Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 20 de 146
Filtrar
1.
Braz. oral res. (Online) ; 38: e010, 2024. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1557356

RESUMEN

Abstract: This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 με. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.

2.
Dental press j. orthod. (Impr.) ; 29(1): e2423195, 2024. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1534312

RESUMEN

ABSTRACT Introduction: Surgically assisted rapid palatal expansion (SARPE) has been the treatment of choice in subjects presenting skeletally mature sutures. Objective: The purpose of this study was to analyze stress distribution and displacement of the craniofacial and dentoalveolar structures resulting from three types of palatal expanders with surgical assistance using a non-linear finite element analysis. Material and Methods: Three different palatal expanders were designed: Model-I (tooth-bone-borne type containing four miniscrews), Model-II (tooth-bone-borne type containing two miniscrews), and Model-III (bone-borne type containing four miniscrews). A Le Fort I osteotomy was performed, and a total of 5.0 mm palatal expansion was simulated. Nonlinear analysis (three theory) method (geometric nonlinear theory, nonlinear contact theory, and nonlinear material methods) was used to evaluate stress and displacement of several craniofacial and dentoalveolar structures. Results: Regardless of the maxillary expander device type, surgically assisted rapid palatal expansion produces greater anterior maxillary expansion than posterior (ANS ranged from 2.675 mm to 3.444 mm, and PNS ranged from 0.522 mm to 1.721 mm); Model-I showed more parallel midpalatal suture opening pattern - PNS/ANS equal to 54%. In regards to ANS, Model-II (1.159 mm) and Model-III (1.000 mm) presented larger downward displacement than Model-I (0.343 mm). PNS displaced anteriorly more than ANS for all devices; Model-III presented the largest amount of forward displacement for PNS (1.147 mm) and ANS (1.064 mm). All three type of expanders showed similar dental displacement, and minimal craniofacial sutures separation. As expected, different maxillary expander designs produce different primary areas and levels of stresses (the bone-borne expander presented minimal stress at the teeth and the tooth-bone-borne expander with two miniscrews presented the highest). Conclusions: Based on this finite element method/finite element analysis, the results showed that different maxillary expander designs produce different primary areas and levels of stresses, minimal displacement of the craniofacial sutures, and different skeletal V-shape expansion.


RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) tem sido o tratamento de escolha em indivíduos que apresentam suturas esqueleticamente maduras. Objetivo: O objetivo deste estudo foi avaliar, utilizando uma análise não linear com elementos finitos, a distribuição de tensões e os deslocamentos das estruturas craniofaciais e dentoalveolares gerados por três tipos de expansores palatinos usados na ERMAC. Material e Métodos: Três tipos de expansores palatinos foram projetados: Modelo I (dento-osseossuportado com quatro mini-implantes), Modelo II (dento-osseossuportado com dois mini-implantes) e Modelo III (osseossuportado com quatro mini-implantes). Uma osteotomia Le Fort I foi realizada e foi simulada uma expansão palatina total de 5,0 mm. Um método de análise não linear (três teorias - teoria da não-linearidade geométrica, teoria do contato não linear e métodos para materiais não lineares) foi utilizado para avaliar a tensão e o deslocamento de diversas estruturas craniofaciais e dentoalveolares. Resultados: Independentemente do tipo de aparelho expansor palatino, a ERMAC produziu maior expansão anterior da maxila do que posterior (ENA variou de 2,675 mm a 3,444 mm e ENP variou de 0,522 mm a 1,721 mm); o Modelo I apresentou padrão de abertura mais paralela da sutura palatina mediana, com ENP/ENA igual a 54%. Com relação à ENA, o Modelo II (1,159 mm) e o Modelo III (1,000 mm) apresentaram maior deslocamento para baixo do que o Modelo I (0,343 mm). A ENP deslocou-se mais para anterior do que a ENA com todos os aparelhos; o Modelo III apresentou o maior deslocamento para anterior da ENP (1,147 mm) e da ENA (1,064 mm). Os três tipos de expansores apresentaram deslocamento dentário semelhante e separação mínima das suturas craniofaciais. Como esperado, diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensões (o expansor osseossuportado apresentou tensão mínima nos dentes, e o expansor dento-osseossuportado com dois mini-implantes apresentou o maior). Conclusões: Com base nesse estudo de elementos finitos, os resultados mostraram que diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensão, com deslocamento mínimo das suturas craniofaciais e diferentes expansões esqueléticas em forma de V.

3.
STOMATOLOGY ; (12): 135-140, 2023.
Artículo en Chino | WPRIM | ID: wpr-979287

RESUMEN

Objective@#To explore the effect of miniscrew-assisted rapid palatal expansion (MARPE) on mandible position in the treatment of adult skeletal Class Ⅰ malocclusion with maxillary transverse deficiency. @*Methods@#In this retrospective study, 20 cases of adult skeletal Class Ⅰ malocclusion with maxillary transverse deficiency treated with MARPE in our hospital from July 2019 to March 2022 were selected as research objects. CBCT data of three time points before treatment (T0), immediately after expansion (T1) and six months after retention (T2) were collected. The head position was standardized and calibrated by Dolphin software, and then mandible landmarks (left and right Condylion, left and right Gonion, Menton) were positioned. The linear distance changes of each landmark relative to the reference plane of coronal plane, axial plane and sagittal plane were measured, which represented the sagittal, vertical and horizontal displacement of mandible respectively. Repeated measurement ANOVA and LSD multiple comparison were used to evaluate the position change of each landmark.@*Results @#The Menton and right Gonion rotated clockwise at T1, and relapsed to the initial position at T2. No lateral displacement of Menton was found.@*Conclusion@#When MARPE is used to treat skeletal Class Ⅰ malocclusion with maxillary transverse deficiency, it causes a transient clockwise rotation of the mandiblar. The mandible does not show sagittal, vertical and horizontal position changes in long-term evaluation.

