RESUMEN
La deficiencia transversal del maxilar es una anomalía dentomaxilar capaz de producir problemas funcionales en la oclusión, respiración y estéticos. Su presentación clínica tradicional es la mordida cruzada posterior y una alteración en la relación transversal intermaxilar, la cual impide la correcta erupción de las piezas dentarias. Su manejo corresponde a la expansión rápida del maxilar, la cual puede ser asistida mediante mini-implantes (MARPE), cirugía (SARPE) o una combinación de ambas técnicas (MISMARPE). El objetivo del presente artículo es presentar un contraste entre las técnicas empleadas en la expansión rápida del maxilar, para simplificar la toma de decisiones clínicas. Se elaboró una revisión narrativa en las bases de datos PubMed, Scopus y Epistemonikos contemplando revisiones sistemáticas, metaanálisis, ensayos clínicos aleatorizados y estudios observacionales publicados entre el año 2013 a 2023. Un total de 23 artículos fueron incluidos, los cuales cumplían con los criterios de inclusión y exclusión establecidos. El manejo clínico de la deficiencia transversal del maxilar frecuentemente requiere un abordaje interdisciplinario combinando un enfoque ortopédico y quirúrgico. Según lo encontrado en la actual revisión, tanto el MARPE, SARPE y MISMARPE reportan indicaciones y limitaciones, así como complicaciones asociadas, sin embargo, serían efectivas en la resolución de deficiencias transversales. Se recomienda al clínico considerar dicha información de acuerdo a las necesidades particulares de cada caso clínico, así como profundizar y prolongar el estudio de nuevas técnicas para analizar su estabilidad a largo plazo en comparación a las otras corrientes terapéuticas.
The transverse deficiency of the maxilla is a dentomaxillary anomaly capable of producing functional problems in occlusion, respiration and esthetics. Its traditional clinical presentation is dental crowding, which obstructs the correct eruption of the teeth. Its management corresponds to rapid maxillary expansion, which can be assisted by means of mini-implants (MARPE), surgery (SARPE) or a combination of both techniques (MISMARPE). The objective of this article is to present a contrast between the techniques used in rapid maxillary expansion to simplify clinical decision making. A narrative review was performed in PubMed, Scopus and Epistemonikos databases, including systematic reviews, meta-analyses, randomized clinical trials and observational studies published between 2013 and 2023. A total of 23 articles were included, which met the established inclusion and exclusion criteria. The clinical management of transverse deficiency of the maxilla frequently requires an interdisciplinary management, combining an orthopedic and surgical approach. As found in the current review, all techniques; MARPE, SARPE and MISMARPE, report indications and limitations, as well as associated complications. It is recommended to deepen and prolong the study of new techniques in order to analyze their long-term stability in comparison to other therapeutic currents.
RESUMEN
Objetivo: A tecnologia assistiva (TA) busca suprir ou reduzir o impacto das deficiências na execução de tarefas da vida cotidiana. Embora muitas pessoas necessitem de TA, em 2021, a OMS estimou que apenas uma em cada dez pessoas tinha acesso a ela. Com a oferta retraída e a demanda em alta, observou-se um movimento mundial crescente de inovações em TA e a abertura de um cenário de oportunidades para esse mercado. O objetivo deste artigo é avaliar o mercado de TA no Brasil e as projeções futuras, no cenário mundial. Métodos: A pesquisa foi realizada em três etapas. Primeiramente, foi realizado um estudo bibliográfico do Livro Branco da Tecnologia Assistiva no Brasil (2017), para reconhecimento dos desafios do mercado brasileiro. Em seguida, foi realizado um estudo sobre o cenário de crédito nacional, com foco em financiamento de TA. Para compreensão do mercado mundial, foi realizada uma pesquisa nos sites de análise de mercado de TA. Resultados: Há escassez de TA no Brasil. Os principais fornecedores são pequenas e médias empresas, e são escassos os incentivos fiscais e de crédito, assim como os investimentos em pesquisa, desenvolvimento e inovação. Em escala mundial, o mercado de TA foi avaliado em US$ 21,95 bilhões de dólares em 2022, devendo atingir o valor de US$ 31,22 bilhões de dólares até o ano de 2030. Conclusão: O mercado mundial de TA está em franca expansão e apresenta grande potencial de abertura para novos mercados. Esse cenário reflete um momento de oportunidades de negócio para as empresas nacionais.
Objective: Assistive Technology (AT) seeks to overcome or reduce the impact of deficiencies when performing everyday tasks. Although many people needed AT, in 2021, the WHO estimated that only one in ten people had access. With reduced supply and rising demand, a growing global movement of AT innovations was inspired, opening up a scenario of opportunities for this market. The objective of this study is to evaluate the AT market in Brazil and future projections on the global stage. Methods: The research was carried out in three stages. Firstly, a bibliographical study of the "White Book of Assistive Technology in Brazil" was carried out to recognize the challenges of the Brazilian market. Next, a study was carried out on the national credit scenario, focusing on TA financing. To understand the global market, research was carried out on TA market analysis websites. Results: There is a shortage of AT in Brazil. The main suppliers are small and medium-sized companies, and tax and credit incentives, as well as investments in Research, Development and Innovation, are scarce. On a global scale, the AT market was valued at US$ 21.95 billion in 2022, and is expected to reach a value of US$ 31.22 billion by the year 2030. Conclusion: The global AT market is in rapid expansion and presents great potential for opening up new markets. This scenario reflects a moment of business opportunities for national companies.
