Is ankle taping effective to limit the ankle dorsiflexion in a single-training session? An observational study in semi-professional basketball players

ABSTRACT BACKGROUND: Ankle taping (AT) is effective in preventing ankle sprain injuries in most common sports and is employed in rehabilitation and prevention sports. OBJECTIVE: This study aimed to investigate the effectiveness of AT to restricting excessive frontal plane ankle movements in semi-professional basketball players throughout the training session. DESIGN AND SETTING: A cross-sectional study was performed at the Universidad Europea de Madrid. METHODS: Forty male and female semi-professional basketball players were divided into two groups. The ankle dorsiflexion range of motion (ROM) and interlimb asymmetries in a weight-bearing lunge position were evaluated at four time points: 1) with no tape, 2) before practice, at 30 min of practice, and 3) immediately after practice. RESULTS: In male basketball players, no differences were observed in the right and left ankles between the baseline and 30 min and between baseline and 90 min of assessment. In female athletes, significant differences were reported between baseline and pre-training assessments for the right ankle and also significant differences between baseline and 90 min in both ankles. CONCLUSIONS: Ankle taping effectively decreased the ankle dorsiflexion ROM in male and female basketball players immediately after application. However, ROM restriction was very low after 30 and 90 min, as assessed in a single basketball practice. Therefore, the classic taping method should be revised to develop new prophylactic approaches, such as the implementation of semi-rigid bracing techniques or the addition of active stripes during training or game pauses.

Application status of risk assessment models for periodontal disease / 口腔疾病防治

@#Risk assessment models for periodontal disease provide dentists with a precise and consolidated evaluation of the prognosis of periodontitis, enabling the formulation of personalized treatment plans. Periodontal risk assessment systems have been widely applied in clinical practice and research. The application fields of periodontal risk assessment systems vary based on the distinctions between clinical periodontal parameters and risk factors. The assessment models listed below are commonly used in clinical practice, including the periodontal risk calculator (PRC), which is an individual-based periodontal risk assessment tool that collects both periodontal and systemic information for prediction; the periodontal assessment tool (PAT), which allows for quantitative differentiation of stages of periodontal disease; the periodontal risk assessment (PRA) and modified periodontal risk assessment (mPRA), which are easy to use; and the classification and regression trees (CART), which assess the periodontal prognosis based on a single affected tooth. Additionally, there are orthodontic-periodontal combined risk assessment systems and implant periapical risk assessment systems tailored for patients needing multidisciplinary treatment. This review focuses on the current application status of periodontal risk assessment systems.

Is Generative Artificial Intelligence the Next Step Toward a Personalized Hemodialysis?

ABSTRACT Artificial intelligence (AI) generative models driven by the integration of AI and natural language processing technologies, such as OpenAI's chatbot generative pre-trained transformer large language model (LLM), are receiving much public attention and have the potential to transform personalized medicine. Dialysis patients are highly dependent on technology and their treatment generates a challenging large volume of data that has to be analyzed for knowledge extraction. We argue that, by integrating the data acquired from hemodialysis treatments with the powerful conversational capabilities of LLMs, nephrologists could personalize treatments adapted to patients' lifestyles and preferences. We also argue that this new conversational AI integrated with a personalized patient-computer interface will enhance patients' engagement and self-care by providing them with a more personalized experience. However, generative AI models require continuous and accurate updates of data, and expert supervision and must address potential biases and limitations. Dialysis patients can also benefit from other new emerging technologies such as Digital Twins with which patients' care can also be addressed from a personalized medicine perspective. In this paper, we will revise LLMs potential strengths in terms of their contribution to personalized medicine, and, in particular, their potential impact, and limitations in nephrology. Nephrologists' collaboration with AI academia and companies, to develop algorithms and models that are more transparent, understandable, and trustworthy, will be crucial for the next generation of dialysis patients. The combination of technology, patient-specific data, and AI should contribute to create a more personalized and interactive dialysis process, improving patients' quality of life.

Uso de PCR digital para definir terapéuticas específicas y seguimiento en enfermedades autoinflamatorias / Use of digital PCR to define specific therapeutics and follow-up in autoinflammatory diseases

Las enfermedades autoinflamatorias (AIDs) son un grupo heterogéneo de desórdenes monogénicos o poligénicos, con características de disregulación inmune innata y/o adaptativa, cuyo mecanismo central es la autoinflamación pero también pueden presentarse con autoinmunidad e inmunodeficiencia. En estos últimos años el desarrollo de las tecnologías de secuenciación masiva han provocado una explosión en el descubrimiento de nuevos genes responsables de AIDs monogénicas. Esto remarca la importancia de implementar este tipo de estudios para llegar a un diagnóstico definitivo sobre todo en este grupo de patologías genéticamente muy diversas donde los fenotipos clínicos se solapan. Sin embargo, dada la presencia de variantes de significación incierta (VUS), los resultados pueden no ser concluyentes planteándose la necesidad de desarrollar pruebas funcionales para determinar la patogenicidad de dichas variantes genéticas. En nuestro grupo de trabajo estamos aplicando la PCR digital en gotas (ddPCR), una técnica cuantitativa de 3era generación altamente sensible, especifica y reproducible que no necesita de curvas de calibración, para desarrollar pruebas funcionales que permitan no sólo reclasificar variantes VUS para lograr diagnósticos definitivos sino también estudiar los mecanismos responsables de las principales AIDs que permitan una estratificación de las terapéuticas especificas a aplicar y de esta manera poder contribuir al diagnóstico, tratamiento y seguimiento de nuestros pacientes en forma personalizada. (AU)

Autoinflammatory diseases (AIDs) are a heterogeneous group of monogenic or polygenic disorders, with characteristics of inborn and/or adaptive immune dysregulation, whose central mechanism is autoinflammation but may also present with autoimmunity and immunodeficiency. In recent years the development of massive sequencing technologies has led to an exponential increase in the discovery of new genes responsible for monogenic AIDs. This emphasizes the importance of the implementation of this type of studies to make a definitive diagnosis, especially in this group of genetically very diverse diseases with overlapping clinical phenotypes. However, given the presence of variants of uncertain significance (VUS), the results may not be conclusive, raising the need to develop functional tests to determine the pathogenicity of these genetic variants. In our working group we are applying droplet digital PCR (ddPCR), a highly sensitive, specific and reproducible third generation quantitative technique that does not require calibration curves, to develop functional tests that allow not only to reclassify VUS variants to achieve definitive diagnoses but also to study the mechanisms responsible for the main AIDs that allow for the stratification of specific treatments to be used and thereby contribute to the individualized diagnosis, treatment, and follow-up of our patients (AU)

Organoides de cérebro como modelos de doenças de Alzheimer e Parkinson: uma revisão narrativa sobre as perspectivas para medicina regenerativa e personalizada / Brain organoids as models of Alzheimer's and Parkinson's diseases: a narrative review on perspectives for regenerative and personalized medicine