4.
Dental press j. orthod. (Impr.) ; 28(4): e2322220, 2023. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1514056

RESUMEN

ABSTRACT Objective: The aim of this randomized clinical trial was to evaluate and compare, during the first week of rapid maxillary expansion (RME), the impact caused by two types of appliances: Hyrax and Hybrid Hyrax. Methods: Forty-two patients who met the eligibility criteria (aged 11-14 years, with transverse maxillary deficiency, posterior crossbite, and presence of maxillary first premolars and first permanent molars) were selected and randomly divided into two groups: TBB GROUP (tooth-bone-borne expander), treated with Hybrid Hyrax (12 females and 9 males, mean age 13.3 ± 1.3 years), and TB GROUP (tooth-borne expander), treated with Hyrax (5 females and 16 males, mean age 13.3 ± 1.4 years). Pain and discomfort were assessed in two times: after the first day of activation (T1) and four days after, by means of the numerical rate scale and the instrument MFIQ (Mandibular Functional Impairment Questionnaire). Descriptive statistics and the Mann-Whitney test were used for comparison between groups and between sexes. A 5% significance level was adopted. Results: Both appliances had a negative impact, generating pain and discomfort, and reducing functional capacity. However, the scores obtained were of low intensity and no significant differences were observed between the groups. Considering sexes, there were statistically significant differences, with the female sex presenting higher scores for pain and functional limitation. Conclusions: Despite causing impact in pain and increase in the functional limitation, these changes were of low intensity, with no statistical difference between the groups. Females were more sensitive to the impact caused by the RME.


RESUMO Objetivo: O objetivo deste ensaio clínico randomizado foi avaliar e comparar, durante a primeira semana de expansão rápida da maxila (ERM), o impacto causado por dois tipos de aparelhos: Hyrax e Hyrax Híbrido. Métodos: Quarenta e dois pacientes que atendiam aos critérios de seleção (idade de 11 a 14 anos, com deficiência transversal da maxila, mordida cruzada posterior e presença de primeiros pré-molares e primeiros molares permanentes superiores) foram selecionados e divididos aleatoriamente em dois grupos: Grupo DOS (expansor dento-osseossuportado), tratado com Hyrax Híbrido (12 mulheres e 9 homens, idade média 13,3 ± 1,3 anos), e Grupo DS (expansor dentossuportado), tratado com Hyrax (5 mulheres e 16 homens, idade média de 13,3 ± 1,4 anos). A dor e o desconforto foram avaliados em dois momentos: após o primeiro dia de ativação (T1) e após quatro dias, por meio da escala de frequência numérica e do instrumento MFIQ (Questionário de Limitação Funcional Mandibular). A estatística descritiva e o teste de Mann-Whitney foram utilizados para comparação entre os grupos e entre os sexos. Adotou-se nível de significância de 5%. Resultados: Ambos os aparelhos tiveram impacto negativo, gerando dor e desconforto e reduzindo a capacidade funcional. No entanto, os escores obtidos foram de baixa intensidade e não foram observadas diferenças significativas entre os grupos. Considerando os sexos, houve diferenças estatisticamente significativas, com o sexo feminino apresentando maiores escores para dor e limitação funcional. Conclusões: Apesar de causar impacto na dor e aumento na limitação funcional, essas alterações foram de baixa intensidade, sem diferença estatística entre os grupos. As mulheres foram mais sensíveis ao impacto causado pela ERM.

5.
Braz. j. otorhinolaryngol. (Impr.) ; 88(supl.5): 162-170, Nov.-Dec. 2022. tab, graf
Artículo en Inglés | LILACS-Express | LILACS | ID: biblio-1420901

RESUMEN

Abstract Objective: The present prospective clinical study aimed to investigate the effects of rapid maxillary expansion on the airway, correlating airway volumes obtained on multi-slice computed tomography and polysomnography assessment of oxygen saturation and apnea/hypopnea index. Methods: Twenty-four patients (11 with obstructive sleep apnea and 13 with residual snoring, mean age 10.0 (1.8), were enrolled in the study. Each patient underwent multislice computed tomography and nocturnal polysomnography before rapid maxillary expansion and after removal of maxillary expansion after six months. Airway regions were segmented, and volumes were computed. Results: The increase in oropharyngeal volume was significant in both groups. Oxygen saturation and apnea/hypopnea index were not statistically significant. No correlation was found between total airway volume, oxygen saturation, and apnea/hypopnea index changes between the time points examined. Conclusions: This study showed that when rapid maxillary expansion is performed in individuals with sleep-disordered breathing, there were statistically significant differences in oropharyngeal volume between pre- and post-rapid maxillary expansion, but there was no correlation between oxygen saturation values and oropharyngeal volume increase. Level of evidence: The article is classified as Evidence Level 3 (Three).

6.
J. oral res. (Impresa) ; 11(6): 1-14, nov. 3, 2022. ilus, tab
Artículo en Inglés | LILACS | ID: biblio-1442462

RESUMEN

Introduction: In recent years, rapid maxillary expansion (RME) in prepubertal growth stages has been deeply investigated; however, its study has recently been increasing in adults without need for surgery. The objective of this review is to present the results reported in the scientific literature about RME in adults. Material and Methods: Six databases were used to carry out the secondary search of the review. The search was performed virtually and studies from the last six years were considered, with a last search performed until November, 2022. Results: A total of 253 studies were found, from which 20 studies were finally selected. RME in adults can result in substantial expansion similar to that obtained in patients who have not yet completed the ossification of the mid-palatal suture. Conclusion: The reviewed scientific literature shows evidence that there are various devices supported by mini-implants as non-surgical treatment options to correct transverse deficiency and help expand the maxilla in adult patients.


Introducción: En los últimos años se ha investigado profundamente la expansión maxilar rápida (ERM) en etapas de crecimiento prepuberal; sin embargo, recientemente se ha ido incrementando su estudio en adultos sin necesidad de cirugía. El objetivo de esta revisión es presentar los resultados reportados en la literatura científica sobre ERM en adultos. Material y Métodos: Se utilizaron seis bases de datos para realizar la búsqueda secundaria de la revisión. La búsqueda se realizó de manera virtual y se consideraron estudios de los últimos seis años, con una última búsqueda realizada hasta noviembre de 2022. Resultados: Se encontraron un total de 253 estudios, de los cuales finalmente se seleccionaron 20 estudios. La ERM en adultos puede dar como resultado una expansión sustancial similar a la obtenida en pacientes que aún no han completado la osificación de la sutura palatina media. Conclusión: La literatura científica revisada muestra evidencia que existen diversos dispositivos apoyados en mini-implantes como opciones de tratamiento no quirúrgico para corregir la deficiencia transversal y ayudar a generar disyunción maxilar en pacientes adultos.


