Mechanism and application in tissue engineering of the active ingredient of Drynariae Rhizoma promoting bone defect repair / 中国药房

Bone defect has always been a major clinical challenge because of its great difficulty and long period of treatment. Drynariae Rhizoma is a commonly used medicine in osteology and traumatology of traditional Chinese medicine， and its active ingredients（mainly flavonoids） facilitate osteoblast differentiation of bone marrow mesenchymal stem cells， osteoclast proliferation， vascular-osteogenic coupling， and inhibit osteoclast activity to promote bone mineralization， and repair and reconstruction of bone defect. As a good substitute for bone regeneration drugs， the active constituents of Drynariae Rhizoma can be loaded on scaffold materials of tissue engineering， which greatly improves the bioavailability of the drug. Meanwhile， the sustained-release microspheres also solve some problems such as sudden drug release from the scaffolds， and the composite scaffolds with active ingredient of Drynariae Rhizoma prepared by them have good ossification activity and osteoinduction， with precise bone repair effects， which meet the diverse performance requirements of bone grafts and have a promising clinical application prospect.

Reconstruction of rat calvarial defects utilizing an ultraviolet-cured hydrogel loaded with bone marrow mesenchymal stem cells / 口腔疾病防治

Objective@#To investigate the osteogenic properties of a methacrylated gelatin (GelMA) / bone marrow mesenchymal stem cells (BMSCs) composite hydrogel applied to the skull defect area of rats and to provide an experimental basis for the development of bone regeneration biomaterials.@*Methods@#This study was approved by the Animal Ethics Committee of Nanjing University. A novel photocurable composite biohydrogel was developed by constructing photoinitiators [lthium phenyl (2,4,6-trimethylbenzoyl) phosphinate, LAP], GelMA, and BMSCs. The surface morphology and elemental composition of the gel were examined using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). The compressive strength of the gel was evaluated using an electronic universal testing machine. After in vitro culture for 1, 2, and 5 days, the proliferation of the BMSCs in the hydrogels was assessed using a CCK-8 assay, and their survival and morphology were examined through confocal microscopy. A 5 mm critical bone deficiency model was generated in a rat skull. The group receiving composite hydrogel treatment was referred to as the GelMA/BMSCs group, whereas the untreated group served as the control group. At the 4th and 8th weeks, micro-CT scans were taken to measure the bone defect area and new bone index, while at the 8th week, skull samples from the defect area were subjected to H&E staining, van Gieson staining, and Goldner staining to evaluate the quality of bone regeneration and new bone formation.@*Results@#SEM observed that the solidified GelMA showed a 3D spongy gel network with uniform morphology, the porosity of GelMA was 73.41% and the pore size of GelMA was (28.75 ± 7.13) μm. EDX results showed that C and O were evenly distributed in the network macroporous structure of hydrogel. The hydrogel compression strength was 152 kPa. On the 5th day of GelMA/BMSCs culture, the cellular morphology transitioned from oval to spindle shaped under microscopic observation, accompanied by a significant increase in cell proliferation (159.4%, as determined by the CCK-8 assay). At 4 weeks after surgery, a 3D reconstructed micro-CT image revealed a minimal reduction in bone defect size within the control group and abundant new bone formation in the GelMA/BMSCs group. At 8 weeks after surgery, no significant changes were observed in the control group's bone defect area, with only limited evidence of new bone growth; however, substantial healing of skull defects was evident in the GelMA/BMSCs group. Quantitative analysis at both the 4- and 8-week examinations indicated significant improvements in the new bone volume (BV), new bone volume/total bone volume (BV/TV), bone surface (BS), and bone surface/total bone volume (BS/TV) in the GelMA/BMSCs group compared to those in the control group (P<0.05). Histological staining showed continuous and dense formation of bone tissue within the defects in the GelMA/BMSCs group and only sporadic formation of new bone, primarily consisting of fibrous connective tissue, at the defect edge in the control group.@*Conclusion@#Photocuring hydrogel-based stem cell therapy exhibits favorable biosafety profiles and has potential for clinical application by inducing new bone formation and promoting maturation within rat skull defects.

3D printed Mg-incorporated polycaprolactone scaffolds for repairing rat skull defects / 口腔疾病防治

Objective@#To evaluate the bone repair effect of 3D-printed magnesium (Mg)-loaded polycaprolactone (PCL) scaffolds in a rat skull defect model.@*Methods@#PCL scaffolds mixed with Mg microparticles were prepared by using 3D printing technology, as were pure PCL scaffolds. The surface morphologies of the two scaffolds were observed by scanning electron microscopy (SEM), and the surface elemental composition was analyzed via energy dispersive spectroscopy (EDS). The physical properties of the scaffolds were characterized through contact angle measurements and an electronic universal testing machine. This study has been reviewed and approved by the Ethics Committee. A critical size defect model was established in the skull of 15 Sprague-Dawley (SD) rats, which were divided into the PCL group, PCL-Mg group, and untreated group, with 5 rats in each group. Micro-CT scanning was performed to detect and analyze skull defect healing at 4 and 8 weeks after surgery, and samples from the skull defect area and major organs of the rats were obtained for histological staining at 8 weeks after surgery.@*Results@#The scaffolds had a pore size of (480 ± 25) μm, a fiber diameter of (300 ± 25) μm, and a porosity of approximately 66%. The PCL-Mg scaffolds contained 1.0 At% Mg, indicating successful incorporation of Mg microparticles. The contact angle of the PCL-Mg scaffolds was 68.97° ± 1.39°, indicating improved wettability compared to that of pure PCL scaffolds. Additionally, compared with that of pure PCL scaffolds, the compressive modulus of the PCL-Mg scaffolds was (57.37 ± 8.33) MPa, demonstrating enhanced strength. The PCL-Mg group exhibited the best bone formation behavior in the skull defect area compared with the control group and PCL group at 4 and 8 weeks after surgery. Moreover, quantitative parameters, such as bone volume (BV), bone volume/total volume (BV/TV), bone surface (BS), bone surface/total volume (BS/TV), trabecular thickness (Tb.Th), trabecular number (Tb.N) and bone mineral density (BMD), of skull defects were better than those in the other groups, indicating the best bone regeneration effect. H&E, Goldner, and VG staining revealed more mineralized new bone formation in the PCL-Mg group than in the other groups, and H&E staining of the major organs revealed good biosafety of the material.@*Conclusion@#PCL-Mg scaffolds can promote the repair of bone defects and have clinical potential as a new scaffold material for the repair of maxillofacial bone defects.

Research progress on dedifferentiated fat cells and their application in oral and maxillofacial bone tissue engineering / 口腔疾病防治

@#The identification of suitable seed cells represents a critical scientific problem to be solved in the field of oral and maxillofacial bone tissue regeneration. The application of adipose-derived stem cells (ASCs) in tissue and organ repair and regeneration has been studied extensively. In recent years, dedifferentiated fat (DFAT) cells have also shown broad application prospects in the field of bone tissue engineering. DFAT cells express stem cell-related markers and have the potential to differentiate into adipocytes, osteoblasts, chondrocytes, nerve cells, cardiomyocytes and endothelial cells. In addition, DFAT cells also have the advantages of minimally invasive acquisition, strong proliferation and high homogeneity. Currently, all studies involving the application of DFAT cells in scaffold-based and scaffold-free bone tissue engineering can confirm their effectiveness in promoting bone regeneration. However, cytological research still faces some challenges, including relatively low cell culture purity, unclear phenotypic characteristics and undefined dedifferentiation mechanisms. It is believed that with the continuous development and improvement of isolation, culture, identification and directional induction of osteogenic differentiation methods, DFAT cells are expected to become excellent seed cells in the field of oral and maxillofacial bone tissue engineering in the future.