Há muitos anos a cultura celular bidimensional (2D) é utilizada como modelo de estudo de doenças, possuindo grande importância na medicina regenerativa, apesar de ainda conter limitações significativas. A fim de contornar essas limitações, a cultura celular tridimensional (3D) propõe uma organização mais complexa e sustentável que pode ser produzida a partir de células-tronco adultas (ASCs), células-tronco embrionárias (ESCs) ou células-tronco pluripotentes induzidas (iPSCs). A cultura 3D possibilitou o cultivo de células em um ambiente mais próximo do fisiológico, levando à formação de distintos tecidos órgãos-específicos. Em outras palavras, a cultura de células 3D possibilita a criação de estruturas orgânicas muito semelhantes aos órgãos de um ser humano, tanto estruturalmente, quanto funcionalmente. Desse modo, tem-se o que é chamado de organoides. O uso dos organoides tem crescido exponencialmente em ambientes in vitro, permitindo a análise e observação dos diversos fenômenos fisiológicos existentes. Como exemplo, pode-se citar os organoides cerebrais ("mini-brains") reproduzidos in vitro buscando delinear as peculiaridades e complexidades do cérebro humano, com o objetivo de compreender algumas disfunções neurológicas que acometem esse sistema, como as duas principais doenças neurodegenerativas: Doenças de Alzheimer e Parkinson. Portanto, os organoides cerebrais podem permitir notável avanço da medicina regenerativa aplicada a doenças neurodegenerativas, já que esses "mini-brains" podem ser produzidos a partir de células do próprio paciente. Isso permitirá intervenções personalizadas, como testagens farmacológicas, a fim de definir qual seria o melhor tratamento medicamentoso. Consequentemente, essa tecnologia pode permitir terapias mais eficientes e individualizadas - o que é fundamental para a Medicina Personalizada (AU).

For many years, two-dimensional (2D) cell culture has been used as a model to study diseases, having great importance in regenerative medicine, despite still having significant limitations. In order to circumvent these limitations, three-dimensional (3D) cell culture proposes a more complex and sustainable organization that can be produced from adult stem cells (ASCs), embryonic stem cells (ESCs) or induced pluripotent stem cells (iPSCs). The 3D culture enabled the cultivation of cells in an environment closer to the physiological one, leading to the formation of different organ-specific tissues. In other words, 3D cell culture makes it possible to create organic structures very similar to the organs of a human being, both structurally and functionally. In this way, we have what are called organoids. The use of organoids has grown exponentially in in vitro environments, allowing the analysis and observation of the various existing physiological phenomena. As an example, we can mention the brain organoids ("mini-brains") reproduced in vitro, seeking to delineate the peculiarities and complexities of the human brain, in order to understand some neurological dysfunctions that affect this system, such as the two main neurodegenerative diseases: Alzheimer's and Parkinson's Diseases. Therefore, brain organoids may allow a remarkable advance in regenerative medicine applied to neurodegenerative diseases, as these "mini-brains" can be produced from the patient's own cells. This will allow for personalized interventions, such as drug testing, in order to define what would be the best drug treatment. Consequently, this technology can enable more efficient and individualized therapies - which is fundamental for Personalized Medicine (AU).

Cambiando el paradigma inclusivo: las necesidades educativas personales / Changing the inclusive model: the personal educational needs

RESUMEN El paradigma inclusivo ha supuesto grandes avances en la educación de los estudiantes con necesidades educativas especiales, pero ha mantenido su etiquetaje, interpretándolos como quienes deben ser incluidos frente al resto que incluye. En este contexto, el presente artículo apuesta por un cambio hacia un paradigma personalizado en el que no se etiquete a ningún estudiante, sino que cada alumno se considere especial y diferente al resto y pueda recibir una educación adaptada a sus Necesidades Educativas Personales (NEP). Este concepto de NEP permite focalizar la atención y respuesta educativa en lo que cada niño y niña necesita para desarrollar al máximo su potencial individual, evitando caer en reduccionismos de la diversidad que perpetúen las prácticas capacitistas y segregadoras sobre los colectivos más vulnerables. Así, en este trabajo se presenta el enfoque de dicho concepto y el paradigma que lo enmarca, ofreciendo su definición y describiendo los principios en los que se basa. Así mismo, se abordan algunas de las fuentes tanto nacionales como supranacionales que toma como referencia y que justifican y avalan científicamente su propuesta, para finalmente concluir exponiendo las razones por las que este cambio conceptual y paradigmático resulta urgente y prioritario para crear verdaderas escuelas para todos.

