Application of three-dimensional scanning technology in evaluating breast symmetry in reduction mammaplasty / 中华医学美学美容杂志

Objective:To evaluate the aesthetic results of bilateral breast symmetry after reduction mammaplasty, we proposed a handheld 3D scanner-based evaluation method to achieve the desired aesthetic effects.Methods:From June 2018 to June 2019, a total of 56 female patients with an average age of 34 years (18 to 56 years) requested for bilateral breast reduction in the Department of Aesthetic and Reconstructive Breast Surgery, Plastic Surgery Hospital, Chinese Academy of Medical Sciences and Peking Union Medical College. Three-dimensional scans were performed intraoperatively in 27 cases in study group, and symmetry adjustments were made during breast contouring based on the analysis results; in the control group, a total of 29 patients did not undergo three-dimensional scans intraoperatively. Three-dimensional scans were obtained from both groups 3 months after surgery to objectively assess breast symmetry. Six third-party physicians scored the two groups based on anonymous photographs of the patients in 5 dimensions of breast symmetry to assess the symmetry of the pre- and post-operative bilateral breasts.Results:The difference in breast volume in the study group was significantly smaller bilaterally than in the control group [35.26 (20.01, 55.61) vs 110.02 (43.52, 186.30) cm 3,U=221.00, P=0.001]. The results reported by the evaluators showed that all five aspects of breast symmetry measured by breast reduction were significantly improved in the study group compared to the preoperative period ( P<0.001) and were all statistically superior to the control group ( P<0.05). Conclusions:Intraoperative three-dimensional scanning technology presents a dependable method to facilitate in optimizing bilateral breast symmetry, which in turn provides an opportunity to enhance the aesthetic outcome after reduction mammoplasty.

Current status survey of coronary CT angiography scan protocol and radiation dose in China / 中华放射学杂志

Objective:To explore current status of scanning protocol and radiation dose of coronary CT angiography (CCTA) in China from 2017 to 2018.Methods:Cluster sampling was conducted according to the number and distribution of tertiary and secondary hospitals in provinces across the country, and 75 hospitals (30 secondary hospitals and 45 tertiary hospitals) were finally included. The patients who underwent CCTA from October 2017 to May 2018 were systematically sampled, and 1 312 patients were finally included. Patients were divided into two groups according to the level of hospital. Basic clinical characteristics were collected, including age, sex, height, weight, CT scanning equipment, scanning parameters, scanning model, post-processing scheme and radiation dose. Wilcoxon rank sum test, χ 2 tes were used in statistical analysis. Radiation dose was compared between different tube voltage, scanning model and post-processing solutions groups. Results:The ratio of employing low tube voltage (≤100 kV) was 35.4% (464/1 312). The rate of using low tube voltage in different weight groups (<60, 60-90,>90 kg) were 45.0%(126/280), 39.6%(256/647), 33.3%(8/24) in tertiary hospitals respectively, and 27.8%(25/90), 18.5%(49/265), 0(0/6) in secondary hospitals respectively. The rate of using low tube voltage in different weight groups (<60, 60-90,>90 kg) was significantly higher in tertiary hospitals than in secondary hospitals (χ2=34.25, 51.05, 207.05, P<0.001). Prospective electrocardiogram triggering model was used in 38.5% (505/1 312) of the patients. Application rate of iterative reconstruction was 82.5% (1 082/1 312). Among the patients who applied iterative reconstruction, tube voltage of 120 kV and above was used in 58.8% (636/1 082) of the patients. The effective radiation dose (ED) of CCTA was 11.84 (6.33, 16.66) mSv. The ED of CCTA examination in tertiary hospitals was slightly lower than that of secondary hospitals ( Z=-5.73, P<0.001). The ED of CCTA examination using prospective electrocardiogram triggering model was lower than that of retrospective electrocardiogram triggering model ( Z=-15.76, P<0.001). The ED of CCTA examination with iterative reconstruction [11.76 (6.94, 17.58) mSv] was slightly lower than those without iterative reconstruction ( Z=-3.45, P=0.004). Conclusions:The problems were focused on tube voltage fixation, low application proportion of low tube voltage and prospective electrocardiogram triggered protocol, and nonstandard application of iterative reconstruction technology during CCTA examination in the investigated hospitals. The nonstandard scanning protocol was an important causation of high ED in CCTA examination. Although the scanning standardization degree of tertiary hospitals was higher than that of secondary hospitals, but it still did not meet the guidelines.