Asunto(s)
Humanos , Técnica de Expansión Palatina , Maloclusión , Implantes Dentales , Maxilar/cirugía , Maxilar/diagnóstico por imagen
7.
J. health sci. (Londrina) ; 24(1): 02-05, 20220322.
Artículo en Inglés | LILACS-Express | LILACS | ID: biblio-1362796

RESUMEN

Rapid maxillary expansion (RME) is the protocol of choice for early treatment of transverse malocclusions and it is achieved with fixed expanders that produce heavy forces to achieve midpalatal suture opening. One third of patients with maxillary constriction have a greater transversal deficiency at the intercanine width than at the intermolar. The aim of this article is to present a protocol for early treatment of posterior crossbite with the use of the expander with differential opening (EDO) for RME. It is a new appliance to perform RME and its main advantage would be to allow the expansion individualization. EDO was proposed aiming to promote greater expansion on the anterior rather than on the posterior region. A 9 year-old female sought treatment. The interceptive treatment plan was based on using EDO for RME. The post-expansion orthopedic response showed an opening of 7.5 mm between the maxillary central incisors, at the level of the incisal edge. It was observed an opening of 4.8mm in the midpalatal suture. The opening at a distance of 10 mm and 20 mm from the crest to posterior at the midpalatal suture were 3.9mm and 2.8mm. The upper intercanine distance showed an increase of 9.31 mm. The upper intermolar distance had increased 8.04 mm. The upper arch perimeter showed a difference from 74.02 mm to 80.11 mm . And the upper arch length, from 29.83 mm to 31.56 mm. The posterior crossbite was 2 mm overcorrected. Early diagnosis and treatment of posterior crossbite has a very favorable prognosis. (AU)


A expansão rápida da maxila (ERM) é a técnica de escolha para o tratamento precoce das más oclusões transversais e é ativada com expansores fixos que produzem forças pesadas para possibilitar a abertura da sutura palatina mediana. Um terço dos pacientes com atresia maxilar apresenta uma maior deficiência transversal na região intercaninos do que na região intermolares. O objetivo desse artigo é apresentar um protocolo de tratamento precoce para a mordida cruzada posterior utilizando o expansor maxilar Diferencial (EMD) para realizar a ERM. EMD é um novo dispositivo que pode ser empregado para realização da ERM e sua principal vantagem seria permitir a individualização da expansão. EMD foi proposto para proporcionar maior expansão na região anterior do que na região posterior da maxila. Uma menina de 9 anos de idade buscou tratamento. O plano de tratamento interceptativo proposto foi ERM utilizando o dispositivo EMD. A resposta ortopédica pós expansão mostrou uma abertura de 7,5 mm entre os incisivos centrais superiores, ao nível da borda incisal. Foi observada uma abertura de 4,8 mm na sutura palatina mediana. A abertura a uma distância de 10 mm e 20 mm da crista para posterior na sutura palatina mediana foi de 3,9 mm e 2,8 mm. A distância intercaninos superior apresentou aumento de 9,31 mm. A distância intermolares superiores aumentou 8,04 mm. O perímetro do arco superior apresentou diferença de 74,02 mm para 80,11 mm. E o comprimento do arco superior, de 29,83 mm para 31,56 mm. A mordida cruzada posterior foi sobrecorrigida em 2 mm. O diagnóstico precoce e o tratamento da mordida cruzada posterior tem um prognóstico muito favorável. (AU)

8.
Journal of Peking University(Health Sciences) ; (6): 346-355, 2022.
Artículo en Chino | WPRIM | ID: wpr-936158

RESUMEN

OBJECTIVE@#To assess three-dimensional (3D) changes of circummaxillary sutures following maxillary protraction with alternate rapid palatal expansions and constrictions (RPE/C) facemask protocol in maxillary retrusive children, and to investigate the relationship between the changes of circum-maxillary sutures and zygomaticomaxillary suture (ZMS) maturation, and to explore the factors of maxilla forward movement with RPE/C and facemask.@*METHODS@#In the study (clinical trial registration No: ChiCTR2000034909), 36 maxillary retrusive patients were recruited and block randomized to either the rapid palatal expansion (RPE) group or the RPE/C group. Patients aged 7 to 13 years, Class Ⅲ malocclusion, anterior crossbite, ANB less than 0°, Wits appraisal less than -2 mm, and A-Np less than 0 mm were included in the study. The RPE group received rapid palatal expansion, whereas the RPE/C group received alternate rapid palatal expansions and constrictions, and both with facemask protraction. Head orientations of cone-beam computed tomography (CBCT) images were implemented by Dolphin 11.7. 3D measurements of circummaxillary sutures on CBCT images were evaluated using Mimics 10.01 before (T0) and after treatment (T1). The changes were analyzed with independent t test, two-way ANOVA, Pearson correlation and regression analysis.@*RESULTS@#Two subjects in the RPE/C group were lost to follow-up. A total of 34 patients reached the completion criteria and were analyzed. Compared with the RPE group, sagittal changes of circummaxillary sutures were significantly increased in the RPE/C group with 1.21 mm advancement of zygomaticotemporal suture, 2.20 mm of ZMS, 1.43 mm of zygoma-ticofrontal suture (P < 0.05, respectively). Except for the zygomaticotemporal suture, the rest forward sagittal changes of other circummaxillary sutures showed no major difference in terms of the ZMS maturation. The Spearman's correlation in RPE/C indicated a strong positive correlation of sagittal changes between ZMS and point A (P < 0.01) with a regression analysis R2=42.5%.@*CONCLUSION@#RPE/C might be more effective on the treatment of maxillary retrusive children. As one of the major mechanical loading sutures during orthopedic therapy, ZMS showed a strong positive correlation with point A on sagittal changes.


Asunto(s)
Humanos , Tomografía Computarizada de Haz Cónico/métodos , Constricción , Maloclusión de Angle Clase III/terapia , Maxilar/diagnóstico por imagen , Técnica de Expansión Palatina , Suturas
9.
Dental press j. orthod. (Impr.) ; 27(6): e2220525, 2022. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1421345

RESUMEN

ABSTRACT Objective: The aim of this study was to test the null hypothesis that there is no difference at the midpalatal suture opening after rapid maxillary expansion (RME) using Expander with Differential Opening (EDO), Hyrax-type and Haas-type expanders. Methods: Occlusal radiographs of 52 patients (19 males and 33 females; average age= 9.46?1.20 years) treated with RME were divided into three groups, according to the expander used: EDO (n=17), Hyrax-type (n=21) and Haas-type (n=14). The evaluated variables were: A) Distance between the maxillary central incisors at the incisal edge; B) Distance between the alveolar ridges at the midpalatal suture; C) Suture opening at 10-mm distance from the crest to posterior, at the midpalatal suture; D) Suture opening at 20-mm distance from the crest to posterior, at the midpalatal suture; and E) Suture opening at 30-mm distance from the crest to posterior, at the midpalatal suture. To assess the normality of variables, the Shapiro-Wilk test was performed. For intergroup comparison, ANOVA with a significance level of 5% was used. Results: At the region A, Hyrax-type (4.66 mm) and EDO (4.87 mm) groups presented larger openings than the Haas-type group (3.43 mm). In regions B and C, EDO showed a statistically significant greater opening than the Haas-type group. In region D, a smaller opening of the midpalatal suture was observed in the Haas-type group, compared to the Hyrax-type and EDO groups. Conclusions: EDO and Hyrax-type produced greater immediate skeletal effects, compared with Haas-type, but these differences were about 1 mm and might not be clinically significant.