Asunto(s)
Dispositivos de Autoayuda , MotivaciónRESUMEN
Objective:To compare the effects of treatment with Hybrid-Hyrax-Facemask(FM)versus miniscrews in the anterior pal-ate combined with Hybrid-Hyrax-Facemask(MSI/FM)for patients with early Class Ⅲ malocclusion and maxillary deficiency.Methods:18 patients aged with early Class Ⅲ malocclusion and maxillary deficiency were randomly divided into 2 groups(n=9)and treated with FM and MSI/FM respectively.Alternating rapid maxillary expansion and constriction(Alt-RAMEC)protocol combined with a maxillary protraction force of 3.92 N was applied on each side of all patients from elastics connected to the facemask in a down-ward and forward direction of 30° to the occlusal plane.Iortho cephalometric software was used to analyze the data of lateral cephalo-grams of the patients before(T0)and after(T1)treatment.Results:Improvement was verified in the facial profile and occlusion of all patients.In MSI/FM group the average treatment time was shorter.There were significant differences(P＜0.05)between T0 and T1 in the following measurements in FM group:SNA,ANB,Co-A,Co-Gn,Wits,S-Go,Na-Me,MP,U1-SN,UADH,LADH,Overjet,UL-EP increased,U1-L1 decreased.There were significant differences(P＜0.05)between T0 and T1 in the following measurements in the MSI/FM group:SNA,ANB,Co-A,Wits,Na-Me,MP,Y-axis,U1-SN,Overjet,UL-EP increased,SNB,Co-Gn-Co-A,S-Go/N-Me,U1-L1,L1-MP decreased.Conclusion:Both FM and MSI/FM combined with Alt-RAMEC protocol and a maxillary protraction force are effective in the treatment for Class Ⅲ patients with maxillary deficiency.MSI/FM may produce more significant bone effect and re-duce dental compensation,promote more forward growth of midface and more improvement in the growth direction of mandible and re-duce compensatory lip inclination of anterior teeth in shorter treatment time.
RESUMEN
Objective:To investigate the safety and efficiency of depilation with intense pulsed light (IPL) in congenital microtia patients during different phase of reconstruction treatment sessions.Methods:The hairy skin was treated with the M22TM system (Lumenis, German) using a filter of 695-1 200 mm. A three pluses mode of the radiant setting with a pulse width of 3.5 ms, a delay of 60 ms, and an energy density of 16-18 mJ/cm 2 was applied in the expanded patients. Depilation efficacy was evaluated as follows: excellent (hair density reduction >75%), good (50%-75%), fair (25%-50%), and poor (<25%). The depilation effect was compared between different phases. And the adverse effect was observed. Results:A total of 131 cases were included. There was no difference of the hair density reduction between patients with different expander volume after same IPL depilation treatments [15 (13-19) vs. 16 (15-19) root/cm 2, Wilcoxon rank analysis]. The hair density reduction in the expansion group was lower than the non-expansion group after two IPL depilation treatments [15 (13-19) vs. 17 (15-21) root/cm 2, P<0.05, Wilcoxon rank analysis]. The depilation efficacy was highly related with the numbers of IPL depilation treatments the patients received [Kendall′ stat b=0.74 (95% CI: 0.71-0.77), P<0.05]. There were 3 cases of folliculitis, 2 cases of blisters occurred in this study, and no expander exposure and cartilage absorption were observed. Conclusions:Hair removal with IPL is a safe and effective photo-epilation method during all stages of ear reconstruction using tissue expander. The volume of the expander does not significantly affect the hair removal efficiency. Depilation in the expansion phase is more efficient than that in the non-expansion phase, and the ideal result of " hair-free" or " less hairy" reconstructed ears can be achieved in 5 treatments, with suboptimal results in 3 treatments.
RESUMEN
Objective@#To investigate the clinical efficacy of disc repositioning surgery combined with orthodontic treatment in patients with temporomandibular disorder and facial asymmetry.@*Methods@#One patient who underwent disc repositioning surgery combined with orthodontic treatment for temporomandibular joint disorder and facial asymmetry was reported. Preoperatively, the patient had a skewed shape of the opening, mild pressure pain in the right preauricular region with left mandibular deviation, and a mismatch between the width of the upper and lower dental arches. In the arthrosurgery department, bilateral temporomandibular disc replacement and anchorage were performed through a transauricular incision, and an auxiliary splint was worn to stabilize the jaw position for 6 months. In the orthopedic department, maxillary skeletal expansion was used in combination with the multiloop edgewise archwire technique to reconstruct the occlusion after 16 months of orthodontic treatment.@*Results@#The deviation was corrected by wearing an occlusal splint for six months after joint repositioning and anchoring; moreover, the pain symptoms disappeared, and the cone beam CT examination showed that the bilateral temporomandibular joint space was uniformly enlarged, the lower alveolar ridge midline deviated to the right, the posterior regions of the teeth were bilaterally inverted, and the anterior region and the posterior region of the left side were open. The orthodontic treatment matched the width of the upper and lower dental arches and established the cuspal molar neutrality relationship and the normal overjet coverage of the anterior teeth; additionally, the mandibular position was not obviously skewed. A review of the results of the related literature shows that abnormal occlusal relationships, such as mismatched arch width and skewed occlusal plane, can cause adaptive mandibular deviation, which can lead to the occurrence of TMD. Temporomandibular joint disc anchorage with splint treatment can effectively improve maxillofacial deformity in young TMD patients. After the establishment of a stable, physiologically functional disc-condylar relationship, orthodontic treatment is required to remove the interfering factors to rebuild the occlusion, and long-term postoperative review and follow-up are needed.@*Conclusion@#In patients with TMD and mandibular accommodative deviation due to occlusal anomalies, establishing a normal disc-condylar relationship and eliminating occlusal interference through disc repositioning surgery combined with orthodontic treatment can effectively improve facial shape and establish a stable jaw position.