Digital Approach for Lip Prints Analysis in Malaysian Malay population (Klang Valley): Scanning Technique (Analisis Cap Bibir Populasi Melayu di Lembah Klang secara Digital: Teknik Imbasan) / Jurnal Sains Kesihatan Malaysia

@#Lip print is useful in forensic investigations for individual identification. The present study aimed to discriminate sex based on lip print patterns in Malaysian Malay population in Klang Valley using a scanning technique. Lip prints of 360 subjects (180 males and 180 females) were taken using the lipstick-cellophane tape technique, pasted onto A4 papers. These papers were then scanned using Brother DCP-J100 printer (300dpi resolution). The images were analysed using a software based on Suzuki and Tsuchihashi’s classification. The lip print images were divided into six sections which are upper left, upper middle, upper right, lower right, lower middle and lower left. The Pearson chi-square test showed that there are significant differences (p < 0.05) between sexes in each section except for the upper middle section. In males, type V (irregular pattern) was the dominant pattern for upper left, upper right, lower right and lower left sections (ranging from 71.1% to 86.7%) while type IV (reticular pattern) was dominant at upper and middle sections (ranging from 57.2% to 66.1%). Type IV (48.3%) was dominant in upper middle section for female, while for the rest of the sections, type V was the dominant lip print pattern (ranging from 40% to 82.8%). These results showed that sex differentiation between males and females in Malaysian Malay population, Klang Valley can be suggested to be used for identification in forensic investigation.

Application value of wide detector CT target scanning technique in the preoperative evaluation of pancreatic cancer / 中华胰腺病杂志

Objective:To explore the application value of wide detector multi-slice spiral CT target scanning technique in the preoperative evaluation of pancreatic cancer.Methods:The clinical data of 22 patients with pancreatic cancer who underwent pancreatic arterial contrast enhanced CT scanning and were diagnosed by pathology in the First Affiliated Hospital of Naval Medical University from September 2019 to October 2019 were analyzed retrospectively. The CT phantom experiment was carried out on the international standard phantom CATPHON500. By changing the scanning radiation dose, scanning mode and scanning field of view, the spatial resolution and density resolution of the image were compared and analyzed. The target scan technical parameters obtained from the experiment were applied to the late arterial phase of MDCT enhanced scan in 22 patients with pancreatic cancer. Executive current, volume scanning mode and small scanning field were used for scanning. The attenuation value (CT value) and noise value (SD value) of pancreatic cancer tissue and normal pancreatic tissue were measured at different phases, the attenuation difference and contrast signal-to-noise ratio (CNR) of the two tissues were calculated, the contrast difference between the two tissues was evaluated, and the CT values of celiac trunk, renal artery and vein, superior mesenteric artery and vein, splenic vein and portal vein were measured, and the display of tumor tissue and peripancreatic important vessels was evaluated.Results:In the phantom experiment, under the condition of the same radiation dose, the image quality of the volume scan mode was better than that of the spiral scan mode (1%@4 mm versus 1%@9 mm at 5 mGy and 1%@2 mm versus 1%@6 mm at 25 mGy). In comparison between pancreatic tumor and pancreatic tissue, the enhancement process of pancreatic tumor tissue was increased at first and then decreased, while that of pancreatic tumor tissue was slightly enhanced. The attenuation difference between pancreatic tissue and tumor tissue and CNR also increased at first and then decreased, reaching the maximum at the late arterial stage [(91.96±29.29)HU, 8.60±5.71]. The differences between each phase were statistically significant ( F values were 47.20 and 19.80 respectively, all P values <0.05). The evaluation of vascular variation and invasion showed that a better arterial phase image could be obtained on the late arterial target scan images, while taking into account the display of splenic vein, mesenteric vein and portal vein. Conclusions:The wide detector MDCT target scanning technique can improve the spatial resolution and density resolution of the image, greatly improve the contrast between tumor tissue and peripancreatic tissue and blood vessels, and provide more accurate tumor staging and resectability evaluation information for preoperative evaluation of pancreatic cancer.