RESUMO Objetivo: O objetivo do presente estudo foi testar a hipótese nula de que não existe diferença na abertura da sutura palatina mediana após a expansão rápida da maxila (ERM) usando os expansores Diferencial, tipo Hyrax e tipo Haas. Métodos: Radiografias oclusais de 52 pacientes (19 do sexo masculino e 33 do sexo feminino; idade média: 9,46 ? 1,20 anos) tratados com ERM foram divididas em três grupos, de acordo com o tipo de expansor usado: Diferencial (n = 17), tipo Hyrax (n = 21) e tipo Haas (n = 14). As variáveis avaliadas foram: A) distância entre os incisivos centrais superiores na borda incisal; B) distância entre os rebordos alveolares na sutura palatina mediana; C) abertura da sutura a 10 mm de distância da crista para posterior, na sutura palatina mediana; D) abertura da sutura a 20 mm da crista para posterior, na sutura palatina mediana; e E) abertura da sutura a 30 mm da crista para posterior, na sutura palatina mediana. Para verificar a normalidade das variáveis, utilizou-se o teste de Shapiro-Wilk. Para comparação intergrupos, usou-se a ANOVA com nível de significância de 5%. Resultados: Na região A, os grupos tipo Hyrax (4,66 mm) e Diferencial (4,87 mm) apresentaram uma abertura maior do que o grupo tipo Haas (3,43 mm). Nas regiões B e C, o Diferencial mostrou abertura significativamente maior do que o grupo tipo Haas. Na região D, uma abertura menor da sutura palatina mediana foi observada no grupo tipo Haas, comparado aos grupos tipo Hyrax e Diferencial. Conclusões: Os expansores Diferencial e tipo Hyrax produziram maiores efeitos esqueléticos imediatos, comparados ao tipo Haas, mas essas diferenças foram de aproximadamente 1 mm e podem não ser clinicamente significativas.

10.
Odontoestomatol ; 24(39)2022.
Artículo en Español | LILACS-Express | LILACS | ID: biblio-1386406

RESUMEN

Resumen Objetivo: Describir los resultados obtenidos con MARPE en pacientes adultos jóvenes en relación al ancho transversal intermolar, ancho transversal de cavidad nasal, complicaciones y otros resultados informados. Método: Se realizó un análisis siguiendo la guía Prisma, utilizando bases de datos Pubmed, SCIELO, Science Direct, Scopus, Sistema de información sobre literatura gris en Europa, Literatura Latinoamericana y del Caribe en Ciencias de la Salud, Google Académico, además de una búsqueda manual de libros y artículos científicos. Aplicando los criterios de inclusión y exclusión se analizaron 9 estudios. Resultados: MARPE aumenta el ancho transversal intermolar y el ancho de la cavidad nasal en pacientes adultos jóvenes. Las complicaciones periodontales y dentoalveolares registradas no son concluyentes. Conclusión: MARPE puede ser un tratamiento clínicamente viable y efectivo para pacientes adultos jóvenes que presenten deficiencia transversal maxilar.


Resumo Objetivo: Descrever os resultados obtidos com o MARPE em pacientes adultos jovens em relação à largura intermolares transversais, largura transversa da cavidade nasal, complicações e outros resultados relatados. Método: Foi realizada uma análise segundo o guia Prisma, nas bases de dados Pubmed, SCIELO, Science Direct, Scopus, Sistema de Informação sobre Literatura Cinza na Europa, Literatura Latino-americana e Caribenha em Ciências da Saúde, Google Acadêmico, além da busca manual de livros e artigos científicos. Aplicando os critérios de inclusão e exclusão, 9 estudos foram analisados. Resultados: MARPE aumenta a largura intermolar transversal e a largura da cavidade nasal em pacientes adultos jovens. As complicações periodontais e dentoalveolares registradas não são conclusivas. Conclusão: MARPE pode ser um tratamento clinicamente viável e eficaz para pacientes adultos jovens com deficiência transversa da maxila.


Abstract Objective: To describe the results obtained with MARPE in young adults regarding intermolar width, the transverse width of the nasal cavity, complications, and other results. Method: We conducted a literature review following Prisma guidelines in Pubmed, SCIELO, Science Direct, Scopus, the System for Information on Grey Literature in Europe, Latin American and Caribbean literature in Health Sciences, and Google Academic. We also conducted a manual search of books and scientific papers. The full articles were analyzed, and nine articles were selected after applying the inclusion and exclusion criteria. Results: The literature indicates that MARPE increases transverse intermolar width and the transverse width of the nasal cavity. The periodontal and dentoalveolar complications reported are inconclusive. Conclusion: MARPE could be a clinically viable and effective treatment for young adults with transverse maxillary deficiency.

11.
Dental press j. orthod. (Impr.) ; 27(2): e2219299, 2022. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1384684

RESUMEN

ABSTRACT Introduction: Surgically Assisted Rapid Palatal Expansion (SARPE) promote maxillary expansion in skeletally mature patients. This technique is effective; however, some side effects are still unknown. Objectives: evaluate the presence of alveolar defects (dehiscences and fenestrations) in patients submitted to the SARPE. The null hypothesis tested was: SARPE does not influence the number of dehiscences and fenestrationss. Methods: A retrospective quasi-experiment study of a convenience sample of 279 maxillary teeth, in 29 patients evaluated with Cone Beam Computed Tomography (CBCT) at T1 (before SARPE), T2 (after expansion) and T3 (after retention), was performed. The examined teeth were: canines, first and second premolars, first and second molars. in axial, coronal, and cross-sectional views. The evaluations involved viewing slices from mesial to distal of the buccal roots. Results: All statistical analyses were performed using SAS 9.3 and SUDAAN softwares. Alpha used in the study was 0.05. Alveolar defects increased statistically from T1 (69.0%) to T2 (96.5%) and T3 (100%). Dehiscences increased 195% (Relative Risk 2.95) at the end of expansion (T2). After retention (T3), individuals were on average 4.34 times more likely to develop dehiscences (334% increase). Fenestrations did not increase from T1 to T2 (p = 0.0162, 7.9%) and decreased from T2 to T3 (p = 0.0259, 4.3%). Presence of fenestrations at T1 was a significant predictor for the development of dehiscences in T2 and T3. Dehiscences increased significantly in all teeth, except second molars. Conclusion: The null hypothesis was rejected. After SARPE the number of dehiscences increased and fenestrations decreased. Previous alveolar defects were predictor for dehiscences after SARPE.


RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) promove expansão em pacientes esqueleticamente maduros. Essa técnica é efetiva; entretanto, alguns efeitos colaterais ainda são desconhecidos. Objetivos: Avaliar a presença de defeitos alveolares (deiscência e fenestração) em pacientes submetidos à ERMAC. A hipótese nula testada foi que a ERMAC não influenciaria o número de deiscências e fenestrações. Métodos: Foi realizado um estudo quase-experimental de uma amostra de conveniência de 279 dentes superiores, de 29 pacientes que foram avaliados por meio de tomografia computadorizada de feixe cônico (TCFC) em T1 (antes da ERMAC), T2 (após expansão) e T3 (após contenção). Caninos, primeiros e segundos pré-molares, primeiros e segundos molares foram examinados em cortes axiais, coronais e sagitais. As raízes vestibulares desses dentes foram avaliadas da face mesial até a distal. Resultados: Todas as análises estatísticas foram realizadas usando os softwares SAS 9.3 e SUDAAN. O alfa usado no estudo foi de 0,05. Os defeitos alveolares aumentaram significativamente de T1 (69,0%) para T2 (96,5%) e T3 (100%). Deiscências aumentaram 195% (risco relativo de 2,95%) no final da expansão (T2). Após contenção (T3), os pacientes tiveram, em média, 4,34 vezes mais chance de desenvolver deiscência (334% de aumento). As fenestrações não aumentaram de T1 para T2 (p= 0.0162, 7.9%) e diminuíram de T2 para T3 (p = 0.0259, 4,3%). A presença de fenestrações em T1 foi um preditor significativo para o desenvolvimento de deiscências em T2 e T3. Deiscências aumentaram significativamente em todos os dentes, exceto nos segundos molares. Conclusão: A hipótese nula foi rejeitada. Após a ERMAC, o número de deiscências aumentou e o de fenestrações diminuiu. Defeitos alveolares prévios foram preditores de deiscências após a ERMAC.

12.
Dental press j. orthod. (Impr.) ; 27(3): e2220233, 2022. tab, graf
Artículo en Inglés | LILACS-Express | LILACS, BBO | ID: biblio-1384692

RESUMEN

ABSTRACT Objective: The aim of this study was to compare the occlusal changes of rapid maxillary expansion (RME) and slow maxillary expansion (SME) in patients with unilateral complete cleft lip and palate (UCLP), by means of digital dental models. Methods: Group RME was composed by 22 patients (13 males and 9 females), with mean age of 9.9 years, treated with rapid maxillary expansion with Hyrax appliance in Center 1. Group SME was composed by 29 patients (14 females and 15 males), with mean age of 10.7 years, treated with slow maxillary expansion with quad-helix appliance in Center 2. Digital dental models of the maxillary dental arch were obtained immediately pre-expansion (T1) and 6-month post-expansion (T2). Transversal distances, arch perimeter, arch length, palatal depth, palatal volume and posterior tooth inclination were digitally measured. Interphase and intergroup comparisons were performed with paired t-test and independent t-test, respectively. Results: Intercanine expansion was 4 to 5mm in both groups, and increase in the intercanine distance was similar for both groups. RME group showed a greater increase in arch distances at the region of permanent premolar and molars, compared to SME group. Arch perimeter increase was greater for RME group, compared to SME. No differences were found for arch length, palatal depth, palatal volume and posterior tooth buccal tipping. Conclusion: RME and SME produced similar dentoalveolar outcomes, with greater amount of expansion on RME group.


RESUMO Objetivo: O objetivo do presente estudo foi comparar, por meio de modelos digitais, as alterações oclusais após a expansão rápida da maxila (ERM) e após a expansão lenta da maxila (ELM) em pacientes com fissura labiopalatina completa unilateral (FLPU). Métodos: O grupo ERM foi composto por 22 pacientes (13 homens e 9 mulheres), com idade média de 9,9 anos, tratados com expansão rápida da maxila com aparelho Hyrax no Centro 1. O grupo ELM foi composto por 29 pacientes (14 mulheres e 15 homens), com idade média de 10,7 anos, tratados com expansão lenta da maxila com aparelho quadri-hélice no Centro 2. Modelos digitais da arcada dentária superior foram obtidos imediatamente pré-expansão (T1) e seis meses pós-expansão (T2). Distâncias transversais, perímetro da arcada, comprimento da arcada, profundidade do palato, volume do palato e inclinação dos dentes posteriores foram medidos digitalmente. As comparações interfases e intergrupos foram realizadas com teste t pareado e teste t independente, respectivamente. Resultados: A expansão da arcada na região dos caninos foi de 4 a 5 mm em ambos os grupos, e o aumento na distância intercaninos foi semelhante nos dois grupos. O grupo ERM apresentou maior aumento nas distâncias entre pré-molares e molares permanentes, em comparação ao grupo ELM. O aumento do perímetro da arcada foi maior para o grupo ERM, em relação ao ELM. Não foram encontradas diferenças para comprimento da arcada, profundidade do palato, volume do palato e inclinação vestibular dos dentes posteriores. Conclusão: ERM e ELM produziram resultados dentoalveolares semelhantes, com maior quantidade de expansão no grupo ERM.

13.
Odontol. sanmarquina (Impr.) ; 24(4): 341-350, oct.-dic. 2021.
Artículo en Español, Inglés | LILACS-Express | LILACS | ID: biblio-1342085

RESUMEN

El objetivo de esta revisión de literatura es reportar los cambios dentoalveolares y esqueléticos del arco mandibular después de una expansión maxilar rápida (EMR) en denticiones mixtas. Se realizó una búsqueda electrónica en las siguientes bases de datos: Medline/PubMed, Scopus, LILACS y búsqueda manual en las principales revistas de ortodoncia (American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontics, Seminars in Orthodontics) y en Google Scholar. Los criterios de elegibilidad incluyeron todos los estudios relacionados al tema de la revisión, en inglés y español, sin restricción del año de publicación. De un total de 62 artículos encontrados, se eligieron 10 para ser analizados. Diversos autores coinciden en la presencia de cambios esqueléticos y dentoalveolares espontáneos clínicamente significativos en el arco dental mandibular a corto y largo plazo después de la EMR. Durante el período posterior a la EMR, se pudo observar un desplazamiento anterior mandibular debido a la sobreexpansión del maxilar, además, se registraron cambios dentoalveolares y aumento en el ancho de las arcadas dentarias.