Research advances on stem cell-based treatments in animal studies and clinical trials of lymphedema / 中国修复重建外科杂志

OBJECTIVE@#To summarize the progress of the roles and mechanisms of various types of stem cell-based treatments and their combination therapies in both animal studies and clinical trials of lymphedema.@*METHODS@#The literature on stem cell-based treatments for lymphedema in recent years at home and abroad was extensively reviewed, and the animal studies and clinical trials on different types of stem cells for lymphedema were summarized.@*RESULTS@#Various types of stem cells have shown certain effects in animal studies and clinical trials on the treatment of lymphedema, mainly through local differentiation into lymphoid endothelial cells and paracrine cytokines with different functions. Current research focuses on two cell types, adipose derived stem cells and bone marrow mesenchymal stem cells, both of which have their own advantages and disadvantages, mainly reflected in the therapeutic effect of stem cells, the difficulty of obtaining stem cells and the content in vivo. In addition, stem cells can also play a synergistic role in combination with other treatments, such as conservative treatment, surgical intervention, cytokines, biological scaffolds, and so on. However, it is still limited to the basic research stage, and only a small number of studies have completed clinical trials.@*CONCLUSION@#Stem cells have great transformation potential in the treatment of lymphedema, but there is no unified standard in the selection of cell types, the amount of transplanted cells, and the timing of transplantation.

Advances in corneal stromal regeneration and repair / 国际眼科杂志(Guoji Yanke Zazhi)

Corneal stroma is a significant part of the cornea and plays a significant role in the eye's refractive system. Although corneal transplantation is now the most effective treatment for corneal stromal disease, its advancement has been constrained by a shortage of donors, the need for prolonged immunosuppressive medicine to prevent rejection, and low graft survival rates. An alternate strategy is to use the corneal stroma's natural capacity for regeneration to create the ideal conditions for the collagenous extracellular matrix of the stroma to self-renew. However, it is challenging to replicate the intricate ultrastructure of the corneal stroma in vitro. Regenerative medicine has so been used to address these issues. These approaches refer to numerous disciplines, including stem cell-induced differentiation, tissue engineering and gene editing. This article provides potential directions for the future clinical applications of corneal stromal regeneration and repair while summarizing pertinent techniques, research progress, and issues.

Unlocking the potential of amorphous calcium carbonate: A star ascending in the realm of biomedical application

Calcium-based biomaterials have been intensively studied in the field of drug delivery owing to their excellent biocompatibility and biodegradability. Calcium-based materials can also deliver contrast agents, which can enhance real-time imaging and exert a Ca2+-interfering therapeutic effect. Based on these characteristics, amorphous calcium carbonate (ACC), as a brunch of calcium-based biomaterials, has the potential to become a widely used biomaterial. Highly functional ACC can be either discovered in natural organisms or obtained by chemical synthesis However, the standalone presence of ACC is unstable in vivo. Additives are required to be used as stabilizers or core-shell structures formed by permeable layers or lipids with modified molecules constructed to maintain the stability of ACC until the ACC carrier reaches its destination. ACC has high chemical instability and can produce biocompatible products when exposed to an acidic condition in vivo, such as Ca2+ with an immune-regulating ability and CO2 with an imaging-enhancing ability. Owing to these characteristics, ACC has been studied for self-sacrificing templates of carrier construction, targeted delivery of oncology drugs, immunomodulation, tumor imaging, tissue engineering, and calcium supplementation. Emphasis in this paper has been placed on the origin, structural features, and multiple applications of ACC. Meanwhile, ACC faces many challenges in clinical translation, and long-term basic research is required to overcome these challenges. We hope that this study will contribute to future innovative research on ACC.

A Review on the Advances of Biocompatible Materials and Their Processing Via Additive Manufacturing for Tissue Engineering Applications / Una Revisión de los Avances en Materiales Biocompatibles y su Procesamiento Mediante Manufactura Aditiva Para Aplicaciones en Ingeniería de Tejidos

Abstract: About two decades ago, medicine experienced a revolutionary approach, driven by technological development in manufacturing techniques and scientific advances in the medical and life sciences, the field took on the challenge of regenerating tissue and organs damaged by disease, trauma, or hereditary issues, incorporating additive manufacturing as one of its strategies. Since its inception, regenerative medicine has developed techniques like tissue engineering, cellular therapy, medical devices, and artificial organs to provide wound healing and orthopedic applications. The incorporation of additive manufacturing allowed to recreate biologically appropriate environments for cell reproduction and growth that, eventually, lead to useful, regenerated tissue or organs. The objective of the present work is to review recent advances in the application of additive manufacturing techniques and ad hoc biomaterials in the field of regenerative medicine, to determine their impact in the development of new therapies for tissue engineering.

