RESUMEN
SUMMARY: This work investigated the morphology of the root canal system of the mandibular first molar in a Malaysian subpopulation. Using micro-computed tomography with an isotropic resolution of 22 µm, 140 mandibular first molars were scanned. MIMICS software was used for segmentation, 3-D reconstruction and analysis of the acquired images. The canal configuration was described using Vertucci [supported by the supplementary configurations proposed by Sert & Bayirli (2004)] and Ahmed et al. (2027), coding systems. The chi-square test was used to assess the association between qualitative variables. By non-considering intercanal communications, Vertucci types IV (17.1%) and I (76.4%) were the most frequently reported configurations in the mesial and distal roots, respectively. Of the reported configurations, 24.3% and 4.3% were non-classifiable by Vertucci system in the mesial and distal roots, respectively. Up to 63.6% and 9.3% of the reported configurations were non- classifiable, and type I was the most frequent when considering intercanal communications (7.1% and 76.4% in the mesial and distal roots, respectively). According to Ahmed et al., system, almost half of the sample had more than four digits (47.9%), followed by the 3-digits category (20.71%). In both systems, a significant association was found between the canal configuration and the root type (p<0.001). The mandibular first molar of this Malaysian subpopulation demonstrated a wide range of root canal morphology. When compared to the Vertucci system, the system developed by Ahmed et al., successfully classified all molars configurations despite their level of complexity. The complex canal anatomy of mandibular first molars in this subpopulation warrants special attention during root canal treatment procedures.
En este trabajo se investigó la morfología del sistema de conductos radiculares del primer molar mandibular en una subpoblación de Malasia. Utilizando tomografía microcomputada con una resolución isotrópica de 22 µm, se escanearon 140 primeros molares mandibulares. Se utilizó el software MIMICS para segmentar (enmascarar), reconstruir en 3D, visualizar y analizar las imágenes adquiridas. La configuración del canal se describió utilizando Vertucci respaldado por las configuraciones complementarias propuestas por Sert & Bayirli (2004)] y Ahmed et al. (2017, 2020), sistemas de codificación. Se utilizó la prueba de chi-cuadrado para evaluar la asociación entre variables cualitativas. Sin considerar las comunicaciones intercanales, los tipos Vertucci IV (17,1%) y I (76,4%) fueron las configuraciones reportadas con mayor frecuencia en las raíces mesiales y distales, respectivamente. De las configuraciones reportadas, el 24,3 % y el 4,3 % fueron no clasificables por el sistema de Vertucci en las raíces mesial y distal, respectivamente. Hasta el 63,6 % y el 9,3 % de las configuraciones reportadas fueron no clasificables, siendo la tipo I la más frecuente al considerar las comunicaciones intercanales (7,1 % y 76,4 % en las raíces mesiales y distales, respectivamente). Según Ahmed et al. (2017, 2020) en el sistema, casi la mitad de la muestra tenía más de cuatro dígitos (47,9 %), seguido por la categoría de 3 dígitos (20,71 %). En ambos sistemas se encontró una asociación significativa entre la configuración del canal y el tipo de raíz (p<0,001). El primer molar mandibular de esta subpoblación de Malasia demostró una amplia gama morfológica del conducto radicular. En comparación con el sistema Vertucci, el sistema desarrollado por Ahmed et al. (2017, 2020) clasificaron con éxito todas las configuraciones de los molares a pesar de su nivel de complejidad. La compleja anatomía del canal de los primeros molares mandibulares en esta subpoblación merece una atención especial durante los procedimientos de tratamiento de conducto.
Asunto(s)
Humanos , Cavidad Pulpar/diagnóstico por imagen , Microtomografía por Rayos X , Diente Molar/diagnóstico por imagen , Cavidad Pulpar/anatomía & histología , Malasia , Diente Molar/anatomía & histologíaRESUMEN
Abstract This study evaluated the correlation between root canal curvature and the effects of ultrasonic irrigation in the following parameters: volume of uncontrolled dentin removal (UDRVol), maximum depth of dentin defects, removal of accumulated hard tissue debris (AHTD), and canal transportation in prepared curved root canals. Twenty-four human permanent mandibular molars were divided into two groups according to root canal curvature: moderate curvature (MC: mean 25°); and severe curvature (SC: mean 48°). The specimens were scanned using an X-ray microcomputed scanner (Skyscan 1172) before and after cleaning and shaping and after the final irrigation protocol with ultrasonic irrigation. There was a moderate correlation between the degree of root canal curvature and the volume of remaining AHTD (p<0.05) and between the degree of root canal curvature and maximum depth of defects due to uncontrolled removal of dentin (p<0.05). The teeth in the SC group had a greater maximum depth of defects on the dentin wall in the apical third than the teeth in the MC group (p <0.05). Both groups had a significant reduction of AHTD in all canal thirds, but the amount of remaining AHTD in the middle and apical thirds and the whole canal was significantly greater in the SC than in the MC group (p <0.05). Canal transportation was not influenced by the canal curvature in all thirds (p >0.05). This study concluded that root canal curvature affects significantly the uncontrolled removal of dentin and remaining AHTD volume after the final irrigation protocol with ultrasonic irrigation.