The objective of this literature review is to report dentoalveolar and skeletal changes of the mandibular arch after rapid maxillary expansion (RMS) in mixed dentitions. An electronic search was carried out in the following databases: Medline/PubMed, Scopus, LILACS as well as manual search in the main orthodontic journals (American Journal of Orthodontics and Dentofacial Orthopedics, The Angle Orthodontics, Seminars in Orthodontics) and Google Scholar. The eligibility criteria included all studies related to the topic being reviewed, in English and Spanish, without restrictions on the year of publication. Of a total of 62 articles found, 10 were chosen to be analyzed. Quite a few authors agree on the presence of clinically significant spontaneous skeletal and dentoalveolar changes, in the mandibular dental arch in short and long term after RMS. During the aftermath of the RMS, an anterior mandibular displacement could be observed due to the overexpansion of the maxilla, in addition, dentoalveolar changes and an increase in the width of the dental arches were recorded.

14.
Braz. j. otorhinolaryngol. (Impr.) ; 87(3): 315-325, May-Jun. 2021. tab, graf
Artículo en Inglés, Portugués | LILACS | ID: biblio-1285680

RESUMEN

Abstract Introduction The association between the treatment of transverse maxillary deficiency and the recovery of hearing and voice functions has gained attention in recent years. Objective This prospective controlled trial aimed to evaluate the effects of rapid maxillary expansion on hearing and voice function in children with non-cleft lip palate and bilateral cleft lip palate with transverse maxillary deficiency Methods 53 patients (26 non-cleft and 27 bilateral cleft lip palate; mean age, 11.1 ± 1.8 years) requiring rapid maxillary expansion for correction of narrow maxillary arches were recruited for this trial. Eight sub-groups were established based on the degree of hearing loss. Pure-tone audiometric and tympanometric records were taken for each subject at four different time periods. The first records were taken before rapid maxillary expansion (T0), the second after expansion (T1) (mean, 0.8 months), the third after three months (T2) (mean, 3 months) and the fourth at the end of retention period (T3) (mean, 6 months). ANOVA and Tukey HSD post-hoc tests were used for data analysis. Additionally, voice analysis was done using an updated PRAAT software program in a computerized speech lab at T0 and T2. A paired-samplet-test was used for comparisons of mean values of T0 and T2 voice parameters within both groups. Results Rapid maxillary expansion treatment produced a significant increase in the hearing levels and middle ear volumes of all non-cleft and bilateral cleft lip palate patients with normal hearing levels and with mild conductive hearing loss, during the T0-T1, T1-T2, T0-T2, and T0-T3 observation periods (p < 0.05). The significant increase was observed in right middle ear volumes during the T0-T1, T0-T2 and T0-T3 periods in non-cleft patients with moderate hearing loss. For voice analysis, significant differences were observed only between the T0 and T2 mean fundamental frequency (F0) and jitter percentage (p < 0.05) in the non-cleft group. In the cleft group, no significant differences were observed for any voice parameter between the T0 and T2 periods. Conclusion Correction of the palatal anatomy by rapid maxillary expansion therapy has a beneficial effect on both improvements in hearing and normal function of the middle ear in both non-cleft and bilateral cleft lip palate patients. Similarly, rapid maxillary expansion significantly influences voice quality in non-cleft patients, with no significant effect in BCLP patients.


Resumo Introdução A associação entre o tratamento da deficiência maxilar transversa e a recuperação das funções auditivas e vocais ganhou atenção nos últimos anos. Objetivo Avaliar os efeitos da expansão rápida da maxila na função auditiva e vocal em crianças sem fissura labiopalatina e com fissura labiopalatina bilateral com deficiência maxilar transversa. Método Foram recrutados para este estudo 53 pacientes (26 sem fissura e 27 com fissura labiopalatina bilateral; média de 11,1 ± 1,8 anos) que necessitam de expansão rápida da maxila para correção de arcos maxilares estreitos. Oito subgrupos foram estabelecidos com base no grau de perda auditiva. Registros audiométricos e timpanométricos de tons puros foram obtidos para cada indivíduo em quatro períodos. Os primeiros registros foram obtidos antes da expansão rápida da maxila (T0), o segundo após a expansão (T1) (média de 0,8 meses), o terceiro após três meses (T2) (média de 3 meses) e o quarto no fim do período de retenção (T3) (média de 6 meses). Anova e o teste post-hoc de Tukey HSD foram usados para análise dos dados. Além disso, a análise da voz foi feita com um programa PRAAT atualizado em um laboratório de fala computadorizadaem T0 e T2. Foi usado um teste t de amostras pareadas para comparação dos valores médios dos parâmetros de voz em T0 e T2 nos dois grupos. Resultados O tratamento com expansão rápida da maxila produziu um aumento significativo nos níveis auditivos e nos volumes da orelha média de todos os pacientes sem fissura e pacientes com fissura labiopalatina bilateral e níveis auditivos normais e com perda auditiva condutiva leve, durante os períodos de observação T0-T1, T1-T2, T0-T2 e T0-T3 (p < 0,05). Aumento significativo foi observado nos volumes da orelha média direita durante os períodos T0-T1, T0-T2 e T0-T3 em pacientes sem fissura e com perda auditiva moderada. Para a análise de voz, diferenças significantes foram observadas apenas entre a frequência fundamental média T0 e T2 (F0) e a porcentagem de jitter (p < 0,05) no grupo sem fissura. No grupo com fissura, não foram observadas diferenças significantes para nenhum parâmetro de voz entre os períodos T0 e T2. Conclusão A correção da anatomia palatal pela expansão rápida da maxila tem um efeito benéfico tanto na melhoria da audição quanto na função normal da orelha média em pacientes sem fissura e com fissura labiopalatina bilateral. Da mesma forma, a expansão rápida da maxila influencia significativamente a qualidade da voz em pacientes sem fissura, sem efeito significativo em pacientes com fissura labiopalatina bilateral.