Resumen: Hace aproximadamente dos décadas, la medicina experimentó un enfoque revolucionario, impulsado por el desarrollo tecnológico en técnicas de fabricación y los avances científicos en las ciencias médicas y de la vida. El campo asumió el desafío de regenerar tejidos y órganos dañados por enfermedades, traumatismos o problemas hereditarios, incorporando la fabricación aditiva como una de sus estrategias. Desde su inicio, la medicina regenerativa ha desarrollado técnicas como la ingeniería de tejidos, la terapia celular, los dispositivos médicos y los órganos artificiales para proporcionar cicatrización de heridas y aplicaciones ortopédicas. La incorporación de la fabricación aditiva ha permitido recrear entornos biológicamente apropiados para la reproducción y crecimiento celular, lo que eventualmente ha llevado a la obtención de tejidos u órganos regenerados útiles. El objetivo de este trabajo es revisar los avances recientes en la aplicación de técnicas de fabricación aditiva y biomateriales ad hoc en el campo de la medicina regenerativa, para determinar su impacto en el desarrollo de nuevas terapias para la ingeniería de tejidos.

Novel Therapy for Acquired Tracheomalacia with a Tissue-Engineered Extraluminal Tracheal Splint and Autologous Mesenchymal-Derived Chondrocytes

Abstract Introduction Acquired tracheomalacia (ATM) is characterized by a loss of structural strength of the tracheal framework, resulting in airway collapse during breathing. Near half of the patients undergoing prolonged invasive mechanical ventilation will suffer tracheal lesions. Treatment for ATM includes external splinting with rib grafts, prosthetic materials, and tracheal resection. Failure in the use of prosthetic materials has made reconsidering natural origin scaffolds and tissue engineering as a suitable alternative. Objective To restore adequate airway patency in an ovine model with surgicallyinduced ATM employing a tissue-engineered extraluminal tracheal splint (TE-ETS). Methods In the present prospective pilot study, tracheal rings were partially resected to induce airway collapse in 16 Suffolk sheep (Ovis aries). The TE-ETS was developed with autologous mesenchymal-derived chondrocytes and allogenic decellularized tracheal segments and was implanted above debilitated tracheal rings. The animals were followed-up at 8, 12, and 16 weeks and at 1-year postinsertion. Flexible tracheoscopies were performed at each stage. After sacrifice, a histopathological study of the trachea and the splint were performed. Results The TE-ETS prevented airway collapse for 16 weeks and up to 1-year postinsertion. Tracheoscopies revealed a noncollapsing airway during inspiration. Histopathological analyses showed the organization of mesenchymal-derived chondrocytes in lacunae, the proliferation of blood vessels, and recovery of epithelial tissue subjacent to the splint. Splints without autologous cells did not prevent airway collapse. Conclusion It is possible to treat acquired tracheomalacia with TE-ETS without further surgical removal since it undergoes physiological degradation. The present study supports the development of tissue-engineered tracheal substitutes for airway disease.

Preparation and Performance of Three-Dimensional Silk FibroinScaffolds with Different Matrix Stiffness / 医用生物力学

Objective After hydrogen bonding between collagen ( COL) and silk fibroin ( SF ) at different concentrations, a composite scaffold with adjustable stiffness was prepared by combining with gel system, and its physical and chemical properties were characterized. Methods SF with different qualities was dissolved in sodium alginate (SA) solution, then COL solution at different concentration and calcium carbonate ( CaCO3 ) powder were added. The hydrogels of SC1, SC2, and SC3 groups were obtained by taking out the mixed solution and adding some gluconic acid lactone ( GDL) powder, and different SF scaffolds were obtained after freeze drying. Results The SF scaffolds with adjustable stiffness were successfully prepared. The compression moduli of SC1, SC2, and SC3 groups were (17. 31±2. 73), (24. 12±1. 81), (32. 54±1. 81) kPa, respectively. The innerstructure of the scaffolds was observed. From SC1 group to SC3 group, pores of the scaffolds were smaller and fewer, and hydrophilicity of the materials become better and better. Conclusions Three-dimensional ( 3D) porous scaffolds with different matrix stiffness can be prepared by changing the concentration of SF and COL solution. The concentration of SF and COL is proportional to the compression modulus, water absorption, water retention and swelling rate of SF scaffolds, while inversely proportional to porosity. The findings of this study are expected to provide theoretical guidance for construction of scaffolds with appropriate matrix stiffness for inducing osteogenic differentiation of mesenchymal stem cells