RESUMEN
Abstract Objective To verify changes in facial soft tissue using the RadiANT-DICOM-viewer and Dolphin Imaging software, through linear measurements of tomographic points in a 3D reconstruction of the face and volumetric evaluation with three-dimensional measurements of the upper airways of patients with transverse maxillary discrepancy undergoing Surgically Assisted Rapid Maxillary Expansion (SARME). Methods Retrospective, transverse, and descriptive study, through the analysis of computed tomography scans of the face of patients with transverse maxillary discrepancy, treated from July 2019 to December 2022. The sample consisted of 15 patients of both sexes, aged 21-42 years old, who underwent surgically assisted rapid maxillary expansion using the transpalatal distractor. Analysis was performed through linear, angular, and three-dimensional measurements in millimeters, in the preoperative and late four-month postoperative period, in frontal 3D tomographic images of the face, in the region of the width of the nose and alar base and also angular measurement in the lateral tomography for the angle nasolabial and upper airways of rhinopharynx, oropharynx and hypopharynx. Results There was an increase in nasal width with an average of 1.3467 mm and an increase in the alar base with an average of 1.7333 mm. A significant difference was found in the pre- and postoperative assessments of the measurements of nasal width, alar base and nasolabial angle, as well as the upper airways in all their extension. The results favour a better understanding of the professional and the patient regarding the diagnosis and management of patients with transverse maxillary width discrepancies. Conclusion Although our study shows an increase in soft tissues after SARME, no aesthetic changes are observed clinically, and all patients report significant respiratory improvement. SARME may therefore contribute to the improvement of professionals working in the field of oral and maxillofacial surgery and orthodontics. Level of evidence: Level 4.
RESUMEN
Abstract: This study evaluated the stress distribution in the dentoalveolar and palatal bone structures during maxillary expansion in a 17-year-old male patient with bilateral cleft lip and palate (BCLP) using expanders with dental (HYRAX) and skeletal anchorage (MARPE). For the generation of the specific finite element models, cone-beam computed tomography was used, and the DICOM files were exported to Mimics 3-Matic (Materialise) and Patran (MSC Software) software. Three specific three-dimensional models were generated: A) HYRAX: conventional four-banded hyrax screw (9 mm); B) MARPE-DS: 3 miniscrews (1.8 mm diameter - 5.4 mm length) and four-banded dental anchorage; and C) MARPE-NoDS: 3 miniscrews without dental anchorage. Maxillary expansion was simulated by activating the expanders transversely 1 mm on the "X" axis. HYRAX resulted in higher levels of deformation predominantly in the dentoalveolar region. MARPE-DS showed stress in the dentoalveolar region and mainly in the center of the palatal region, at approximately 4,000 με. MARPE-NoDS exhibited evident stress only in the palatal region. High stress levels in the root anchoring teeth were observed for HYRAX and MARPE-DS. In contrast, MARPE-NoDS cause stress on the tooth structure. The stress distribution from the expanders used in the BLCP showed asymmetric expansive behavior. During the initial activation phase of expansion, the HYRAX and MARPE-DS models produced similarly high strain at the dentoalveolar structures and upper posterior teeth displacement. The MARPE-NoDS model showed restricted strain on the palate.
RESUMEN
ABSTRACT Introduction: Surgically assisted rapid palatal expansion (SARPE) has been the treatment of choice in subjects presenting skeletally mature sutures. Objective: The purpose of this study was to analyze stress distribution and displacement of the craniofacial and dentoalveolar structures resulting from three types of palatal expanders with surgical assistance using a non-linear finite element analysis. Material and Methods: Three different palatal expanders were designed: Model-I (tooth-bone-borne type containing four miniscrews), Model-II (tooth-bone-borne type containing two miniscrews), and Model-III (bone-borne type containing four miniscrews). A Le Fort I osteotomy was performed, and a total of 5.0 mm palatal expansion was simulated. Nonlinear analysis (three theory) method (geometric nonlinear theory, nonlinear contact theory, and nonlinear material methods) was used to evaluate stress and displacement of several craniofacial and dentoalveolar structures. Results: Regardless of the maxillary expander device type, surgically assisted rapid palatal expansion produces greater anterior maxillary expansion than posterior (ANS ranged from 2.675 mm to 3.444 mm, and PNS ranged from 0.522 mm to 1.721 mm); Model-I showed more parallel midpalatal suture opening pattern - PNS/ANS equal to 54%. In regards to ANS, Model-II (1.159 mm) and Model-III (1.000 mm) presented larger downward displacement than Model-I (0.343 mm). PNS displaced anteriorly more than ANS for all devices; Model-III presented the largest amount of forward displacement for PNS (1.147 mm) and ANS (1.064 mm). All three type of expanders showed similar dental displacement, and minimal craniofacial sutures separation. As expected, different maxillary expander designs produce different primary areas and levels of stresses (the bone-borne expander presented minimal stress at the teeth and the tooth-bone-borne expander with two miniscrews presented the highest). Conclusions: Based on this finite element method/finite element analysis, the results showed that different maxillary expander designs produce different primary areas and levels of stresses, minimal displacement of the craniofacial sutures, and different skeletal V-shape expansion.
RESUMO Introdução: A expansão rápida da maxila assistida cirurgicamente (ERMAC) tem sido o tratamento de escolha em indivíduos que apresentam suturas esqueleticamente maduras. Objetivo: O objetivo deste estudo foi avaliar, utilizando uma análise não linear com elementos finitos, a distribuição de tensões e os deslocamentos das estruturas craniofaciais e dentoalveolares gerados por três tipos de expansores palatinos usados na ERMAC. Material e Métodos: Três tipos de expansores palatinos foram projetados: Modelo I (dento-osseossuportado com quatro mini-implantes), Modelo II (dento-osseossuportado com dois mini-implantes) e Modelo III (osseossuportado com quatro mini-implantes). Uma osteotomia Le Fort I foi realizada e foi simulada uma expansão palatina total de 5,0 mm. Um método de análise não linear (três teorias - teoria da não-linearidade geométrica, teoria do contato não linear e métodos para materiais não lineares) foi utilizado para avaliar a tensão e o deslocamento de diversas estruturas craniofaciais e dentoalveolares. Resultados: Independentemente do tipo de aparelho expansor palatino, a ERMAC produziu maior expansão anterior da maxila do que posterior (ENA variou de 2,675 mm a 3,444 mm e ENP variou de 0,522 mm a 1,721 mm); o Modelo I apresentou padrão de abertura mais paralela da sutura palatina mediana, com ENP/ENA igual a 54%. Com relação à ENA, o Modelo II (1,159 mm) e o Modelo III (1,000 mm) apresentaram maior deslocamento para baixo do que o Modelo I (0,343 mm). A ENP deslocou-se mais para anterior do que a ENA com todos os aparelhos; o Modelo III apresentou o maior deslocamento para anterior da ENP (1,147 mm) e da ENA (1,064 mm). Os três tipos de expansores apresentaram deslocamento dentário semelhante e separação mínima das suturas craniofaciais. Como esperado, diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensões (o expansor osseossuportado apresentou tensão mínima nos dentes, e o expansor dento-osseossuportado com dois mini-implantes apresentou o maior). Conclusões: Com base nesse estudo de elementos finitos, os resultados mostraram que diferentes designs de expansores palatinos produzem diferentes áreas primárias e níveis de tensão, com deslocamento mínimo das suturas craniofaciais e diferentes expansões esqueléticas em forma de V.
RESUMEN
O artigo demonstra que as respostas dadas aos ataques de 11 de setembro de 2001 nos Estados Unidos potencializaram a rearticulação das forças em torno de posturas em defesa de políticas neoconservadoras e totalitárias, da extrema-direita radical e de seus representantes. A metodologia adotada para a reconstrução histórica norteou-se pela pesquisa em material veiculado pelos meios de comunicação naquele período. O ocorrido revelou, manifestou e desenvolveu potenciais de controle jurídico-político e militar sobre os indivíduos e as coletividades, recrudescendo a democracia. Isso significou a recuperação de ingredientes neofascistas, a prática de formular acusações e fazer insinuações sem ter provas, as fobias e aversões de variadas nuanças e, de modo geral, a propagação da violência, que se expressam na questão social e na atuação profissional. As respostas dadas ao ocorrido revelaram interesses da indústria de experimentos em armamentos com tecnologia intensiva, confirmando-se como uma forma de resistência capitalista
The article demonstrates that the responses to the September 11, 2001, attacks in the United States intensified the rearticulation of forces around positions defending neoconservative and totalitarian policies, radical far-right ideologies, and their representatives. The methodology employed for historical reconstruction was guided by research on media materials from that period. The event revealed, manifested, and developed potential legal-political and military controls over individuals and communities, undermining democracy. This fact entailed the resurgence of neo-fascist elements, the practice of formulating accusations and insinuations without evidence, phobias, and aversions of various shades, and, overall, the propagation of violence, which manifests itself in the social question and professional conduct. The responses to the event revealed interest in the weapons experimentation industry with intensive technology, confirming itself as a form of capitalist resistance
Asunto(s)
Humanos , Política , Violencia , TerrorismoRESUMEN
Abstract Objective: Investigate the influence of posterior crossbite on masticatory and swallowing functions by videofluoroscopy examination and to analyze the effects of Rapid Maxillary Expansion (RME) on the same functions. Methods: A prospective longitudinal study was conducted on 32 children, 21 of them with posterior crossbite (10 girls and 11 boys, mean age 9.2 years, study group) and 11 children with no occlusal changes (6 girls and 5 boys, mean age 9.3 years, control group). The children were evaluated by an orthodontist for diagnosis, group characterization and occlusal treatment, by the otorhinolaryngology team for the assessment of respiratory symptoms, and by a speech therapist for videofluoroscopic evaluation of masticatory and swallowing parameters. The children with posterior crossbite were treated orthodontic ally using the Haas disjunctor for approximately six months and re-evaluated 5-months after removal of the appliance. Data were analyzed statistically by the Studentt-test for independent samples for comparison of the crossbite and control groups before and after treatment. Results: There was no significant difference in oral preparatory and oral transit times, nor in cycles and masticatory frequency, between the pre and post orthodontic treatment groups and the control group. Conclusion: Rapid maxillary expansion did not influence the masticatory and swallowing variables studied by videofluoroscopy. However, the data require caution in interpretation.
