was examined by Western blotting.Results (1)The Brdu assay revealed that CXB inhibited cell growth in a concentration-dependent manner,with the maximum growth inhibition ratio of 63.9% when treated by CXB 2?10~(-5) mol/L for 24 h.(2)Typical morphological changes of apoptotic cell were apoptotic body, nuclear concentration,chromatin aggregation,endochylema vacuolization and ravinement under eletrou microscope.(3)TUNEL assay showed that the apoptotic rate was (2.8?0.2)% in control group,and (28.5?1.6)%,(48.5?1.2)% in CXB group for 24,48 hours respectively,with significant differences to control group(P<0.05).(4) AnnexinV,PI-labeled flow cytometry showed that,in 0,0.5,1,2?10~(-5) mol/L CXB group,the apoptotic rates were (3.15?0.05)%,(7.15?0.11)%,(7.76?0.08)%, (12.15?0.07)% for 24 hours respectively,and (13.53?0.21)%,(18.36?0.17)%,(24.87?0.25)%, (53.66?0.32)% for 48 hours respectively.Significant differences were found among corresponding groups(all P<0.01 ).(5) Extracted total cell protein in every group and more protein of Bax,Bcl-2 expressed in CXB-treated group was detected by Western blotting than that in control group. Conclusions CXB can inhibit the proliferation of cyst liner epithelial cells in a time- and concentration- dependent manner,and induce cell apoptosis through increasing the ratio of Bax/Bcl-2.CXB is hopeful to become an effective drug to treat ADPKD.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA