RESUMEN
Objective:To investigate the effect of dwell time deviation constraint of inverse optimization on the quality and position error robustness of three-dimensional (3D) brachytherapy plans for cervical cancer.Methods:A total of 20 patients with cervical cancer receiving 3D brachytherapy treatment in Xiangya Hospital Central South University from August 2020 to August 2021 were retrospectively selected. All plans were designed using the Eclipse treatment planning system, and the dwell time deviation constraint parameter smooth value in the system were set to 0.00, 0.25, 0.50, 0.75, and 1.00, respectively. An inverse dose volume optimization algorithm was used to generate plans with various smooth values, and the optimization conditions were the same as the original clinical plans. Key dosimetric metrics and total dwell time differences were comparatively analyzed. The applicators were intentionally subjected to position errors (0.2-1.0 cm) in 6 directions (left-right, anterior-posterior, head-foot), and the effect of various smooth values on plan quality and robustness was assessed. There were 133 plans per case and 2 660 plans for 20 patients. The results were statistically analyzed using the Wilcoxon signed-rank nonparametric test.Results:As the smooth value was increased, the modulation factor was gradually decreased and the D 2 cm3 of the bladder and rectum was increased. Plans with smooth values of 0.25, 0.50, 0.75, 1.00 had modulation factors of 0.72±0.09, 0.63±0.08, 0.55±0.08, 0.51±0.06, respectively, lower than 0.75±0.05 of the plan with the smooth value of 0.00, and all differences were statistically significant ( P=0.004, 0.002, 0.002, 0.002). The bladder D 2 cm3 of plans with smooth values of 0.50, 0.75, 1.00 were (475.4±41.0) cGy, (483.7±46.2) cGy, and (489.0±46.8) cGy, respectively, higher than (469.8±41.8) cGy of the plan with the smooth value of 0.00, with statistically significant differences (all P=0.002). The rectum D 2 cm3 of plans with smooth values of 0.50 and 0.75 plans were (413.2±93.3) cGy and (418.6±96.4) cGy, both higher than (410.2±91.5) cGy of the plan with the smooth value of 0.00, with statistically significant differences ( P=0.006, 0.010). When positional errors were introduced, the high risk clinical target volume (HR-CTV) D 90% was close for different smooth plans at most positional errors, and the differences were not statistically significant. The organs at risk D 2 cm3 of plans with the smooth value of 0.00 was lower than those of plans with other smooth values, and for the bladder and rectum, the differences were statistically significant at most positional errors (all P<0.01). Conclusions:The dwell time deviation constraint parameter exerts significant effect on the plan quality, and the smaller the value of the constraint parameter, the higher quality of the plan. The dwell time deviation constraint parameter has slight impact on the positional error robustness of dosimetric indices of targets and key organs at risk.
RESUMEN
Objective:To investigate the effects of different small monitor unit (MU) beam deletion optimization method in the CyberKnife treatment planning system on the calculated planned dose to brain tumors.Methods:A total of 17 patients with brain metastases treated in our hospital from June, 2021 to February, 2022 were selected for this study. A treatment plan was designed for each patient using the multiPlan system in the CyberKnife VSI system as the group without optimization. To improve the efficiency, the generated original plans should be optimized first by deleting some small MUs, forming an experience group and an optimization group for each patient. For the experience group, beams below 30 MU were deleted according to experience. For the optimization group, beams below the MU value calculated based on the second derivative method were deleted. Finally, the parameters of the two groups were statistically compared. The main evaluation parameters included the node number, the beam number, the total number of MUs, the estimated treatment duration, doses to 2% and 95% planning target volumes (PTV D2 and PTV D95), average dose to PTV ( Dmean), average dose to brain tissue ( Dmean-Brain), conformity index (CI), new conformity index (nCI), gradient index (GI), coverage, and the maximum doses to the brainstem and left and right lens ( Dmax-BS, Dmax-LL, and Dmax-RL), and the average doses to the dose shells 20 mm and 40 mm away from PTV (Shell20 and Shell40). Results:The two optimization method met the requirements for the prescription dose delivery to more than 98% PTV. There were statistical differences in the node number ( H = 7.97, P< 0.05) and estimated treatment duration ( H = 6.60, P < 0.05) among the group without MP optimization, the experience group, and the optimization group, with the estimated treatment duration and node number of the optimization group less than those of the group without MP optimization ( P < 0.05). There were no statistically significant differences in other parameters among the three groups ( P > 0.05). The PTV was moderately positively correlated with the treatment duration ( r=0.79, P < 0.01) and beam number ( r=0.78, P < 0.01) of the experience group, and was also moderately positively correlated with the treatment duration ( r=0.69, P < 0.01) and beam number ( r=0.71, P < 0.01) of the optimization group. Conclusions:For the CyberKnife planning of heads, the small MU beam deletion optimization method based on the second derivative can further shorten the treatment duration while ensuring no significant differences in the distribution of doses to organs at risk and targets. Moreover, this method is more effective in optimizing the plans for a large PTV volume.
RESUMEN
Objective To explore the value of generalized equivalent uniform dose (gEUD) optimization in radiotherapy for chest malignant tumors. Methods Sixty patients with chest malignant tumors who were treated in Center for Tumor Radiotherapy, Chizhou Municipal People’s Hospital, Anhui Province, China from October 2021 to June 2022 were enrolled; each patient underwent tumor localization with a conventional fixed computed tomography scan. The patients were divided into two groups using the same field direction and weight in the Varian Eclipse 15.6 planning system. The first group was planned using the conventional physical dose-volume objective function plus the Upper gEUD objective function, with organs at risks (OARs) optimized with the EUD values suggested by the Varian Eclipse 15.6 planning system. The second group only adopted the conventional physical dose-volume objective function for OARs optimization. The two groups were compared for the radiation doses delivered to the OARs. Results Compared with the conventional physical dose-volume objective function alone, the addition of Upper gEUD objective function resulted in no significant difference in lung V5Gy, but resulted in significant reductions in V20Gy and mean dose in the lungs; some reductions in V30Gy, V40Gy, and mean dose in the heart; and significant reductions in the maximum dose in the spinal cord. Conclusion The gEUD objective optimization can effectively protect the normal tissue in the radiotherapy for chest malignant tumors and thus is recommended in radiotherapy planning.
RESUMEN
Objective To investigate the impact of actual gantry angle on the accuracy of intensity-modulated radiotherapy (IMRT) for nasopharyngeal carcinoma (NPC). Methods A total of 27 patients with NPC were enrolled in this study. IMRT plans were designed with Pinnacle treatment planning system (TPS),and 8 beams with an interval of 30°(within 0°-360°) were selected for each plan. These plans were divided into plan A and plan B according to the beam parameters. In plan A,the minimum sub-field area was 5 cm2 ,the minimum number of sub-field monitor unit ( MU) was 5,and the maximum sub-field number was 80;in plan B,the minimum sub-field area was 8 cm2 ,the minimum number of sub-field MUs was 8,and the maximum sub-field number was 60.The gamma passing rate using the criteria of 3%/3 mm and 2%/2 mm at actual and zero degree gantry angles were calculated using Mapcheck 2 device for dose verification,and were compared with the paired t-test. The relationship between the above differences (Δ value) and the beam angle or the beam parameters was also analyzed. Results In plan A with the criteria of 3%/3 mm, the beams were significantly different (P=0000-0007) except for at angles of 270°,300°,and 300°,and the mean Δ value was 090%;under the criteria of 2%/2 mm,all beams were significantly different ( P=0000-0019) except for at an angle of 300°,and the meanΔvalue was 272%.In plan B with the criteria of 3%/3 mm,the beams showed no significant difference ( P=0052-0639) except for at an angle of 300 ° ,and the mean Δ value was 040%;under the criteria of 2%/2 mm,all beams showed no significant difference ( P>005) except for at angles of 210°,240°,270°,and 300°,and the meanΔvalue was 152%.When the plan B parameters were used, the Δ value was reduced;the results of two verification methods were more consistent,so the accuracy was also improved. Conclusions Compared with the validation method at zero degree gantry angle,the validation method at an actual gantry angle is associated with reduced gamma passing rate because of some factors such as gravity,which is not significantly related to the beam angle,but the beam parameters. In the design of IMRT plans for NPC,the total number of sub-fields should be decreased as far as possible,and the minimum sub-field area and the minimum number of MU should be increased, so as to improve the accuracy of treatment plans.
RESUMEN
Objective To investigate the impact of actual gantry angle on the accuracy of intensity-modulated radiotherapy (IMRT) for nasopharyngeal carcinoma (NPC). Methods A total of 27 patients with NPC were enrolled in this study. IMRT plans were designed with Pinnacle treatment planning system (TPS),and 8 beams with an interval of 30°(within 0°-360°) were selected for each plan. These plans were divided into plan A and plan B according to the beam parameters. In plan A,the minimum sub-field area was 5 cm2 ,the minimum number of sub-field monitor unit ( MU) was 5,and the maximum sub-field number was 80;in plan B,the minimum sub-field area was 8 cm2 ,the minimum number of sub-field MUs was 8,and the maximum sub-field number was 60.The gamma passing rate using the criteria of 3%/3 mm and 2%/2 mm at actual and zero degree gantry angles were calculated using Mapcheck 2 device for dose verification,and were compared with the paired t-test. The relationship between the above differences (Δ value) and the beam angle or the beam parameters was also analyzed. Results In plan A with the criteria of 3%/3 mm, the beams were significantly different (P=0000-0007) except for at angles of 270°,300°,and 300°,and the mean Δ value was 090%;under the criteria of 2%/2 mm,all beams were significantly different ( P=0000-0019) except for at an angle of 300°,and the meanΔvalue was 272%.In plan B with the criteria of 3%/3 mm,the beams showed no significant difference ( P=0052-0639) except for at an angle of 300 ° ,and the mean Δ value was 040%;under the criteria of 2%/2 mm,all beams showed no significant difference ( P>005) except for at angles of 210°,240°,270°,and 300°,and the meanΔvalue was 152%.When the plan B parameters were used, the Δ value was reduced;the results of two verification methods were more consistent,so the accuracy was also improved. Conclusions Compared with the validation method at zero degree gantry angle,the validation method at an actual gantry angle is associated with reduced gamma passing rate because of some factors such as gravity,which is not significantly related to the beam angle,but the beam parameters. In the design of IMRT plans for NPC,the total number of sub-fields should be decreased as far as possible,and the minimum sub-field area and the minimum number of MU should be increased, so as to improve the accuracy of treatment plans.
RESUMEN
Objective To study the influence of the angle of multileaf collimator leaves on segments (control point for sliding windows) number and monitor units in intensity-modulated radiotherapy (IMRT) plan optimization.Methods 10 cases undergone IMRT with rectangle target volume were choosed,2 plan were designed with step and shot technique and sliding windows technique for running direction of collimator with target long axis vertical and parallel respectively,compared the plans with similar optimization parameters for different angle of the collimator.Results The number of segments and monitor units increased by 52.8％ and 49.6％ more than longitudinal direction of leaf collimator with static IMRT respectively,there appeared significant difference (P =0.000) ; and the number of segments and monitor units increased by 58.2％ and 61.9％ more than longitudinal direction of leaf collimator with dynamic IMRT respectively,there appeared significant difference (P =0.000).Conclusions For the optimization of IMRT based on multileaf collimator,the direction of collimator perpendicular to the target long axis,there could be obviously decrease the number of monitor units,shorten the treatment time,improve the treatment efficiency with similar dose distribution.