Resumo Este estudo avaliou a correlação entre a curvatura do canal radicular e os efeitos da irrigação ultrassônica nos seguintes parâmetros: volume de remoção não controlada de dentina (UDRVol), profundidade máxima do desgaste de dentina, remoção de debris de tecido duro acumulado (AHTD) e transporte em canais radiculares curvos. Vinte e quatro molares inferiores humanos permanentes foram divididos em dois grupos de acordo com a curvatura do canal radicular: curvatura moderada (MC: média de 25°); e curvatura acentuada (SC: média de 48°). Os espécimes foram digitalizados usando um scanner microcomputador de raios X (Skyscan 1172) antes e depois da limpeza e modelagem e após a irrigação ultrassônica. Houve uma correlação moderada entre o grau de curvatura do canal radicular e o volume de AHTD remanescente (p<0,05) e entre o grau de curvatura do canal radicular e a profundidade máxima de defeitos devido à remoção descontrolada de dentina (p<0,05). Os dentes do grupo SC apresentaram maior profundidade máxima de defeitos na parede dentinária no terço apical do que os dentes do grupo MC (p<0,05). Ambos os grupos tiveram uma redução significativa de AHTD em todos os terços do canal, mas a quantidade de AHTD remanescente nos terços médio e apical e em todo o canal foi significativamente maior no grupo SC do que no grupo MC (p <0,05). O transporte do canal não foi influenciado pela curvatura do canal em todos os terços (p > 0,05). Este estudo concluiu que a curvatura do canal radicular afeta significativamente a remoção descontrolada de dentina e o volume remanescente de AHTD após a irrigação ultrassônica.
RESUMEN
Changes in structure of oral solid dosage forms (OSDF) elementally determine the drug release and its therapeutic effects. In this research, synchrotron radiation X-ray micro-computed tomography was utilized to visualize the 3D structure of enteric coated pellets recovered from the gastrointestinal tract of rats. The structures of pellets in solid state and in vitro compendium media were measured. Pellets in vivo underwent morphological and structural changes which differed significantly from those in vitro compendium media. Thus, optimizations of the dissolution media were performed to mimic the appropriate in vivo conditions by introducing pepsin and glass microspheres in media. The sphericity, pellet volume, pore volume and porosity of the in vivo esomeprazole magnesium pellets in stomach for 2 h were recorded 0.47, 1.55 × 108 μm3, 0.44 × 108 μm3 and 27.6%, respectively. After adding pepsin and glass microspheres, the above parameters in vitro reached to 0.44, 1.64 × 108 μm3, 0.38 × 108 μm3 and 23.0%, respectively. Omeprazole magnesium pellets behaved similarly. The structural features of pellets between in vitro media and in vivo condition were bridged successfully in terms of 3D structures to ensure better design, characterization and quality control of advanced OSDF.
RESUMEN
Defining and visualizing the three-dimensional (3D) structures of pharmaceuticals provides a new and important tool to elucidate the phenomenal behavior and underlying mechanisms of drug delivery systems. The mechanism of drug release from complex structured dosage forms, such as bilayer osmotic pump tablets, has not been investigated widely for most solid 3D structures. In this study, bilayer osmotic pump tablets undergoing dissolution, as well as after dissolution in a desiccated solid state were examined, and visualized by synchrotron radiation micro-computed tomography (SR-μCT). In situ formed 3D structures at different in vitro drug release states were characterized comprehensively. A distinct movement pattern of NaCl crystals from the push layer to the drug layer was observed, beneath the semi-permeable coating in the desiccated tablet samples. The 3D structures at different dissolution time revealed that the pushing upsurge in the bilayer osmotic pump tablet was directed via peripheral "roadways". Typically, different regions of the osmotic front, infiltration region, and dormant region were classified in the push layer during the dissolution of drug from tablet samples. According to the observed 3D microstructures, a "subterranean river model" for the drug release mechanism has been defined to explain the drug release mechanism.
RESUMEN
ObjectiveTo study the effect of Jinlida granules on visceral fat accumulation and its induced inflammatory response in prediabetic rats. MethodMale SD rats were randomly divided into normal group, model group, Jinlida low-dose group (1.5 g·kg-1), Jinlida high-dose group (3.0 g·kg-1) and atorvastatin group (10 mg·kg-1). Prediabetic rat model was established using high-carbohydrate, high-fat diet combined with low-dose streptozotocin (STZ) by multiple small-dose intraperitoneal injections. After 8 weeks of modeling and drug intervention for 13 consecutive weeks, body weight, oral glucose tolerance test(OGTT), fasting blood glucose (FBG), fasting insulin (FINS), insulin resistance index (HOMA-IR), total cholesterol (TC), low-density lipoprotein cholesterol (LDL-C) and high-density lipoprotein cholesterol (HDL-C) were measured in each group of rats. The content of visceral fat was quantified by micro-computed tomography (Micro-CT). Hematoxylin-eosin staining (HE) was used to observe the pathological changes of fat cells. The levels of tumor necrosis factor-α (TNF-α) and interleukin- 6 (IL-6) in rat visceral fat and serum were determined by enzyme linked immunosorbent assay (ELISA). The expression of macrophage marker CD68 in visceral fat was detected by immunofluorescence and Western blot. ResultCompared with normal group, model group had increased oral glucose tolerance, FBG, FINS, HOMA-IR, TC, LDL-C (P<0.01), elevated body weight and visceral fat accumulation (P<0.05, P<0.01), enhanced CD68 protein expression and TNF-α and IL-6 levels (P<0.01), decreased HDL-C (P<0.01), and abnormal hypertrophy of adipocytes. Compared with model group, Jinlida high- and low-dose groups lowered oral glucose tolerance, HOMA-IR, TC and LDL-C (P<0.05, P<0.01), body weight and visceral fat accumulation (P<0.05), and CD68 protein expression and TNF-α and IL-6 levels (P<0.05, P<0.01) and lessened hypertrophy of fat cells. ConclusionJinlida can improve the insulin resistance in prediabetic rats by reducing visceral fat accumulation and its induced inflammatory response, which provides a new pharmacological basis for clinical treatment of prediabetes by Jinlida granules.
RESUMEN
ABSTRACT: The aim of the study was to investigate the fracture strength of different composite resins and the quantity of voids in conventional posterior composite, high- flow flowable composite, bulk-fill flowable composite, and fiber-reinforced composite. Forty-four caries-free, freshly extracted mandibular premolars were used for this study. Teeth were prepared for cavity and root canal treatment. Subsequently, root canal treatment was applied to the teeth and cavities in order to prepare them for restorations. The specimens were then divided into four groups: group-1: Estelite Posterior; group-2: Estelite Flow Quick High Flow; group-3: Estelite Bulk-fill Flow; group-4: everX Posterior. One specimen from each experimental group was examined using micro-CT to perform measurement of voids. The fracture strength values of high-flow flowable, bulk-fill flowable, fiber-reinforced, and conventional micro- hybrid composites were found to be similar (p=0.497). EverX Posterior showed the highest fracture strength values (841.1±149.4 N), followed by Estelite Bulk-fill Flow (822.8±170.8 N). Volume of voids (%) obtained from Micro-CT analysis revealed that restorations with high-flow liner or bulk-fill flowable exhibited more voids. The fiber-reinforced composite showed the lowest percentage volume of incorporating voids and the highest fracture strength results.
RESUMEN: El objetivo del estudio fue investigar la resistencia a la fractura de diferentes resinas compuestas y la cantidad de burbujas en resinas posteriores convencionales, resinas fluidas de alto flujo, resinas fluidas tipo bulk-fill y resinas reforzados con fibras. Cuarenta y cuatro premolares mandibulares libres de caries, recién extraídos, fueron usados para este estudio. Los dientes se prepararon para el tratamiento de conductos radiculares y las cavidades para prepararlos para las restauraciones. Los especímenes se dividieron en cuatro grupos: Grupo-1: Estelite Posterior; Grupo-2: Estelite Flow Quick High Flow; Grupo-3: Estelite Bulk-fill Flow; Grupo-4: everX Posterior. Un espécimen de cada grupo experimental fue examinado usando micro-CT para realizar la medición de las burbujas. Los valores de resistencia a la fractura de los compuestos de alto flujo, flujo de relleno, reforzados con fibra y microhíbridos convencionales fueron similares (p=0,497). EverX Posterior mostró los valores más altos de resistencia a la fractura (841,1±149,4 N), seguido de Estelite Bulk-fill Flow (822,8±170,8 N). El volumen de las burbujas (%) obtenido del análisis de Micro-TC reveló que las restauraciones con revestimiento de alto flujo o con flujo de relleno a granel presentaban más huecos. El compuesto reforzado con fibra mostró el menor porcentaje de volumen de incorporación de vacíos y los resultados más altos de resistencia a la fractura.
Asunto(s)
Resinas Compuestas/análisis , Resistencia FlexionalRESUMEN
Introduction: Different NiTi rotary systems have been developed to improve efficiency and retreatment success rates. Aim: To evaluate the Protaper Universal retreatment system and WaveOne instrument in removing the filling material from curved canals during retreatment. Materials and Methods: Thirty mesial root canals of extracted human mandibular molar teeth were randomly allocated into 2 groups (n=15). In the PT group, retreatment was performed with ProTaper Universal Retreatment according to the manufacturer's instructions. In the WO group, was used WaveOne Primary. ProTaper Universal F2 and F3 were used to achieve the apical diameter in both groups. The samples were scanned by micro-computed tomography pre and postoperatively to evaluate the filling material remaining. The percentage of material filling was compared between groups using Student's T test and in the same group among thirds was compared using Kruskal-Wallis followed by Dunn's post hoc test. Results: The filling material remaining was not statistically different between the groups (p≥0.05). The apical third presented a greater amount of remaining filling material when compared with the cervical third for both groups (p<0.05). Conclusion: Rotary and reciprocating techniques can effectively, but not completely, remove the filling materials from the root canal system. The apical third presented a more significant amount of remaining filling material.
RESUMEN
Abstract This in vitro study aimed to evaluate the gaps length and depth of cure of dual-cure bulk-fill resin composites inserted in box-shaped preparations. Box-shaped preparations (4 mm deep) were made in fifteen human third-molars and divided into three groups according to the resin composites (n=5): Dual-cure bulk-fill BulkEZ (BEZ); Dual-cure bulk-fill HyperFIL (HF); and Tetric Evoceram Bulk-fill (TETRIC), as control. Gaps length (%) was evaluated in tooth-restoration interface with micro-computed tomography (µCT). The restorations were sectioned, and the degree of conversion (DC) and Knoop microhardness were evaluated at five depths (0.3, 1, 2, 3, and 4 mm). Microhardness data were statistically evaluated using absolute values (KHN) and relative values (microhardness percentages in relation to top). Gaps length (%) increased in the following order: BEZ=TETRIC<HF. The microhardness percentages in relation to top significantly decreased from 2 mm for TETRIC and 3 mm for HF. BEZ had constant microhardness and DC at all depths, while HF and TETRIC presented a significant decrease on DC at 4 mm. Dual-cure bulk-fill composites did not reduce gaps compared to light-cure bulk-fill, but they can improve depth of cure of bulk-filled restorations.
