Electro-removal of copper, chromium, and arsenic from chromated copper arsenate treated waste wood / Eletro-remoção de cobre, cromo e arsênico de resíduos de madeira tratada com arseniato de cobre cromado

ABSTRACT Wood is a renewable material considered eco-friendly and used for various purposes. While wood treated with chromated copper arsenate (CCA) does not deteriorate, its final disposal may entail risks due to the concentration and toxicity of the components. The removal of CCA from wood can be achieved in different ways. This study focuses on the reduction of the concentrations of Cu, Cr, and As chemical species by the electro-removal technique, aiming to obtain biomass with low deleterious potential that would allow multiple uses or safe disposal in landfills. The analytical results showed reductions of 79.5, 87.4, and 81.3% in the mean concentrations of Cu, Cr, and As, respectively. It is worth mentioning the occurrence of the fungus Xylaria sp. after treatment 6 (60 min, 5 g, and 25 V), further suggesting that the method was effective. Samples of these fungi were identified from isolates by culture in medium, DNA extraction, and sequencing of the Internal Transcribed Spacer (ITS) region.

RESUMO A madeira é um material renovável, considerado ecologicamente correto e utilizado para diversos fins. Embora a madeira tratada com arseniato de cobre cromado (CCA) não se deteriore facilmente, seu descarte final pode acarretar riscos devido à concentração e toxicidade dos componentes. A remoção do CCA da madeira pode ser realizada de diferentes maneiras. Este estudo teve como foco a redução das concentrações de espécies químicas Cu, Cr e As pela técnica de eletro-remoção, visando obter uma biomassa com baixo potencial deletério que permitiria múltiplos usos ou disposição final segura em aterros sanitários. Os resultados analíticos mostraram reduções de 79,5; 87,4 e 81,3% nas concentrações médias de Cu, Cr e As, respectivamente. Vale ressaltar a ocorrência do fungo Xylaria sp. após o tratamento 6 (60 min, 5 g e 25 V), sugerindo ainda que o método foi eficaz. Amostras desses fungos foram identificadas dos isolados por meio de cultura em meio, extração de DNA e sequenciamento da região do espaçador transcrito interno (ITS).

Determination of Lead, Arsenic and Mercury in Cream Cosmetics by Total Reflection X-Ray Fluorescence Spectrometry Using Suspension Sampling / 分析化学

A method for the determination of trace elements such as lead, arsenic and mercury in cream cosmetics by total reflection X-ray fluorescence spectrometry (TXRF) with suspension sampling was developed. The mixed solvents of water,tetrahydrofuran,methanol and were used to disperse paste, cream, and additives of triton X-100 to promote the test liquid uniform. The test suspension fluid were taken into the sample carrier,drying and then introduced into TXRF. Poly(1-vinylpyrrolidone-co-vinyl acetate) (P(VP-co-VAc)) was added to curing sediments,inhibiting proliferation. Triton X-100 and P(VP-co-VAc) were found to have the function of reducing mercury loss in the drying process. The loss of elements in the drying process and the effect of triton X-100 and P(VP-co-VAc) were investigated. The effect of cream matrix, element interference, spectral line and the inner standard were discussed. The calibration curves for quantitative analysis were established using matrix standards, so the error of software decomposition peak and the error caused by thick sample were avoided within a certain range. In this work,the linear correlation coefficients of Pb,As and Hg calibration curve were greater than 0.998 The detection limit of Pb,As and Hg in the solution were 0.005,0.004 and 0.006 μg/mL,respectively. Relative standard diviations(RSDs, n=11) of Pb, As and Hg were 7.8%-14.9%,6.6%-13.3% and 7.6%-14.6% respectively. The results of Pb, As, and Hg in cream cosmetics determinated by this method agreed with those obtained from inductively coupled plasma atomic emission spectrometry and the value of standard reference material. The TXRF method was proved to be accurate,simple and valuable in determination of trace heavy metal ions in cosmetic samples.

Study on Copper Absorption, Accumulation and Tolerance Mechanism of Alfalfa / 分析化学

To reveal the mechanism of Cu enrichment of alfalfa, in-situ micro-X-ray fluorescence spectrometry (μ-XRF) and fractional extraction were used to explore in-situ Cu distribution information in alfalfa seedlings and different combination forms of Cu in organs.The results showed that alfalfa roots were enriched with Cu up to 12.06 mg/g, which was 8 times of stem and 4.9 times of leaves.The in-situ μ-XRF result showed that the root of alfalfa was the main site of enrichment of Cu, and there was a barrier of Cu at the rhizome junction to alleviate the toxic effect of excess Cu on the shoots.Excess Cu (more than 50 μmol/L) also inhibited the uptake of Zn and Ca in alfalfa, enhanced the uptake of Fe in alfalfa, but had no obvious effect on the uptake of K and Mn.Plant fractional extraction showed that the Cu in root cells was mainly fixed in the form of insoluble residues (41%) and cell wall chelate (20%), while in the stem, Cu existed as four forms including hydrophobic protein binding, cell wall binding state, residual state and water-soluble state, which further reduce the excess transport of Cu to the leaves.In the leaves, excess Cu in the leaf cells was mainly in the vacuole and insoluble residue to achieve tolerance and detoxification to Cu.

