Drugs that act in the lymphatic system and lymphatic drug delivery: review and perspective / 药学学报

The lymphatic system, as well as pathological changes of the lymphatic system, underlies the progress of an array of diseases and conditions, including cancer, inflammation and autoimmune disorders, infectious diseases and metabolic syndrome. A variety of biological targets in the lymphatic system can be employed to modulate these high-burden diseases, and the pharmacokinetics and drug delivery strategies in the context of lymphatics are of critical importance to optimise drug exposure to lymphatic-related targets. As such, research and drug development in this field has gained increasing attention in recent years. This article aims to provide an overview of pharmaceutical research with a focus on the lymphatic system and therapeutic targets within the lymphatics, followed by lymphatic drug delivery approaches, which may be of interest for researchers in academia, pharmaceutical industry and regulatory sciences.

Preparation of tripterygium glycoside nanoparticles and therapeutic effect on arthritis rats / 中国药理学通报

Aim To prepare tripterygium glycoside nanoparticles and probe into their therapeutic effect on collagen-induced arthritis ( CIA) rats. Methods Tripterygium glycosides polyglycoside nanoparticles were prepared by thin film dispersion method and their quality was assessed. The CIA model was established and drug intervention performed. The body weight, toe swelling degree and arthritis index were measured. The pathological changes of the organs, knee and ankle synovium were observed. The serum levels of kidney function and inflammatory cytokine expression were detected in rats. Results The prepared tripterygium wil-fordii polyglycoside nanoparticles were round particles with uniform distribution and stable properties under electron microscope. Compared with the model group, the swelling of the left and right toes of medication group significantly decreased (P < 0. 01), and the ar-thritis index markedly decreased ( P < 0. 01). Among them, the efficacy of the TG-NPs group was better than that of the TG group. Compared with the normal group, the indexes of heart, spleen, kidney and testis all significantly decreased (P <0. 05, P<0.01). TG-NPs group had a significantly reduced pathological ankle-joint injury in knee cartilage and increased apoptotic synovial cells. Compared with the model group, the serum levels of ALT and BUN and CRE in TG-NPs group were significantly lower (P < 0. 05 ), and IL-1β, TNF-α and IL-6 levels decreased significantly (P <0. 05). Conclusions TG-NPs have good therapeutic effect on CIA through induction of synovial cell apoptosis and decrease of the expression of inflammatory cytokines. By intravenous injection of blood circula-tion, slow and controlled release of drugs can be achieved, the first pass effect caused by oral drug can be avoided, the viscera toxicity can be reduced, which provides an experimental basis for the development of new nanoagents for the treatment of rheumatoid arthritis.

Effects of different storage and transportation devices on the temperatures of “internet plus drug delivery”in hospital under high-temperature conditions in summer / 中国药房

OBJECTIVE To explore suitable storage and transportation conditions for “internet plus drug delivery” under high- temperature conditions. METHODS A survey on high-temperature conditions in summer in Beijing was conducted； a retrospective analysis was conducted on “internet plus drug delivery” orders in our hospital from July 2021 to June 2022， summarizing the proportion and delivery range of drugs under different storage and transportation conditions. Additionally， simulation and validation experiments were performed to investigate optimal drug storage and transportation devices for “internet plus drug delivery” in Beijing under high-temperature conditions in summer. RESULTS The monthly average temperature in Beijing from June to August consistently exceeded 25.0 ℃ between 1991 and 2022. From July 2021 to June 2022， a total of 104 drugs were required to be stored below 25.0 ℃， accounting for 31.23% of the 333 drugs listed in our hospital’s “internet plus drug delivery” catalog in Beijing. These drugs were delivered 1 058 times， accounting for 19.63% of the total deliveries. Simulation and validation experiments demonstrated that the average maximum temperature during the next-day delivery process of “carton + foam box + composite aluminum film pearl cotton + 500 g ice bag×2 + gas column bag” was 9.6 ℃， the average minimum temperature was 2.7 ℃， and all the temperatures remained below 15.0 ℃， which could effectively ensure the quality of drugs. CONCLUSIONS Under the high-temperature conditions in summer in Beijing， the storage and transportation device of “carton + foam box + composite aluminum film pearl cotton + 500 g ice bag×2 + gas column bag” can meet the temperature requirements specified in the drug storage instructions for Beijing intra-city drug delivery.