RESUMEN
In 2013, midpalatal suture maturation stage assessment was proposed for the evaluation of patients before performing maxillary expansion. In this study, we aimed to analyze the association between the midpalatal suture maturation stages assessed by CBCT, according to the method described by Angelieri et al., and other objective methods used to assess skeletal maturation or bone fusion. A computerized database search was conducted using PubMed, Cochrane Library, SciELO, LILACS, Web of Science, and Scopus, without language restriction. Unpublished literature was searched on ClinicalTrials.gov, the National Research Register, and Pro-Quest Dissertation Abstracts and Thesis database. Authors were contacted when necessary, and reference lists of the included studies were screened. Search terms included midpalatal suture, maturation, correlation, diagnostic performance, classification, evaluation, assessment, and relationship. Quality assessment was performed using the Observational Cohort and Cross-Sectional Studies tool developed by the National Heart, Lung, and Blood Institute. Eleven studies met the inclusion criteria. Of all the studies included, 81.9% had fair qualit y and 18.1% good quality, respectively. Eight out of eleven studies assessed the correlation between the midpalatal suture maturation method and the skeletal maturity evaluated by CVM method (Spearman's correlation coefficient: 0.244-0.908). Two out of eleven studies evaluated the correlation between midpalatal suture maturation method and the skeletal maturity assessed by HWM method (Spearman's correlation coefficient: 0.904-0.905) Even though midpalatal suture maturation stage assessment needs an exhaustive training and calibration process, it is a valid method to evaluate skeletal maturation or bone fusion. From a clinical perspective, for patients at CS4, CS5 and CS6, an assessment of the midpalatal suture on CBCT is indicated. A similar assessment should be done in patients at SMI 7-9.
En 2013, se propuso un nuevo método para la evaluación del estadio de maduración de la sutura palatina mediana para la evaluación de los pacientes antes de realizar la expansión maxilar. En este estudio, nuestro objetivo fue analizar la asociación entre las etapas de maduración de la sutura palatina mediana evaluada en CBCT, según el método descrito por Angelieri et al., y otros métodos objetivos utilizados para evaluar la maduración esquelética o la fusión ósea. Se realizó una búsqueda en las bases de datos PubMed, Cochrane Library, SciELO, LILACS, Web of Science y Scopus, sin restricción de idioma. Se buscó literatura no publicada en ClinicalTrials.gov, el Registro Nacional de Investigación y la base de datos Pro-Quest Dissertation Abstracts and Thesis. Se estableció contacto con los autores cuando fue necesario y se revisaron las listas de referencias de los estudios incluidos. Los términos de búsqueda incluyeron sutura palatina mediana, maduración, correlación, rendimiento diagnóstico, clasificación, evaluación, valoración y relación. La evaluación de la calidad se realizó mediante la herramienta de Estudios transversales y de cohortes observacionales desarrollada por el Instituto Nacional del Corazón, los Pulmones y la Sangre. Once estudios cumplieron con los criterios de inclusión. Del total de estudios incluidos, el 81.9% tuvo calidad regular y el 18.1% calidad buena, respectivamente. Ocho de once estudios evaluaron la correlación entre el método de maduración de la sutura palatina mediana y la madurez esquelética evaluada por el método CVM (coeficiente de correlación de Spearman: 0.244-0.908). Dos de once estudios evaluaron la correlación entre el método de maduración de la sutura palatina mediana y la madurez esquelética evaluada por el método HWM (coeficiente de correlación de Spearman: 0.904-0.905). Aunque la evaluación del estado de maduración de la sutura palatina mediana necesita un proceso exhaustivo de entrenamiento y calibración, es un método válido para evaluar la maduración esquelética o la fusión ósea. Desde una perspectiva clínica, para pacientes en CS4, CS5 y CS6, está indicada una evaluación de la sutura palatina mediana en CBCT. Se debe realizar una evaluación similar en pacientes con SMI 7-9.
