Reconstrução da região superior do dorso com retalho musculocutâneo do trapézio em V-Y baseado na artéria dorsal da escápula / Reconstruction of the upper region of the back with a V-Y trapezius musculocutaneous flap based on the dorsal artery of the scapula

Introdução: Defeitos na região superior do dorso geralmente são de difícil tratamento, especialmente nos casos de exposição de vértebras, meninge ou material de síntese. O fechamento primário com retalho muscular ou musculocutâneo é a melhor escolha, mas a área doadora para tratar grandes defeitos pode requerer enxertia. A preservação da artéria dorsal da escápula parece assegurar um território cutâneo maior do que o do retalho musculocutâneo do trapézio clássico baseado apenas na artéria cervical transversa. Método: Foi concebida uma ampla ilha triangular de pele sobre o músculo trapézio baseado na artéria dorsal da escápula com transferência por movimento pendular e um procedimento tipo V-Y em cinco pacientes após a extirpação de tumores malignos. Resultados: Os defeitos e as áreas doadoras foram fechados primariamente com total viabilidade dos retalhos e não foram observadas complicações além da ocorrência de seroma. Conclusão: O retalho musculocutâneo do trapézio baseado na artéria dorsal da escápula oferece segurança no tratamento de exposição óssea na região superior do dorso.

Introduction: Defects in the upper region of the back are generally difficult to treat, especially in cases of exposure of vertebrae, meninges, or synthetic material. Primary closure with a muscular or musculocutaneous flap is the best choice, but the donor area to treat large defects may require grafting. Preservation of the dorsal artery of the scapula appears to ensure a larger cutaneous territory than that of the classic trapezius musculocutaneous flap based only on the transverse cervical artery. Method: A wide triangular island of skin was designed over the trapezius muscle based on the dorsal scapular artery with pendulum transfer and a V-Y type procedure in five patients after the extirpation of malignant tumors. Results: The defects and donor areas were closed primarily with full viability of the flaps and no complications were observed other than the occurrence of seroma. Conclusion: The trapezius musculocutaneous flap based on the dorsal artery of the scapula offers safety in the treatment of bone exposure in the upper back region.

Prospective Study of the Assessment of Anxiety Symptoms after Minimally Invasive Lumbar Decompression / Estudo prospectivo da avaliação dos sintomas de ansiedade após descompressão lombar minimamente invasiva

Summary Objective To analyze associations between anxiety and postsurgical clinical outcomes in patients who underwent minimally invasive lumbar decompression surgery in addition to comparing symptoms of anxiety and depression before and after surgery. Methods This prospective cohort study of patients who underwent minimally invasive lumbar decompression surgery. Clinical outcomes were measured before and 6 months after surgery using the Visual Analog Scale (VAS), Global Perceived Effect of Change (GPE), Hospital Anxiety and Depression Scale (HADS), and Oswestry Disability Index (ODI). Based on the presurgical anxiety score, patients were categorized into anxious and non-anxious patients, and the outcomes were compared. Results The patients of both groups obtained similar results concerning the clinical outcomes evaluated. Preoperative HADS scores decreased significantly 6 months after surgery in both anxiety (8.70 ± 3.48 vs. 5.75 ± 3.91) and depression (6.95 ± 3.54 vs. 5.50 ± 2.99). The VAS scale for the back (-2.8 ± 3.64) and legs (-5.5 ± 3.5) showed a reduction in pain. Conclusion Minimally invasive lumbar decompression surgery promoted clinical and functional improvement, not being affected by preoperative anxiety symptoms. Mental health indicators showed a significant reduction in symptoms 6 months after surgery.

Resumo Objetivo Analisar associações entre ansiedade e desfecho clínico pós-cirúrgico em pacientes que realizaram a cirurgia de descompressão lombar minimamente invasiva, além de comparar sintomas de ansiedade e depressão antes e após a cirurgia. Métodos Trata-se de um estudo de coorte prospectiva de pacientes que realizaram a cirurgia de descompressão lombar minimamente invasiva. Os desfechos clínicos foram mensurados antes e 6 meses após a cirurgia, utilizando a escala visual analógica de dor (EVA); Global Perceived Effect of Change (GPE); Hospital Anxiety and Depression Scale (HADS) e o Oswestry Disability Index (ODI). A partir do escore de ansiedade précirúrgico, os pacientes foram categorizados em pacientes ansiosos e não ansiosos e os desfechos comparados. Resultados Os pacientes de ambos os grupos obtiveram resultados similares em relação aos desfechos clínicos avaliados. Os escores HADS pré-operatório diminuíram significantemente 6 meses após a cirurgia, tanto em ansiedade (8,70 ± 3,48 vs. 5,75 ± 3,91) quanto em depressão (6,95 ± 3,54 vs. 5,50 ± 2,99). Houve redução da dornaescalaEVA dascostas(-2,8 ± 3,64) e das pernas (-5,5 ± 3,5). Conclusão A cirurgia de descompressão lombar minimamente invasiva promoveu melhora clínica e funcional, não sendo afetada por sintomas pré-operatórios de ansiedade. Os indicadores de saúde mental evidenciaram redução significativa dos sintomas 6 meses após a cirurgia.