Research progress of periodontal tissue regeneration by combined biomaterials of dental derived mesenchymal stem cells / 口腔医学

@#The ultimate treatment goal of periodontitis is the structural and functional regeneration of periodontium. However, existing methods for periodontal regeneration have difficulties in regenerating the hierarchical structure. Therefore, stem cell-based tissue engineering has attracted more and more attention for its advantages of self-renewal and multi-lineage differentiation potential. This review summarized the progress of research on periodontal tissue regeneration by combined biomaterials of dental-derived stem cells. It is pointed out that the application of autologous stem cell transplantation is limited by the donor source, and the subsequent research should focus on the development of multi-phase scaffold materials and the attempt to establish a stem cell bank.

Recent advances of acellular cartilage matrix in cartilage regeneration / 中华骨科杂志

Osteoarthritis is a common degenerative joint disease, and cartilage damage is often considered an early factor in irreversible joint degeneration. Repairing damaged cartilage remains a medical challenge due to its limited ability to self-repair and regenerate. In recent years, the application of tissue engineering strategies to treat cartilage defects has been recognized as an emerging therapeutic avenue. Acellular cartilage matrix (ACM) is an ideal material for cartilage repair and regeneration as it retains the extracellular matrix structure and bioactive components of natural cartilage, mimicking the extracellular environment of natural cartilage to the greatest extent. Type II collagen is the main type of hyaline cartilage and plays an important role in regulating the mechanical properties of cartilage tissue. It has been shown that type II collagen, growth factors and the hypoxic microenvironment play important roles in promoting cartilage regeneration. Type II collagen induces cell aggregation and chondrogenic differentiation in a specific way; Various growth factors contained in the ACM induce Sox9 expression and promote chondrogenic differentiation of stem cells; The hypoxic microenvironment upregulates the expression of type II collagen (COL2A1), Sox9 and maintains chondrocyte phenotype. In addition, ACM has been widely used in cartilage regeneration studies, either as a decellularized scaffold, hydrogel or 3D bioprinting technique for the repair of defective cartilage. Although the ACM-derived biomaterials discussed in this paper have many advantages, there are still some difficulties in their practical applications, such as loss of ACM components and reduced scaffold performance, which are still worth exploring in depth.

Research progress in the role of mesenchymal stem cell sheets and their derivatives in bone defect repair / 中华创伤杂志

Bone defects are mostly caused by severe trauma, infection, tumor resection and congenital malformations, which adversely affect their health and quality of life. So far, the bone defects are mainly filled with autologous or allogeneic bone grafting, which has problems such as donor shortage, secondary bone injury and scarring. In recent years, the rise of bone tissue engineering has provided a new way for repair of bone defects, in which mesenchymal stem cell (MSC) sheets prepared by using the principle of tissue engineering can well solve the above problems of autologous or allogeneic bone grafting. With the development of preparation technology, new bone defect repair materials such as decellularized extracellular matrix (ECM) sheets and MSC/ECM clumps have been derived on the basis of MSC sheets. Therefore, the authors reviewed the preparation and the role of MSC sheets and their derivatives in bone defect repair, hoping to provide a reference for basic research and clinical treatment related to bone defect repair.

Progress of research on application of chondroitin sulfate in osteogenic repair materials / 口腔医学

@#Chondroitin sulfate is an important component of extracellular matrix (ECM) in animal and human body. In recent years, chondroitin sulfate has been proven to have potential efficacy in biomedical application and has been widely used in bone regeneration and osteogenesis, especially in craniofacial reconstruction and dental medicine. Research shows that chondroitin sulfate derivatives and chondroitin sulfate composite scaffolds have great potential in promoting osteogenesis and biomineralization. However, due to the variety of chondroitin sulfate and various application forms, study on its mechanism of osteogenic repair is still insufficient. In this paper, biological characteristics, bone regeneration and osteogenesis of chondroitin sulfate, its application in different biomaterial design and future prospect are discussed.