ABSTRACT The inclusive paradigm has meant great advances in the education of students with special educational needs, but it has maintained its labeling, interpreting them as those who should be included compared to the rest that it includes. In this context, this article is committed to a change towards a personalized paradigm in which no student is labeled, but rather each student is considered special and different from the rest and can receive an education adapted to their Personal Educational Needs (PEN). This concept of PEN allows attention and educational response to be focused on what each boy and girl needs to develop their individual potential to the maximum, avoiding falling into reductionisms of diversity that perpetuate ableism and segregating practices on the most vulnerable groups. Thus, this paper presents the approach to this concept and the paradigm that frames it, offering its definition and describing the principles on which it is based. Likewise, some of the national and supranational sources that it takes as reference and that justify and scientifically support its proposal are addressed, to finally conclude by explaining the reasons why this conceptual and paradigmatic change is urgent and a priority to create true schools for all.

Preparation of 3D printed metoprolol tartrate chewable tablets and optimization of printing process / 药学学报

With the growing demand of personalized medicine for children, it is especially important to develop medicines for children. In this study, using metoprolol tartrate as model drug, we developed 3D printed chewable tablets suitable for children with automated dosage distribution using semi-solid extruded (SSE) 3D printing technology. Based on the quality by design concept, this study prepared a semi-solid material with good printability using gelatin as the substrate, constructed 3D models and printed tablets with the aid of computer-aided design. The printing parameters were optimized and determined as follows: print temperature of 35-37 ℃, print speed of 25 mm·s-1, fill rate of 15%, and number of outer profile layers of 2. Subsequently, the printing process and the quality uniformity of the tablets were verified, and a linear relationship between the dose and the number of model layers was obtained. Finally, 3D printed chewable tablets were superior in terms of appearance, dose accuracy and compliance compared with traditional split-dose commercially available tablets. In this study, 3D printed metoprolol tartrate chewable tablets with good performance were successfully prepared to address the personalized medication needs of pediatric patients.

Pharmacogenetic testing improves treatment responses in patients with PLA2R-related membranous nephropathy / 南方医科大学学报

OBJECTIVE@#To evaluate the value of pharmacogenetic testing for improving the efficacy and safety of treatment with cyclosporine, tacrolimus, and cyclophosphamide (CTX) for PLA2R-related membranous nephropathy and for determing individualized and precise treatment plans for the patients.@*METHODS@#A total of 63 patients with PLA2R-related membranous nephropathy hospitalized in the Department of Nephrology at our hospital from January, 2019 to October, 2021 were enrolled in this study. Thirty-three of the patients underwent pharmacogenetic testing before taking the immunosuppressive drugs selected based on the results of genetic screening for sensitive targets, and the other 30 patients were empirically given immunosuppressive drugs according to the guidelines (control group). The clinical efficacy and adverse effects of the immunosuppressive drugs were analyzed for all the patients. The two groups of patients were compared for demographic and biochemical parameters including 24-h urine protein, serum albumin, renal function, and serum anti-phospholipase A2 receptor antibody both before and at 3 months after the beginning of the treatment.@*RESULTS@#Among the 33 patients undergoing pharmacogenetic testing, 51.5% showed a GG genotype for cyclosporine, and 61.6% had an AG genotype for tacrolimus; for CTX, 51.5% of the patients showed a homozygous deletion and 63.6% had an AA genotype. After treatment for 3 months, serum anti-phospholipase A2 receptor antibody, 24-h urine protein, and serum albumin levels were significantly improved in pharmacogenetic testing group as compared with the control group (P < 0.05).@*CONCLUSION@#Individualized and precise administration of immunosuppressive drugs based on pharmacogenetic testing better controls proteinuria and serum antiphospholipase A2 receptor antibodies and increases serum albumin level in patients with PLA2R-related membranous nephropathy.