Research progress of nano-drug delivery system for the treatment of ocular fundus diseases / 国际眼科杂志(Guoji Yanke Zazhi)

Diseases of ocular fundus are the leading causes of severe vision impairment or even blindness in patients worldwide, and the medical treatments are seriously limited by the difficulty of therapeutic drugs entering the fundus due to the various physiological barriers. Nano-drug delivery systems, with their nanoscale size and large surface area, can be loaded with therapeutic drugs of different physicochemical properties and modified with various surface active substances, which can not only improve the solubility and penetration of the drugs, but also protect biologic drugs from degradation and improve the biological safety and bioavailability, as well as deliver therapeutic drugs to specific ocular targets. All of these make the therapeutic potential enormous. Currently, more and more studies have been carried out to take advantage of nanomaterials for the treatment of different fundus diseases, including neurodegenerative diseases, fundus neovascularization, endophthalmitis and fundus tumors. This review analyzes the challenges and barriers faced by different routes of drug administration in the treatment of fundus diseases, the physicochemical properties of common nano-drug delivery systems that have been studied in related fields, and further summarizes the progress, advantages, limitations, and future directions of the application of various nano-drug delivery systems for the treatment of ocular fundus diseases in recent years.

Unlocking the potential of amorphous calcium carbonate: A star ascending in the realm of biomedical application

Calcium-based biomaterials have been intensively studied in the field of drug delivery owing to their excellent biocompatibility and biodegradability. Calcium-based materials can also deliver contrast agents, which can enhance real-time imaging and exert a Ca2+-interfering therapeutic effect. Based on these characteristics, amorphous calcium carbonate (ACC), as a brunch of calcium-based biomaterials, has the potential to become a widely used biomaterial. Highly functional ACC can be either discovered in natural organisms or obtained by chemical synthesis However, the standalone presence of ACC is unstable in vivo. Additives are required to be used as stabilizers or core-shell structures formed by permeable layers or lipids with modified molecules constructed to maintain the stability of ACC until the ACC carrier reaches its destination. ACC has high chemical instability and can produce biocompatible products when exposed to an acidic condition in vivo, such as Ca2+ with an immune-regulating ability and CO2 with an imaging-enhancing ability. Owing to these characteristics, ACC has been studied for self-sacrificing templates of carrier construction, targeted delivery of oncology drugs, immunomodulation, tumor imaging, tissue engineering, and calcium supplementation. Emphasis in this paper has been placed on the origin, structural features, and multiple applications of ACC. Meanwhile, ACC faces many challenges in clinical translation, and long-term basic research is required to overcome these challenges. We hope that this study will contribute to future innovative research on ACC.

Visualization of nasal powder distribution using biomimetic human nasal cavity model

Nasal drug delivery efficiency is highly dependent on the position in which the drug is deposited in the nasal cavity. However, no reliable method is currently available to assess its impact on delivery performance. In this study, a biomimetic nasal model based on three-dimensional (3D) reconstruction and three-dimensional printing (3DP) technology was developed for visualizing the deposition of drug powders in the nasal cavity. The results showed significant differences in cavity area and volume and powder distribution in the anterior part of the biomimetic nasal model of Chinese males and females. The nasal cavity model was modified with dimethicone and validated to be suitable for the deposition test. The experimental device produced the most satisfactory results with five spray times. Furthermore, particle sizes and spray angles were found to significantly affect the experimental device's performance and alter drug distribution, respectively. Additionally, mometasone furoate (MF) nasal spray (NS) distribution patterns were investigated in a goat nasal cavity model and three male goat noses, confirming the in vitro and in vivo correlation. In conclusion, the developed human nasal structure biomimetic device has the potential to be a valuable tool for assessing nasal drug delivery system deposition and distribution.

Design and Development Strategies for Multicomponent Co-delivery System of Traditional Chinese Medicine / 中国实验方剂学杂志

Chinese materia medica has a wide range of clinical applications， but it has many active ingredients with different physicochemical properties， and the target organs， action pathways and mechanisms for different ingredients to exert their efficacy are not the same. Therefore， it is difficult to design and develop a co-delivery system loading multiple components of Chinese materia medica to maximize the synergistic therapeutic efficiency. Based on the characteristics of effectiveness and functionality of active ingredients， the strategies for multi-component co-delivery of Chinese materia medica can be categorized into two types：firstly， based on the effectiveness of active ingredients， new carriers such as liposomes， nanoparticles can be constructed to load multi-components of Chinese materia medica. secondly， based on the functionality of some active ingredients of Chinese materia medica， they are employed in the construction of co-delivery system， which can give play to the dual characteristics of their own efficacy and preparation functions. In this paper， we summarized the relevant research progress of the above two types of multi-component co-delivery strategies， and mainly discussed the pharmaceutical functions of the active ingredients in co-delivery systems， in order to find a more suitable multi-component co-delivery strategy， promoting the design and development of new delivery systems of Chinese materia medica.