In Vitro assessment of dentin erosion after immersion in acidic beverages: surface profile analysis and energy-dispersive X-ray fluorescence spectrometry study

The aim of this study was to investigate the effects of some acidic drinks on dentin erosion, using methods of surface profile (SP) analysis and energy-dispersive X-ray fluorescence spectrometry (EDXRF). One hundred standardized dentin slabs obtained from bovine incisor roots were used. Dentin slabs measuring 5x5 mm were ground flat, polished and half of each specimen surface was protected with nail polish. For 60 min, the dentin surfaces were immersed in 50 mL of 5 different drinks (Gatorade®, Del Valle Mais orange juice®, Coca-Cola®, Red Bull® and white wine), 20 blocks in each drink. The pH of each beverage was measured. After the erosive challenge, the nail polish was removed and SP was analyzed. The mineral concentration of dentin surfaces was determined by means of EDXRF. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). SP analysis showed that Red-Bull had the highest erosive potential (p<0.05). EDXRF results exhibited a decrease in phosphate in the groups immersed in Red-Bull, orange juice and white wine (p<0.05), and no significant difference in calcium content between the reference surface and eroded surface. In conclusion, this study demonstrated that all studied beverages promoted erosion on root dentin and Red Bull had the highest erosive potential. There was no correlation between pH of beverages and their erosive potential and only the P content changed after erosive challenge.

O objetivo deste estudo foi investigar os efeitos de algumas bebidas ácidas sobre a erosão da dentina, utilizando métodos de análise de perfil de superfície (SP) e espectrometria de energia dispersiva de fluorescência de raios X (EDXRF). Cem blocos de dentina padronizados obtidos de raízes de incisivos bovinos foram utilizados. Os blocos de dentina medindo 5x5 mm foram planificados, polidos e metade de cada superfície das amostras foram impermeabilizados com esmalte para unhas. Por 60 min, as superfícies de dentina foram imersas em 50 mL de 5 bebidas diferentes (Gatorade, suco de laranja, Coca-Cola, Red Bull e vinho branco), 20 blocos em cada bebida. O pH de cada bebida foi medido. Após o desafio erosivo, o esmalte de unha foi removido e SP foram analisados. A concentração de minerais das superfícies de dentina foi determinada por meio de EDXRF. Os dados foram analisados estatisticamente por ANOVA e teste de Tukey. (p<0,05). A análise SP mostrou que o Red-Bull apresentou o maior potencial erosivo. Os resultados do EDXRF apresentaram uma diminuição do fosfato dos grupos imersos no Red-Bull, suco de laranja e vinho branco, e não houve diferença significativa no teor de cálcio entre a superfície de referência e a superfície que sofreu erosão. O Red Bull apresentou o maior potencial erosivo sobre a dentina radicular. Não houve correlação entre o pH das bebidas e o seu potencial erosivo.

Ingredients and cytotoxicity of MTA and 3 kinds of Portland cements / 대한치과보존학회지

The aim of this study was to compare the compositions and cytotoxicity of white ProRoot MTA (white mineral trioxide aggregate) and 3 kinds of Portland cements. The elements, simple oxides and phase compositions of white MTA (WMTA), gray Portland cement (GPC), white Portland cement (WPC) and fast setting cement (FSC) were measured by inductively coupled plasma atomic emission spectrometry (ICP-AES), X-ray fluorescence spectrometry (XRF) and X-ray diffractometry (XRD). Agar diffusion test was carried out to evaluate the cytotoxicity of WMTA and 3 kinds of Portland cements. The results showed that WMTA and WPC contained far less magnesium (Mg), iron (Fe), manganese (Mn), and zinc (Zn) than GPC and FSC. FSC contained far more aluminum oxide (Al2O3) than WMTA, GPC, and WPC. WMTA, GPC, WPC and FSC were composed of main phases, such as tricalcicium silicate (3CaO.SiO2), dicalcium silicate (2CaO.SiO2), tricalcium aluminate (3CaO.Al2O3), and tetracalcium aluminoferrite (4CaO.Al2O3.Fe2O3). The significance of the differences in cellular response between WMTA, GPC, WPC and FSC was statistically analyzed by Kruskal-Wallis Exact test with Bonferroni's correction. The result showed no statistically significant difference (p > 0.05). WMTA, GPC, WPC and FSC showed similar compositions. However there were notable differences in the content of minor elements, such as aluminum (Al), magnesium, iron, manganese, and zinc. These differences might influence the physical properties of cements.

Clearance of iohexol--a new method to determine GFR / 中华肾脏病杂志

Objective To investigate the feasibility whether clearance of iohexol can be a reliable, sensitive and safe method for the determination of GFR. Methods The GFR of 19 patients with different renal functions were examined using clearance of 99m Tc-DTPA and clearance of iohexol. Then the correlation of them was analyzed. Serum and urinary iohexol was determined by X-ray fluorescence analysis. Results, These two methods were significantly correlated (r = 0. 98). Conclusion Clearance of iohexol is a safe, comfident, no-radioactivity method for the clinical practice of GFR determination.