Resumo O objetivo neste estudo in vitro foi mensurar as fendas e a profundidade de polimerização de compósitos resinosos bulk-fill duais inseridos em preparos em forma de caixa. Os preparos em forma de caixa (4 mm de profundidade) foram realizados em quinze terceiros molares e separados em 3 grupos, de acordo com o compósito resinoso (n = 5): Bulk-fill dual BulkEZ (BEZ); Bulk-fill dual HyperFIL (HF); Tetric Evoceram Bulk-fill (TETRIC). O comprimento das fendas (%) foi avaliado na interface dente-restauração por meio de micro-tomografia computadorizada (µCT). As restaurações foram seccionadas e o grau de conversão (GC) e microdureza Knoop foram avaliados em cinco profundidades (0,3, 1, 2, 3 e 4 mm). Os dados de microdureza foram avaliados estatisticamente por meio de valores absolutos e relativos (porcentagens de microdureza em relação ao topo). O comprimento das fendas (%) aumentou na seguinte ordem: BEZ = TETRIC <HF. O percentual de microdureza em relação ao topo diminuiu significativamente a partir de 2 mm para TETRIC e 3 mm para HF. BEZ apresentou percentuais de microdureza e de GC constantes em todas as profundidades, enquanto HF e TETRIC apresentaram decréscimo significativo no GC em 4 mm. Os compósitos resinosos bulk-fill duais não reduziram as fendas formadas quando comparados a um compósito bulk-fill fotopolimerizável; entretanto, os mesmos podem melhorar a profundidade de polimerização em restaurações de incremento único.
RESUMEN
Abstract This study evaluated the 3D quality of root-end filling, assessing the presence (volume and percentage) of marginal gaps and internal voids formed after retro-filling with three calcium silicate-based materials: MTA Angelus (Angelus Soluçoes Odontologicas, Londrina, PR, Brazil), Biodentine (Septodont Ltd., Saint Maur-des-Faussés, France) and Neo MTA Plus (Avalon Biomed Inc., Bradenton, Florida, US). Thirty human, extracted, single rooted teeth were used. Orthograde root canal treatment, root resection (3mm shorter than the apex) and retrograde cavity preparation with ultrasonic tips were performed. Teeth were divided into 3 groups (n =10 each) following a stratified randomization according to the initial volume of the root-end cavity. After retrofilling, samples were stored for 7 days. Then, two rounds of micro-CT scans were performed: soon after root-end preparation (with the cavity still empty) and 7 days after root-end filling. Marginal gaps, internal voids volume (mm3 and %), as well as, the overall defects (sum of gaps and voids) were evaluated. Statistics compared the three groups in relation to those defects. There was not statistical difference between groups regarding the marginal gaps (P≥ 0.05), the internal voids (P≥ 0.05), and the overall defects (P≥ 0.05). Median (mm3) and % of overall air-entrapment defects (gaps and/or voids) was: 0.004mm3 and 1.749% for MTA Angelus, 0.018mm3 and 6.660% for Biodentine, and 0.012mm3 and 4.079% for Neo MTA Plus. All materials had gaps and/or voids. No differences were found between MTA Angelus, Biodentine and Neo MTA Plus.
Resumo Este estudo avaliou a qualidade 3D de retro-obturações, avaliando a presença (volume e percentagem) de "gaps" marginais e "voids" internos formados a partir da retro-obturação com três materiais à base de silicato de cálcio: MTA Angelus (Angelus Soluções Odontológicas, Londrina, PR, Brasil), Biodentine (Septodont Ltd., Saint Maur-des-Faussés, França) and Neo MTA Plus (Avalon Biomed Inc., Bradenton, Flórida, US). Trinta dentes humanos unirradiculares extraídos foram usados. Após tratamento de canal ortrógrado, resecção radicular (3 mm apicais), o prepare da cavidade retrógrada com pontas ultrassônicas foi realizado. Os dentes foram divididos em três grupos (n= 10 cada) seguindo uma randomização estratificada, de acordo com o volume inicial da cavidade retrógrada. Depois da retro-obturação as amostras foram armazenadas por 7 dias. Duas rodadas de escaneamento de micro-CT foram realizadas: logo após o preparo retrógrado (com a cavidade ainda vazia) e 7 dias após a retro-obturação. O volume de "gaps" marginais e de "voids" internos (mm3 e %), bem como, os defeitos totais (soma de "gaps" e "voids") foram avaliados. Não houve diferença estatística entre os grupos em relação aos "gaps" marginais (P≥ 0,05), "voids" internos (P≥ 0,05), e aos defeitos totais (P≥ 0,05). A mediana (mm3) e porcentagem dos defeitos totais de aprisionamento de ar foi 0,004mm3 e 1,749% para o MTA Angelus, 0,018mm3 e 6,660% para o Biodentine, e 0,012mm3 e 4,079% para o Neo MTA Plus. Todos os materiais tiveram defeitos ("gaps"e/ou "voids"). Não houve diferença entre MTA Angelus, Biodentine e Neo MTA Plus.