Asunto(s)
Determinación de la Edad por el Esqueleto/métodos , Técnica de Expansión Palatina , Suturas , Mandíbula/crecimiento & desarrolloRESUMEN
Objetivo: A má oclusão classe III de Angle se caracteriza por protrusão mandibular, retrusão maxilar ou pela combinação de ambas. Além de prejudicar a estética facial do paciente, essa má oclusão pode causar alterações funcionais e respiratórias. Uma das alternativas de tratamento para esses casos é o uso da máscara de Petit e do aparelho disjuntor de Hyrax. Este estudo tem como objetivo avaliar por meio da cefalometria ortodôntica se o tratamento com expansão maxilar em conjunto com a tração reversa da maxila diminuem os agravos estéticos e funcionais do paciente Classe III. Relato de caso: o relato de caso descrito no presente trabalho é sobre uma paciente que foi submetida a esse tratamento, sendo descrito por meio de análises cefalométricas, exames radiográficos, fotos intrabucais e achados clínicos. Considerações finais: A verificação dos resultados obtidos após o término do tratamento mostrou que a paciente teve uma boa adesão ao uso desses aparelhos e obteve resultados satisfatórios na sua função mastigatória, na sua oclusão e na sua estética facial e dentária.(AU)
Objective: Angle class III malocclusion is characterized by mandibular protrusion, maxillary retrusion or a combination of both. In addition to impairing the patient's facial aesthetics, this malocclusion can cause functional and respiratory changes. One of the treatment alternatives for these cases is the use of the Petit mask and the Hyrax breaker device. This study aims to evaluate, through orthodontic cephalometry, whether the treatment with maxillary expansion in conjunction with the reverse traction of the maxilla reduces the aesthetic and functional problems of Class III patients. Case report: the case report described in the present work is about a patient who underwent this treatment, being described through cephalometric analysis, radiographic examinations, intraoral photos and clinical findings. Final considerations: The verification of the results obtained after the end of the treatment showed that the patient had a good adherence to the use of these devices and obtained satisfactory results in her masticatory function, in her occlusion and in her facial and dental aesthetics.(AU)
Asunto(s)
Humanos , Femenino , Niño , Aparatos Ortodóncicos , Técnica de Expansión Palatina/instrumentación , Maloclusión de Angle Clase III/terapia , Radiografía Dental , Cefalometría , Resultado del Tratamiento , Maloclusión de Angle Clase III/diagnóstico por imagenRESUMEN
Abstract Objective To compare polysomnographic parameters with others from the literature in order to provide more accurate information about Rapid Maxillary Expansion (RME) for treating Obstructive Sleep Apnea (OSA) in children, through raising the question: Is RME a good option for treating OSA in children? Prevention of mouth breathing during children's growth remains a challenge with significant clinical consequences. In addition, OSA induces anatomofunctional changes during the critical period of craniofacial growth and development. Methods The Medline, PubMed, EMBASE, CINAHL, Web of Science, SciELO and Scopus electronic databases were searched up to February 2021 for systematic reviews with meta-analysis in the English language. Among 40 studies on RME for treating OSA in children, we selected seven in which polysomnographic measurements of the Apnea-Hypopnea Index (AHI) had been made. Data were extracted and examined in order to clarify whether any consistent evidence exists for indicating RME as a treatment for OSA in children. Results We found no consistent evidence favoring RME for long-term treatment of OSA in children. All the studies presented considerable heterogeneity due to variability of age and length of follow-up. Conclusion Through this umbrella review, the need for methodologically better studies on RME is supported. Moreover, it can be considered that RME is not recommended for treating OSA in children. Further studies and more evidence identifying early signs of OSA are necessary in order to achieve consistent healthcare practice.
RESUMEN
The objective of present research was to propose a new definition for the midpalatal suture (MPS) maturational stages through reevaluation of intermediate stages B, C and D. The sample was composed by 158 cone-beam computed tomography (CBCT) of individuals between 11 and 20 years of age (±15.4 years, 86 females and 71 males), divided into two groups: 74 individuals aged 11-15 years and 84 individuals aged 16-20 years. The CBCT scans were applied to evaluate midpalatal suture maturation status and comprised stages previously classified as B (29), C (92) and D (37). Each axial image was subdivided into six parts in the anteroposterior direction, and each portion was classified according to MPS maturational evaluation methodology. New definitions of stages were proposed. The reliability of the method was tested by two examiners and the intra- and inter-examiner concordances were defined for each evaluation through weighted kappa coefficients and 95% confidence intervals. The chi-square test was used to compare the groups. In all statistical tests, a significance level of 5% was adopted. Two new maturational stages were defined: sub-stage C- and sub-stage C+, with prevalence of 12% and 8.9%, respectively, in 11 to 20-year-olds. The redefinition and validation of the maturational stages of MPS, considering the sub-stages C- and C+, may allow to elucidate the difference in the prognosis of Rapid Maxillary Expansion among individuals aged 11 to 20 years. This data should be confirmed through a clinical study.(AU)