Análisis de la Distancia entre Hueso Occipital y Atlas en Telerradiografía Lateral de Cráneo / Analysis of the Distance Between the Occipital Bone and Atlas in Lateral Cephalograms

El conocimiento del espacio suboccipital (OA) es esencial para el clínico debido a que su disminución se asocia a posible causa de cefaleas. El objetivo de este estudio fue determinar las diferencias entre la longitud del espacio suboccipital en telerradiografías laterales entre hombres y mujeres de distintos rangos etarios. En este estudio transversal se analizaron un total de 371 telerradiografías laterales de cráneo. Se realizó estadística descriptiva y la aplicación de prueba T-Student y ANOVA para evaluar la asociación entre el espacio suboccipital con el género y la edad. La distancia media del espacio suboccipital fue de 5.62 ± 2.7 mm, siendo mayor en hombres que en mujeres (6.49 ± 2.8 mm y 5.09 ± 2.5 mm respectivamente, p<0.001). Con respecto a la edad, la distancia del espacio suboccipital no presentó variaciones significativas. La longitud del OA entre los hombres y mujeres de distintos grupos tampoco mostró diferencias significativas. Existe una gran variabilidad en la distancia del espacio suboccipital, el cual se observa más disminuido en mujeres, por lo que se sugiere un análisis individual mediante telerradiografía lateral frente a pacientes con cefaleas.

SUMMARY: Knowledge of the suboccipital space (OA) is essential for clinicians because its decrease is associated with headache. The aim of this study was to determine the differences in the length of the suboccipital space in lateral cephalograms of men and women of different age ranges. In this cross-sectional study, a total of 371 lateral cephalograms were analyzed. Descriptive statistics and the application of Student's t-test and ANOVA were performed to evaluate the association between the suboccipital space with sex and age. The mean distance of the suboccipital space was of 5.62 ± 2.7 mm, being higher in men than women (6.49 ± 2.8 mm and 5.09 ± 2.5 mm respectively, p < 0.001). Regarding age, the distance of the suboccipital space did not show significant variations. The length of the OA between men and women of different age groups also showed no significant differences. There is a great variability in the distance of the suboccipital space, which is observed to be more decreased in women; therefore, an individual analysis by lateral cephalograms is suggested in patients with chronic headaches.

Morphological Design and Study of a 3D Printed Integrated Fusion Device Based on CT Measurement Data Assisted Anterior Lumbosacral Spine / Diseño Morfológico y Estudio de un Dispositivo de Fusión Integrado Impreso en 3D Basado en Datos de Medición de TC Asistida de Columna Lumbosacra Anterior

SUMMARY: To measure and study the anatomical morphological data of the lumbar 5 to sacral 1 intervertebral space with the aid of CT and design an anatomical anterior lumbosacral 3D printed integrated interbody fusion for the treatment of degenerative lumbosacral spine diseases. 100 adults (50 of each sex) who underwent CT examination of the lumbar spine in our hospital were selected, and their lumbar 5 to sacral 1 intervertebral space anatomical data were measured, including the anterior lumbar convexity angle, different sagittal and coronal heights, and the sagittal and coronal diameters of the superior and inferior endplates. The measured data were also statistically analyzed, and morphological design and study of the 3D printed integrated fusion device in the anterior lumbosacral spine was performed by applying computer software. When comparing the coronal and sagittal diameters of the superior and inferior endplates from lumbar 5 to sacral 1, the differences were statistically greater in men than in women (P0.001). When comparing the height at different positions in the median sagittal plane, both males and females showed an anterior high and posterior low pattern. In the coronal plane, both males and females showed the highest height in the middle position (P0.001). CT can measure the anatomical data of the lumbosacral spinal hiatus more accurately. The 3D-printed anterior integrated fusion device of the lumbosacral spine designed according to the analysis of the data results is more in line with the anatomical structure of the lumbosacral spine, fits well with the superior and inferior endplates, and effectively restores the height and anterior convexity angle of the lumbosacral space.

