Evaluación de la fuerza masticatoria máxima funcional en adultos jóvenes chilenos / Evaluation of functional maximum bite force in Chilean young adults

La fuerza masticatoria máxima funcional (FMMF) se ha definido como la máxima fuerza generada entre los dientes maxilares y mandibulares. Así el objetivo de esta investigación fue de obtener datos reales sobre las FMMF a nivel molar, premolar, canino e incisivo en individuos adultos jóvenes. El estudio incluyó una muestra de 50 individuos entre 18 y 25 años de edad, totalmente dentados y con perfil esqueletal tipo I y clase I molar y canino. Se utilizó como instrumento un dispositivo de medición de fuerzas portátil, realizando las medidas en la región molar, premolar, canina e incisiva. A los individuos se les indicó morder el instrumento con la mayor fuerza posible, alternando las diferentes zonas a medir, aplicándose tres mediciones en cada diente y registrando el mayor valor en cada zona. La media de las fuerzas ejercidas del sexo masculino fue de 698, 516, 322 y 220 N, en las regiones molar, premolar, canina e incisiva, respectivamente. Por otro lado, en el sexo femenino se observaron valores medios de 466, 431, 232 y 174 N en las regiones molar, premolar, canina e incisiva, respectivamente. Se puede concluir que se observaron diferencias significativas de FMMF entre ambos sexos en las diferentes regiones, identificando los mayores valores en los individuos de sexo masculino en la región molar. Además, se identificaron diferencias significativas de la FMMF sólo en la región canina del sexo masculino al relacionarlas con el lado del arco.

The Functional maximum bite force (FMMF) is defined as the maximum force generated between the maxillary and mandibular teeth. Therefore, the aim of this research was to obtain real data about the FMMF at a molar, premolar, canine and incisive level in young adult individuals. The study included a sample of 50 individuals between 18 and 25 years old, fully toothed with a skeletal type I and Class I molar and canine profile. The measuring instrument used was a portable force measuring device, making measurements in the molar, premolar, canine and incisive regions. Individuals were instructed to bite the instrument with the greatest possible force, alternating different areas to measure, applying three measurements on each tooth and recording the highest value in each zone. The average of the forces exerted by males was 698, 516, 322 and 220 N, in the molar regions, premolar, canine and incisor, respectively. Furthermore, in females average values of 466, 431, 232 and 174 N were observed in the molar, premolar, canine and incisor regions respectively. It can be concluded that significant differences were observed in the FMMF between the sexes in different regions, identifying the highest values in male subjects in the molar region. In addition,significant differences were identified in the FMMF of males only in the canine region when related to the side of the arch.

Fuerza máxima de mordida en pacientes adultos mayores de origen mapuche y no mapuche portadores de prótesis parciales removibles clase I Kennedy / Maximum bite force in elderly Mapuche and non-Mapuche patients with Kennedy class I removable partial dentures

OBJETIVO Comparar la fuerza máxima de mordida (FMM) de los pacientes adultos mayores portadores de prótesis parciales removibles con extremo libre bilateral (clase I Kennedy) maxilar y mandibular, en individuos mapuches y no mapuches durante 2 períodos diferentes de medición. PACIENTES Y MÉTODOS Se dividió a 40 sujetos cuyas edades fluctuaban entre 60 y 80 años en 2 grupos de acuerdo con su origen étnico para medir su FMM en la región de molares a través de un dispositivo hidráulico. Los sujetos fueron instruidos para realizar 3 mordidas por lado lo más fuerte posible y el valor más alto fue considerado como fuerza máxima. Los datos fueron analizados por medio del test t de Student y prueba de Levene. RESULTADOS El género masculino presentó mayores valores de FMM (p < 0,05). Además, el grupo de individuos de etnia mapuche presentó mayores valores de FMM (p < 0,05). Se identificaron valores de FMM considerablemente mayores en el período de un mes posterior a la inserción de la nueva prótesis (p < 0,05). CONCLUSIONESLos mayores valores de FMM fueron observados en la etnia mapuche, en individuos de género masculino y un mes posterior a la inserción de ambas prótesis.