Asunto(s)
Humanos , Niño , Labio Leporino/complicaciones , Fisura del Paladar/complicaciones , Hueso Paladar , Estudios Prospectivos , Técnica de Expansión Palatina , Audición , Maxilar
15.
Artículo en Inglés | LILACS, BBO | ID: biblio-1180854

RESUMEN

ABSTRACT Objective: To assess the impact of wearing palatal expanders on the oral health-related quality of life (OHRQoL) of children aged 8 to 10 years. Material and Methods: The sample consisted of 35 children aged 8 to 10 years treated at the orthodontics and pediatric dentistry outpatient clinics affiliated with the Dental School. Children were divided in two groups: 17 were submitted to palatal expansion treatment (Group 1), while 18 just received coronal polishing and topical fluoride application (Group 2). The Brazilian version of the Child Perceptions Questionnaire (CPQ8-10) was used to assess children's OHRQoL. The questionnaire was administered before the expander was placed, at the end of its activation, and before its removal. Intervals between the interviews were similar in the two groups. Descriptive statistics and ANOVA were used for data analyses. Results: The overall CPQ8-10 score was not significantly different between the groups. The results show statistically significant differences between the two groups only for the functional limitations domain after activation of the appliance (p=0.001). Conclusion: Palatal expanders may negatively affect children's functions only during the initial wearing period.


Asunto(s)
Humanos , Masculino , Femenino , Niño , Ortodoncia , Calidad de Vida , Salud Bucal/educación , Técnica de Expansión Palatina/instrumentación , Maloclusión/etiología , Facultades de Odontología , Brasil/epidemiología , Encuestas y Cuestionarios , Análisis de Varianza , Odontología Pediátrica
16.
Dental press j. orthod. (Impr.) ; 26(3): e2119300, 2021. tab, graf
Artículo en Inglés | LILACS, BBO | ID: biblio-1286207

RESUMEN

ABSTRACT Introduction: In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME). Description: Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area. Results: The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C. Conclusions: Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.


RESUMO Introdução: Em Ortodontia e Ortopedia Facial, o momento de início do tratamento pode ser crítico, e uma análise individual deve ser aplicada para promover um planejamento de tratamento favorável. No presente estudo, foram realizadas a avaliação individualizada da sutura palatina mediana (SPM) e medições no palato de adolescentes e adultos jovens tratados com expansão rápida da maxila (ERM). Descrição: Foram avaliados vinte e seis pacientes submetidos à ERM com aparelho dentossuportado (Hyrax). Os critérios de inclusão foram: idade mínima de 14 anos, apresentando todos os dentes posteriores, diagnosticado com discrepância transversa da maxila e com uma indicação clínica para expansão maxilar. A tomografia computadorizada de feixe cônico (TCFC) pré-tratamento desses pacientes foi avaliada para obter os estágios de maturação da SPM (MSPM), densidade da SPM (DSPM), comprimento do palato, espessura (anterior, intermediária e posterior) e área sagital. Resultados: Os estágios de maturação presentes foram C, D ou E; a densidade variou de 0,6 a 1, e foram determinados grupos de baixa (DSPM < 0,75) e alta densidade (DSPM ≥ 0,75). Indivíduos com maior DSPM apresentaram menor área sagital, em comparação com o grupo de densidade mais baixa. Indivíduos nos estágios D e E de MSPM apresentaram menor área sagital e espessura intermediária, comparados aos indivíduos no estágio C. Conclusão: Uma menor área sagital palatina foi observada nos grupos de alta DSPM e nos estágios D e E de MSPM.


Asunto(s)
Humanos , Masculino , Adolescente , Adulto Joven , Técnica de Expansión Palatina , Minorías Sexuales y de Género , Suturas , Homosexualidad Masculina , Suturas Craneales/diagnóstico por imagen , Tomografía Computarizada de Haz Cónico , Maxilar/cirugía , Maxilar/diagnóstico por imagen
17.
Dental press j. orthod. (Impr.) ; 26(3): e21bbo3, 2021. tab, graf
Artículo en Inglés | LILACS, BBO | ID: biblio-1286211

RESUMEN

ABSTRACT Introduction: Skeletal posterior crossbite (SPCB) has a multifactorial etiology, as it may be caused by parafunctional habits, atypical position of the tongue, tooth losses and maxillary or mandibular transverse skeletal asymmetries. Skeletal involvement may lead to facial changes and an unfavorable aesthetic appearance. The treatment of SPCB diagnosed in an adult patient should be correctly approached after the identification of its etiologic factor. Surgically-assisted rapid maxillary expansion (SARME), one of the techniques used to correct SPCB in skeletally mature individuals, is an efficient and stable procedure for the correction of transverse discrepancies that may be performed in the office or in a hospital. Objective: This study discusses the results of asymmetrical SARME used to correct unilateral SPCB associated with transverse mandibular asymmetry. Conclusion: The treatment alternative used in the reported case was quite effective. At the end of the treatment, the patient presented adequate occlusion and facial aesthetics.


RESUMO Introdução: A mordida cruzada posterior esquelética (MCPE) apresenta etiologia multifatorial, podendo ser causada por hábitos parafuncionais, posição atípica da língua, perdas dentárias e assimetrias esqueléticas transversais da maxila ou da mandíbula. Alterações faciais podem estar presentes quando há envolvimento esquelético, levando a estética desfavorável. O tratamento da MCPE, quando diagnosticada no paciente adulto, requer abordagem correta, com identificação do fator etiológico. Entre as técnicas utilizadas para correção da MCPE em pacientes esqueleticamente maduros, cita-se, em especial, a Expansão Rápida de Maxila Assistida Cirurgicamente (ERMAC). Essa modalidade tem se mostrado bastante eficiente na correção dos problemas transversais, apresenta estabilidade e pode ser realizada em ambiente ambulatorial ou hospitalar. Objetivo: O objetivo do presente trabalho será discutir os resultados da ERMAC assimétrica para correção da MCPE unilateral associada a assimetria transversal da mandíbula. Conclusão: A alternativa de tratamento utilizada no caso relatado mostrou-se bastante eficiente. Ao fim do tratamento, o paciente apresentou adequada oclusão e boa estética facial.


Asunto(s)
Humanos , Adulto , Diente , Maloclusión/terapia , Maloclusión/diagnóstico por imagen , Técnica de Expansión Palatina , Asimetría Facial/cirugía , Asimetría Facial/diagnóstico por imagen , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Maxilar
18.
Dental press j. orthod. (Impr.) ; 26(1): e211967, 2021. tab, graf
Artículo en Inglés | LILACS, BBO | ID: biblio-1154066

RESUMEN

ABSTRACT Objective: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. Methods: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). Results: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. Conclusions: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.