Research progress of sustained-release drug delivery system for uveitis / 国际眼科杂志(Guoji Yanke Zazhi)

Uveitis, a complex ocular disorder with numerous etiologies, can result from infection, autoimmune, and various physicochemical and mechanical injury factors. The treatment of this disease is difficult, and failure to receive timely and effective treatment can often lead to blindness. With the deepening of people's understanding of uveitis and its related mechanisms, various new sustained-release drug delivery systems for uveitis have been studied. However, due to the existence of various anatomical and physiological barriers in the eye, there are multiple obstacles to the sustained release treatment of uveitis. In this paper, the main research results in this field in recent years are reviewed, and the innovations and limitations of various new sustained-release drug delivery systems are discussed in order to provide new ideas for the sustained-release drug delivery treatment of uveitis in the future. These new sustained-release drug delivery systems will help to completely change the traditional treatment mode of uveitis with side effects and poor compliance in the future, bringing longer targeted sustained release and less toxic reactions.

Atividade antifúngica de nanofibras de policaprolactona/nistatina: estudo in vitro e in vivo / Antifungal activity of polycaprolactone/nystatin nanofibers: in vitro and in vivo study

Este estudo avaliou a eficácia in vitro e in vivo de mantas de nanofibras (NF) de policaprolactona (PCL) incorporadas com nistatina (NIS) no tratamento da estomatite protética (EP) em modelos animais. NF foram sintetizadas com diferentes concentrações de NIS, totalizando quatro soluções: PCL puro, PCL/NIS 0,045 g, PCL/NIS 0,090 g e PCL/NIS 0,225 g. A liberação da NIS foi analisada por espectroscopia Ultravioleta-Visível. A capacidade das mantas de inibirem o biofilme de Candida albicans, principal fator etiológico da EP, dividindo-se cinco grupos (N=5) compostos por um grupo com controle de células de C. albicans e com PCL puro, além das três concentrações de NIS. A seguir, foi analisada a viabilidade celular em queratinócitos humanos (HaCat) por meio do teste colorimétrico de resazurina. Cinco grupos foram divididos (N=10): controle celular, PCL puro e as três concentrações de NIS. Em modelos animais de ratos Wistar albinos (N=18), dispositivos palatinos (DP) de resina acrílica foram confeccionados simulando próteses totais e utilizados para a indução da EP. Para isso, DP contaminados com C. albicans foram cimentados na região molar da cavidade bucal dos animais e permaneceram em boca por 48 h. Após esse período, os DP foram removidos e os animais foram divididos em três grupos: (C) controle; (B1) com tratamento por mantas de PCL/NIS 0,045 g e (B2) PCL/NIS 0,225 g, com N=6. Então novos DP, livres de contaminação, foram cimentados na cavidade oral dos animais e permaneceu por mais 48 h. Após esse período, os animais foram eutanasiados, a contagem de UFC/ mL foi realizada e os palatos foram coletados para a análise histológica. A curva padrão de NIS obtida apresentou R2 de 0,99. As três concentrações de NF apresentaram liberação de NIS, com pico no tempo de 6 h e valores de 66,26 µg/ mL para PCL/NIS 0,045 g, de 333,87 µg/ mL para PCL/NIS 0,090 g e 436,51 µg/ mL para PCL/NIS 0,225 g, constantes até o fim do experimento. Os grupos com NIS reduziram em 2,5 log10 de crescimento do biofilme fúngico em relação aos grupos sem tratamento, Controle e PCL, sem diferença estatística significativa. Não foi observada citotoxicidade nas células HaCat, com viabilidade celular de 93,7% para PCL/NIS 0,045 g, 72,6% para PCL/NIS 0,090 g e 72,4% para PCL/NIS 0,225 g. A indução da EP nos três grupos foi possível e, porém, sem redução significativa na contagem de UFC/ mL de C. albicans nos grupos B1 e B2. Na análise histológica do grupo C pôde-se observar infiltração de hifas de Candida na camada queratinizada, presença de células inflamatórias formando micro abscessos e um discreto infiltrado inflamatório no tecido conjuntivo subjacente ao epitélio infectado. Nos grupos B1 e B2 não foram encontradas alterações epiteliais, concluindo-se que as NF demonstraram atividade antifúngica in vitro e foram efetivas na prevenção da penetração de hifas no tecido palatino de animais com DP (AU)