OBJECTIVE To compare the maximum bite force (FMM), in two different measurement periods, of mapuche and non-mapuche elderly patients with both maxillary and mandibular Kennedy class I removable partial dentures. PATIENTS AND METHODS A total of 40 subjects with ages ranging between 60 and 80 years were divided into 2 groups according to their ethnic origins to measure FMM in the molar region using a hydraulic device. The subjects were instructed to perform three bites with each side as hard as possible, and the highest value was considered as the maximum force. Data were analyzed by Student's t- test and Levene test. RESULTS Male gender showed higher FMM values (p < 0.05). The group of mapuche individuals showed the highest values of FMM (p < 0.05). Finally, considerably higher FMM values were identified at one-month period subsequent to the insertion of the new prosthesis (p < 0.05). CONCLUSIONS The highest FMM values were observed in patients of mapuche ethnic origin, in male patients, and at one-month period after both prostheses were inserted.

A preliminary study to find out maximum occlusal bite force in Indian individuals.

Purpose: This preliminary hospital based study was designed to measure the mean maximum bite force (MMBF) in healthy Indian individuals. An attempt was made to correlate MMBF with body mass index (BMI) and some of the anthropometric features. Methodology: A total of 358 healthy subjects in the age range of 18-47 years (mean age = 26.66 ± 6.83) were selected following the selection criteria. Demographic details along with general physical and facial parameters such as height, weight, facial form, facial profile, arch form, and palatal contour were recorded in a predesigned proforma. The maximum bite force was recorded on both (right and left) sides using a specially designed piezoelectric transducer based device. Results: The MMBF in Indian individuals was found to be 372.39 ± 175.93 Newton (N). Males had significantly higher (P = 0.000) MMBF (448.47 ± 191.82 N) as compared to females (296.31 ± 116.79 N). Facial form (P = 0.001) and palatal contour (P = 0.000) showed a significant relationship with MMBF. Subjects having square facial form (421.34 ± 187.32 N) showed significantly higher MMBF as compared to other facial forms, that is, square tapered (358.86 ± 143.56 N; P = 0.038), ovoid (338.40 ± 163.02 N; P = 0.000) and tapered (349.22 ± 184.82 N; P = 0.028). Subjects with flat palatal contour showed significantly higher MMBF when compared to high (P = 0.002) and medium palatal (P = 0.002) contour. Though facial profile was not significantly related to MMBF, it was significantly higher in subjects having concave facial profile when compared to convex (P = 0.045) and straight (P = 0.039) facial profile. BMI and arch form showed no significant relationship with MMBF. Conclusion: The MMBF is found to be affected by gender and some of the anthropometric features like facial form and palatal contour.

Association between maximum bite force and craniofacial morphology in an Amazonian population with normal dental occlusion / Associação entre força máxima de mordida e morfologia craniofacial em população Amazonense com oclusão normal

The aim of this study was to determine the maximum bite force (MBF) in Amazonian children and young adolescents with normal dental occlusion, the average craniofacial morphology, and investigate associations between craniofacial morphology and body mass with MBF. Ninety-seven children and young adolescents, 21 with primary dentition and 76 with permanent dentition and normal dental occlusion were included in the study. Subjects were from Amazonian tribes studying at three schools in Leticia, Amazonas, Colombia. MBF was determined by means of a digital hydraulic pressure gauge. Body mass index (BMI), facial morphology index, and dental arches transverse dimensions were computed in each subject. Mann Whitney test, a one-tailed non-parametric statistical analysis, was used to contrast MBF between primary dentition and permanent dentition. The same statistical analysis was used to determine MBF statistical differences between the various facial morphologies. Pearson correlation statistical analysis was used to evaluate associations between MBF with BMI, dental arches transverse dimensions or facial morphology. Statistical significance was determined at 95 percent level of confidence. A significant difference was found for the MBF between subjects in primary dentition (incisors: 116.57 ± 48.30; right molars: 368.38 ± 105.52; left molars: 322.76 ± 83.77) and those in permanent dentition (incisors: 260.88 ± 85.73; right molars: 459.63 ± 167.11; left molars: 645.67 ± 170.60). In addition, an association was observed between MBF and facial morphology index. It was concluded that MBF significantly increases from primary to permanent dentition in subjects with normal dental occlusion. Furthermore, this study agrees with other reports stating that MBF is associated with the morphology of the face, but not with BMI or dental arches transverse dimensions.