Introduction and Discussion of IMDRF Personalized Medical Device Regulatory Pathways / 中国医疗器械杂志

OBJECTIVE@#To interpret the key contents of the guidance of Personalized Medical Device Regulatory Pathways issued by the IMDRF, and provide reference for the improvement of China's medical device regulatory system.@*METHODS@#The regulatory requirements of personalized medical devices and point-of-care manufacture of medical device were described respectively, and the feasibility of implementing the regulation of point-of-care manufacture of medical device in China was analyzed.@*RESULTS@#The different regulatory pathways of medical devices produced at point-of-care are feasible and have different regulatory risks.@*CONCLUSIONS@#In combination with the recommendations provided by the IMDRF guidance and the clinical and regulatory realities in China, we should accelerate the improvement of the regulations and supporting documents for point-of-care manufacture of medical device in China.

Attach importance to precision and personalized treatment procedures of multiple sclerosis / 中华神经科杂志

Disease-modifying therapy (DMT), the dominating treatment for the remission stage of multiple sclerosis (MS), has reshaped the treatment situation of MS in China due to the increasing number of DMT drugs introduced since 2018. However, the current treatment status is still not satisfied because of the long-time lack of DMT drugs in the past and the latest advances in the diagnosis and treatment of MS. The treatment strategies and goals of MS advanced continuously attributed to the more clarified pathophysiology, more optional DMT drugs and more surveillance methods in disease progression and therapeutic efficacy combined with MRI and biomarkers,etc. Personalized treatment and follow-up protocol established on evidence based prognostication, drug and patient-related factors, probably will be one of the most optimal treatment algorithm in the future. Here is a comprehensive review on how to perform this personalized treatment based on national conditions.

Research on the correlation between the preference of personalized learning resource recommendation system and self-directed learning level of medical students / 中华医学教育探索杂志

Objective:To understand the preferences of medical students for the performance, function and recommendation method of personalized learning resource recommendation system, as well as the correlation with the self-directed learning ability of medical students, so as to provide a reference for further building an effective learning platform and learning resource tool.Methods:A total of 482 first-year to third-year medical students in a medical university were selected as the research subjects. The electronic self-directed learning scale and the self-designed medical education learning resources recommendation system of performance, function and recommendation method scale were used to conduct a questionnaire survey. Pearson correlation analysis was used to explore the correlation between the performance, function and recommendation method preference of medical students' information resource recommendation system and self-directed learning ability.Results:Medical students had high demand and preference for learning [(4.35±0.58) points], accuracy [(4.32±0.62) points] and timeliness [(4.32±0.62) points] of learning resource recommendation system. In terms of the function of the recommendation system, the following [(4.10±0.71) points] and sharing [(3.94±0.82) points], and searching [(4.35±0.59) points], feedback [(4.09±0.73) points] and publication [(3.80±0.88) points] in the interactive function were all highly rated. For the preference of recommendation methods, the scores of discipline connection [(4.07±0.66) points] and time line [(4.02±0.74) points] were higher. The dimensions with high relevance to self-directed learning included timeliness ( r=0.367), social attributes ( r=0.361), and the basis of similar groups ( r=0.316). Conclusion:Medical students are familiar with and have a positive attitude towards the performance, functions and recommendation methods of the learning resource recommendation system, and have a cognitive foundation for the construction of the learning resource recommendation system and related resource platforms. This system has a certain correlation with the self-directed learning ability of medical students. Promoting the construction of medical education information resources is conducive to promoting the development of self-directed learning ability of medical students.

Research progress of mechanical power in ventilator-induced lung injury / 国际生物医学工程杂志

ICU acute respiratory distress syndrome has a high morbidity and mortality rate, and these patients usually need mechanical ventilation to maintain their respiratory function during treatment. However, improper setting of mechanical ventilation parameters may lead to ventilator-induced lung injury (VILI). In order to effectively prevent the occurrence of VILI, ARDSnet recommends the use of a protective ventilation strategy with low tidal volume and limited airway plateau pressure. However, from the perspective of ventilator energy transfer, VILI is actually the result of a combination of respiratory parameters such as tidal volume, airway pressure, and respiratory rate. The mechanical power well reflects the combined effect of the above parameters and is increasingly becoming a hot topic in clinical research. In this review paper, the definitions of mechanical energy and mechanical power were introduced, and the calculation methods of mechanical power under different respiratory modes are summarized. Moreover, the clinical studies related to mechanical power and VILI and further exploration of the safety threshold of mechanical power are reviewed. It is expected to provide new ideas for the future clinical development of personalized mechanical ventilation strategies and the effective prevention of VILI.