Research progress of polymer self-healing mechanism and its application in biomedicine / 药学学报

Polymer self-healing is mainly based on the molecular structure and interaction of polymers, and some need external stimulation, such as light, heat, pH, etc. In recent years, many studies have found that the self-healing properties of polymers can prolong the life of materials, while maintaining the mechanical properties of polymers after healing. According to the different action modes of polymer materials, it can be divided into autonomous self-healing and non-autonomous self-healing. Among them, autonomous self-healing mainly works through reversible covalent bonds (Schiff base bond, Diels-Alder reaction, hydrazide bond), reversible non-covalent bonds (hydrogen bond, metal-ligand coordination bond, electrostatic interaction, π-π stacking interaction, hydrophobic interaction) and a combination of the two interactions. Drug carriers with unique self-healing properties play an important role in the encapsulation and stable release of biomacromolecules. In this review, the self-healing mechanism of polymers and their applications in the field of biomedicine were briefly summarized and discussed.

Progress in the application of patch materials in cardiovascular surgery / 中南大学学报(医学版)

The cardiovascular patch, served as artificial graft materials to replace heart or vascular tissue defect, is still playing a key role in cardiovascular surgeries. The defects of traditional cardiovascular patch materials may determine its unsatisfactory long-term effect or fatal complications after surgery. Recent studies on many new materials (such as tissue engineered materials, three-dimensional printed materials, etc) are being developed. Patch materials have been widely used in clinical procedures of cardiovascular surgeries such as angioplasty, cardiac atrioventricular wall or atrioventricular septum repair, and valve replacement. The clinical demand for better cardiovascular patch materials is still urgent. However, the cardiovascular patch materials need to adapt to normal coagulation mechanism and durability, promote short-term endothelialization after surgery, and inhibit long-term postoperative intimal hyperplasia, its research and development process is relatively complicated. Understanding the characteristics of various cardiovascular patch materials and their application in cardiovascular surgeries is important for the selection of new clinical surgical materials and the development of cardiovascular patch materials.

Effect of pH on the chelation between strontium ions and decellularized small intestinal submucosal sponge scaffolds / 北京大学学报(医学版)

OBJECTIVE@#To investigate the preparation of decellularized small intestinal submucosa (dSIS) sponge scaffolds with chelated strontium (Sr) ions at different pH values, and to select the appropriate pH values for synthesizing Sr/dSIS scaffolds using the physicochemical properties and biocompatibility of the scaffolds as evaluation indexes.@*METHODS@#(1) Sr/dSIS scaffolds preparation and grouping: After mixing dSIS solution and strontium chloride solution in equal volumes, adjusting pH of the solution to 3, 5, 7, and 9 respectively, porous scaffolds were prepared by freeze-drying method after full reaction at 37℃, which were named Sr/dSIS-3, -5, -7, and -9 respectively, and the dSIS scaffolds were used as the control group. (2) Physicochemical property evaluation: The bulk morphology of the scaffolds was observed in each group, the microscopic morphology analyzed by scanning electron microscopy, and the porosity and pore size determined, the surface elements analyzed by energy spectroscopy, the structure of functional groups analyzed by infrared spectroscopy, the chelation rate determined by atomic spectrophotometry, the water absorption rate detected by using specific gravity method, and the compression strength evaluated by universal mechanical testing machine.(3) Biocompatibility evaluation: The cytotoxicity and proliferative effect to bone mesenchymal stem cells (BMSCs) of each group were evaluated by Calcein-AM/PI double staining method.@*RESULTS@#Scanning electron microscopy showed that the scaffolds of each group had an interconnected three-dimensional porous structure with no statistical difference in pore size and porosity. Energy spectrum analysis showed that strontium could be detected in Sr/dSIS-5, -7 and -9 groups, and strontium was uniformly distributed in the scaffolds. Functional group analysis further supported the formation of chelates in the Sr/dSIS-5, -7 and -9 groups. Chelation rate analysis showed that the Sr/dSIS-7 group had the highest strontium chelation rate, which was statistically different from the other groups (P < 0.05). The scaffolds in all the groups had good water absorption. The scaffolds in Sr/dSIS-5, -7 and -9 groups showed significantly improved mechanical properties compared with the control group (P < 0.05). The scaffolds in all the groups had good biocompatibility, and the Sr/dSIS-7 group showed the best proliferation of BMSCs.@*CONCLUSION@#When pH was 7, the Sr/dSIS scaffolds showed the highest strontium chelation rate and the best proliferation effect of BMSCs, which was the ideal pH value for the preparation of the Sr/dSIS scaffolds.

Adipose tissue-derived stem cells as a therapeutic strategy for enterocutaneous fistula: an experimental model study

ABSTRACT Purpose: Enterocutaneous fistula (ECF) is a condition in which there is an abnormal connection between the intestinal tract and the skin. It can lead to high morbidity and mortality rates despite the availability of therapeutic options. Stem cells have emerged as a potential strategy to treat ECF. This study aimed to evaluate the effect of adipose tissue-derived stem cells (ASC) on ECF in an experimental model. Methods: ECF was induced in 21 Wistar rats, and after one month, they were divided into three groups: control group (C), culture medium without ASC group (CM), and allogeneic ASC group (ASC). After 30 days, the animals underwent macroscopic analysis of ECF diameter and histopathological analysis of inflammatory cells, tissue fibrosis, and vascular density. Results: The study found a 55% decrease in the ECF diameter in the ASC group (4.5 ± 1.4 mm) compared to the control group (10.0 ± 2.1 mm, p = 0.001) and a 59.1% decrease in the CM group (11.0 ± 4.3 mm, p = 0.003). The fibrosis score in the ASC group was 20.9% lower than the control group (p = 0.03). There were no significant differences in inflammation scores among the three groups. Conclusions: This study suggests that ASC treatment can reduce ECF diameter, and reduction in tissue fibrosis may be a related mechanism. Further studies are needed to understand the underlying mechanisms fully.

Research status and prospect of tissue engineering technology in treatment of atrophic rhinitis / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress of the feasibility of a new treatment method for atrophic rhinitis (ATR) based on tissue engineering technology (seed cells, scaffold materials, and growth factors), and provide new ideas for the treatment of ATR.@*METHODS@#The literature related to ATR was extensively reviewed. Focusing on the three aspects of seed cells, scaffold materials, and growth factors, the recent research progress of ATR treatment was reviewed, and the future directions of tissue engineering technology to treat ATR were proposed.@*RESULTS@#The pathogenesis and etiology of ATR are still unclear, and the effectiveness of the current treatments are still unsatisfactory. The construction of a cell-scaffold complex with sustained and controlled release of exogenous cytokines is expected to reverse the pathological changes of ATR, promoting the regeneration of normal nasal mucosa and reconstructing the atrophic turbinate. In recent years, the research progress of exosomes, three-dimensional printing, and organoids will promote the development of tissue engineering technology for ATR.@*CONCLUSION@#Tissue engineering technology can provide a new treatment method for ATR.

Research progress on biocomposites based on bioactive glass / 生物医学工程学杂志

Bioactive glass (BG) has been widely used in the preparation of artificial bone scaffolds due to its excellent biological properties and non-cytotoxicity, which can promote bone and soft tissue regeneration. However, due to the brittleness, poor mechanical strength, easy agglomeration and uncontrollable structure of glass material, its application in various fields is limited. In this regard, most current researches mainly focus on mixing BG with organic or inorganic materials by freeze-drying method, sol-gel method, etc., to improve its mechanical properties and brittleness, so as to increase its clinical application and expand its application field. This review introduces the combination of BG with natural organic materials, metallic materials and non-metallic materials, and demonstrates the latest technology and future prospects of BG composite materials through the development of scaffolds, injectable fillers, membranes, hydrogels and coatings. The previous studies show that the addition of BG improves the mechanical properties, biological activity and regeneration potential of the composites, and broadens the application of BG in the field of bone tissue engineering. By reviewing the recent BG researches on bone regeneration, the research potential of new materials is demonstrated, in order to provide a reference for future related research.