El objetivo de este trabajo fue medir y estudiar los datos morfológicos anatómicos del espacio intervertebral lumbar 5 a sacro 1 con la ayuda de TC y diseñar una fusión intersomática integrada anatómica lumbosacra anterior impresa en 3D para el tratamiento de enfermedades degenerativas de la columna lumbosacra. Se seleccionaron en nuestro hospital 100 adultos (50 de cada sexo) que se sometieron a un examen de TC de la columna lumbar y se midieron los datos anatómicos del espacio intervertebral lumbar 5 al sacro 1, incluyendo el ángulo de la convexidad lumbar anterior, diferentes alturas sagital y coronal, y los diámetros sagital y coronal de las placas terminales superior e inferior. Los datos medidos también se analizaron estadísticamente y se realizó el diseño morfológico y el estudio del dispositivo de fusión integrado impreso en 3D en la columna lumbosacra anterior mediante la aplicación de software informático. Al comparar los diámetros coronal y sagital de las placas terminales superior e inferior desde lumbar 5 hasta sacro 1, las diferencias fueron estadísticamente mayores en hombres que en mujeres (P 0,001). Al comparar la altura en diferentes posiciones en el plano mediano, tanto hombres como mujeres mostraron un patrón anterior alto y posterior bajo. En el plano coronal, tanto hombres como mujeres mostraron la altura más alta en la posición media (P0,001). La TC puede medir los datos anatómicos del hiato espinal lumbosacro con mayor precisión. El dispositivo de fusión anterior integrado impreso en 3D de la columna lumbosacra diseñado de acuerdo con el análisis de los resultados de los datos está más en línea con la estructura anatómica de la columna lumbosacra, se adapta bien a las placas terminales superior e inferior y restaura eficazmente la altura y la parte anterior del ángulo de convexidad del espacio lumbosacro.

Quiste óseo aneurismático del atlas: Tratamiento con denosumab y reporte de caso / Aneurysmal bone cyst of the atlas: treatment with denosumab and case report

Presentamos un caso de quiste óseo aneurismático (QOA) de ubicación infrecuente y comportamiento agresivo en un paciente masculino de 28 años, en que la resección quirúrgica es controversial por el riesgo de iatrogenia y eventual recurrencia. El tratamiento con denosumab ha sido recientemente propuesto como una alternativa para el manejo de QOAs irresecables o recurrentes; sin embargo, la literatura disponible es escasa. Reportamos nuestra experiencia en un caso y analizamos la bibliografía disponible

We present a case of aneurysmal bone cyst (ABC) of infrequent location and aggressive behavior in a 28-year-old male patient, in which surgical resection is controversial due to the risk of iatrogenicity and eventual recurrence. Treatment with denosumab has been recently proposed as an alternative for the management of unresectable or recurrent ABCs; however, the available literature is sparse. We report our experience with one case and analyze the available literature

Effects of esketamine on depression-like behavior and dendritic spine plasticity in the prefrontal cortex neurons of spared nerve injury-induced depressed mice

The present study utilized the spared nerve injury (SNI) to create a mouse model of depression to investigate the impact of esketamine on depressive-like behaviors, on the expression of PSD-95 and CRMP2 proteins, and on changes in neuronal dendritic spine plasticity in the prefrontal cortex (PFC). Depressive-like behavioral tests were performed 1 h after esketamine treatment, and the PFC tissues were obtained on the fourth day after completing the behavioral tests. Then, dendritic spine density and morphology in the PFC were measured using Golgi staining, and CRMP2 and PSD-95 proteins were obtained from PFC tissue by western blotting. The results of this study showed that esketamine significantly increased the immobility time in the forced swimming test and tail suspension test. In the open field test, esketamine increased the time spent in the open arms, the time spent in the central area, and the total distance covered. It also increased the protein expression levels of CRMP2 and PSD-95 in addition to the total and mature dendritic spine density of the PFC in SNI-depressed mice. Esketamine can significantly improve depression-like behaviors in SNI-depressed mice and promote an increase in dendritic spine density and maturation in the PFC. These effects may be associated with changes in CRMP2 and PSD-95 expression.

Application value of bone cement containing rhbFGF and RHBMP-2 in PKP treatment of osteoporotic lumbar compression fracture / 中国骨伤