O objetivo da presente pesquisa foi propor uma nova definição para os estágios maturacionais da sutura palatina média (MPS) por meio da reavaliação dos estágios intermediários B, C e D. A amostra foi composta por 158 tomografias computadorizadas de feixe cônico (TCFC) de indivíduos entre 11 e 20 anos de idade (±15,4 anos, 86 do sexo feminino e 71 do sexo masculino), divididos em dois grupos: 74 indivíduos de 11 a 15 anos e 84 indivíduos de 16 a 20 anos. Os exames de TCFC foram aplicados para avaliar o estado de maturação da sutura palatina média e compreenderam os estágios previamente classificados como B (29), C (92) e D (37). Cada imagem axial foi subdividida em seis partes no sentido anteroposterior, e cada porção foi classificada de acordo com a metodologia de avaliação maturacional MPS. Novas definições de estágios foram propostas. A confiabilidade do método foi testada por dois examinadores e as concordâncias intra e interexaminadores foram definidas para cada avaliação por meio de coeficientes kappa ponderados e intervalos de confiança de 95%. O teste do qui-quadrado foi utilizado para comparar os grupos. Em todos os testes estatísticos adotou-se o nível de significância de 5%. Dois novos estágios maturacionais foram definidos: subestágio C- e subestágio C+, com prevalência de 12% e 8,9%, respectivamente, em jovens de 11 a 20 anos. A redefinição e validação dos estágios maturacionais da MPS, considerando os subestágios C- e C+, podem permitir elucidar a diferença no prognóstico da Expansão Rápida da Maxila entre indivíduos de 11 a 20 anos. Esses dados devem ser confirmados por meio de um estudo clínico.(AU)
RESUMEN
La pérdida ósea en el sector anterior, ya sea por un defecto horizontal, vertical o combinado, actualmente es un desafío, no sólo por la integración del implante, sino por la estética involucrada. Entre las técnicas de regeneración ósea que permiten solucionar estos defectos, cabe destacar la técnica de expansión de crestas. Se presenta el caso de una paciente de 58 años con reborde atrófico, que se sometió a la expansión de crestas con colocación simultánea de implantes en sector anterior, con xenoinjerto previo a técnica de expansión de crestas con piezoeléctrico, colocación simultánea de implantes Narrow Connection SLActive Straumann. Se logró ganancia ósea y estabilidad primaria de los implantes, sin complicaciones. En escenarios seleccionados, la técnica de expansión de crestas de manera predecible permite ganancia de hueso horizontal adecuada, el éxito de los implantes con tasa de supervivencia y mínimas complicaciones intra y postoperatorias (AU)
Bone loss in the anterior sector, both a horizontal, vertical or combined defect is a challenge today; not only for the integration of the implant but also the aesthetic involved. There are techniques of bone regeneration that help us to solve this type of defects, among them we should highlight the crest expansion technique. We present the case of a 58-year-old patient with atrophic flange, who underwent the expansion of crests with simultaneous placement of implants in the anterior sector, with xenograft prior to the piezoelectric crest expansion technique, Simultaneous placement of Narrow Connection SLActive Straumann implants, bone gain and primary stability of the implants were obtained, without complications. In selected scenarios, the crest expansion technique could be considered a predictable approach that demonstrates a high implant survival rate, adequate horizontal bone gain, and minimal intra- and postoperative complications (AU)
Asunto(s)
Humanos , Femenino , Persona de Mediana Edad , Implantación Dental Endoósea/métodos , Aumento de la Cresta Alveolar/métodos , Osteotomía/métodos , Piezocirugía/métodos , XenoinjertosRESUMEN
Ameloblastoma is a benign, locally aggressive neoplasm that constitutes about 1–3% of the tumors of the jaw. Wide surgical excision with adequate safe margin is the most common treatment of choice. The study aimed to manage cases with unicystic ameloblastoma while preserving the continuity of the mandible (without resection). This article presents a series of cases ranging from 18 to 40 years old patients of both sexes with unicystic ameloblastoma, especially in the mandible showing more male predilection than female. All the cases presented in this article were treated by enucleation and curettage. None of the patients presented post?operative paresthesia. None of the cases went in for resection. Post?operative recovery was uneventful in all the patients. All the patients were followed up for a period of 3.5–5 years. None of the cases reported recurrence at the date of publication.
RESUMEN
Con el objetivo de tratar mediante implantes dentales zonas de tejido óseo incipiente y minimizar el uso de técnicas más invasivas, surge la oseodensificación (OD), una técnica realizada mediante la utilización de fresas Densah®, diseñadas para aumentar la densidad ósea, desplazando y condensando el tejido óseo circundante al fresado. El objetivo del estudio fue determinar los cambios dimensionales en ancho y altura del reborde óseo alveolar (ROA) en zonas posteriores del maxilar utilizando la técnica de OD, 3 meses posterior a realizada la cirugía. Se realizaron evaluaciones imagenológicas mediante Cone-Beam-CT (preoperatorio y mínimo 3 meses postoperatorio) a 9 pacientes, en los que se instalaron 10 implantes, divididos según instalación mediata e inmediata. En ambos grupos, se midió el ancho del ROA tanto a nivel marginal, utilizando como referencia el plano de la cresta ósea vestibular (COV), como 4 mm apical al plano COV. También se midió la altura del ROA con relación al plano COV y al piso del seno maxilar (PSM). Las comparaciones se realizaron mediante el análisis estadístico prueba t student-muestras pareadas. Los datos imagenológicos mostraron un valor de p<0,05 para la expansión ósea, tanto en ancho (solo implantes mediatos, media 2,11 ± 1,66 mm) como en altura con relación a PSM (implantes mediatos e inmediatos, medias de 2,28 ± 2,21 y 1,88 ± 1,82 respectivamente). La técnica de OD resultó ser efectiva en generar un aumento, tanto en ancho de implantes mediatos a nivel del plano COV como en altura del ROA en implantes mediatos e inmediatos.