This study evaluated the in vitro and in vivo efficacy of nanofiber (NF) mats of polycaprolactone (PCL) incorporated with nystatin (NIS) in the treatment of denture stomatitis (DS) in animal models. NFs were synthesized with different concentrations of NIS, totaling four solutions: pure PCL, PCL/NIS 0.045 g, PCL/NIS 0.090 g, and PCL/NIS 0.225 g. The release of NIS was analyzed by Ultraviolet-Visible spectroscopy. The ability of the mats to inhibit Candida albicans biofilm, the main etiological factor of DS, was assessed by dividing five groups (N=5) composed of a group with C. albicans cell control and with pure PCL, in addition to the three concentrations of NIS. Next, cell viability in human keratinocytes (HaCat) was analyzed using the resazurin colorimetric test. Five groups were divided (N=10): cell control, pure PCL, and the three concentrations of NIS. In albino Wistar rat animal models (N=18), palatal devices (PD) made of acrylic resin were fabricated to simulate total prostheses and used to induce DS. For this, PD contaminated with C. albicans were cemented in the molar region of the animals' oral cavity and remained in the mouth for 48 hours. After this period, the PDs were removed, and the animals were divided into three groups: (C) control; (B1) treated with PCL/NIS 0.045 g mats, and (B2) PCL/NIS 0.225 g, with N=6. Then new, uncontaminated PDs were cemented in the animals' oral cavity and remained for another 48 hours. After this period, the animals were euthanized, UFC/ mL counts were performed, and the palates were collected for histological analysis. The standard NIS curve obtained showed an R2 of 0.99. The three concentrations of NF showed NIS release, with a peak at 6 h and values of 66.26 µg/ mL for PCL/NIS 0.045 g, 333.87 µg/ mL for PCL/NIS 0.090 g, and 436.51 µg/ mL for PCL/NIS 0.225 g, remaining constant until the end of the experiment. The groups with NIS reduced fungal biofilm growth by 2.5 log10 compared to the untreated groups, Control and PCL, with no significant statistical difference. No cytotoxicity was observed in HaCat cells, with cell viability of 93.7% for PCL/NIS 0.045 g, 72.6% for PCL/NIS 0.090 g, and 72.4% for PCL/NIS 0.225 g. Induction of DS in the three groups was possible; however, there was no significant reduction in UFC/ mL counts of C. albicans in groups B1 and B2. Histological analysis of group C revealed infiltration of Candida hyphae in the keratinized layer, presence of inflammatory cells forming micro abscesses, and a discreet inflammatory infiltrate in the connective tissue underlying the infected epithelium. No epithelial alterations were found in groups B1 and B2, concluding that NFs demonstrated in vitro antifungal activity and were effective in preventing hyphal penetration into palatal tissue in animals with PD.(AU)

Complexos polieletrólitos de quitosana e xantana carregados com ativos naturais e sintéticos: estudo físico/químico e microbiológico para aplicação de drug delivery / Polyelectrolyte complexes of chitosan and xanthan loaded with natural and synthetic actives: physicochemical and microbiological study for drug delivery application

A eficácia dos implantes osseointegrados é amplamente reconhecida na literatura científica. Contudo, infiltrações bacterianas na junção implante-pilar podem desencadear inflamação nos tecidos circundantes, contribuindo para a evolução de condições mais sérias, como a peri-implantite. O objetivo desse estudo foi produzir complexos polieletrólitos (PECs) de quitosana (Q) e xantana (X) em forma de membranas, carregá-las com ativos naturais e sintéticos antimicrobianos, caracterizálas estruturalmente e avaliá-las frente a degradação enzimática, cinética de liberação e ações antimicrobianas com finalidade de aplicação para drug delivery. Membranas de QX a 1% (m/v) foram produzidas em três proporções, totalizando doze grupos experimentais: QX (1:1); QX (1:2), QX (2:1), QX-P (com própolis) (1:1); QX-P (1:2); QX-P (2:1); QX-C (com canela) (1:1); QX-C (1:2); QX-C (2:1) e CLX (com clorexidina 0,2%) (1:1); CLX (1:2); CLX (2:1). Para os estudos de caracterização foram feitas análises da espessura em estado seco; análises morfológicas superficial e transversal em Microscopia Eletrônica de Varredura (MEV); análise estrutural de espectroscopia de infravermelho por transformada de Fourier (FTIR); análise de degradação por perda de massa sob ação da enzima lisozima; e análise da cinética de liberação dos ativos em saliva artificial. Para os testes microbiológicos, análises de verificação de halo de inibição e ação antibiofilme foram feitas contra cepas de Staphylococcus aureus (S. aureus) e Escherichia coli (E. coli). Os resultados demonstraram que a espessura das membranas variou conforme a proporção, sendo que o grupo QX (1:2) apresentou a maior média de 1,022 mm ± 0,2, seguida respectivamente do QX (1:1) com 0,641 mm ± 0,1 e QX (2:1) com 0,249 mm ± 0,1. Nas imagens de MEV é possível observar uma maior presença de fibras, rugosidade e porosidade nos grupos QX (1:2) e QX (1:1) respectivamente, e, no QX (2:1) uma superfície mais lisa, uniforme e fina. No FTIR foram confirmados os picos característicos dos materiais isoladamente, além de observar as ligações iônicas que ocorreram para formação dos PECs. Na análise de degradação, os grupos com ativos naturais adicionados tiveram melhores taxas de sobrevida do que os grupos QX. No teste de liberação, os grupos QX-P tiveram uma cinética mais lenta que os QX-C, cuja liberação acumulada de 100% foi feita em 24 h. Já nos testes do halo inibitório, somente os grupos CLX tiveram ação sobre as duas cepas, e os QX-P tiveram sobre S. aureus. Nas análises antibiofilme, os grupos CLX apresentaram as maiores taxas de redução metabólica nas duas cepas (± 79%); os grupos QX-P apresentaram taxas de redução similares em ambas as cepas, porém com percentual um pouco maior para E. coli (60- 80%) e os grupos QX-C tiveram grande discrepância entre as duas cepas: de 35 a 70% para S. aureus e 14 a 19% para E. coli. Pode-se concluir que, frente as análises feitas, o comportamento do material foi afetado diretamente pelos ativos adicionados a matriz polimérica. As proporções de Q ou X afetaram somente a espessura final. Quanto a aplicação proposta de drug delivery, os dispositivos apresentaram grande potencial, principalmente os grupos CLX e QX-P. (AU)