Current situation and prospect of 3D printing technology in pharmaceutical preparations / 中国药科大学学报

@#With the rapid advancement of science and technology, the application of 3D printing technology for personalized drug manufacturing is becoming increasingly sophisticated.Compared to traditional manufacturing technology, 3D printing can easily customize preparations with specific sizes, shapes and release behaviors for personalized drug use.This review summarizes the principles of several 3D printing technologies commonly used in drug manufacturing, lists the unique advantages and application examples of 3D printing technology for pharmaceutical preparation, analyses the current research status and development trends of the global industry of drug 3D printing, and summarizes the current problems and challenges facing drug 3D printing, aiming to provide some guidance for researchers of 3D printed drugs.

Application of 3D printing technology in the precise functional reconstruction of jaws / 口腔疾病防治

@#With the development of computer-aided surgery and rapid prototyping via 3D printing technology, digital surgery has rapidly advanced in clinical practice, especially in the field of oral and maxillofacial surgery. 3D printing technology has been applied to the functional restoration and reconstruction of the jawbone. Before surgery, a 3D digital model is constructed through software to plan the scope of the osteotomy, shape the bone graft and plan the placement of the implant. Additionally, 3D models of personalized surgical instrument guides are printed prior to surgery. With these 3D-printed models and guides, accurate excision of the jaw tumor, accurate placement of the grafted bone and precise placement of implants can be achieved during surgery. Postoperative evaluation of accuracy and function shows that 3D printing technology can aid in achieving the biomechanical goals of simultaneous implant placement in jaw reconstruction, and in combination with dental implant restoration, the technology can improve patients' postoperative occlusal and masticatory functions. Nevertheless, 3D printing technology still has limitations, such as time-consuming preparation before surgery. In the future, further development of 3D printing technology, optimization of surgical plans, and alternative biological materials are needed. Based on domestic and foreign literature and our research results, we have reviewed the process and clinical application prospects of jaw reconstruction via 3D printing technology to provide a reference for oral and maxillofacial surgeons.

Research Progress on Molecular Diagnosis and Individualized Treatment for Malignant Lymphoma / 肿瘤防治研究

Lymphoma refers to a group of heterogeneous malignancies originating from the reticuloendothelial and lymphatic systems. The clinical manifestations, treatment strategies, and disease outcomes of different types of lymphoma considerably vary. Recent developments in high-throughput sequencing technologies have enhanced understanding of the pathogenesis and molecular stratification of lymphoma. In the era of new drugs, precise stratification and targeted drug selection can not only improve the prognosis of patients with lymphoma but also reduce the toxic side effects of traditional chemotherapy, ultimately achieving the accurate diagnosis and individualized treatment of tumors. This article reviews the research progress of molecular diagnosis and individualized treatment of different lymphoma subtypes and lymphoma-related research in important meetings such as ASCO, EHA, and ICML in 2023.