Asunto(s)
Humanos , Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Tratamiento del Conducto Radicular , Silicatos , Compuestos de Calcio , Microtomografía por Rayos XRESUMEN
Abstract This study evaluated the efficiency of using a single instrument from three different rotary multi-file systems and compared them with that of a reciprocating single-file for endodontic retreatment by means of micro-CT. Sixty extracted canines were prepared using a size F2 ProTaper Universal file and obturated. After 30 days of storage at 37ºC and 100% humidity, the teeth were randomly divided into four groups (n=15) based on the type of instrument used to retreatment: ProTaper Next (PTN), ProTaper Gold (PTG), TRUShape 3D (TS), and WaveOne (WO). The canals were retreated using only the size 40 instrument from each system according to the manufacturer's recommendations for torque and speed. The time required to remove the filling material was recorded in seconds. The amount of initial and residual filling material and the quantity of dentin removed were assessed by means of micro-CT. Data were statistically analyzed (ANOVA and Kruskal-Wallis) at a 5% significance level. TS instruments required the highest (p<0.05) amount of time (mean, 384.80 ±144.92) compared with the WO (229.67±68.16) and PTG (248.67±64.22) and not so different from PTN instruments (327.67±133.3). No differences in the amount of dentin removed, initial and residual filling volume, and percentages of filling material were observed among the groups. The use of a single rotary instrument from the PTG, TS, and PTN systems was as effective as that of the single-file reciprocating WO system. However, none of the instruments was able to remove the filling materials completely.
Resumo Este estudo laboratorial avaliou por meio de micro-CT a eficiência do uso de um único instrumento de três sistemas rotatórios em retratamentos endodônticos, comparados a um instrumento único reciprocante. Sessenta caninos extraídos foram preparados usando o sistema ProTaper Universal (F2) e obturados. Após 30 dias de armazenamento a 37 ºC e 100% de umidade, os dentes foram divididos aleatoriamente em quatro grupos (n = 15), de acordo com o instrumento utilizado para remover as obturações endodônticas: ProTaper NEXT (PTN), ProTaper Gold (PTG), TRUShape 3D (TS) e WaveOne (WO). Os canais foram retratados usando apenas o instrumento tamanho 40 de cada sistema, seguindo as recomendações do fabricante para torque e velocidade. O tempo necessário para remover a obturação foi registrado em segundos. A quantidade de material remanescente e o volume de dentina removida foram avaliadas por meio de micro-CT. Análise estatística foi realizada (ANOVA e Kruskal-Wallis), com nível de significância de 5%. O tempo de trabalho no grupo TS foi significativamente maior (p<0.05) (média, 384,80 ± 144,92) comparado a WO (229,67 ± 68,16) e PTG (248,67 ± 64,22), e similar a PTN (327,67 ± 133,3). Não houve diferenças entre os grupos na quantidade de dentina removida e nas porcentagens de material obturador residual. O uso de apenas um instrumento rotatório dos sistemas PTG, TS e PTN foi tão eficaz quanto o do sistema WO reciprocante na remoção do material obturador. No entanto, nenhum dos instrumentos conseguiu remover completamente os materiais obturadores.
Asunto(s)
Materiales de Obturación del Conducto Radicular , Obturación del Conducto Radicular , Titanio , Preparación del Conducto Radicular , Retratamiento , Cavidad Pulpar , Diseño de Equipo , Microtomografía por Rayos X , NíquelRESUMEN
Aim:To evaluate the influence of various obturating techniques on retreatment teeth.Place and Duration of Study:Department of Conservative Dentistry and Endodontics, Institute of Dental Sciences, Jammu and Kashmir, India between December 2019 and February 2020.Methodology:Sixty extracted mandibular premolars were randomly divided into three groups (n=20) based on the obturation technique adopted which endodontic treatment i.e., cold lateral compaction, thermoplasticized and GuttaFlow techniques. The samples were evaluated using micro-computed tomography for the volume before and after the retreatment to assess the remaining amount of filling material in the canals, and also the time taken for the removal offilling material during the retreatment. Data were analyzed using ANOVA followed by Post hoc test at P < 0.05.Results:The percentage of remaining filling material was between 17%-27%. The highest percentage of remaining filling material was seen in samples obturated with GuttaFlow (P < 0.05). The time required for retreatment was highly significant in thermoplasticized technique (P < 0.05).Conclusion:The type of obturatingtechnique influenced the amount of filling material remained in the canal after retreatment and also the time taken during this removal.
RESUMEN
Abstract The effect of root canal preparation technique on microcrack initiation is a controversial issue. This systematic review aimed to assess the role of root canal preparation techniques with different kinematics (manual, rotary, reciprocating, adaptive, self-adjusting file) on microcrack initiation. In vitro and in situ studies comparing the influence of at least two different root canal preparation techniques on the initiation of dentin microcracks were searched in PubMed/MEDLINE and SCOPUS up to June 5, 2018 without language and period restriction. Two authors independently reviewed all identified titles and abstracts for eligibility. Tables were generated to summarize the included studies, and the included studies were assessed for bias. Fifty-four (n=54) articles met the eligibility criteria. The results were classified according to the method used for microcrack evaluation, and most studies that used micro-computed tomography showed no formation of new cracks after root canal preparation. In general, the instrumentation techniques induced microcrack formation when the methods were destructive, irrespective of kinematics. In relation to the apex region, when the preparation working length was set as the root canal length subtracted of 1 mm, the risk of microcrack initiation reduces. The majority of the included studies had low risk of bias for all assessed domains. Our results seem to indicate that the various root canal preparation techniques considered in this study will not cause damage to the dental structure when adequately employed and the proper methodology is applied.