OBJECTIVE@#To investigate the effect of bone cement containing recombinant human basic fibroblast growth factor (rhbFGF) and recombinant human bone morphogenetic protein-2 (rhBMP-2) in percutaneous kyphoplasty(PKP)treatment of osteoporotic vertebral compression fracture(OVCF).@*METHODS@#A total of 103 OVCF patients who underwent PKP from January 2018 to January 2021 were retrospectively analyzed, including 40 males and 63 females, aged from 61 to 78 years old with an average of (65.72±3.29) years old. The injury mechanism included slipping 33 patients, falling 42 patients, and lifting injury 28 patients. The patients were divided into three groups according to the filling of bone cement. Calcium phosphate consisted of 34 patients, aged(65.1±3.3) years old, 14 males and 20 females, who were filled with calcium phosphate bone cement. rhBMP-2 consisted of 34 patients, aged (64.8±3.2) years old, 12 males and 22 females, who were filled with bone cement containing rhBMP-2. And rhbFGF+rhBMP-2 consisted of 35 patients, aged (65.1±3.6) years old, 14 males and 21 females, who were filled with bone cement containing rhbFGF and rhBMP-2. Oswestry disability index (ODI), bone mineral density, anterior edge loss height, anterior edge compression rate of injured vertebra, visual analog scale (VAS) of pain, and the incidence of refracture were compared between groups.@*RESULTS@#All patients were followed for 12 months. Postoperative ODI and VAS score of the three groups decreased (P<0.001), while bone mineral density increased (P<0.001), anterior edge loss height, anterior edge compression rate of injured vertebra decreased first and then slowly increased (P<0.001). ODI and VAS of group calcium phosphate after 1 months, 6 months, 12 months were lower than that of rhBMP-2 and group rhbFGF+rhBMP-2(P<0.05), bone mineral density after 6 months, 12 months was higher than that of rhBMP-2 and group calcium phosphate(P<0.05), and anterior edge loss height, anterior edge compression rate of injured vertebra of group rhbFGF+rhBMP-2 after 6 months and 12 months were lower than that of group rhBMP-2 and group calcium phosphate(P<0.05). There was no statistical difference in the incidence of re-fracture among the three groups (P>0.05).@*CONCLUSION@#Bone cement containing rhbFGF and rhBMP-2 could more effectively increase bone mineral density in patients with OVCF, obtain satisfactory clinical and radiological effects after operation, and significantly improve clinical symptoms.

Analysis on clinical efficacy of anterior cervical Hybrid surgery and posterior cervical expansive open-door laminopasty for multilevel cervical spondylotic myelopathy / 吉林大学学报(医学版)

Objective:To analyze the efficacy of anterior cervical Hybrid surgery and posterior cervical expansive open-door laminoplasty(EODL)in the treatment of multilevel cervical spondylotic myelopathy,and to discuss the selection of surgical methods for the patients with multilevel cervical spondylotic myelopathy.Methods:The retrospective analysis was conducted of 70 patients with multilevel cervical spondylotic myelopathy who underwent surgery at Affilated Beijing Traditional Chinese Medicine Hospital of Capital Medical University from July 2017 to July 2020.Based on the different surgical methods,the patients were divided into anterior group(n=35)and posterior group(n=35).The patients in anterior group underwent Hybrid surgery[anterior cervical discectomy and fusion(ACDF)combined with artificial cervical disc replacement(ACDR)],and the patients in posterior group underwent EODL.The hospitalization time,operation time,intraoperative blood loss,and postoperative drainage volume of the patients in two groups were recorded;the efficacy was evaluated by Japanese orthopaedic association(JOA)score,JOA improvement rate,neck disability index(NDI),visual analogue scale(VAS)for pain,and postoperative satisfaction score;the complications of the patients in two groups after surgery were recorded.Results:Compared with posterior group,the intraoperative blood loss,postoperative drainage volume,hospitalization time,and operation time of the patients in anterior group were significantly decreased(P<0.01),and the preoperative score had no significant difference(P>0.05).At the final follow-up after surgery,compared with posterior group,the JOA score and JOA improvement rate of the patients in anterior group were significantly increased(P<0.01),and the NDI score and VAS score were significantly decreased(P<0.01).Compared with before surgery,the JOA scores of the patients in two groups at the final follow-up after surgery were increased(P<0.01),and the NDI and VAS scores were significant decreased(P<0.01).The postoperative satisfaction of the patients in two groups was high based on the postoperative satisfaction score.There was no significant difference in the incidence of postoperative complication of the patients between two groups(P>0.05).Conclusion:Both the anterior cervical Hybrid surgery and EODL achieve the satisfactory results in the treatment of multilevel cervical spondylotic myelopathy.Hybrid surgery has the advantages of less bleeding and shorter surgery time,and the most suitable surgical method should be chosen clinically based on the actual situation of the patients.

Effect of ultrasound scanning route map on the learning effectiveness of cervical ultrasound for beginners / 基础医学与临床