A biomimetic liver cancer on-a-chip reveals a critical role of LIPOCALIN-2 in promoting hepatocellular carcinoma progression

Hepatic stellate cells (HSCs) represent a significant component of hepatocellular carcinoma (HCC) microenvironments which play a critical role in tumor progression and drug resistance. Tumor-on-a-chip technology has provided a powerful in vitro platform to investigate the crosstalk between activated HSCs and HCC cells by mimicking physiological architecture with precise spatiotemporal control. Here we developed a tri-cell culture microfluidic chip to evaluate the impact of HSCs on HCC progression. On-chip analysis revealed activated HSCs contributed to endothelial invasion, HCC drug resistance and natural killer (NK) cell exhaustion. Cytokine array and RNA sequencing analysis were combined to indicate the iron-binding protein LIPOCALIN-2 (LCN-2) as a key factor in remodeling tumor microenvironments in the HCC-on-a-chip. LCN-2 targeted therapy demonstrated robust anti-tumor effects both in vitro 3D biomimetic chip and in vivo mouse model, including angiogenesis inhibition, sorafenib sensitivity promotion and NK-cell cytotoxicity enhancement. Taken together, the microfluidic platform exhibited obvious advantages in mimicking functional characteristics of tumor microenvironments and developing targeted therapies.

Metabolomics in drug research and development: The recent advances in technologies and applications

Emerging evidence has demonstrated the vital role of metabolism in various diseases or disorders. Metabolomics provides a comprehensive understanding of metabolism in biological systems. With advanced analytical techniques, metabolomics exhibits unprecedented significant value in basic drug research, including understanding disease mechanisms, identifying drug targets, and elucidating the mode of action of drugs. More importantly, metabolomics greatly accelerates the drug development process by predicting pharmacokinetics, pharmacodynamics, and drug response. In addition, metabolomics facilitates the exploration of drug repurposing and drug-drug interactions, as well as the development of personalized treatment strategies. Here, we briefly review the recent advances in technologies in metabolomics and update our knowledge of the applications of metabolomics in drug research and development.

Effectiveness of anterior cruciate ligament reconstruction with personalized femoral locator based on apex of deep cartilage / 中国修复重建外科杂志

OBJECTIVE@#To investigate the effectiveness of anterior cruciate ligament (ACL) reconstruction assisted by personalized femoral locator based on the apex of deep cartilage (ADC) combined with patient imaging data.@*METHODS@#Between January 2021 and January 2022, a total of 40 patients with primary ACL rupture were selected and randomly divided into study group (ACL reconstruction assisted by personalized femoral locator based on ADC) and control group (ACL reconstruction assisted by intraoperative fluoroscopy and traditional femoral locator), with 20 cases in each group. There was no significant difference in gender, age, body mass index, affected side, cause of injury, and preoperative International Knee Documentation Committee (IKDC) score, Lyshlom score, and Tegner score between the two groups ( P>0.05). IKDC score, Lyshlom score, and Tegner score were used to evaluate the functional recovery of the affected knee before operation and at 3, 6, and 12 months after operation. CT scan and three-dimensional reconstruction were performed before and after operation to measure the horizontal distance from ADC to the anterior cartilage margin (L) and the horizontal distance from ADC to the center of the femoral canal (I), and the anteroposterior position of the bone canal (R) was calculated by I/L; the distance from the center to the distal cartilage margin (D) was measured on the two-dimensional cross section; the R value and D value were compared between the two groups.@*RESULTS@#The operation time of the study group was significantly less than that of the control group [ MD=-6.90 (-8.78, -5.03), P<0.001]. The incisions of the two groups healed by first intention, and no complication such as intra-articular infection, nerve injury, and deep vein thrombosis of lower limbs occurred. There was no significant difference in the R value and D value between the preoperative simulated positioning and the actual intraoperative positioning in the study group [ MD=0.52 (-2.85, 3.88), P=0.758; MD=0.36 (-0.39, 1.11), P=0.351]. There was no significant difference in the actual intraoperative positioning R value and D value between the study group and the control group [ MD=1.01 (-2.57, 4.58), P=0.573; MD=0.24 (-0.34, 0.82), P=0.411]. The patients in both groups were followed up 12-13 months (mean, 12.4 months). The IKDC score, Lysholm score, and Tegner score of the two groups increased gradually with time, and there were significant differences between pre- and post-operation ( P<0.05). There was no significant difference in the scores between the two groups at each time point after operation ( P>0.05).@*CONCLUSION@#The personalized femoral locator based on ADC can accurately assist the femoral tunnel positioning in ACL reconstruction, which can shorten the operation time when compared with traditional surgical methods, and achieve satisfactory early effectiveness.

Classification optimization of traditional Chinese medicine materials based on additive physical properties of powder / 中国中药杂志

According to the method of predicting the physical properties of oily powder based on the additive physical properties of Chinese medicinal powder, Dioscoreae Rhizoma and calcined Ostreae Concha with high sieve rate and good fluidity were mixed and crushed with Persicae Semen, Platycladi Semen, Raphani Semen, Ziziphi Spinosae Semen, and other typical oily materials with high fatty oil content in proportion to obtain 23 mixed powders. Fifteen physical properties such as bulk density, water absorption, and maximum torque force were measured, and the physical properties of typical oily powders were predicted. When the mixing and grinding ratio was in the range of 5∶1-1∶1, the r value in the correlation equation between the weighted average score of the mixed powder and the powder proportion ranged from 0.801 to 0.986, and the linearity was good, indicating that the method of predicting the physical properties of oily powder based on the additive physical properties of traditional Chinese medicine(TCM)powder was feasible. The results of cluster analysis showed that the classification boundaries of the five kinds of TCM materials were clear, and the similarity of the physical fingerprints of powdery and oily materials decreased from 80.6% to 37.2%, which solved the problem of fuzzy classification boundaries of powdery and oily materials due to the lack of representativeness of oily material model drugs. The classification of TCM materials was optimized, laying a foundation for optimizing the prediction model of the prescription of personalized water-paste pills.

Analysis of personalized precision diagnosis of 156 children with suspected rare inherited metabolic diseases / 中国热带医学

@#Abstract: Objective　To explore the accurate diagnosis of children with suspected rare inherited metabolic diseases, and to compare the application value of mass spectrometry and genetic testing in the diagnosis of rare inherited metabolic diseases (IMD). Methods　The clinical information, mass spectrometry, and genetic results of children with suspected rare inherited metabolic diseases admitted to the Department of Pediatrics, the Affiliated Haikou Hospital of Xiangya Medical College, Central South University from March 2017 to December 2021 were analyzed retrospectively. Results　156 children with suspected rare inherited metabolic diseases were detected by mass spectrometry, 67 cases were positive and 89 cases were negative. Children with positive initial examination were retested, and 19 cases were positive. Among the retest positive cases, 13 cases were given genetic testing, and 9 cases were positive and 4 cases were negative. Among the initial negative cases, 54 children with poor therapeutic effect and high clinical suspicion of inherited metabolic diseases completed genetic testing, 15 cases were positive and 39 cases were negative. The results of the two detection methods were compared, the positive rate of mass spectrometry was 19.4%(13/67), and the positive rate of genetic testing was 35.8%(24/67). The continuity correction of Pearson's chi-square test of continuity correction suggested that the results of genetic testing and mass spectrometry were different, and the difference was statistically significant (P<0.05). Taking genetic testing as the gold standard, the sensitivity and specificity of mass spectrometry detection were 37.5% (95%CI:19.6%-59.2%) and 90.7% (95%CI:76.9%-97.0%), respectively. Among the 24 confirmed cases, 5 cases were diagnosed by gene panel and 19 cases were diagnosed by whole exome sequencing (WES). One case diagnosed by WES had no pathogenic mutation detected by gene panel before diagnosis. The detection of DNM1L gene c.1040C>G and AMN gene c.651+1G>C are novel pathogenic gene variants, which have clinical significance. Conclusions　The ability of mass spectrometry in the diagnosis of inherited metabolic diseases is limited. Genetic testing, especially whole exome sequencing, can be the first choice for individualized diagnosis of suspected rare inherited metabolic diseases. In addition, the new mutation sites found by WES in this study enriched the pathogenic gene mutation spectrum and provided direction for further functional biological experiments.