Full mouth rehabilitation of a severely worn dentition using intraoral scanner and the CAD/CAM double scanning technique / 대한치과보철학회지

With the evolution of the computer-aided design/computer-aided manufacturing (CAD/CAM) technology, the intraoral scanners are playing an increasingly important role, as they are the first step towards a completely digital workflow. The CAD/CAM double scanning technique has been used to transfer the information from provisional restorations to definitive restorations. In this case, a 67-year-old male with esthetically compromised anterior teeth, generalized severe attrition of teeth, and reduced vertical dimension was treated with full mouth rehabilitation including a re-establishment of the lost vertical dimension of occlusion assisted by the crown lengthening procedure. The provisional restorations were fabricated using an intraoral scanner and the CAD/CAM double scanning technique. After the period of adaption, the definitive monolithic zirconia restorations were delivered. The CAD/CAM double scanning technique successfully transferred the occlusal and morphological characteristics, obtained from the provisional restorations, to the definitive restorations.

Accuracy of 3D digital modeling of dental arches

ABSTRACT Objective: The aim of the study was to verify and compare the accuracy of full-arch digital impressions obtained using two intraoral scanners and three scanning methodologies. Methods: A resin model created with dental 3-D printing was scanned by a reference scanner (Zfx Evolution - Zimmer Biomet, Palm Beach Gardens, FL) in order to obtain a 3D reference; the same resin model was then scanned with two different intraoral scanners (Zfx IntraScan and Carestream 3600 - CS 3600®, Carestream, Rochester, NY, USA) using: Technique A (from tooth #27 up to tooth #17); Technique B (from tooth #11 up to tooth #17 and then from tooth #21 up to tooth #27) and Technique C (from tooth #22 up to tooth #17, and then from tooth #12 up to tooth #27 - the MeshLab software v. 1.3.3 was then used to match the two scans). The scans obtained were superimposed over the reference scan by means of a software, and the volumetric discrepancies were calculated. Results: The mean results for the Zfx Intrascan scanner were: Technique A = 302.47 ± 37.42 µm; Technique B = 180.45 ± 29.86 µm; Technique C = 147.34 ± 28.23 µm. The mean results for the Carestream 3600 scanner were: Technique A = 303.59 ± 40.20 µm; Technique B = 181.53 ± 29.61 µm; Technique C = 142.28 ± 35.33 µm. Technique C, used by both scanners, produced less volumetric discrepancies compared to the other techniques. Conclusions: The scanning technique had a statistically significant effect on the quality of the scan (p< 0.0001), whereas the scanner did not present any significant influence (p= 0.91).

RESUMO Objetivo: o objetivo do presente estudo foi verificar e comparar a precisão de modelos digitais de uma arcada dentária completa obtidos utilizando-se dois tipos de scanners e três metodologias de digitalização. Métodos: um modelo de resina feito com impressão 3D foi digitalizado em um scanner de referência (Zfx Evolution - Zimmer Biomet, Palm Beach Gardens, FL) para se obter uma referência em 3D; o mesmo modelo de resina foi, então, digitalizado com dois scanners intrabucais diferentes (Zfx IntraScan e Carestream 3600 - CS 3600®, Carestream, Rochester, NY, EUA) utilizando: Técnica A (do dente #27 ao dente #17); Técnica B (do dente #11 ao dente #17 e, em seguida, do dente #21 ao dente #27); e Técnica C (do dente #22 ao dente #17 e, em seguida, do dente #12 ao dente #27 - osoftware MeshLab v. 1.3.3 foi, então, usado para mesclar as duas leituras). Em seguida, as imagens digitalizadas foram sobrepostas à imagem de referência, utilizando-se um software, e as discrepâncias volumétricas foram calculadas. Resultados: a média dos resultados para o scanner Zfx Intrascan foram: Técnica A = 302,47 ± 37,42 µm; Técnica B = 180,45 ± 29,86 µm; Técnica C = 147,34 ± 28,23 µm. A média dos resultados para o scanner Carestream 3600 foram: Técnica A= 303,59 ± 40,20 µm; Técnica B = 181,53 ± 29,61 µm; Técnica C = 142,28 ± 35,33 µm. A Técnica C, utilizada em ambos os scanners, produziu as menores discrepâncias volumétricas, quando comparada às outras técnicas. Conclusões: a técnica de digitalização teve um efeito estatisticamente significativo sobre a qualidade do modelo digital (p< 0,0001), enquanto o tipo de scanner usado não apresentou qualquer influência significativa (p= 0,91).

Full mouth rehabilitation of the patient with crossed occlusion using implant fixed prosthesis: A case report / 대한치과보철학회지

Crossed occlusion can be treated either by overdenture and telescopic denture or by placing an implant at the edentulous area to reestablish the support on the occlusion. If alveolar bony support is sufficient and an the environment where an implant is inserted is favorable to restoring the masticatory and aesthetic function of a patient, the implant-supported fixed prosthesis can provide more definitive occlusal support and more aid for other oral functions. In this case report, a patient with a severe residual alveolar bone resorption following the extraction of teeth and who had a crossed occlusion was treated with sinus bone graft and alveolar bone augmentation in order to place the implants at prosthetically position. The definitive restoration was made to reflect the patient's occlusal and aesthetic function using the CAD/CAM double scanning method. Finally, the treatment had the masticatory and aesthetic function adequately restored, which is reported here.

Implant supported prosthesis with high performance polymers using a double scanning method / 대한치과보철학회지

Nowadays, the development of dental scanner and CAD/CAM technology can facilitate the fabrication of hybrid prosthesis. Double scanning technique, scanning a trial prosthesis and master model, made it possible to realize virtual design and simplify the laboratory work. Instead of using the metal or zirconia framework with composite, ceramic or denture tooth, the new high performance polymer Polyetherketoneketone (Pekkton, Cendres+Métaux, Biel, Switzerland) as a framework with Polymethyl methacrylate (PMMA) veneering teeth (Visio-lign, Bredent, Senden, Germany) was used in this case. This case report showed an acceptable treatment outcome and satisfaction of patient using Pekkton and Visio-lign. However, long term clinical evaluation is needed.

Rehabilitation in a patient with limited restorable space using double scanning technique: A case report / 대한치과보철학회지

Loss of posterior support may cause extrusion of antagonistic teeth and excessive wear of remaining teeth which often leads to the destruction of the occlusal plane. In such cases, it is critical to verify the need to increase vertical dimension of occlusion (VDO). Should you increase VDO, provisionalization is crucial in evaluating function and esthetics. Double scanning technique is a useful method when fabricating definitive restoration that mimic provisional restoration. In this case, a patient with apparently no loss of VDO and insufficient interocclusal space for dental materials due to loss of posterior support and extrusion of antagonistic teeth was rehabilitated using double scanning technique.

Scanning skill and quality control in prostate magnetic resonance spectroscopy / 医疗卫生装备

Objective To investigate the factors influencing the image quality of prostate magnetic resonance spectroscopy (MRS),and to put forward quality control measures to improve MRS in success ratio and image quality.Methods Totally 1 255 patients with prostate diseases confirmed pathologically from October 2009 to December 2015 had their MRS data analyzed retrospectively.MRS was executed with multi-voxel 3D chemical shift imaging technique,and special-purpose software was involved in for post processing.Re-scanning would be performed in case of baseline clutter,low SNR and etc.Results There were 1 218 patients had MRS executed well in preparedness,positioning,parameters setup,post processing,baseline and chemical shift,one patient underwent unsuccessful MRS due to incorrect bed mode,9 ones due to unstable baseline resulting from unsatisfactory preparedness,26 ones due to unstable baseline resulting from bad shimming and 1 case due to non-standard post processing.Conclusion Prostate SRS depends on patient preparedness,positioning,parameters setup,shimming and post processing.

Rehabilitation using twin-stage method for a Sjögren's syndrome patient with severe discoloration and attrition on upper and lower anterior teeth / 대한치과보철학회지

Patients with Sjögren's syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a Sjögren's syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

Rehabilitation using twin-stage method for a Sjögren's syndrome patient with severe discoloration and attrition on upper and lower anterior teeth / 대한치과보철학회지

Patients with Sjögren's syndrome usually suffer from teeth discoloration and attrition due to xerostomia. If the anterior teeth are badly worn, problems such as loss of anterior guidance, occlusal disharmony, and limited space for restoration may occur. However, ideal occlusion is obtained in both centric and eccentric relation by regaining the disocclusion of the posterior teeth through the anterior and lateral guidance using twin-stage method. In this case, rehabilitation was performed for a Sjögren's syndrome patient with maxillary and mandibular incisor's severe attrition and teeth discoloration by using twin-stage method.

Full mouth implant rehabilitation with double scanning of provisional restoration / 대한치과보철학회지

It is important to produce a provisional restoration reflecting the patient's jaw relation, occlusal plane, lip support, shape of teeth, and occlusion type for fully edentulous patients before making a definite prosthesis. The patient introduced in this study showed bad prognosis of remained tooth after severe periodontal diseases. Therefore, remaining teeth were extracted and replaced with dental implants. Provisional restorations were fabricated and the the patient's vertical and horizontal jaw relationship, occlusal plane, amount of overjet and overbite, size of teeth, and length of anterior tooth were recorded. Provisional restorations were scanned and CAD/CAM techniques were used to fabricate a monolithic zirconia bridge, which contour is identical with the provisional restorations. The patient was satisfied with the treatment results on functional, esthetic aspects and the prosthesis retained stable during the four-month clinical observation period.

Diagnosis of an uncertain karyotype and mentally retarded child using the whole genome microarray scanning technique / 临床儿科杂志

Objective To investigate the possibility and feasibility of the whole genome microarray scanning technique in clinical cytogenetic diagnosis of an uncertain karyotype and mentally retarded child. Methods The karyotype analysis of the mental development delayed child was 47, XY+mar. Genomic DNA was extracted from the peripheral blood and the whole genome microarray scanning technique was used to analyze the derivative chromosome. Results The whole genome microar-ray scanning technique indicated the derivative chromosome fragment had originated from 9p13.1-p24.3. Conclusions Com-paring to conventional cytogenetic analysis methods, the whole genome microarray scanning technique is of high resolution, high-throughput and high accuracy, which can detect the submicroscopic chromosomal aberrations and replace the conven-tional karyotype analysis.

Study of techniques and postprocessing for ~(31)P MRS of human bone and soft tissue / 医疗卫生装备

Objective To investigate the best techniques and postprocessing protocols for 31P MRS of femur and soft tissue.Methods The 31P MRS was performed on the 20 normal volunteers,using Siemens SONATA 1.5T MR scanner and heart/liver 31P surface coil.The age of volunteers ranged from 18 to 25 years old.Related data came from 40 voxels of the interested region were post-processed and compared by two different kinds of methods: automatically processed(group A) and interactively processed(group B).Results In group A,only 28 of 40 studies displayed well defined spectra,another 12 can't,and the shift of PCr deviated from 0.0 ppm;In group B,35 of 40 studies produced well defined spectra,another 5 can't,and the shift of PCr was near to 0.0 ppm,(p

The Value of Vertical to Clivus CT Scanning in Diagnosing Tentorial Hernia in the Patient with Brain Trauma / 实用放射学杂志

Objective To explore the value of vertical to clivus CT scanning in diagnosing tentorial hernia and to analyze the CT findings of tentorial hernia in the patient with brain trauma. Methods Vertical to clivus CT scaning were performed in 156 cases with brain trauma.Results Vertical to clivus scanning method directly demonstrated the temporal transtentorial hernia in 72 of 156 patients with unilateral high intracranial pressure, but the orbitomeatal line scanning method was not able to show this direct finding. The CT findings of hernia were the tissue of temporal lobe appeared in the cisterna ambiens inside the tentorium accompanied by enlarged cistern on the involved side. No change of cistern were seen in 84 cases.Conclusion The scanning method with vertical to the clivus is effective in detecting tentorial hernia in the patient with cerebral trauma, it should be performed in the patient with cerebral trauma and increased intracranial pressure.