In order to treat areas of incipient bone tissue with dental implants and minimize the use of more invasive techniques, osseodensification (OD) is a technique performed using Densah® drills, designed to increase bone density by displacing and condensing the bone tissue surrounding the drill. To determine the dimensional changes in width and height of the alveolar bone ridge (ABR) in posterior regions of the maxilla using the OD technique, 3 months after surgery. Imaging evaluations were performed by Cone- Beam-CT (preoperative and at least 3 months postoperative) in 9 patients, in whom 10 implants were installed, divided according to mediate and immediate installation. In both groups, the width of the ABR was measured both at the marginal level, using the vestibular osseous ridge plane (VOR) as a reference, and 4 mm apical to the VOR plane. The height of the ROA was also measuredin relation to the VOR plane and the maxillary sinus floor (MSF). Comparisons were performed by student t-test paired-samples statistical analysis. Imaging data showed a value of p<0.05 for bone expansion, both in width (mediated implants only, mean 2.11±1.66 mm) and height in relation to PSM (mediated and immediate implants, means of 2.28±2.21 and 1.88±1.82 respectively). The OD technique proved to be effective in generating an increase in width of dental implants mediated at the level of the VOR plane and in height of the ABR (mediated and immediate implants).
RESUMEN
Objective@#To explore the effect of miniscrew-assisted rapid palatal expansion (MARPE) on mandible position in the treatment of adult skeletal Class Ⅰ malocclusion with maxillary transverse deficiency. @*Methods@#In this retrospective study, 20 cases of adult skeletal Class Ⅰ malocclusion with maxillary transverse deficiency treated with MARPE in our hospital from July 2019 to March 2022 were selected as research objects. CBCT data of three time points before treatment (T0), immediately after expansion (T1) and six months after retention (T2) were collected. The head position was standardized and calibrated by Dolphin software, and then mandible landmarks (left and right Condylion, left and right Gonion, Menton) were positioned. The linear distance changes of each landmark relative to the reference plane of coronal plane, axial plane and sagittal plane were measured, which represented the sagittal, vertical and horizontal displacement of mandible respectively. Repeated measurement ANOVA and LSD multiple comparison were used to evaluate the position change of each landmark.@*Results @#The Menton and right Gonion rotated clockwise at T1, and relapsed to the initial position at T2. No lateral displacement of Menton was found.@*Conclusion@#When MARPE is used to treat skeletal Class Ⅰ malocclusion with maxillary transverse deficiency, it causes a transient clockwise rotation of the mandiblar. The mandible does not show sagittal, vertical and horizontal position changes in long-term evaluation.
RESUMEN
Computer-aided diagnosis (CAD) systems play a very important role in modern medical diagnosis and treatment systems, but their performance is limited by training samples. However, the training samples are affected by factors such as imaging cost, labeling cost and involving patient privacy, resulting in insufficient diversity of training images and difficulty in data obtaining. Therefore, how to efficiently and cost-effectively augment existing medical image datasets has become a research hotspot. In this paper, the research progress on medical image dataset expansion methods is reviewed based on relevant literatures at home and abroad. First, the expansion methods based on geometric transformation and generative adversarial networks are compared and analyzed, and then improvement of the augmentation methods based on generative adversarial networks are emphasized. Finally, some urgent problems in the field of medical image dataset expansion are discussed and the future development trend is prospected.
Asunto(s)
Humanos , Diagnóstico por Computador , Diagnóstico por Imagen , Conjuntos de Datos como AsuntoRESUMEN
OBJECTIVE@#To explore the effect of hypoxia-supported umbilical cord mesenchymal stem cell (UC-MSC) on the expansion of cord blood mononuclear cell （MNC） in vitro.@*METHODS@#The isolated cord blood mononuclear cells were inoculated on the preestablished umbilical cord mesenchymal stem cell layer and cultured under hypoxic conditions (3％ O2) and the experimental groups were normoxia (MNCs were cultured under normoxic conditions), hypoxia (MNCs were cultured under hypoxic conditions), UC-MSC (MNCs were cultured with UC-MSC under normoxic conditions), and UC-MSC+hypoxia (MNCs were cultured with UC-MSC under hypoxic conditions). To further investigate the combinational effect of 3 factors of SCF+FL+TPO (SFT) on expansion of cord blood MNCs in vitro in hypoxia-supported UC-MSC culture system, the experiments were further divided into group A (MNCs were cultured with UC-MSC and SFT under normoxic conditions), group B (MNCs were cultured with UC-MSC under hypoxic conditions), group C (MNCs were cultured with UC-MSC and SFT under hypoxic conditions). The number of nucleated cells (TNC), CD34+ cell, CFU and CD34+CXCR4+, CD34+CD49d+, CD34+CD62L+ cells of each groups were detected at 0, 7, 10 and 14 days, respectively.@*RESULTS@#Compared with group hypoxia and UC-MSC, group UC-MSC+hypoxia effectively promoted the expansion of TNC, CD34+ cell and CFU, and upregulated the expression level of adhesion molecule and CxCR4 of the cord blood CD34+ cell（P<0.05）. After culturing for 14 days, compared with group A and group B, group C effectively promoted the expansion of cord blood MNC at different time points（P<0.05）, and the effect of group A was better than that of group B at 7 and 10 days（P<0.05）.@*CONCLUSION@#Hypoxia-supported UC-MSC efficiently promoted the expansion and expression of adhesion molecule and CXCR4 of cord blood CD34+ cell, and the effect of expansion could be enhanced when SFT 3 factors were added.