Objective Using our team's recent research achievement"the cervical ultrasound scanning route map"as a teaching tool,to evaluate its impact on the learning effectiveness and confidence of beginners in the process of learning cervical spinal ultrasonography.Methods This study is a before and after self-control study.After recruit-ment of 40 cervical ultrasound beginners,they had completed questionnaire 1.The questionnaire was designed with three self-assessment questions on theoretical knowledge of cervical spinal ultrasound,three self-assessment ques-tions on practical skills of cervical spinal ultrasound and one question on willingness to use cervical spinal ultra-sound in the future.After traditional teaching without involving the route map,beginners completed questionnaire 2 with the same content.After a 20 min break,teacher introduced and explained the route map to the beginners,then the beginners completed questionnaire 3.Questions related to satisfaction with this learning experience had been added to questionnaire 3.The answers to all questions were scored on a scale of 1-10.In this study,the main out-come was the comprehensive learning score,calculated as(sum score of theoretical knowledge+sum score of prac-tical skills+score of willingness to use cervical ultrasound in the future)/7.Results Beginners'comprehensive learning score at the three time points were 2.9±1.3,4.8±1.8,5.7±1.8,F(2,22)= 52.11,P＜0.001,partial Eta squared=0.83.After introducing the route map,their comprehensive learning score increased 1.0(95%CI:0.46-1.49)(P＜0.001)compared to scores after traditional training.Conclusions The route map may significantly improve learning effectiveness and confidence of beginners in the field of cervical spinal ultrasonography and can be used as a routine training tool in the teaching of cervical spinal ultrasonography.

Clinical application and perspectives of unilateral biportal endoscopic technique / 解放军医学杂志

Unilateral biportal endoscopic(UBE)technique is a minimally invasive spinal technique developed rapidly in recent years.Compared with traditional spinal endoscopy,the prominent feature of UBE is that it can open two channels on the same side of the spine,which can be used to provide visual field and insert operating instruments respectively,greatly expanding the operating space and reducing the difficulty of surgery.It has the advantages of less bleeding,little injury,quick recovery and mild pain,and has unique advantages in the treatment of lumbar spinal stenosis,lumbar disc herniation and other lumbar degenerative diseases.With the continuous in-depth exploration and development of the UBE technique,the field of diseases that can be treated by this technology has gradually expanded.It is not only limited to lumbar diseases,but also has made great progress in cervical and thoracic diseases,which has attracted the attention of many spinal surgeons.UBE technique has become one of the promising surgical methods for spinal-related diseases,but there are also complications such as incomplete decompression,nerve root and dural injury,epidural hematoma,relatively prolonged operation time,operation fatigue and other deficiencies.This paper summarizes the progress of the UBE technique,discusses its complications and deficiencies,proposes relevant solutions and possible future directions for its development,so as to provide reference for the clinical practice of UBE technique.

Construction of nursing quality standards in patients who underwent spine surgery based on three-dimensional quality model / 中国实用护理杂志

Objective:To explore and construct the nursing quality standards of spine surgery, provide a scientific basis for improving the nursing quality of spine surgery.Methods:Taking the "structure-process-outcome" three-dimensional quality model as the theoretical framework, through evidenced-based literature search and semi-structured interview, the items pool was formed, and finally the nursing quality standards were determined by two rounds of Delphi method of expert inquiry from May to July 2023.Results:The positive coefficients of the two rounds of inquiries to experts were 0.90 and 1.00, respectively. The authority coefficients were 0.946 and 0.951, respectively. The Kendall coefficients of the first, second and third level standards in the first round were 0.161, 0.095 and 0.108, respectively, and the Kendall coefficients of the first, second and third level standards in the second round were 0.162, 0.088 and 0.100, respectively, the differences were statistically significant (all P<0.05). The final nursing quality standards were finally constructed, including 3 first-level standards (structural quality, process quality and outcome quality), 20 second-level standards and 60 third-level standards.Conclusions:The nursing quality standards of spine surgery based on the three-dimensional quality model of "structure-process-outcome" have high reliability and science, which can provide target incentives for clinical nurses, provide a basis for the quality of specialized spine nursing, and promote the development of nursing specialization and the construction of nursing discipline.

Clinical efficacy of UBE-LIF versus posterior lesion removal bone graft fusion fixation in the treatment of lumbar brucelli spondylitis / 西安交通大学学报(医学版)