The effectiveness of osseointegrated implants is widely recognized in scientific literature. However, bacterial infiltrations at the implant-abutment interface may trigger inflammation in surrounding tissues, contributing to the development of more serious conditions, such as peri-implantitis. The aim of this study was to produce chitosan (Q) and xanthan (X) polyelectrolyte complexes (PECs) in the form of membranes, load and evaluate them for enzymatic degradation, release kinetics, and antimicrobial actions for drug delivery applications. QX membranes at 1% (w/v) were produced in three proportions, totaling twelve experimental groups: QX (1:1), QX (1:2), QX (2:1), QX-P (with propolis) (1:1), QX-P (1:2), QX-P (2:1), QX-C (with cinnamon) (1:1), QX-C (1:2), QX-C (2:1), and CLX (with 0.2% chlorhexidine) (1:1), CLX (1:2), CLX (2:1). Characterization studies included analyses of dry state thickness, surface and crosssectional morphology using Scanning Electron Microscopy (SEM), structural analysis by Fourier Transform Infrared (FTIR) spectroscopy, mass loss degradation analysis under lysozyme action, and active release kinetics analysis in artificial saliva. Microbiological tests included verification analyses of inhibition halos and antibiofilm action against strains of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Results showed that membrane thickness varied according to proportion, with group QX (1:2) presenting the highest average of 1.022 mm ± 0.2, followed by QX (1:1) with 0.641 mm ± 0.1, and QX (2:1) with 0.249 mm ± 0.1. SEM images showed greater presence of fibers, roughness, and porosity in groups QX (1:2) and QX (1:1) respectively, while QX (2:1) exhibited a smoother, more uniform, and thinner surface. FTIR confirmed characteristic peaks of the materials individually, besides showing ionic bonds formed for PECs. Degradation analysis revealed that groups with added natural actives had better survival rates than QX groups. In release tests, QX-P groups exhibited slower kinetics than QX-C, with 100% cumulative release achieved in 24 h. inhibitory halo tests, only CLX groups exhibited action against both strains, while QX-P acted against S. aureus. Antibiofilm analyses showed CLX groups with the highest metabolic reduction rates in both strains (± 79%); QX-P groups showed similar reduction rates in both strains, slightly higher for E. coli (60-80%), and QX-C groups had a significant discrepancy between strains: 35-70% for S. aureus and 14-19% for E. coli. In conclusion, material behavior was directly affected by added actives to the polymeric matrix. Proportions of Q or X only affected final thickness. Regarding proposed drug delivery applications, the devices showed great potential, especially CLX and QX-P groups.(AU)

Elemene Antitumor Drugs Development Based on "Molecular Compatibility Theory" and Clinical Application: A Retrospective and Prospective Outlook / 中国结合医学杂志

Elemene, derived from Curcuma wenyujin, one of the "8 famous genuine medicinal materials of Zhejiang province," exhibits remarkable antitumor activity. It has gained wide recognition in clinical practice for effectiveness on tumors. Dr. XIE Tian, introduced the innovative concept of "molecular compatibility theory" by combining Chinese medicine principles, specifically the "monarch, minister, assistant, and envoy" theory, with modern biomedical technology. This groundbreaking approach, along with a systematic analysis of Chinese medicine and modern biomedical knowledge, led to the development of elemene nanoliposome formulations. These novel formulations offer numerous advantages, including low toxicity, well-defined composition, synergistic effects on multiple targets, and excellent biocompatibility. Following the principles of the "molecular compatibility theory", further exploration of cancer treatment strategies and methods based on elemene was undertaken. This comprehensive review consolidates the current understanding of elemene's potential antitumor mechanisms, recent clinical investigations, advancements in drug delivery systems, and structural modifications. The ultimate goal of this review is to establish a solid theoretical foundation for researchers, empowering them to develop more effective antitumor drugs based on the principles of "molecular compatibility theory".