Resumo O efeito da técnica de preparo do canal radicular na iniciação e/ou propagação de microfissuras dentinárias é um tema controverso. Essa revisão sistemática teve como objetivo avaliar o papel das técnicas de preparo do canal radicular com diferentes cinemáticas (manual, rotatória, reciprocante, adaptativa e self-adjusting file) na iniciação e/ou propagação de microfissuras dentinárias. Estudos in vitro e in situ comparando a influência de pelo menos duas técnicas diferentes de preparo do canal radicular foram identificados no PubMed/MEDLINE e SCOPUS até 05 de junho de 2018 sem restrição de idioma e tempo. Dois autores revisaram de maneira independente todos títulos e resumos para elegibilidade dos estudos. Tabelas foram criadas para sumarizar os estudos incluídos e os estudos foram avaliados quanto ao risco de viés. Cinquenta e quatro (54) estudos enquadraram-se nos critérios de elegibilidade. Os resultados foram classificados de acordo com o método utilizado para avaliação das microfissuras. A maioria dos estudos que utilizaram micro-tomografia não demonstraram formação de novas microfissuras após preparo do canal radicular. Em geral, técnicas de instrumentação induziram formação de microfissuras quando os métodos de avaliação foram destrutivos, independente da cinemática. Em relação a região do ápice, quando comprimento de trabalho foi definido como o comprimento do canal menos 1 mm, o risco de indução de microfissuras é reduzido. A maioria dos estudos incluídos apresentaram baixo risco de viés para todos os domínios apresentados. Nossos resultados parecem indicar que as diferentes técnicas de preparo do canal radicular não causam danos a estrutura dental quando adequadamente utilizadas e a metodologia adequada é utilizada.
Asunto(s)
Preparación del Conducto Radicular , Dentina , Cavidad Pulpar , Microtomografía por Rayos XRESUMEN
Objetivo: O objetivo deste estudo foi avaliar a influência do consumo crônico de álcool no aumento da destruição óssea periapical em ratos. Material e métodos: Foram selecionados 12 ratos machos da linhagem Wistar, aleatoriamente divididos nos grupos controle e álcool (n=6). Os ratos do grupo álcool foram submetidos à auto-administração de solução alcoólica contendo 25% de álcool puro. O grupo controle recebeu apenas água filtrada durante o estudo. Após as 5 semanas de adaptação do grupo álcool, todos os ratos foram anestesiados e a polpa dos seus primeiros molares inferiores esquerdos foi exposta à cavidade oral para indução da lesão periapical. Após 28 dias de exposição pulpar, os ratos foram sacrificados por sobredose de anestesia, e suas mandíbulas foram removidas e seccionadas para avaliação microtomográfica. As hemimandíbulas esquerdas foram fixadas e escaneadas no microtomógrafo SkyScan 1173 (Bruker, Kontich, Belgium). O tamanho da lesão periradicular foi medido a partir das imagens de microtomografia computadorizada (micro-CT), onde foram calculados a área de superfície e o volume da lesão. Também foram avaliadas a taxa percentual de ganho de peso e a ingestão de sólidos/líquidos dos grupos. Os dados foram estatisticamente analisados utilizando o teste t de Student (p<0,05). Resultados: Os animais do grupo controle tiveram uma maior taxa percentual de ganho de peso corporal e de ingestão tanto de sólidos como de líquidos (p<0,05). As lesões periapicais apresentaram maior volume e maior área nos animais do grupo álcool, em comparação ao grupo controle (p<0,05). Conclusão: O consumo crônico de álcool contribuiu para o aumento da destruição óssea periapical em casos de periodontite apical.
Objective: the aim of this study was to evaluate the influence of alcohol consumption on the increase of periapical bone destruction in rats. Material and Methods: the sample included 12 Wistar male rats, randomly assigned into a control group and an alcohol group (n=6). Rats in the alcohol group were submitted to self-administration of a 25% pure alcoholic solution. The control group received only filtered water throughout the study. After 5 weeks of adaptation to the alcohol dose, all animals were anesthetized and the pulps of their mandibular left first molar were exposed to the oral cavity to induce periapical lesion. Twenty-eight days after the pulp exposure, those rats were euthanized due to overdose of anesthesia and their mandibles were removed and sectioned to obtain a micro-computed tomographic (micro-CT) scan. The rats' left hemimandibles were fixed and scanned on the SkyScan 1173 (Bruker, Konitch, Belgium) microtomograph. The size of the periradicular lesions was measured from the images obtained on the micro-CT and the surface area and volume were calculated. It was also evaluated the weight gain rate and the ingestion of solid/liquid of both groups. Data were analyzed by the Student's t-test (p<0.05). Results: the control group showed higher rates of weight gain and ingested more solid and liquid than the alcohol group (p<0.05). Periapical lesions found in the alcohol group had higher volume and surface area than the ones of the control group (p<0.05). Conclusion: the chronic consumption of alcohol contributed to the increase of periapical bone destruction in cases of apical periodontitis
Asunto(s)
Periodontitis , Alcoholismo , Microtomografía por Rayos XRESUMEN
Abstract The purpose of this study was to evaluate the presence of residues after post space preparation (PSP) and establish whether the apical displacement of the gutta-percha was affected by the moments and methods of PSP in teeth filled by the single-cone technique. The root canals of 20 bovine incisor teeth were instrumented with Reciproc and filled with single-cone and AH Plus. The specimens were divided into 4 groups according to the moment and method of PSP (n=5): immediate with drill, immediate with thermoplasticizer, delayed with drill and delayed with thermoplasticizer. Micro-CT scans were performed before and after the PSP for residues of the root canal filling (1) and analysis of apical displacement (2). Data were analyzed by using 2-way repeated measurement ANOVA (1) and 2-way ANOVA (2) followed by the Tukey's test (a=0.05). Significance effect on the residues percentage remaining for methods (p=0.044), for moments (p=0.006), for thirds repetition (p<0.001), and for interaction between methods and thirds (p<0.001), and moments and thirds (p=0.044). Significance effect on the apical displacement of root canal filing was detected for methods (p=0.008), however no difference was found between moments (p=0.617). In general, PSP using drill resulted in more homogeneous root canal preparation, mainly when made immediately. For all other combinations between methods and moments for PSP, the middle and apical thirds presented significant higher residues remaining. Thermo method performed in both moments and the drill method performed immediately had displacement in the apical direction, representing extrusion of the root filling material.