Objective To compare the safety and clinical efficacy of lesion removal combined with percutaneous pedicle screw fixation with classical posterior lesion removal in the treatment of lumbar brucelli spondylitis(LBS)by unilateral biportal endoscopic technique with transforaminal lumbar interbody fusion(UBE-LIF)technique.Methods The clinical data of 32 patients with LBS admitted by the Department of Spine and Orthopedics of Gansu Provincial Hospital of Traditional Chinese Medicine from January 2020 to January 2022 were retrospectively analyzed,and the clinical data of the 32 LBS patients were divided into 15 cases in the UBE-LIF group and 17 cases in the posterior group.The general data,surgery-related indexes,and postoperative pathological HE staining of the two groups were recorded and analyzed.The patients'clinical recovery was assessed according to their erythrocyte sedimentation rate(ESR)and C-reactive protein(CRP),low back pain visual analogue score(VAS),Japanese Orthopaedic Association(JOA)score,and Oswestry Dysfunction Index(ODI)preoperative,1 week after surgery,1,3,6 months and 1 year after surgery.Lumbar lordosis angle(LL)and intervertebral space height(DH)were measured by imaging before surgery and at the last follow-up,and intervertebral bone graft fusion was assessed using Suk grading criteria.Results Both groups successfully completed the operation and no serious postoperative complications occurred.There were no significant differences in gender,age,surgical segment,operation time,preoperative ESR and CRP,preoperative VAS,JOA score and ODI index,preoperative LL and DH(P＞0.05).The intraoperative blood loss,postoperative drainage,postoperative getting out of bed,and postoperative hospital stay in UBE-LIF group were significantly lower than those in the posterior group(P＜0.001).Pathological examination of diseased tissues was performed during surgery,all of which was consistent with brucellosis changes.Patients in both groups were followed up for 12-18 months,with an average of 14.8 months.The VAS,JOA score,and ODI index at all postoperative time points in the two groups were significantly improved compared with the preoperative period(P＜0.05).The difference between the two groups was significantly greater than that in the postoperative group:VAS score was lower in UBE-LIF group than in the posterior group(P＜0.01),CRP in both groups was higher than that in the preoperative group,and the elevation level was significantly lower in UBE-LIF group than in the posterior group(P＜0.001).There was no significant difference in ESR between the two groups compared with that before surgery(P＞0.05).There were no significant differences in VAS,JOA score,ODI index,CRP or ESR between the remaining time points after surgery(P＞0.05).At the last follow-up,imaging examination showed that the overall fusion rate of intervertebral bone graft in UBE-LIF group was 93.3％and 94.1％in the posterior group,without significant difference(x2=0.246,P=0.884).LL and DH were significantly improved in both groups compared with preoperative ones(P＜0.01),and the two groups did not significantly differ before and after surgery(P＞0.05).Conclusion Both surgical treatments for LBS are safe effect.Compared with posterior lesion removal bone graft fusion internal fixation,UBE-LIF technology combined with percutaneous pedicle screw internal fixation has the advantages of clear intraoperative vision,less blood loss,faster early postoperative recovery,and shorter postoperative hospital stay,and thus is a feasible surgical method for the minimally invasive treatment of LBS.

Biomechanical changes of the cervical spine in internal fixation with different anterior cervical interbody fusion systems / 中国组织工程研究

BACKGROUND:Due to the treatment of cervical spondylosis,the Zero-P system of the anterior cervical interbody fusion system will have problems such as screw loosening and fracture after operation,so a novel Low-P system has been developed. OBJECTIVE:To compare the effects of the novel Low-P and Zero-P anterior cervical intervertebral fusion systems on the biomechanical properties of adjacent segments of the cervical spine and to perform stress analysis on the internal fixation system,so as to provide a theoretical reference for clinical treatment. METHODS:A complete model of the C1-C7 segment of the cervical spine was established.Based on the effectiveness of the model,a finite element model of Low-P(type Z Low-P and type H Low-P)and Zero-P system implanted in C4-C5 segments was established.The stress distribution of implanted devices and adjacent vertebral nucleus pulposus,fibrous rings and end plates was analyzed under the conditions of forward flexion,posterior extension,lateral bending and rotation. RESULTS AND CONCLUSION:(1)After implantation of Low-P and Zero-P internal fixation devices,the range of motion of the type H Low-P system was large;the maximum stress value of type Z Low-P system was small;the maximum stress of Zero-P on the nucleus pulposus of adjacent segments was large;the maximum stress of end plate was small.(2)The influence of three internal fixation systems on adjacent segment fiber rings was close.(3)The screw stress of the Zero-P internal fixation system was much greater than that of the Low-P system.(4)It is indicated that compared with Zero-P type internal fixation system,the novel Low-P system reduces the stress value of steel plate and screw,which can reduce screw loosening and internal fixation system failure.The Low-P system has less stress on the nucleus pulposus of adjacent discs and reduces disc degeneration in adjacent segments.This paper provides a theoretical basis for the clinical study of a Low-P type internal fixation system.

Mechanical properties of L3/4 laminar decompression and intervertebral fusion in elderly osteoporosis patients analyzed by finite element method / 中国组织工程研究

BACKGROUND:The incidence of high lumbar disc herniation in elderly patients with osteoporosis is increasing.The changes in lumbar overall mechanical strength and biomechanical properties of adjacent vertebrae after conventional posterior approach decompression and interbody fusion have not been clarified.Finite element analysis has great value in the field of biomechanics because of its advantages of non-invasiveness,high repeatability and accuracy. OBJECTIVE:To explore the establishment of a finite element model of senile osteoporotic L3/4 lamina decompression using finite element analysis and intervertebral fusion spine,and to evaluate the biomechanical status of the internal fixation complex of bones under bending motion in elderly patients with osteoporosis. METHODS:Mimics 21.0 was used to extract the DICOM data of the spine CT to establish the 3D bony structure of the lumbar spine(T12-L5),which was imported into Geomagic wrap 2017.The L3/4 full lamina decompression model was established after redrawing the mesh,deleting the nails,cutting the model,filling the cavity,detecting and editing the contour line,constructing curved surfaces and grids,fitting curved surfaces and other operations.Solidworks 2017 was used to construct pedicle screws,connecting rods,and intervertebral fusion cages,which were assembled into the L3/4 full lamina decompression model.Intervertebral discs and articular process cartilage and other structures were established through operations such as stretching,isometric surfaces,moving and copying entities.ANSYS Workbench 17.0 was utilized for material assignment,simulating spinal ligaments,meshing,applying force and limiting boundary conditions.A complete osteoporotic L3/4 laminar decompression and intervertebral fusion spine finite element model was established.The stress,strain and displacement cloud diagram of the L3/4 lamina decompression and intervertebral fusion full lumbar spine finite element model were observed under simulated bending conditions. RESULTS AND CONCLUSION:(1)In terms of the stress cloud diagram:The T12-L1 vertebra had the highest average stress value;L2 dropped by 24%;L3 dropped by 55%,and L4-5 dropped by about 80%.The stress concentration in the L4/5 articular process area was the highest,followed by L2/3,and lighter in L1/2 and T12/L1.The stress concentration at the junction of the screw and the connecting rod was obvious,followed by the screw at the entrance and exit of the pedicle.(2)In terms of strain and displacement cloud map:The strain degree of L4/5 and L2/3 articular process was the highest;the strain degree of T12/L1 and L1/2 was the second,and the L3/4 segmental fusion cage,pedicle screw and connecting rod had no any visible deformation.The intervertebral discs of all segments showed great deformation.(3)It is concluded that the cooperative operation of multiple software can successfully construct a finite element model of the spine with L3/4 lamina decompression and intervertebral fusion in elderly patients with osteoporosis.Elderly patients after lumbar spine surgery can tolerate forward flexion,confirming that L3/4 laminar decompression and intervertebral fusion can maintain the shape of the spine and ensure the stability of the spine,but it is necessary to be alert to the occurrence of thoracolumbar stress fractures and adjacent spondylopathy.

Imaging landmarks of one-hole split endoscope in the treatment of upper lumbar intervertebral disc herniation under the guidance of three-dimensional reconstruction / 中国组织工程研究

BACKGROUND:One-hole split endoscope technique has been widely used in the treatment of lumbar degenerative diseases,but there is no relevant literature on the safety analysis of this technique in the treatment of upper lumbar disc herniation. OBJECTIVE:To observe the position relationship of nerve roots,intervertebral space and bone landmarks in the upper lumbar spine by three-dimensional lumbar CT reconstruction technology,and to provide a basis for the clinical operation of one-hole split endoscope surgery. METHODS:Twenty-six patients with upper lumbar disc herniation underwent a lumbar CT scan.Mimics 17.0 software was imported to measure the related imaging parameters of L1/2 to L3/4 segments:(1)Measurement of vertical distance:In coronal view,the distance(a)from the intersection point of the medial facet of the superior articular process and the superior endplate(N)to the apex of the articular process(S);in the coronal view,the distance(b)from the sagittal intersection(M)of N and the inferior endplate to the apex of the inferior articular process(X).(2)Measured horizontal distance:the distance(c)between the cross-section of N and the lower edge of the outlet nerve root(N2);distance(d)between the cross-section of N and the intersection point of neural tissue(N1);N1 to N2 distance(e);distance(f)between the cross-section of M and the lateral edge of the nerve tissue(M1);M to M cross-section and exit nerve root intersection(M2)distance(g);distance(h)from M1 to M2;distance(i)from M2 to N1;distance(j)from the posterior edge of the articular surface(R)to M2 in sagittal view of the superior articular process. RESULTS AND CONCLUSION:(1)With the decrease of the segment,the distances a and b gradually increased,and the distance j gradually decreased.There was no significant difference between L1/2 and L2/3 segments(P>0.05).(2)With the decrease of the segment,distance d first decreased and then increased;distance f gradually decreased;distances c,e,g,h and i gradually increased;and there was no significant difference between L2/3 and L3/4 segments(P>0.05).(3)Distance i was the shortest distance without pulling nerve roots in the natural state,and the area of the safety zone was between four points M1,M2,N1,and N2.The bone was removed to the upper and lower endplates by biting the bone downward and upward through S and X,respectively,to expose the intervertebral space,and the window of distance g to M2 could be opened outward to avoid injury of the outlet nerve roots.(4)In conclusion,the upper lumbar vertebrae have unique anatomical characteristics.Based on the relevant measurements of nerve roots,spinal dura and intervertebral space,the parameters of the one-hole split endoscope technique are more accurate and safe during operation.