Mucoadhesive polymeric systems for vaginal drug delivery: a systemic review / Sistemas poliméricos mucoadhesivos para la liberación vaginal de fármacos: revisión sistemática

ABSTRACT Intravaginal drug administration has many advantages in comparison to other delivery routes: its local and systemic effect, lower dosages, and easiness of administration. Furthermore, makes it a reliable and comfortable way of therapy. This route can be used to prevent and treat a wide range of conditions including, sexually transmitted infections (STIs), hormonal treatment, birth control, and cancer treatment. The dosage forms may vary from ovules, tablets, rings, gels, creams, films and many more; lately adding the mucoadhesiveness to the characteristics to reduce the waste of active molecules. This review focuses on the way mucoadhesive polymeric systems have been applied in vaginal delivery. This review presents a bibliographical compilation of results from various investigations published in scientific databases: Science Direct, SciELO, and PubMed Central. Results compiled demonstrate that the intravaginal drug administration can be an alternative form of medication for women with more stable and prolonged results than traditional routes requiring lower doses and avoiding the first-pass effect.

RESUMEN La administración de fármacos por vía intravaginal cuenta con múltiples ventajas a comparación de otras rutas, puede lograr un efecto tanto local como sistémico, las dosis requeridas son menores, facilidad de administración entre otras, hacen que esta forma de administración sea confiable y cómoda. Esta vía de administración puede ser empleada para prevenir y tratar diferentes trastornos, como enfermedades de transmisión sexual, desordenes hormonales, anticonceptivos y tratamiento contra el cáncer. La presentación de las dosis puede variar, desde óvulos, tabletas, anillos, geles, cremas, películas entre otros, agregando a esta, en los últimos tiempos, la característica de mucoadhesividad para reducir el desecho de moléculas activas. Este trabajo se enfoca en las aplicaciones que han tenido los sistemas poliméricos mucoadhesivos en la vía intravaginal. La bibliografía recolectada se obtuvo de bases de datos como Science direct, SciELO, y PubMed Central. Los resultados obtenidos demuestran que la administración de fármacos por vía intravaginal puede ser una forma alternativa para medicación en mujeres, con resultados más estables y prolongados que otras rutas, requiriendo menores dosis y evitando el efecto de primer paso.

Novel Studies in the Designs of Natural, Synthetic, and Compound Hydrogels with Biomedical Applications / Novedosos Estudios en el Diseño de Hidrogeles Naturales, Sintéticos y Compuestos con Aplicaciones Biomédicas

ABSTRACT Hydrogels are gaining widespread popularity in the biomedical field due to their extraordinary properties, such as biocompatibility, biodegradability, zero toxicity, easy processing, and similarity to physiological tissue. They have applications in controlled drug release, wound dressing, tissue engineering, and regenerative medicine. Among these applications, hydrogels as a controlled drug delivery system stands out, which releases active substances in precise amounts and at specific times. To explore the latest advances in the design of hydrogels, a literature review of articles published in indexed scientific journals, in Scopus and Science Direct, was carried out. This review aimed to discover and describe the most innovative hydrogel research with applications in the biomedical field; hydrogels synthesized with polymers of different origins were selected, such as; i. Natural (dextran, agarose, chitosan, etc.); ii. Synthetic (polyacrylamide, polyethylene glycol, polyvinyl alcohol, etc.); iii. Composites (interpenetrants, hybrid crosslinkers, nanocomposites, etc.). Comparative analysis revealed that hydrogels with composite materials show the most promise. These composite hydrogels combine the advantages of different polymers or incorporate additional components, offering enhanced properties and functionalities. In summary, hydrogels are versatile biomaterials with immense potential in biomedicine. Their unique properties make them suitable for diverse applications. However, innovative designs and formulations must continue to be explored to further advance the capabilities of hydrogels and expand their biomedical applications.

RESUMEN Los hidrogeles están ganando una extensa popularidad en el campo biomédico gracias a que presentan propiedades extraordinarias como biocompatibilidad, biodegradabilidad, nula toxicidad, fácil procesamiento, y similitud con el tejido fisiológico. tienen aplicaciones en la liberación controlada de fármacos, el vendaje de heridas, la ingeniería de tejidos y la medicina regenerativa. Entre estas aplicaciones, destaca el uso de hidrogeles como sistema de administración controlada de fármacos, que liberan sustancias activas en cantidades precisas y en momentos concretos. Para explorar los últimos avances en el diseño de hidrogeles, se realizó una revisión bibliográfica de artículos publicados en revistas científicas indexadas, en Scopus y Science Direct. El objetivo de esta revisión fue descubrir y describir las investigaciones de hidrogeles más innovadoras con aplicaciones en el campo biomédico, se seleccionaron hidrogeles sintetizados con polímeros de diferente índole como; i. Naturales (dextrano, agarosa, quitosano, etc.); ii. Sintéticos (poliacrilamida, polietilenglicol, alcohol polivinílico, etc); iii. Compuestos (interpenetrantes, reticulantes híbridos, nanocompuestos, etc.). El análisis comparativo reveló que los hidrogeles que utilizan materiales compuestos son los más prometedores. Estos hidrogeles compuestos combinan las ventajas de distintos polímeros o incorporan componentes adicionales, ofreciendo propiedades y funcionalidades mejoradas. En resumen, los hidrogeles son biomateriales versátiles con un inmenso potencial en biomedicina. Sus propiedades únicas los hacen adecuados para diversas aplicaciones, sin embargo, se debe seguir explorando diseños y formulaciones innovadores para seguir avanzando en las capacidades de los hidrogeles y ampliar sus aplicaciones biomédicas.