Resumo O objetivo deste estudo foi avaliar a presença de resíduos após o alívio do canal (AC) e verificar se o deslocamento apical da guta-percha foi afetado pelos momentos e métodos de AC em dentes obturados pela técnica do cone único. Os canais radiculares de 20 dentes incisivos bovinos foram instrumentados com Reciproc e obturados com cone único e AH Plus. As amostras foram divididas em 4 grupos de acordo com o momento e método de AC (n=5): broca imediato, termocompactador imediato, broca tardio e termocompactador tardio. Escaneamentos em micro-CT foram realizados antes e após o AC para análise dos resíduos da obturação (1) e do deslocamento apical (2). Os dados foram analisados empregando ANOVA em 2 fatores com medida repetida (1), ANOVA em dois fatores (2), seguidas do teste de Tukey (α=0,05). A porcentagem de resíduos remanescentes foi influenciada pelos métodos (p=0,044), momentos (p=0,006), pelo fator de repetição terços do canal (p<0,001), e pelas interações entre métodos e terços (p<0,001), e momentos e terços (p=0,044). Já para o deslocamento apical da obturação do canal radicular foi detectada influência significativa para os métodos (p=0,008), no entanto, nenhuma diferença foi encontrada entre os momentos (p=0,617). Em geral, AC usando brocas resultou em preparo mais homogêneo dos canais radiculares, principalmente quando realizado imediatamente após a obturação. Para todas as outras combinações entre métodos e momentos de AC, o terço médio e apical apresentaram significativamente maiores resíduos remanescentes. O método termo realizado nos dois momentos e o método broca de preparo realizado imediatamente resultaram em deslocamento na direção apical, representando a extrusão do material de obturação no canal radicular.
Asunto(s)
Animales , Materiales de Obturación del Conducto Radicular , Cavidad Pulpar , Obturación del Conducto Radicular , Bovinos , Preparación del Conducto Radicular , Retratamiento , Microtomografía por Rayos X , GutaperchaRESUMEN
[Abstract] Objective The purpose of this study is to construct a high-resolution model focusing on the vascular pattern of the scaphoid by using micro CT and to provide anatomical reference for the daily clinical use. Methods The lead-based contrast was perfused from the brachial artery and then the scaphoid bone was harvested. 3D models of the scaphoid bones were constructed by using micro CT to show how arteries distributed in and on the bones. Results The arteries on the surface stretched from the distal radius covered with scaphoid fossa to the radial side of the waist and then head back to the distal ulna along the dorsoradial ridge, formed like a letter “Ⅴ”. The arteries gathered at the inflection point of the letter “Ⅴ” and the dorsal region. The tubercle region was anastomosed extensively with 3 to 5 major intraosseous vessels originated from the extraosseous vessels covering the waist and the tubercle. There are only 1 to 2 major intraosseous vessels entering the bone via a long route from the ulnar side. The vessels running in the scapholunate ligament didn’t spilt into any intraosseous branches. Conclusion The superficial vascularity formes a “Ⅴ”-like pattern. The inflection point of the letter “Ⅴ” and the dorsal region display a dense vascularization and these vessels contributed a lot to the intraosseous vascularity.
RESUMEN
Abstract Gap formation of composite resin restorations is a serious shortcoming in clinical practice. Polymerization shrinkage stress exceeds the tooth-restoration bond strength, and it causes bacterial infiltration within gaps between cavity walls and the restorative material. Thus, an intermediate liner application with a low elastic modulus has been advised to minimize polymerization shrinkage as well as gap formation. Objective: The purpose of this in vitro study was to assess gap formation volume in premolars restored with different bulk-fill composites, with and without a resin-modified glass-ionomer cement (RMGIC) liner, using x-ray micro-computed tomography (micro-CT). Methodology: Sixty extracted human maxillary premolars were divided into six groups according to bucco-palatal dimensions (n=10). Standardized Class II mesio-occluso-distal cavities were prepared. G-Premio Bond (GC Corp., Japan) was applied in the selective-etch mode. Teeth were restored with high-viscosity (Filtek Bulk Fill, 3M ESPE, USA)-FB, sonic-activated (SonicFill 2, Kerr, USA)-SF and low viscosity (Estelite Bulk Fill Flow, Tokuyama, Japan)-EB bulk-fill composites, with and without a liner (Ionoseal, Voco GmbH, Germany)-L. The specimens were subjected to 10,000 thermocycles (5-55°C) and 50,000 simulated chewing cycles (100 N). Gap formation based on the volume of black spaces at the tooth-restoration interface was quantified in mm3 using micro-computed tomography (SkyScan, Belgium), and analyses were performed. Data were analyzed using repeated-measures ANOVA and the Bonferroni correction test (p < 0.05). Results: The gap volume of all tested bulk-fill composites demonstrated that Group SF (1.581±0.773) had significantly higher values than Group EB (0.717±0.679). Regarding the use of a liner, a significant reduction in gap formation volume was observed only in Group SFL (0.927±0.630) compared with Group SF (1.581±0.773). Conclusion: It can be concluded that different types of bulk-fill composite resins affected gap formation volume. Low-viscosity bulk-fill composites exhibited better adaptation to cavity walls and less gap formation than did sonic-activated bulk-fill composites. The use of an RMGIC liner produced a significant reduction in gap formation volume for sonic-activated bulk-fill composites.
