Selamento dentinário imediato em restauração semidireta: relato de caso / Immediate dentin sealing in semi-direct restoration: case report

O selamento dentinário imediato é um procedimento essencial na Odontologia, que envolve a aplicação de agentes de selamento na interface entre a dentina e o material restaurador imediatamente após a remoção da cárie e do preparo da cavidade dentária. Este processo busca selar os túbulos dentinários expostos, proporcionando proteção à polpa dentária. O presente caso foi realizado em um paciente do sexo masculino, 56 anos que se queixou de desconforto no elemento dentário 17. Após avaliação clínica e radiográfica, foi constatado uma ampla restauração desadaptada na porção mesio - oclusal do referido dente, sendo que o elemento em questão não possui tratamento endodôntico. Após planejamento e assinatura do TCLE, os seguintes passos foram realizados: remoção da lesão cariosa do dente 17, seguido da realização do levantamento marginal mesial e a realização do selamento dentinário imediato. Moldagem com silicone de adição do dente em questão e do antagonista, assim como registro da mordida. Foi confeccionada uma restauração semidireta em resina composta sob o modelo de gesso obtido. A cimentação da restauração foi feita na consulta seguinte, cumprindo os requisitos fundamentais para restaurar forma, função e estética, resultando na melhoria da qualidade de vida do paciente(AU)

Immediate dentin sealing is an essential procedure in dentistry, involving the application of sealing agents at the interface between dentin and the restorative material immediately after caries removal and cavity preparation. This process aims to seal exposed dentinal tubules, providing protection to the dental pulp. The present case involved a 56-year-old male patient who complained of discomfort in tooth number 17. After clinical and radiographic evaluation, a wide, maladapted restoration in the mesio-occlusal portion of the tooth was identified, with no endodontic treatment in the affected element. Following planning and informed consent, the following steps were taken: removal of the carious lesion from tooth number 17, followed by the execution of mesial marginal elevation and immediate dentin sealing. Silicone addition molding of the affected tooth and antagonist, along with bite registration, was performed. A semi-direct restoration in composite resin was fabricated based on the obtained gypsum model. The restoration was cemented in the subsequent appointment, meeting the essential requirements to restore form, function, and aesthetics, resulting in an improvement in the patient's quality of life(AU)

Restauração transcirúrgica: passo a passo / Transsurgical restoration: step by step

Sabe-se que para uma restauração ser considerada um sucesso clínico é preciso que haja uma concomitância saudável entre a estrutura dentária, o material restaurador e as estruturas biológicas periodontais. As restaurações transcirúrgicas caracterizam-se como procedimentos alternativos para possibilitar a restauração de dentes com cárie dentária extensa, restaurações subgengivais desadaptadas e fraturas. O presente estudo teve como objetivo realizar um relato de caso de um procedimento cirúrgico-restaurador, através de uma técnica de restauração transcirúrgica. Este estudo tem como justificativa relatar um caso clínico, colaborando com maiores informações sobre a escolha da técnica a ser empregada, mostrando em quais situações devemos escolher uma restauração transcirúrgica e quais seus benefícios. Também, salientar se devemos fazer a recuperação do espaço biológico do periodonto ou não(AU)

It is known that for a restoration to be considered a clinical success, there must be a healthy concomitance between the tooth structure, the restorative material and the periodontal biological structures. Transsurgical restorations are characterized as alternative procedures to enable the restoration of teeth with extensive dental caries, maladapted subgingival restorations and fractures. The present study aims to carry out a case report of a surgical-restorative procedure, using a transsurgical restoration technique. This study is justified by reporting a clinical case, providing more information on the choice of technique to be used, showing in which situations we should choose a transsurgical restoration and what its benefits are. Also, highlight whether we should recover the biological space of the periodontium or not(AU)

Restauração em resina composta semidireta em dente posterior: relato de caso / Semi-direct composite restoration in posterior toth: a case report

A escolha da técnica restauradora desempenha papel fundamental na eficácia e duração de um tratamento reabilitador. O objetivo deste relato de caso foi descrever a utilização da técnica semidireta para a confecção de uma restauração em resina composta em um primeiro molar inferior. A paciente apresentava uma restauração insatisfatória no dente 36, que necessitava ser substituída devido à infiltração por cárie. Optou-se pela técnica semidireta devido à amplitude da cavidade, que envolvia estruturas de suporte, e pela combinação das vantagens das abordagens direta e indireta. O procedimento envolveu a remoção de tecido cariado, a aplicação de hidróxido de cálcio pasta, seguida da aplicação de uma fina camada de ionômero de vidro e, posteriormente, resina fluída para realizar o selamento dentinário. O preparo foi realizado seguindo os princípios necessários. O elemento em questão foi moldado com silicone de adição e o arco antagonista, com alginato. Ambos modelos foram vertidos com silicone para modelos semirrígidos e montados em oclusor de peças de brinquedo. A restauração semidireta foi confeccionada em resina composta Filtek Z350 XT, respeitando a anatomia do dente 36. Pigmentos foram utilizados para aprimorar detalhes estéticos. Após acabamento e polimento, a peça foi condicionada e cimentada com cimento dual Relyx Ultimate. Pode-se concluir que a abordagem restauradora por meio da técnica semidireta construída em modelo semirrígido é uma opção terapêutica conservadora e vantajosa para dentes com extensa destruição coronária. Essa técnica possibilita a restauração de forma eficaz, garantindo tanto a estética quanto a função adequada do dente afetado(AU)

The choice of restorative technique plays a fundamental role in the effectiveness and duration of rehabilitation treatment. The objective of this case report was to describe the use of the semi-direct technique to create a composite resin restoration in a lower first molar. The patient had an unsatisfactory restoration on tooth 36, which needed to be replaced due to cavity infiltration. The semi-direct technique was chosen due to the amplitude of the cavity, which involved support structures, and the combination of advantages of the direct and indirect approaches. The procedure involved the removal of carious tissue, and the application of calcium hydroxide paste, followed by the application of a thin layer of glass ionomer and, subsequently, fluid resin to seal the dentin. The preparation was carried out following the necessary principles. The element in question was molded with addition silicone and the antagonist arch was molded with alginate. Both models were poured with silicone for semi-rigid models and mounted on toy parts occluders. The semi-direct restoration was made in Filtek Z350 XT composite resin, respecting the anatomy of tooth 36. Pigments were used to improve aesthetic details. After finishing and polishing, the piece was conditioned and cemented with Relyx Ultimate dual cement. It can be concluded that the restorative approach using the semi-direct technique built on a semi-rigid model is a conservative and advantageous therapeutic option for teeth with extensive coronal destruction. This technique allows for effective restoration, ensuring both the aesthetics and adequate function of the affected tooth(AU)

Research progress on the mechanical compatibility of restorative materials with dental tissue / 口腔疾病防治

@#As the main means of mastication, teeth can withstand countless functional contacts. The mechanical properties of teeth are closely related to their tissue structure. Enamel and dentin have a high hardness and modulus of elasticity, and their graded structure allows them to withstand bite forces without being susceptible to fracture. When tooth tissue is defective, full crown restoration is often needed to restore the normal shape and function of the tooth. Metal materials, ceramic materials, and polyetheretherketone (PEEK) materials are commonly used for crown restoration. Metal materials have certain disadvantages in terms of aesthetics and are relatively rarely used in clinical practice. Ceramic materials with different compositions exhibit differences in performance and aesthetics, but their elastic modulus and hardness are much higher than those of dental tissue, resulting in mismatching mechanical properties. In contrast, the elastic modulus of PEEK is lower than that of tooth tissue and similar to that of bone tissue, but its properties can be improved by fiber reinforcement. Notably, when the mechanical properties of a restoration material and tooth tissue are not fully matched, the interface between them often forms a potential weak link, which ultimately affects the stability and long-term effect of the restoration. This article introduces the mechanical properties and corresponding structural characteristics of enamel and dentin. On this basis, the advantages and limitations of existing restoration materials are analyzed, and the possibility of biomimetic design of full crowns is further explored.

Restoration of a dental defect in a patient with ectodermal dysplasia: a case report and literature review / 口腔疾病防治

Objective@#To explore the treatment options for congenitally missing teeth in patients with ectodermal dysplasia and provide a clinical reference.@*Methods@#A patient with ectodermal dysplasia with a concave midface, anterior protrusion of the chin, and underdevelopment of the lower third of the face presented with congenital loss of multiple maxillary teeth, malocclusion of the remaining teeth, congenital loss of mandibular dentition, small dental arches, and upper and lower alveolar bone hypoplasia. The patient was treated by means of a removable partial maxillary prosthesis, implants in the anterior region of the lower mandible designed with the assistance of digital guides, and bar-clamped implant-overlay prostheses. A literature review of the protocol for the treatment of this condition was also conducted.@*Results@#In addition to good retention and stability after denture wear, an excellent occlusal relationship, improvement of the patient's facial appearance, including upper and lower lip fullness, more equal balancing of the lower and middle 1/3 of the face, and improved masticatory function were achieved. The results of the literature review showed that patients with ectodermal dysplasia who are congenitally edentulous usually have a complex intraoral situation that makes restoration difficult, and common restorative modalities for these patients include fixed bridges, removable partial dentures, complete dentures, overdentures, and implant prostheses, which need to be selected according to the actual intraoral situation of each patient. Currently, there is no consensus on the treatment of congenitally missing teeth in patients with ectodermal dysplasia, and some scholars have suggested that fixed restorations be recommended for patients with fewer missing teeth, while the option of removable or implant-covered denture restorations should be given to patients with more missing teeth, with removeable prostheses for underage patients that are replaced with permanent fixed prostheses when the jaws have stabilized.@*Conclusion@#In patients with ectodermal dysplasia with congenital tooth loss, all factors should be taken into account, and an individualized restorative plan should be developed.

Evaluation of the treatment effect on sinus elevation and implant restoration in cases with odontogenic maxillary sinusitis after tooth extraction / 口腔疾病防治

Objective@#To investigate the clinical effects of sinus elevation surgery and implant restorationdue to insufficient bone massafter tooth extraction in patients with odontogenic maxillary sinusitis (OMS) and to provide a reference for use in clinical practice.@*Methods@#This study was reviewed and approved by the Ethics Committee, and informed consent was obtained from the patients. Forty-five teeth were extracted from patients with OMS in the maxillary posterior area (the study group). Sinus elevation and implantation were performed due to insufficient bone height in the implant area 6-8 months after tooth extraction in the study group. Forty-eight teeth were extracted from patients without "OMS" in the maxillary posterior area (the control group), and sinus elevation and implantation were performed due to insufficient bone height in the implant area 6-8 months after tooth extraction inthe control group. In the study group, 13 cases of discontinuous maxillary sinus floor bone and residual alveolar bone height of the maxillary sinus floor less than 4 mm were addressed with lateral wall sinus elevation, and the other 32 cases were addressed with crest-approach sinus elevation. In the control group, 8 cases of residual alveolar bone height less than 4 mm in the maxillary sinus floor were addressed with lateral wall sinus,and the other 40 cases were addressed with crest approach sinus elevation. Restorations were placed 6 to 8 months after surgery. The patients were followed up 21 days, 3 months, and 8 months after implantation and every 6 months after the placement of the restorations. The sinus bone gain (SBG), apical bone height (ABL) and marginal bone loss (MBL) were statistically analyzed 24 months after the restoration.@*Results@#The average preoperative mucosal thickness in the 45 patients in the study group was (1.556 ± 0.693) mm, which was significantly larger than that in the control group (1.229 ± 0.425) mm (P<0.001). There were no perforations in either group. Twenty-four months after restoration, there was no significant difference in the SBG, ABH or MBL between the two groups (P>0.05).@*Conclusion@#After the extraction of teeth from patients with OMS, the inflammation of the maxillary sinus decreased, and the bone height and density in the edentulous area were restored to a certain degree. The effects of sinus floor lifting surgery and implant restoration do not differ between patients with and without OMS.

Endometrial mesenchymal stromal/stem cells improve regeneration of injured endometrium in mice

BACKGROUND: The monthly regeneration of human endometrial tissue is maintained by the presence of human endometrial mesenchymal stromal/stem cells (eMSC), a cell population co-expressing the perivascular markers CD140b and CD146. Endometrial regeneration is impaired in the presence of intrauterine adhesions, leading to infertility, recurrent pregnancy loss and placental abnormalities. Several types of somatic stem cells have been used to repair the damaged endometrium in animal models, reporting successful pregnancy. However, the ability of endometrial stem cells to repair the damaged endometrium remains unknown. METHODS: Electrocoagulation was applied to the left uterine horn of NOD/SCID mice causing endometrial injury. Human eMSC or PBS was then injected into the left injured horn while the right normal horn served as controls. Mice were sacrificed at different timepoints (Day 3, 7 and 14) and the endometrial morphological changes as well as the degree of endometrial injury and repair were observed by histological staining. Gene expression of various inflammatory markers was assessed using qPCR. The functionality of the repaired endometrium was evaluated by fertility test. RESULTS: Human eMSC successfully incorporated into the injured uterine horn, which displayed significant morphological restoration. Also, endometrium in the eMSC group showed better cell proliferation and glands formation than the PBS group. Although the number of blood vessels were similar between the two groups, gene expression of VEGF-α significantly increased in the eMSC group. Moreover, eMSC had a positive impact on the regeneration of both stromal and epithelial components of the mouse endometrium, indicated by significantly higher vimentin and CK19 protein expression. Reduced endometrial fibrosis and down-regulation of fibrosis markers were also observed in the eMSC group. The eMSC group had a significantly higher gene expression of anti-inflammatory factor Il-10 and lower mRNA level of pro-inflammatory factors Ifng and Il-2, indicating the role of eMSC in regulation of inflammatory reactions. The eMSC group showed higher implantation sites than the PBS group, suggesting better endometrial receptivity with the presence of newly emerged endometrial lining. CONCLUSIONS: Our findings suggest eMSC improves regeneration of injured endometrium in mice.

Traits of the host trees, not community diversity, drive epiphytes abundance in tropical seasonal forests / Atributos das árvores hospedeiras, e não a diversidade da comunidade, conduzem a abundância de epífitas em florestas tropicais sazonais

Abstract Epiphytes are considered indicators of forest ecological integrity, but the factors that explain their abundance are still not well understood. We here evaluated tree colonization by epiphytes in old-growth monospecific reforestation stands of Astronium urundeuva (M.Allemão) Engl. (Anacardiaceae) and Eucalyptus saligna Sm. (Myrtaceae), in comparison to a neighbor seasonal tropical forest fragment under similar environmental conditions. In each forest type, we identified and measured all trees (planted and colonizers) from 5-cm stem diameter in five 200 m² plots and quantified all vascular epiphytes per tree. Tree species were categorized by bark roughness, canopy deciduousness and growth rate. The abundance of epiphytes and the frequency of host trees were higher in the A. urundeuva plantation than in the native forest, with the E. saligna stand in an intermediate position. Also, we found that host traits influenced the abundance of epiphytes in their trunks. Host trees had average stem perimeter and height both higher than non-hosts, which indicates that colonization is more likely to occur in older trees. The average abundance of epiphytes per tree was higher in species with rough bark, but no relationship was found with canopy deciduousness or tree growth rate. We evidenced, therefore, that forest plantations, even if monospecific, can provide habitat for epiphytes. However, at community level, colonization success, either in native or restored forest, depends on the relative abundance of species whose bark type favors epiphytes establishment.

Resumo Epífitas são consideradas indicadores de integridade ecológica em florestas, mas os fatores que explicam sua abundância ainda não são bem compreendidos. Neste estudo, avaliamos a colonização por epífitas em antigos talhões monoespecíficos de Astronium urundeuva (M.Allemão) Engl. (Anacardiaceae) e Eucalyptus saligna Sm. (Myrtaceae), em comparação com um fragmento vizinho de floresta estacional semidecidual sob condições ambientais semelhantes. Em cada tipologia florestal, identificamos e medimos todas as árvores (plantadas e que colonizaram os locais) a partir de 5 cm de diâmetro à altura padrão, em cinco parcelas de 200 m². Nelas, também quantificamos todas as epífitas vasculares por árvore. Em busca de uma explicação funcional para as diferenças entre espécies, utilizamos rugosidade da casca, deciduidade da copa e taxa de crescimento como atributos potencialmente relevantes. A abundância das epífitas e a frequência de forófitos foi maior no talhão de A. urundeuva do que na floresta nativa, com o talhão de E. saligna ocupando uma posição intermediária. Encontramos evidências, também, de que os atributos dos forófitos influenciaram a abundância de epífitas em seus troncos. Os forófitos apresentaram maior perímetro médio e altura que as árvores não hospedeiras, o que indica que a colonização é mais provável de ocorrer em árvores mais velhas. A abundância média de epífitas por árvore foi maior em espécies com casca rugosa, mas nem a deciduidade da copa, nem a velocidade de crescimento exerceram efeito neste aspecto. Evidenciamos, portanto que, plantações florestais, ainda que monoespecíficas, podem prover habitat para epífitas. Contudo, em nível de comunidade, o sucesso da colonização, seja em florestas nativas ou restauradas, depende da abundância relativa de espécies cujo tipo de casca favorece o estabelecimento de epífitas.

La restauration de l'être: par le Rorschach d'une adolescente anorexique / A restauração do ser: através do Rorschach de uma adolescente anoréxica / The restoration of being: Through the Rorschach test of an anorexic adolescent / La restauración del ser: a través del Rorschach de una adolescente anoréxica

L'anorexie est une pathologie du vide de sens, qui presente une défaillance au niveau des processus de la pensée, avec des implications directes au niveau de la construction identitaire. Le Rorschach a été utilise comme instrument d'évaluation du fonctionnement mental et comme méthode d'analyse des transformations psychiques. Martha est une adolescente de dix-sept ans, avec deux hospitalisations, avec un diagnostic d'anorexie. L'analyse du Rorschach à mettre en évidence deux mouvements psychiques: la présence d'une forte tension pulsionnelle, mobilisée face à l'atteinte ressentie dans la relation Moi-Autre; la dévitalisation du Moi, par un fort mouvement d'annulation du Moi. La compréhension de ces mouvements a permis une intervention thérapeutique dans le but de restaurer son Être, de consolider son identité et de permettre un ensemble de transformations psychiques qui permettent la subjectivation et la croissance mentale.

Resumos A anorexia é uma patologia do vazio do sentido, que apresenta uma falha ao nível dos processos do pensamento, com implicações diretas ao nível da construção da identidade. O Rorschach foi usado como um instrumento para aceder ao funcionamento mental e como um método de análise das transformações psíquicas. Martha é uma adolescente de dezessete anos, com duas internações, com um diagnóstico de anorexia. A análise de Rorschach permitiu destacar dois movimentos psíquicos: a presença de uma forte tensão pulsional, mobilizada perante o ataque sentido na relação Eu-Outro; a desvitalização do Eu, através de um movimento de uma forte anulação do próprio eu. A compreensão desses movimentos permitiu uma intervenção terapêutica com o objetivo de restaurar o seu Ser, consolidar sua identidade e permitir um conjunto de transformações psíquicas que possibilitam a subjetivação e o crescimento mental.

Anorexia is a pathology of the emptiness of meaning, which presents a failure at the level of thought processes, with direct implications in self-identity. Rorschach test was used as an instrument to assess mental functioning and as a method to analyze the psychic transformations. Martha is a 17-year-old adolescent, with two previous hospitalizations, diagnosed with anorexia. Through Rorschach test, it was possible to highlight two movements: the presence of a strong instinctual drive, mobilized in the face of the perceived attack in the Self-Other relationship; the devitalization of the Self, through a strong annulment of the self. The understanding of such movements enabled a therapeutic intervention aimed at restoring her Being, consolidating her identity and enabling a set of psychic transformations that allow for subjectivation and mental growth.

La anorexia es una patología del vacío de sentido, que presenta una falla al nivel de los procesos del pensamiento, con implicaciones directas en la construcción de la identidad. El Rorschach se utilizó como instrumento para evaluar el funcionamiento mental y como método de análisis de las transformaciones psíquicas. Martha es una adolescente de 17 anos, con dos hospitalizaciones y diagnóstico de anorexia. El análisis del Rorschach reveló dos movimientos psíquicos: la presencia de una fuerte tensión instintiva, movilizada frente al ataque sentido en la relación Yo-Otro; la desvitalización del Yo, mediante un fuerte movimiento de anulación del Yo. La comprensión de estos movimientos permitió aplicar una intervención terapéutica con el objetivo de restaurar el Ser de la paciente, consolidar su identidad y permitir un conjunto de transformaciones psíquicas que permitan la subjetivación y el crecimiento psíquico.

Analysis of color stability and degree of conversion of different types of resin composites

Abstract Resin composites containing surface pre-reacted glass (S-PRG) have been introduced to reduce demineralization and improve remineralization of the tooth structure. However, water diffusion within the material is necessary for its action, which can impair its overall physicomechanical properties over time, including color stability. This study aimed to evaluate the color stability and related degree of conversion (DC) of four resin composites. Discs (6 x 4 mm, n = 5/group) of microhybrid (MH), nanofilled (NF), nanohybrid (NH), and S-PRG-based nanohybrid (S-PRG-NH) composites with two opacities (A2/A2E and A2O/A2D) were prepared. Color (CIELab and CIEDE2000) was evaluated with a spectrophotometer after aging in grape juice (2 x 10 min/10mL/7days). The DC was analyzed by using Fourier transform infrared spectroscopy before and after light-curing. Data were statistically analyzed by using two-way analysis of variance and post-hoc least significant difference tests (p<0.05). In the color stability analysis, the interaction between filler type and opacity was significant (CIELab, p = 0.0015; CIEDE2000, p = 0.0026). NH presented the highest color stability, which did not differ from that of MH. The greatest color alteration was observed for S-PRG-NH. S-PRG fillers also influenced DC (p < 0.05). The nanohybrid resin composite presented favorable overall performance, which is likely related to its more stable organic content. Notwithstanding the benefits of using S-PRG-based nanohybrid resins, mostly in aesthetic procedures, professionals should consider the susceptibility of such resins to color alteration, probably due to the water-based bioactive mechanism of action.

Microtensile bond strength of resin cements to 3-D printed and milled temporary restorative resins / Resistencia de unión en microtracción de cementos resinosos a resinas para provisionales impresas y fresadas

Abstract To evaluate the microtensile bond strength (µTBS) of two resin cements to 3D printed and milled CAD/CAM resins used for provisional fixed partial dentures. Blocks (5 x 5 x 5 mm) of three 3D-printed resins (Cosmos3DTemp / Yller; Resilab3D Temp / Wilcos and SmartPrint BioTemp, / MMTech) were printed (Photon, Anycubic Technology Co.). A milled material (VitaCAD-Temp, VITA) was used as control. Half the specimens were sandblasted and the rest were untreated. Two blocks were bonded with the corresponding resin cement: PanaviaV5 (Kuraray Noritake) and RelyX Ultimate (3M Oral Care). After 24 hours, the bonded blocks were sectioned into 1 x 1 mm side sticks. Half the beams were tested for µTBS and the other half was thermocycled (5000 cycles, 30s dwell-time, 5s transfer time) before µTBS testing. A four way Generalized Linear Model (material*sandblasting*cement*aging) analysis was applied. VITA exhibited the lowest µTBS, regardless of the cement, sandblasting and thermocycling. Sandblasting significantly improved the µTBS of VIT, especially after aging, but did not improve the µTBS of 3D printed resins. Sandblasting was not beneficial for 3D printed resins, although is crucial for adhesive cementation of milled temporary resins. Airborne particle abrasion affects the integrity of 3D-printed resins, without producing a benefit on the microtensile bond strength of these materials. However, sandblasting is crucial to achieve a high bond strength on milled temporary resins.

Resumen Evaluar la resistencia adhesiva en microtracción (µTBS) de dos cementos resinosos a resinas CAD/CAM impresas y fresadas indicadas para restauraciones provisionales. Bloques (5 x 5 x 5mm) de tres resinas impresas (Cosmos3DTemp / Yller; Resilab3D Temp / Wilcos and SmartPrint BioTemp, / MMTech) y una resina fresada (VitaCAD-Temp, VITA) fueron fabricados. La mitad de los especímenes fueron arenados y el resto no recibió tratamiento mecánico. Dos bloques con condiciones de tratamiento iguales fueron cementados con cemento resinoso (PanaviaV5 / Kuraray Noritake y RelyX Ultimate / 3M Oral Care). Después de 24 horas los bloques fueron seccionados en palitos de 1 mm² de área. En la mitad de los especímenes se midió la TBS inmediatamente y el resto fue termociclado (5000 ciclos, 30s remojo, 5s transferencia) antes de la prueba de TBS. Se aplica un análisis estadístico por Modelo Linear General con 4 factores (material*arenado*cemento*termociclado). La resina VITA presentó la menor µTBS, independientemente del cemento usado, el arenado y el termociclado. Sin embargo, el arenado aumentó la µTBS de VIT, especialmente después del termociclado. Por otro lado, el arenado no resultó en un aumento significativo de la µTBS de las resinas impresas. El arenado no fue beneficiosos para las resinas impresas, aunque es un paso crucial para la cementación adhesive de las resinas fresadas. El arenado afecta la integridad de las capas de las resinas impresas, sin generar un beneficio en la TBS.

El árbol Acacia mangium (Fabaceae) facilita la recuperación de áreas mineras en la selva lluviosa del Chocó, Colombia

Introducción: Las áreas impactadas por minería en bosques tropicales requieren de la aplicación de estrategias de restauración ecológica, pero este proceso, muchas veces involucra el uso de especies vegetales exóticas, desconociendo los efectos sobre la regeneración ecológica de los sitios donde se introducen. Objetivo: Evaluar el efecto de las plantaciones de Acacia mangium (planta exótica) sobre la rehabilitación ecológica temprana (suelo y vegetación) de áreas impactadas por minería de oro a cielo abierto en la selva pluvial tropical del Chocó, Colombia. Métodos: Se seleccionaron 16 áreas mineras como unidades de muestreo (ocho reforestadas con A. mangium y ocho en sucesión natural) en dos localidades. En cada unidad de muestreo se estableció una parcela de 2 × 50 m (cuatro parcelas por escenario de muestreo y localidad), donde se analizó la fertilidad del suelo (parámetros físicos y químicos) y se cuantificó el número de individuos de cada especie de planta vascular. Resultados: Se registraron 73 especies (69 géneros, 45 familias). La densidad de individuos fue mayor en áreas de sucesión natural que en aquellas reforestadas con A. mangium; por el contrario, la riqueza y diversidad de especies fueron superiores bajo las plantaciones de A. mangium. La similitud florística fue baja entre escenarios sucesionales (especies compartidas 35.6 %). El suelo mostró mejores condiciones (especialmente, N-NHO3) en áreas con A. mangium que en áreas en regeneración natural. Conclusiones: Las plantaciones de A. mangium parecen facilitar la rehabilitación temprana de la fertilidad del suelo y la vegetación en las minas abandonadas; por lo tanto, esta especie puede jugar un papel importante para la implementación de estrategias de restauración ecológica de áreas impactadas por minería de oro a cielo abierto en el Chocó y otros sistemas forestales tropicales con condiciones ambientales y de perturbación similares.

Introduction: Mining-impacted areas in tropical forests require the application of ecological restoration strategies, but this process often involves use of exotic plant species ignoring the effects on the ecological regeneration of the sites where they are introduced. Objective: To evaluate the effect of Acacia mangium plantations (exotic plant) on early ecological rehabilitation (soil and vegetation) of areas impacted by open-pit gold mining in the tropical rain forest of Chocó, Colombia. Methods: 16 mining areas were selected as sampling units (eight reforested with A. mangium and eight in natural succession) in two locations. In each sampling unit, a 2 × 50 m plot was established (four plots per sampling scenario and locality), where soil fertility (physical and chemical parameters) was analyzed and the number of individuals of each vascular plant species was quantified. Results: 73 species (69 genera, 45 families) were recorded. The density of individuals was higher in areas of natural succession than in those reforested with A. mangium; conversely, species richness and diversity were higher under the A. mangium plantations. Floristic similarity was low between successional scenarios (shared species 35.6 %). The soil showed better conditions (especially N-NHO3) in mining areas with A. mangium than in those in natural regeneration. Conclusions: A. mangium plantations appears to facilitate the early rehabilitation of soil fertility and vegetation in abandoned mines; therefore, this species can play an important role in the implementation of ecological restoration strategies in areas impacted by open-pit gold mining in the Chocó and other tropical forest systems with similar environmental and disturbance conditions.

Methodological Proposal for the Adequate Use of the Osteotechnics Technique / Propuesta Metodológica para el uso Adecuado de la Técnica Osteotécnica

SUMMARY: Osteotechnics is one of the different anatomical preservation techniques and can be defined as the technique designed to prepare, clean, obtain and preserve bone structures that can be used in the teaching, museographic or research field. The osteotechnical technique procedure consists of the following phases: debulk and disjoint, maceration, cooking, cleaning, degreasing, bleaching, and labeling to obtain bone material. Seven phases will be explained in detail, as well as the materials, instruments, quantities of the substances used, and the time required to obtain human bone material. We consider that this article can serve as a guide, given that all the experimentation was carried out with human biological material. This methodological proposal could be consolidated and established based on the experience acquired during the creation of the contemporary skeletal collection of the department of innovation in human biological material (DIMBIH). Therefore, the purpose of our proposal is to provide tools that facilitate the work of those who carry out this work and fundamentally to avoid irreversible or irreparable damage to the osteological material, since it is of great value and difficult to acquire for disciplines as anatomy, veterinary, physical and forensic anthropology, medicine, dentistry and biology.

La osteotecnia es una de las técnicas diferentes de conservación anatómica y puede definirse como la técnica destinada a preparar, limpiar, obtener y conservar estructuras óseas que pueden ser utilizadas en el ámbito docente, museográfico o de investigación. El procedimiento de la técnica osteotécnica consta de las siguientes fases: descarnado y desarticulado, maceración, cocción, limpieza, desengrase, blanqueo y marcaje para la obtención de material óseo. Se explicarán en detalle siete fases, así como los materiales, instrumentos, cantidades de las sustancias utilizadas y el tiempo necesario para obtener material óseo humano. Consideramos que este artículo puede servir de guía, dado que toda la experimentación se realizó con material biológico humano. Esta propuesta metodológica pudo consolidarse y establecerse a partir de la experiencia adquirida durante la creación de la colección esquelética contemporánea del Departamento de Innovación en Material Biológico Humano (DIMBIH). Por lo tanto, el propósito de nuestra propuesta es brindar herramientas que faciliten el trabajo de quienes realizan este trabajo y fundamentalmente evitar daños irreversibles o irreparables en el material osteológico, ya que es de gran valor y difícil adquisición para las disciplinas como la anatomía, veterinaria, antropología física y forense, medicina, odontología y biología.

¿Cómo Intervenir el Proceso de Caries en Personas Mayores? Adaptación del Consenso de ORCA/EFCD/DGZ

Los cambios demográficos y epidemiológicos actuales determinarán un aumento en la prevalencia e incidencia de caries, específicamente lesiones de caries radicular (RCLs, por sus siglas en inglés) en personas mayores, por lo que la necesidad de tratamiento de mayor cobertura y efectividad será también cada vez mayor. Este artículo resume en español la evidencia actual disponible acerca de las recomendaciones clínicas para las intervenciones preventivas, no invasivas, micro o mínimamente invasivas e invasivas para el manejo de la caries dental en personas mayores, con especial énfasis en RCLs. La presente publicación se basa en un taller de consenso, seguido de un proceso de consenso e-Delphi, realizado por un panel de expertos nominados por la Organización Europea para la Investigación en Caries (ORCA), la Federación Europea de Odontología Conservadora (EFCD) y la Federación Alemana de Odontología Conservadora (DGZ). El propósito de este artículo es presentar las principales conclusiones alcanzadas en el consenso de ORCA/EFCD/DGZ para permitir una mejor difusión del conocimiento y la aplicación de estos conceptos en la práctica clínica, orientando la correcta toma de decisiones en el manejo de la enfermedad y RCLs en las personas mayores.

Current demographic and epidemiological changes will condition increased caries prevalence and incidence, specifically root caries lesions (RCLs) in the elderly. There will be a need, therefore, for therapeutic approaches with greater coverage and effectiveness. This article summarizes, in Spanish, the current available evidence leading to clinical recommendations for preventive, non-invasive, micro or minimally invasive and invasive interventions for the management of dental caries in older people, with special emphasis on RCLs. This publication is based on a consensus workshop, followed by an e-Delphi consensus process, conducted by a panel of experts nominated by the European Organization for Caries Research (ORCA), the European Federation of Conservative Dentistry (EFCD) and the German Federation of Conservative Dentistry (DGZ). The purpose of this article is to present the main conclusions reached in the ORCA/EFCD/DGZ consensus to allow a better dissemination of knowledge and the application of these concepts in clinical practice, guiding the correct decision-making for the disease management and the RCLs in the elderly.

Invitro Comparative Analysis of the Flexural Strength of 4 Different Commercially Available Provisional Materials Used in Fixed Partial Dentures – An Original Research

Background: Provisional Prosthesis in fixed partial dentures are subjected to Flexure under stress. Selection of appropriate material for fabrication of Provisional is of utmost importance as the Provisional prosthesis has to remain in function till definitive prosthesis is delivered. Material & Methods: Bar type specimens of four different commercially available brands for provisional restorations fabricated according to ADA specification No. 27 and immersed in artificial saliva. The specimens were fractured under 3-point loading test. Results: The flexural strength ranged between 60 to 110 Mpa. BisGMA Auto polymerizing composite resin from Dentsply Caulk shows the highest flexural strength. Conclusion: Within the limitations of this study, the flexural strengths were material specific rather than category one. The BisGMA composite based resin shows significantly higher flexural strength over other materials

Manejo de extrusión forzada ortodóntica: Reporte de un caso / Management and Follow-up of Orthodontic Forced Extrusion: A Case Report

El presente caso clínico se enfoca en el diagnóstico y el tratamiento de erupción forzada en un paciente con trauma dental. Objetivo: Proponer una alternativa de tratamiento multidisciplinario el cual permita incrementar estructura dentaria a través de la extrusión forzada y posteriormente rehabilitarlo en función y estética. Métodos: Se describe el caso de un paciente adulto de 78 años de sexo masculino, sano y sin antecedentes patológicos, acude a la clínica de la Especialidad de Ortodoncia y Ortopedia Dentomaxilo facial, referido por un especialista en Endodoncia, debido a fractura corono-radicular de canino superior derecho, pilar de puente fijo de tres unidades En la exploración intraoral presenta fractura cervical de la corona del canino superior derecho. Como primer paso, se realizó tratamiento endodóntico en la pieza dentaria y colocación de un aditamento intraconducto de soporte (endoposte vaciado), con el objeto de mejorar la tracción ortodóntica. Este aditamento consistió en un poste colado con perforaciones. Se procede a colocar aparatología fija en la arcada superior con técnica MBT (slot 0.022), del molar derecho hasta el canino izquierdo de cementado indirecto y pasivo (con los slots de los brackets alineados). Inmediatamente después, se colocó un arco rectangular 0.019 x 0.025 de acero inoxidable con un doblez de extrusión a nivel del canino superior derecho. En el mismo doblez, se adaptó un loop tipo helix que funcionó como apoyo para colocar la ligadura pasiva (lace back). Resultados : El tratamiento realizado en este paciente es satisfactorio, coadyuvando en su estado de salud general mejorando su autoestima. Conclusión: Aquí se aprovecharon todas las ventajas que ofrece la extrusión ortodóntica forzada, incluso en un paciente adulto mayor, logrando una tracción de cuatro milímetros, que se consiguió gracias al empleo de fuerzas extrusivas ligeras y controladas sobre el órgano dentario afectado. Con la modalidad de tratamiento descrita se puede lograr un alargamiento de corona sin la necesidad de realizar una resección ósea, lo que permite una correcta rehabilitación protésica, devolviendo la función y estética al diente lesionado y brindando un beneficio integral al paciente.

The case of an adult patient with a complicated Crown fracture of the right upper canine due to trauma is reported, diagnosing a class VII Ellis coronal fracture. There are several treatment alternatives that range from the extraction, placement of a bone graft and placement of an implant, to a forced root extrusión with bone removal to allow the biological space and subsequently be restored. In the present case, a multidisciplinary orthodontic forced extrusion treatment is performed, which allows to increase the amount of clinical remnant, preserving the periodontal support and maintaining the biologic thickness, thus achieving to maintain the root remnant with good length so that prosthetic rehabilitation is facilitated. The clinical and radiographic follow-up was 12 months. The multidisciplinary treatment involved: Root canal treatment, forced extrusion with orthodontics, fibrotomy with root planing and fixed prosthesis.

Resistencia a la fractura de premolares superiores con tratamientos de endodoncia por accesos conservador y tradicional / Resistance to Fracture of Upper Premolars with Endodontic Treatment by Conservative and Traditional Access

Introducción: Las piezas dentarias luego de tratamiento de endodoncia aumentan su susceptibilidad a la fractura, lo que está asociado, principalmente, con la pérdida de la estructura dental. Objetivo: Evaluar in vitro, la resistencia a la fractura de premolares superiores con tratamientos de endodoncia mediante acceso tradicional, conservador y conservador Ninja, con restauración provisoria y final. Métodos: Estudio prospectivo de diseño experimental longitudinal con 42 premolares superiores donados, separados en 3 grupos según el tipo de acceso de endodoncia a aplicarse y luego cada uno en dos subgrupos según el tipo de restauración, y un grupo control, al cual no se le realiza endodoncia. Luego de realizar el tratamiento y la restauración, se evaluó la resistencia a la fractura mediante carga compresiva oblicua (45°), en una máquina de carga universal. Las cargas requeridas para la fractura se registraron en newtons y fueron comparadas estadísticamente. Resultados: Las piezas tratadas mediante acceso conservador Ninja con restauración provisoria y final, requirieron una carga promedio para la fractura de 513,45 N y 638,13 N, respectivamente. Fuerzas significativamente mayores a las resistencias ofrecidas por los otros tratamientos con p 0,05. Conclusiones: En la endodoncia in vitro, el diseño del acceso a la cavidad, tipo conservador Ninja, afectó significativamente la resistencia a la fractura de los premolares superiores, adquiriendo un comportamiento biomecánico similar al de las piezas control(AU)

Introduction: Tooth pieces, after endodontic treatment, increase their susceptibility to fracture, a phenomenon mainly associated with loss of tooth structure. Objective: To evaluate, in vitro, the resistance to fracture of upper premolars with endodontic treatment by traditional, conservative and conservative ninja access, with temporary and final restoration. Methods: A prospective study of longitudinal experimental design was carried out with 42 donated upper premolars, separated into three groups, according to the type of endodontic access to be applied; in turn, each was then divided into two subgroups, according to the type of restoration, and a control group, not performed endodontic treatment. After treatment and restoration, fracture resistance was evaluated using oblique compressive loading (45°) in a universal loading machine. The loads required for fracture were recorded in newtons and statistically compared. Results: The parts treated by conservative ninja access with provisional and final restoration required an average fracture load of 513.45 N and 638.13 N, respectively; this forces were significantly higher than the resistance values offered by the other treatments, with p < 0.05. Likewise, there were no significant differences in the resistance values obtained between the cases of conservative access and traditional access, nor when comparing the types of applied restoration, with P<0.05. Conclusions: In in vitro endodontics, the design of the access to the cavity of conservative ninja type significantly affected the resistance to fracture of the upper premolars, acquiring a biomechanical behavior similar to that of the control pieces(AU)

Frecuencia de perforaciones radiculares en tratamientos endodónticos realizados por estudiantes de postgrados chilenos

Introducción: Este estudio evaluó la frecuencia de perforaciones radiculares provocadas por estudiantes de primer y segundo año de la especialidad de Endodoncia de la Facultad de Odontología de la Universidad Andrés Bello (UNAB), Santiago (Chile), entre 2019 y marzo de 2021. Materiales y Métodos: Se realizó un estudio observacional descriptivo a través de datos recopilados retrospectivamente en fichas clínicas de pacientes atendidos en el área de postgrado en Endodoncia de la universidad, durante 2019, 2020 y hasta marzo de 2021. Resultados: Un total de 569 pacientes fueron atendidos en el período, 118 fueron atendidos por estudiantes de primer año y 451 por los de segundo año. La frecuencia de perforaciones del primer año fue de un 0% y la del segundo año del 2 % (n = 9). Considerando el total general de pacientes, la frecuencia relativa de perforaciones fue de apenas 1,6 %. Con respecto a ubicación, 3 perforaciones fueron en el tercio cervical de la raíz, 3 en el tercio medio, 2 en el tercio apical y 1 en el piso cameral. Ninguna perforación resultó en la indicación inmediata de extracción y todas fueron selladas con materiales a base de silicato de calcio. Conclusiones: La frecuencia de perforaciones radiculares por los estudiantes de postgrado fue muy baja, lo que podría evidenciar la seguridad de los protocolos institucionales de tratamiento y enseñanza. La mayor ocurrencia de perforaciones fue con los estudiantes de segundo año, lo cual puede ser atribuido a que tratan casos de mayor complejidad.

Introduction: The present study evaluated the frequency of root perforations caused by first- and second-year students of the Endodontics specialty of the Faculty of Dentistry of the UNAB University in Santiago (Chile), between January 2019 and March 2021. Materials and Methods: A descriptive observational study was carried out through data collected retrospectively in clinical records of patients treated in the Postgraduate Endodontics Clinic of the Andrés Bello University (UNAB) during 2019, 2020 and until March 2021. Results: A total of 569 patients were treated during the period, 118 patients were seen by first-year students and 451 by second-year students. The frequency of perforations in the first year was 0% and in the second year it was 2% (n=9). Considering the overall total number of patients, the relative frequency of perforations was only 1.6%. Regarding location, 3 perforations were in the cervical third of the root, 3 in the middle third, 2 in the apical third and 1 in the pulp chamber floor. No perforation resulted in the immediate indication of extraction and all were sealed with calcium silicate-based materials. Conclusions: Te frequency of root perforations by postgraduate students was very low, which could evidence the safety of institutional treatment and teaching protocols. The greatest occurrence of perforations was with second-year students, which can be attributed to the fact that they treat cases of greater complexity.

Reabilitação estética e funcional com resina composta após trauma dentário: relato de caso / Aesthetic and functional rehabilitation with composite resin after dental trauma: case report

As lesões dentárias traumáticas são um problema de saúde pública mundial, dentre as quais a fratura dentária é a de maior ocorrência, envolvendo principalmente os dentes anteriores. A abordagem de grandes fraturas anteriores é um desafio para cirurgiões dentistas de qualquer nível pois, além da função, afetam diretamente a estética do paciente, fazendo-se necessário um planejamento que envolva diferentes especialidades na odontologia. Objetivo: Relatar um caso clínico de reabilitação funcional e estética de fratura dentária nos incisivos centrais superiores envolvendo tratamento endodôntico, instalação de pino de fibra de vidro e restauração direta em resina composta. Relato de Caso: O paciente de 17 anos sofreu fratura nos incisivos centrais superiores causada por uma queda de bicicleta. Devido à busca tardia por tratamento o elemento 21 foi diagnosticado com necrose pulpar e, portanto, foi submetido à tratamento endodôntico pela Técnica Crown Down e reabilitação com pino de fibra de vidro Splendor-SAP. Posteriormente, os elementos 11 e 21 foram restaurados com facetas diretas em resina composta pela técnica incremental. Conclusão: A reabilitação com instalação de pino de fibra de vidro associada à técnica de estratificação incremental em resina composta se mostra como uma boa opção para reabilitação estética pois permite dar forma anatômica ao dente com riqueza de detalhes na estratificação da dentina e esmalte, além de máxima preservação da estrutura dental. Os resultados obtidos reforçam o sucesso estético e funcional com significativo impacto na qualidade de vida do paciente(AU)

Traumatic dental injuries are a worldwide public health problem, among which dental fractures are the most frequent, mainly involving the anterior teeth. The approach of large anterior fractures is a challenge for dental surgeons of any level because, in addition to function, they directly affect the patient's esthetics, requiring a plan that involves different specialties in dentistry. Objective: Report a clinical case of functional and aesthetic rehabilitation of dental fractures in maxillary central incisors involving endodontic treatment, installation of a fiberglass post and direct restoration in composite resin. Case Report: The 17-year-old patient suffered a fracture in the upper central incisors caused by a fall from a bicycle. Due to the late search for treatment, element 21 was diagnosed with pulp necrosis and, therefore, underwent endodontic treatment using the Crown Down Technique and rehabilitation with a Splendor-SAP fiberglass pin. Later, elements 11 and 21 were restored with direct veneers in composite resin using the incremental technique. Conclusion: Rehabilitation with the installation of a fiberglass post associated with the incremental layering technique in composite resin is a good option for aesthetic rehabilitation as it allows the anatomical shape of the tooth with rich details in the layering of dentin and enamel, in addition to maximum preservation of the tooth structure. The results obtained reinforce the aesthetic and functional success with a significant impact on the patient's quality of life(AU)

Spatio-temporal variation in the growth of coral fragments of opportunity in the Eastern Tropical Pacific: implications for coral reef restoration

Introduction: Coral-reef communities are considered one of the most biodiverse, but also most threatened, marine ecosystems, and the accelerating loss of habitat over the past decades warrants active intervention. Objective: The present study demonstrates the successful implementation of a low-impact restoration technique in three Central Mexican Pacific degraded coral communities, using a protocol based on natural fragmentation (''fragments of opportunity") of the branching coral Pocillopora spp., considered the most abundant and primary carbonate-producing coral species of the Eastern Tropical Pacific. Methods: The restoration program was implemented in two offshore and one inshore coraline areas. The relationships between seawater temperature and coral survival, growth, and attachment rate were assessed over one year, with 183 fragments monitored each month. Results: The mean coral growth rate was 3.3 ± 0.1 mm mo-1, with annual growth rates in length and width of 39.9 ± 14.2 and 36.5 ± 19.5 mm yr-1, respectively. Self-attachment efficiency was 78 % and the survival rate was high (84 %). The growth rate differed significantly among reefs. Conclusions: Upon monitoring directly fragmented corals over a year, growth rates were deemed high enough to merit active restoration in the region. However, our data show that structural and abiotic differences and seasonal variability must be considered overall in successful long-term coral community restoration initiatives in the eastern Pacific region.

Introducción: Las comunidades de arrecifes de coral se consideran uno de los ecosistemas marinos con mayor biodiversidad, pero también los más amenazados, y la pérdida acelerada de hábitat en las últimas décadas justifica la implementación de una intervención activa. Objetivo: El presente estudio demuestra la implementación exitosa de una técnica de restauración de bajo impacto basada en la fragmentación natural (''fragmentos de oportunidad") del coral ramificado Pocillopora spp., la cual es la especie coralina más abundante y principal productora de carbonato del Pacífico Oriental Tropical. Métodos: El programa de restauración se implementó en dos sitios lejos de la costa y un sitio cercano a la costa, con comunidades coralinas degradadas. Las relaciones entre la temperatura del agua de mar y la supervivencia, el crecimiento y la tasa de adhesión de los corales se evaluaron durante un año con 183 fragmentos monitoreados cada mes. Resultados: La tasa media de crecimiento coralino fue de 3.3 ± 0.1 mm mo-1, con tasas de crecimiento anual en largo y ancho de 39.9 ± 14.2 y 36.5 ± 19.5 mm año-1, respectivamente. La eficiencia de la auto-adherencia fue del 78 % y la tasa de supervivencia fue alta (84 %). La tasa de crecimiento difirió significativamente entre los arrecifes. Conclusiones: Al monitorear directamente los corales fragmentados durante un año, las tasas de crecimiento se consideraron lo suficientemente altas como para merecer una restauración activa en la región. Sin embargo, nuestros datos muestran que las diferencias estructurales y abióticas y la variabilidad estacional deben considerarse en general en las iniciativas exitosas de restauración de comunidades de coral a largo plazo en la región del Pacífico oriental.