O presente estudo teve como objetivo determinar a força máxima de mordida (FMM) e morfologia craniofacial média de crianças e adolescentes da região do Amazonas com oclusão dentária normal, e investigar associações entre índice de massa corpórea (IMC), morfologia craniofacial e FMM. Participaram do estudo 97 crianças e adolescentes, 21 deles com dentição primária e 76 com dentição permanente, todos com oclusão dentária normal. Os indivíduos pertencentes a tribos amazônicas estudavam em três escolas em Leticia, Amazonas e Colombia. A FMM foi determinada utilizando medidor de pressão hidráulica digital. Índice de massa corporal (IMC), índice morfológico, e dimensões transversais dos arcos dentários de cada indivíduo foram registrados. O teste de Mann Whitney, análise unicaudal não paramétrica, foi aplicado na comparação da força máxima de mordida em dentição decídua e permanente. A mesma análise estatística foi utilizada para determinar as diferenças estatísticas acerca da FMM entre as diferentes características da morfologia facial. O coeficiente de correlação de Pearson foi empregado para avaliar as associações entre FMM e IMC, dimensão transversal dos arcos dentários ou morfologia facial. A significância estatística foi determinada com intervalos de 95% de confiança. Diferença significativa foi observada para FMM entre sujeitos com dentição decídua (incisivos: 116.57 ± 48.30; molares direitos: 368.38 ± 105.52; molares esquerdos: 322.76 ± 83.77) e aqueles com dentição permanente (incisivos: 260.88 ± 85.73; molares direitos: 459.63 ± 167.11molares esquerdos: 645.67 ± 170.60).

A comparison of the masticatory function between two different types of implant supported prostheses and complete denture for fully edentulous patients / 대한치과보철학회지

STATEMENT OF PROBLEM: The improvement in oral function and comfort from the dental implant appears to depend on the particular type of implant support used with the denture. The number and positioning of implants have an influence on the force transfer and subsequent stress distribution around implants. Nevertheless, a quantitative comparison has not been made between the types of implant prosthesis used with different materials compared to conventional complete denture. PURPOSE: The objective of this study is to assess the masticatory performance, bite force and impact of two different type of implant supported prostheses on oral health-related quality of life compared to conventional complete denture with GOHAI, validated oral-specific health status measures, the sieving method, and the Prescale Dental System. MATERIAL AND METHODS: From the years 1999 to 2006, a total of 30 completely edentulous patients in a single arch were selected from the Yonsei University Dental Hospital, Department of Prosthodontics and Implant Clinic in Seoul, S. Korea. Patients were divided into 3 groups of 10 each. Group HR was restored with fixed-detachable hybrid prostheses with resin teeth. Group FP had fixed dentures with porcelain teeth while Group CD had a complete denture. The masticatory performance was compared between 3 groups. RESULTS: The results showed a significant improvement in oral health-related quality of life with dental implants compared to a conventional denture in GOHAI comparison. Overall, implant prostheses showed a higher masticatory performance (S50) and maximum bite force compared with conventional dentures (P .05). CONCLUSION: Within the limitation of this study, the numbers of implant and material of implant prostheses does not appear to impact patient satisfaction, masticatory performance or bite force.