Asunto(s)
Humanos , Resinas Compuestas/química , Imagenología Tridimensional/métodos , Preparación de la Cavidad Dental/métodos , Materiales Dentales/química , Restauración Dental Permanente/métodos , Polimerizacion , Técnicas In Vitro , Ensayo de Materiales , Cementos de Resina , Análisis del Estrés Dental , Microtomografía por Rayos XRESUMEN
OBJECTIVES: The obturation quality of MTA, Biodentine, Total Fill BC root canal sealer (RCS), and warm gutta-percha (WGP) in teeth with simulated internal root resorption (IRR) was evaluated by using micro-computed tomography.MATERIALS AND METHODS: Standardized IRR cavities were created using 40 extracted maxillary central incisor teeth and randomly assigned into 4 groups (n = 10). IRR cavities were filled with MTA, Biodentine, Total Fill BC RCS (bulk-fill form) and WGP + Total Fill BC RCS. Percentage of voids between resorptive cavity walls and obturation material (external void), and inside the filling materials (internal voids) were measured.RESULTS: Total Fill BC sealer in the bulk-fill form presented significantly highest values of external and internal void percentages (p < 0.05). Biodentine showed a significantly lowest external void percentage (p < 0.05). WGP + Total Fill BC RCS presented significantly lower values of internal void percentages than all groups (p < 0.05), except Biodentine (p > 0.05).CONCLUSION: None of the filling materials were created void-free obturation in resorption cavities. Biodentine may favor its application in teeth with IRR over Angelus MTA and bulk-fill form of Total Fill BC.
Asunto(s)
Calcio , Cavidad Pulpar , Gutapercha , Incisivo , Pemetrexed , Resorción Radicular , DienteRESUMEN
It is difficult to directly observe the structural transformation inside of soft capsules if their shells are opaque. This study was designed to noninvasively in situ measure the structural characteristics of the soft capsules and internal particle distributions to reveal the intrinsic quality of the soft capsules and develop a new technique for reverse engineering and the physical stability evaluation of the soft capsules. In this research, the CT projection images of soft capsules, namely, propolis soft capsules, were collected via synchrotron radiation X-ray micro computed tomography (SR-μCT). After three-dimensional reconstruction, the structural differences of the soft capsules under long-term test and accelerated test for 6 months were quantitatively analyzed by calculating the three-dimensional structure parameters such as volume, number and distribution of the particles inside and the thickness for the wall of the capsules. There were only a small number of particles evenly distributed in the soft capsules stored under common storage condition without layering. On the other hand, the shell wall of the soft capsule turned thinner locally at the occlusal portion and the particles with strong X-ray absorption were densely distributed at the edge of the capsule wall after the accelerated test. This study revealed that the structural parameters of soft capsules obtained by SR-μCT could be used to evaluate the influence of storage environment on the physical stability of soft capsules. The technology provides a new method for quality control and evaluation for the soft capsules.
RESUMEN
Idiopathic pulmonary fibrosis (IPF) is usually accompanied with inflammatory response, especially the macrophages. The co-culture model of macrophages and fibroblast, and IPF mice model induced by bleomycin were used here to explore the role of macrophages and interleukin-6 (IL-6) in IPF. All animals welfare and experiments were performed following the regulations of the Animal Ethics Committee of Tianjin University of Traditional Chinese Medicine. The results showed that the content of IL-6 in IPF mice induced by bleomycin was significantly increased, and there was a large amount of inflammatory cell infiltration in the lungs. The results of wound-healing and immunofluorescence showed that alternative activated (M2) macrophages could induce the migration and activation of fibroblasts at 36 h, and the expression of IL-6 was increased in the co-culture system. The results of wound-healing and sirius red assay proved that IL-6 could induce the migration and activation of fibroblast. The results showed that M2 macrophages induced fibroblasts to secrete IL-6, thereby inducing the activation and migration of fibroblast, which affect the development of IPF.
RESUMEN
Aim: To evaluate the internal adaptation of some dental adhesive restorative material (Nano-composite resin /Biodentine,Nanocomposite resin / Nano- resin-modified glass ionomer and Nano-composite resin) to the primary dentinal surface usingmicro-computed tomography (Micro-CT) Materials and methods: Forty-five extracted primary molars, due to caries ororthodontic reasons, were collected provided that it has an intact buccal/ lingual surface(s) and one half to two-thirds ofroot length. The selected teeth were disinfected and stored in normal saline at room temperature. The teeth were randomlyassigned to one of the three experimental restorative groups according to the restoration type (15 per group): group A:Nanocomposite resin / Biodentine, group B: Nanocomposite resin / Nano-resin-modified glass ionomer and group C:restored totally with Nanocomposite resin. A high- resolution desktop micro-CT (Model 1172, Skyscan, Belgium) was usedto image the samples. Results: The mean rank of volumetric dimension values of the total gap at the restorative material –dentine interface demonstrated significant difference among the three groups (P= 0.003). Moreover, there was a significantdifference in the mean rank of the ratio of total gap volume/cavity volume among the three restorative groups (P=0.015).The data demonstrate that group A showed the lowest in total gap volume and mean ratio of total gap volume /cavity volumewhile group C recorded the highest value. Conclusion: Biodentine exhibited a higher internal adaptation to a dentinalsurface which is comparable to Nano resin-modified glass ionomer. The study results potentiate the importance of usingBiodentine liners under Nano-composite (sandwich technique) in terms of excellent internal adaptation, in addition to itshigh biocompatibility and easy handling as well.