Designing and making an open source, 3D-printed, punctal plug with drug delivery system

With the advancement in the study of keratoconjunctivitis sicca and the scope of its treatment, punctal plugs are being widely used for the therapeutic management of dry eye disease. With the emergence of 3D printing in medicine, 3D printing of punctal plugs that have an inbuilt drug delivery system and also that can be personalized from patient to patient according to their punctum size can be a great therapeutic option. Another benefit of the device is that its printing takes a short period of time and is cost-effective. This study aimed at making an open source design and 3D printing an efficient model of a punctal plug with an inbuilt drug delivery system that can be eventually used for the treatment of various ocular diseases that require frequent drug instillation or blockage of the nasolacrimal pathway. The 3D design for the punctal plug was made using the open source application, FreeCAD, and slicing was done using the application ChituBox. After that, the plugs were printed using the LCD printer Crealty LD-002R. The material used was resin that was compatible with the Crealty LD-002R. Punctal plugs with satisfactory results were printed using the LCD printer. The punctal plugs showed suitable structure and were also easily reproduced in the 3D printer without any complications or setbacks.

Research progress of biomimetic nano drug delivery system in nervous system disease / 药学学报

Brain delivery of drugs remains challenging due to the presence of the blood-brain barrier (BBB). With advances in nanotechnology and biotechnology, new possibilities for brain-targeted drug delivery have emerged. Biomimetic nano drug delivery systems with high brain-targeting and BBB-penetrating capabilities, along with good biocompatibility and safety, can enable 'invisible' drug delivery. In this review, five different types of biomimetic strategies are presented and their research progress in central nervous system disorders is reviewed. Finally, the challenges and future prospects for biomimetic nano drug delivery systems in intracerebral drug delivery are summarized.

Transdermal drug delivery technology for brain-targeted drug delivery / 药学学报

Intracerebral delivery of drugs for the treatment of central nervous system disorders is usually limited by the blood-brain barrier (BBB). Transdermal drug delivery systems (TDDS) have the advantage of improving patient compliance and avoiding first-pass effects compared to intravenous, oral and intranasal drug delivery, and are an emerging non-invasive drug delivery route that facilitates long-term drug delivery to patients. The discovery of direct subcutaneous targeting of lymphatic pathways to brain tissue has made TDDS a new brain-targeted drug delivery strategy. At the same time, the development of nano-delivery technology has further facilitated the application of TDDS for targeted drug delivery to the brain. This review summarizes the mechanism of transdermal drug delivery into the brain and the application of TDDS in the treatment of brain diseases, providing new ideas and methods for the treatment of central nervous system diseases.

Effects of propofol and remifentanil in different TCI sequences on hypotension during induction of general anesthesia in hypertensive patients / 中华麻醉学杂志

Objective:To evaluate the effect of propofol and remifentanil in different target-controlled infusion(TCI) sequences on hypotension during induction of general anesthesia in hypertensive patients.Methods:A total of 132 patients with hypertension of both sexes, aged 50-75 yr, of American Society of Anesthesiologists Physical Status classificationⅡ or Ⅲ, with body mass index of 18-30 kg/m 2, scheduled for elective tracheal intubation under general anesthesia, were divided into 3 groups( n=44 each) using a random number table method: group C, PR group and RP group. In group C, propofol(target effect-site concentration 5 μg/ml) and remifentanil(target effect-site concentration 5 ng/ml) were simultaneously given by TCI. Propofol was given by TCI followed by TCI of remifentanil in PR group. Remifentanil was given by TCI followed by TCI of propofol in RP group. The development of hypotension was observed within 10 min after induction of general anesthesia, and the consumption of propofol, remifentanil and ephedrine, time of loss of consciousness, time of tracheal intubation and adverse reactions during the perioperative period were recorded. Results:Compared with group C, the incidence of hypotension during induction was significantly decreased, the consumption of propofol and ephedrine was decreased, and the BIS value was increased when consciousness disappeared, the time of loss of consciousness and time of tracheal intubation were prolonged, the BIS value was increased at loss of consciousness in PR group, and the consumption of ephedrine was significantly decreased, and the time of loss of consciousness and time of tracheal intubation were prolonged in RP group( P<0.05). Compared with PR group, the consumption of ephedrine was significantly decreased, and the time of loss of consciousness was prolonged in RP group( P<0.05). There was no significant difference in the incidence of responses to tracheal intubation, injection pain, bucking, inhibition ratio, postoperative delirium, postoperative nausea and vomiting, and intraoperative awareness during induction among the three groups( P>0.05). Conclusions:TCI of remifentanil followed by TCI of propofol can decrease the development of hypotension during induction of general anesthesia in hypertensive patients.

Apoptosis-promoting effect of temozolomide loaded nanoparticles combined with low intensity focused ultrasound on human glioma cells / 中华超声影像学杂志

Objective:To prepare liquid-gas phase modified nanoparticles (TMZ/PFP/PLGA NPs) of perfluoropentane (PFP) and temozolomide (TMZ) encapsulated by polylactic-glycolic acid copolymer (PLGA), combined with low intensity focused ultrasound (LIFU) irradiation, and to investigate its ultrasound imaging ability and intervention effect on human glioma cells in vitro.Methods:TMZ/PFP/PLGA NPs were prepared by compound emulsion method. The basic physical and chemical properties and drug loading ability of TMZ/PFP/PLGA NPs were detected. CCK-8 assay was used to detect the cytotoxicity of nanoparticles in vitro and the effect of synergistic intervention with LIFU on the survival rate of glioma cells. The expression levels of apoptosis related proteins Bcl-2, Bax and caspase-3 were detected by Western blot.Results:Under transmission electron microscope, TMZ/PFP/PLGA NPs showed a circular core-shell structure with regular morphology, particle size was (137.9±63.31)nm, encapsulation efficiency of TMZ was (83.01±5.57)%, drug loading was (3.19±0.22)%. The survival rate of U251 cells was still above 70% after 24 hours of co-incubation with nanoparticles. Under the synergistic effect of LIFU irradiation, the apoptosis of U251 cells was accelerated and the survival rate of U251 cells was significantly decreased. The results of Western blot showed that the synergic intervention could significantly down-regulate the expression of apoptosis related protein Bcl-2, and significantly up-regulate the expression of Bax protein and caspase-3 protein (all P<0.05). Conclusions:TMZ/PFP/PLGA NPs have good basic physical and chemical properties. TMZ/PFP/PLGA NPs have low cytotoxicity in vitro while efficiently loading chemotherapeutic drug timozolomide. Synergistic intervention under LIFU irradiation can significantly accelerate the apoptosis of U251 glioma cells, which has a good application prospect.

Progress in controlled ocular anti-VEGF drug release delivery system / 中华实验眼科杂志

Neovascularization is the hallmark of many fundus diseases, including diabetic retinopathy, retinal vein occlusion and neovascular age-related macular degeneration.More and more evidence suggests that vascular endothelial growth factor (VEGF) plays a critical role in neovascularization.Anti-VEGF drugs are the first-line treatment for neovascular fundus diseases and have achieved significant results.However, there are drawbacks such as short drug half-lives and the need for long-term administration to maintain effective concentrations, which increases the economic burden and medical risk for patients and reduces compliance.Therefore, finding a new method for intraocular drug delivery is of great clinical importance.Based on the principle that diabetes patients use insulin pumps to gradually release drugs, the ocular anti-VEGF drug delivery system can continuously release anti-VEGF drugs over a period of time, significantly reducing the injection frequency and improving patient compliance.At present, the research on ocular anti-VEGF drug delivery systems is still immature, and various systems are in different stages of clinical trials.According to different design principles, they can be divided into three categories with their characteristics, micropump (extraocular storage delivery systems), biodegradable implants, and non-biodegradable implants.This article summarized and analyzed the controlled ocular anti-VEGF drug release delivery systems currently in clinical trials.

Recent advances in nanocarrier-based drug delivery systems in treatment of rheumatoid arthritis / 中国中药杂志

Rheumatoid arthritis(RA) is a widely prevalent autoimmune inflammatory disease that severely affects patients' quality of life. Currently, conventional formulations against RA have several limitations, such as nonspecificity, poor efficacy, large drug dosages, frequent administration, and systemic side effects. Nanotechnology-based drug delivery systems have emerged as a promising stra-tegy for the diagnosis and treatment of RA since nanotechnology can overcome the limitations of traditional treatments and simplify the complexity of the disease. These systems enable targeted delivery of anti-inflammatory drugs to the inflamed areas through active and passive targeting, achieving specificity to the joints, overcoming the need for increased dosage and administration frequency, and reducing associated adverse reactions. This article aimed to review nanocarrier-based drug delivery systems in the field of RA and elucidate how nanosystems can be utilized to deliver therapeutic drugs to inflamed joints for controlling RA progression. By discussing the current issues and challenges faced by nanodrug delivery systems and highlighting the urgent need for solutions, this article offers theoretical support for further research on nanotechnology-based co-delivery systems in the future.