Sinus augmentation with beta-TCP

Sinus floor augmentation has been proven an effective treatment procedure to increase bone volume in the posterior edentulous maxilla. Autogenous bone considered to be the best material for reconstructive bone surgery and has been successfully used as a graft material to augment posterior maxilla. However, the collection of autogenous bone required extra risks for morbidity and complaints. So, various bone graft materials included beta-tricalcium phosphate(beta-TCP) has been introduced for replacing the autogenous bone. The objective of this clinical study was to determine the predictability of endosseous implant placed in a maxillary sinus with beta-TCP grafting. We performed sinus elevation with beta-TCP to install the implant in the 10 maxillary cases. The prosthetic procedure was performed 6-9 months after. The implant-prosthetics was checked about 1 year. We checked the implant and measured the maximum bite force to evaluate the function of the implant. There was not observed the specific problem and complication in dental implant and maxillary sinus in the grafted materials. The maximum bite force was 558N in case of natural tooth, 365N in implant without grafting, 318N in implant with beta-TCP grafting. There was no significant difference between with and without sinus grafting on maximum bite force(P>0.05). As though the long term check-up is needed, the grafting of beta-TCP as a osteoconductive materials can expand the volume and induce dense new bone formation in maxillary sinus. So, this short-term results support that beta-TCP can be a suitable material for sinus augmentation.

Relationship between maximum bite force and facial skeletal pattern / 대한치과교정학회지

The purpose of this study was to measure maximum bite force and to investigate its relationship with anteroposterior, vertical, and transverse facial skeletal measurements. From among the dental students at the College of Dentistry, forty subjects (26 male and 14 female) were selected. With two sets of strain gauge, maximum bite force at the right and left first molars and anterior teeth was measured in the morning and afternoon. After taking lateral and posteroanterior cephalograms, fifty and nineteen variables were evaluated, respectively. Paired t-tests and an independent t-test were done and correlation coefficients were obtained. 1. The maximum bite force at the first molars was 68.0+/-13.9 kg in males and 55.6+/-10.5 kg in females (p0.05). 3. Significant difference was observed between the strong bite force group and the weak bite force group in some cephalometric and other measurements (p<0.05). N-S-Ar, S-Ar-Go, FH-H1, MPA and MMO showed a significant difference in posterior maximum bite force (P). N-S-Ar and FH-H1 also showed a significant difference in anterior maximum bite force (A). 4. Several cephalometric variables showed some correlation with maximum bite force (p<0.05). N-S-Ar, S-Ar-Go, UGA, FH-H6, FH-H1, body weight and MMO were significantly correlated with posterior maximum bite force (P). Go-Me, P-1 and IMPA were significantly correlated with anterior maximum bite force (A).

A study on the maximum bite force and facial morphology according to chewing side preference / 대한치과교정학회지

This study was undertaken to investigate the distribution of the chewing side preference and variations in the maximum bite force and facial morphology according to chewing side preference since unilateral chewing may cause morphologic and functional anomalies. 50 dental students who had no signs or symptoms of masticatory system and Angle's Class I relationship in posterior segments were selected, and divided into two groups, that is, 25 in bilateral chewing group(19 male and 6 female) and 25 in unilateral chewing group(10 male and 15 female). Maximum bite force was estimated and posteroanterior cephalogram were measured and statistically analyzed. The results were as follows: 1. There were more students with bilateral chewing side preference(68%) and unilateral chewing side group consisted of right side preference(68%) and left side preference(32%). 2. There was no significant difference in the strength of max. bite force between the right and left side in bilateral chewing group. The bite force of the chewing side was greater in the unilateral chewing group but less in the non-chewing side compared to those of bilateral chewing group with no significant difference. Max. bite force of chewing side was greater than that of non-chewing side in the unilateral chewing group(Female : p<0.05). Max. bite force of males was about twice in that of females in both groups(p<0.05). Max. bite force of chewing side of the unilateral chewing group was similar to that of the bilateral chewing group, but that of non-chewing side was less than that of the bilateral chewing group. 3. In comparison of the facial morphology, there was no statistically significant difference in the size between the right and left side of the bilateral chewing group and between chewing and non-chewing side of the unilateral chewing group.