RESUMO Objetivo: Avaliar a influência da ancoragem mono e bicortical e do diâmetro dos mini-implantes (MIs) na estabilidade primária desses dispositivos. Métodos: 60 MIs autoperfurantes foram distribuídos em seis grupos, de acordo com o diâmetro (1,5 mm, 1,8 mm ou 2,0 mm) e tipo de ancoragem (monocortical e bicortical), e inseridos em costela bovina. A estabilidade primária foi avaliada pelos testes de torque de inserção, micromobilidade e resistência à tração. ANOVA e/ou análise de Tukey foram usadas para realizar comparações intergrupos (p< 0,05). Estatística não paramétrica (Kruskal-Wallis e Mann-Whitney) foi realizada quando a normalidade não foi encontrada (p< 0,05). Resultados: MIs com diâmetros maiores e ancorados bicorticalmente apresentaram maior estabilidade primária em relação ao torque de inserção (p< 0,05) e micromobilidade (p< 0,05). Apenas o diâmetro do MI influenciou os resultados do teste de resistência à tração. MIs de maior diâmetro apresentaram melhor retenção nos testes de resistência à tração (p< 0,001), independentemente da ancoragem mono ou bicortical. Conclusões: a estabilidade primária do MI é dependente de seu diâmetro e tipo de ancoragem. A ancoragem bicortical apresentou maior estabilidade quando comparada à ancoragem monocortical, independentemente das demais variáveis.


Asunto(s)
Humanos , Bovinos , Implantes Dentales , Métodos de Anclaje en Ortodoncia , Hueso Paladar , Técnica de Expansión Palatina , Torque
19.
Dental press j. orthod. (Impr.) ; 26(5): e21spe5, 2021. graf
Artículo en Inglés | LILACS, BBO | ID: biblio-1345937

RESUMEN

ABSTRACT Introduction: Due to the anatomical constraints of the mandible, mandibular dental arch usually serves as a guideline to determine the required changes in the maxillary transverse dimension. The Schwarz appliance and the Lip Bumper are the traditional orthodontic appliances for mandibular arch expansion in patients with borderline amounts of crowding, and/or transverse discrepancy. However, they often require patient cooperation, which may be a concern for orthodontists in daily practice. Objectives: This article illustrates a simple fixed orthodontic device as an alternative to achieve mandibular arch expansion in patients with moderate tooth-size/arch-length discrepancy. The four reported cases refer to 8 to 10-year-old patients in the mixed dentition, with an Angle Class I or Class II malocclusion, transverse deficiency in both arches, moderate crowding and/or posterior crossbite, combined with compromised smile aesthetics. The patients were treated with rapid maxillary expansion (RME) using Hass expander appliance and the modified Arnold expander (MAE). Conclusion: This low-cost compliance-free orthodontic appliance provided dentoalveolar decompensation by means of uprighting the posterior teeth, with minimal or no adjustments during treatment. The final results were achieved in only three to four months, and fulfilled all treatment objectives, such as an increase in the arch perimeter and width, and a better teeth alignment.


RESUMO Introdução: Devido aos limites anatômicos da mandíbula, a arcada dentária inferior geralmente serve como guia para determinar as alterações necessárias na dimensão transversal da maxila. O aparelho de Schwarz e o Lip Bumper são os aparelhos usados tradicionalmente para expansão da arcada inferior em pacientes com quantidades limítrofes de apinhamento e/ou discrepância transversal. No entanto, eles requerem a cooperação do paciente, o que pode ser uma preocupação para os ortodontistas na prática diária. Objetivos: O presente artigo ilustra uma alternativa diferente de aparelho fixo para se obter a expansão da arcada inferior em pacientes com discrepância moderada de tamanho dentário e/ou comprimento da arcada. Os quatro casos relatados referem-se a pacientes com 8 a 10 anos de idade, na dentição mista, com má oclusão de Classe I ou II de Angle, deficiência transversal em ambas as arcadas, apinhamento moderado e/ou mordida cruzada posterior, apresentando comprometimento da estética do sorriso. Os pacientes foram tratados com expansão rápida da maxila (ERM), usando aparelho expansor de Hass, e expansor Arnold modificado (EAM). Conclusão: O EAM, que é um aparelho de baixo custo e não depende da colaboração do paciente, promoveu uma descompensação dentoalveolar por meio da verticalização dos dentes posteriores, necessitando de mínimo ou nenhum ajuste durante o tratamento. Os resultados pretendidos foram alcançados em três a quatro meses e cumpriram todos os objetivos do tratamento, como aumento do perímetro e largura da arcada, assim como o melhor alinhamento dos dentes.


Asunto(s)
Humanos , Arco Dental , Maloclusión/terapia , Técnica de Expansión Palatina , Dentición Mixta , Estética Dental
20.
Pesqui. bras. odontopediatria clín. integr ; 21(supl.1): e0022, 2021. tab, graf
Artículo en Inglés | LILACS, BBO | ID: biblio-1340339

RESUMEN

ABSTRACT Objective: To compare the dento-alveolar effects between dental and skeletal anchored expansion devices to achieve maxillary expansion in different groups of patients: pure dental anchorage was used in growing patients and skeletal anchorage in adult patients. Linear, angular and volumetric parameters have been analysed. Material and Methods: 22 patients has been selected from the total archive of patients treated in the Orthodontics Department of the University of Ferrara, Italy, divided into 3 groups according to the appliance used to obtain the transversal maxillary correction. Digital files of the upper arch were obtained from scans performed using an intro-oral scanner before treatment (T0) and at the end of expansion (T1). Therefore, linear, angular and volumetric measurements have been performed. Results: There is a highly significant statistic variation of the 3-3, 4-4 and 6-6 diameter as a function of time. There was a statistically significant variation of the palatal vault angle and of the 6-6 distance at the cusp level as a function of time. Moreover, it appears that these parameters are reduced in the group with skeletal anchored expander. No tooth considered have encountered a statistically significant change in tip and torque values, no matter the type of RPE and the treatment time. For all patients, we have recorded the superimposition of the maxillary dental cast before and after treatment. Conclusion: In all patients, we obtained a resolution of the maxillary transverse deficit. Patients treated by pure skeletal anchored devices have recorded a less variations of palatal vault angle and the distance between first molar cusps, as if the expansion was gained more parallel. The expansion obtained showed reduced dental side effects, as tip and torque values haven't changed in a statistically significant way.


Asunto(s)
Humanos , Femenino , Niño , Adolescente , Adulto , Ortodoncia , Técnica de Expansión Palatina/instrumentación , Modelos Dentales , Maloclusión , Estudios Retrospectivos , Interpretación Estadística de Datos , Italia/epidemiología
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA