On the understanding of zinc-oxide eugenol cement use prior to etch-rinse bonding strategies

Context: Zinc-oxide eugenol (ZOE) is frequently used due to its satisfactory biological response, sedative effect on the pulp, and easy removal. However, literature is very controversial about the influence of the temporary cement-containing eugenol on the bond strength properties. Aims: This study aims to clarify the literature controversy by evaluating the bond strength of ZOE or ZOE-free applied before bonding procedures and the 7-day resting period after the first session. Settings and Designs: Twelve recently extracted third molars were randomly divided into three groups: Group 1: Control (without treatment), Group 2: Temp-Bond NE; Group 3: Temp-Bond. Subjects and Methods: After temporary restorations, the teeth were immersed in distilled water and stored for 7 days at 37°C. The temporary cement was mechanically removed, and prophylaxis was performed. The adhesive procedures were performed, and a 6-mm-high composite resin block was built. The teeth were immediately stored at 100% relative humidity at 37°C for 24 hours. Specimens with 0.7 (±0.2) mm2 of cross-sectional area were obtained and subjected to a microtensile bond strength (μTBS) test at 1 mm/min until failure. Statistical Analysis Used: Analysis of variance (ANOVA) and Tukey's post hoc test were used for statistical analysis. Results: ZOE or ZOE-free cement did not interfere in the μTBS between resin composite and dentine when used with a two-step-etch-rinse adhesive material, considering 7 days of resting period after the first session, by the ANOVA and Tukey's post hoc test (P < 0.05). Conclusions: The authors recommend the removal of the temporary cementation at least seven days after the first session and suggest that the clinicians follow-up further studies to use the cement in case its removal is recommended within a longer period.

Effect of Using Nano and Micro Airborne Abrasive Particles on Bond Strength of Implant Abutment to Prosthesis

Connecting prostheses to the implant abutments has become a concern and achieving a satisfactory retention has been focused in cement-retention prostheses recently. Sandblasting is a method to make a roughened surface for providing more retention. The aim of this study was to compare effects of nano and micro airborne abrasive particles (ABAP) in roughening surface of implant abutments and further retention of cemented copings. Thirty Xive abutments and analogues (4.5 D GH1) were mounted vertically in self-cured acrylic blocks. Full metal Ni-Cr copings with a loop on the top were fabricated with appropriate marginal adaptation for each abutment. All samples were divided into 3 groups: first group (MPS) was sandblasted with 50 µm Al2O3 micro ABAP, second group (NSP) was sandblasted with 80 nm Al2O3 nano ABAP, and the third group (C) was assumed as control. The samples were cemented with provisional cement (Temp Bond) and tensile bond strength of cemented copings was evaluated by a universal testing machine after thermic cycling. The t test for independent samples was used for statistical analysis by SPSS software (version 15) at the significant level of 0.05. Final result showed significant difference among all groups (p<0.001) and MPS manifested the highest mean retention (207.88±45.61 N) with significant difference among other groups (p<0.001). The control group showed the lowest bond strength as predicted (48.95±10.44 N). Using nano or micro ABAP is an efficient way for increasing bond strengths significantly, but it seems that micro ABAP was more effective.

A conexão das próteses nos pilares dos implantes dentários é um fator de preocupação e a obtenção de uma retenção satisfatória tem sido objeto de estudos recentes em próteses com retenção cementária. O jateamento é um método de obter uma superfície áspera para aumentar a retenção. O objetivo do presente estudo foi comparar os efeitos de jateamento com nano- e micropartículas abrasivas para tornar áspera a superfície dos pilares de implantes e a consequente aumentar a retenção dos copings cimentados. Trinta pilares Xive com seus análogos (4.5 D GH1) foram montados na posição vertical em blocos de acrílico auto-polimerizados. Copings metálicos de Ni-Cr com uma alça no topo foram feitos com adaptação marginal apropriada para cada pilar. Todas as amostras foram divididas em três grupos: o 1° grupo (MPS) foi jateado com micropartículas de Al2O3 com 50 µm de tamanho médio; o 2° grupo (NPS) foi jateado com nanopartículas de Al2O3 com 80 nm de tamanho médio; e o 3° grupo (C) foi considerado controle. As amostras foram cimentadas com cimento provisório (Temp Bond) e a resistência à tração dos copings cimentados foi avaliada em máquina universal de ensaios após processo de termociclagem. O teste t para amostras independentes foi usado para fins de análise estatística empregando-se o software SPSS v. 15, com nível de significância de 0,05. Os resultados demonstraram diferença significante entre todos os grupos (p<0,001) e o grupo MPS mostrou o maior valor médio de resistência de união (207,88±45,61 N) com diferenças significantes em relação aos outros grupos (p<0,001). Conforme previsto, o grupo controle obteve o menor valor de resistência (48,95±10,44 N). O jateamento com micro ou nano partículas mostrou-se um modo eficaz de aumentar significativamente a resistência de união, mas aparentemente as micropartículas são mais eficazes.

The Effect Of Temporary Cement And Desensitizer On The Bond Strength Of Luting Cements / 대한치과보철학회지

This study investigated the effect of temporary cement and desensitizer on the bond strength of luting cements. Total 96 dentin specimens were divided into two groups with and without temporary cementation. For temporary cement-treated group, specimens were cemented with Temp-bond(R) and all specimens were stored in distilled water at 37 celsius degrees for 7 days. Each group was further divided into 3 subgroups with Gluma(R), One-step(R) application and without desensitizer. After desensitizer application, Ni-Cr specimens were luted to dentin surface with Panavia-F(R) and Vitremer(R). Specimens were placed in distilled water at 37 celsius degrees for 24 hours and shear bond strength between metal and dentin was measured by a universal testing machine. The results were as follows: 1. In Panavia-F(R) cemented groups, the combination of One-step(R) without temporary cement showed the greatest strength. Among the desensitizer types, One-step(R) showed the highest bond strength, followed by No-desensitizer, Gluma(R). 2. In Vitremer(R) cemented groups, the combination of no temporary cement and without desensitizer showed the greatest bond strength. Among the desensitizer types, No-desensitizer group showed the highest bond strength. 3. The use of Gluma(R) significantly reduced the shear bond strength in Panavia-F(R) and Vitremer(R) groups. 4. All temporary cement-treated groups showed a significant lower shear bond strength than without temporary cement groups. 5. Desensitizer application significantly influenced the bond strength of the resin cement and resin modified glass ionomer cement.