Finite element analysis of lumbar vertebra biomechanics after transforaminal lumbar interbody fusion combined with bilateral transpedicular transdiscal lumbar screw fixation / 中国组织工程研究

BACKGROUND:Transpedicular transdiscal lumbar screw is a new type of spinal minimally invasive internal fixation technology.Compared with traditional bilateral pedicle screws,only one screw is needed to fix one segment on one side.It has the characteristics of being more economical,less trauma and easy to operate.However,studies on the application of transpedicular transdiscal lumbar screws combined with transforaminal lumbar interbody fusion(TLIF)and fixation are still rare. OBJECTIVE:To evaluate the effect of TLIF combined with various surgery methods on stress distribution of cage,fixation,disc lower and endplate and range of motion of lumbar vertebrae by constructing three kinds of finite element models including modified TLIF(cage alone)model,modified TLIF combined with bilateral pedicle screw(cage+BPS)model and modified TLIF combined with bilateral transpedicular transdiscal lumbar screw(cage+BTPTDS)model. METHODS:The CT images of the adult lumbar spine were used to establish the three kinds of TLIF finite element models:cage alone,cage+BPS and cage+BTPTDS using software Mimics,Geomagic and SolidWorks.ANSYS Workbench was used to simulate the application of six different motion loads of human body flexion and extension,left and right bending,and left and right rotation to calculate stress distribution and the changes in the range of motion of the lumbar spine of the cage,fixation,endplate and disc of the three lumbar spine surgery models and to compare the effects of three surgical options on the biomechanical effects of the lumbar spine. RESULTS AND CONCLUSION:(1)The cage alone model,cage+BPS model and cage+BTPTDS model were constructed successfully.(2)In flexion and lateral bending conditions,the maximum stress of the cage of cage+BTPTDS model was smaller than that of the cage alone model and a little greater than that of the cage+BPS model.In the extension condition,the maximum stress of the cage of the cage+BPS model was obviously smaller than that of the other two models.When it came to rotating condition,the maximum stress of the cage in the cage+BPS model and the cage+BTPTDS model presented no obvious difference,which was both smaller than the cage alone model.(3)The maximum stress of fixation of the cage+BTPTDS model was obviously bigger than the cage+BPS model in flexion and extension conditions,close to the cage+BPS model in lateral bending conditions,and smaller than the cage+BPS model in rotation conditions.(4)The maximum stress of the lower endplate of the fusion segment of the cage+BPS model was between the two other models.(5)In terms of the range of motion,the cage+BTPTDS model presented no obvious difference with that of the cage+BPS model at flexion and extension,left and right bending,and left and right rotation.(6)It is concluded that modified TLIF combined with transpedicular transdiscal lumbar screw provides stable support for the vertebral body of the fusion segment,ensures the motion range of the lumbar spine and has a good biomechanical effect.

Decompression and fusion for degenerative lumbar spondylolisthesis affect sagittal disequilibrium of the spine / 中国组织工程研究

BACKGROUND:Lumbar decompression and fusion is the most effective surgical method to treat lumbar degenerative spondylolisthesis.In recent years,the sagittal balance of the spine has been widely considered the key factor to adjust the outcome of spinal surgery,and factors that can affect the sagittal balance of the spine indirectly affect the surgical effect and prognosis. OBJECTIVE:To summarize the risk factors that can affect the sagittal balance of the spine during decompression and fusion due to lumbar spondylolisthesis,and play a certain reference role in the surgical treatment of lumbar spondylolisthesis. METHODS:With"lumbar spondylolisthesis,the sagittal plane balance of the spine,surgical treatment,risk factors"as the Chinese search terms,and"lumbar spondylolisthesis,sagittal balance,risk factor"as the English search terms,PubMed,Springer,ScienceDirect,Wanfang,VIP and CNKI were searched respectively.The focus of the search was from January 2010 to January 2023,and a few classic long-term articles were included.Preliminary screening was conducted by reading the title and abstract.After excluding repetitive research in Chinese and English literature,low-quality journals and irrelevant literature,67 articles were finally included for review. RESULTS AND CONCLUSION:(1)Degenerative lumbar spondylolisthesis is an important factor causing spinal canal stenosis and lumbar instability,and is the main cause of low back pain and intermittent claudication.Lumbar decompression,fusion and internal fixation is an effective way to treat degenerative lumbar spondylolisthesis.(2)In the past,the treatment of degenerative lumbar spondylolisthesis with decompression,fusion and fixation focused on thorough exploration and release of nerve roots,reduction of spondylolisthesis and solid internal fixation,but less attention was paid to the balance of sagittal plane of the spine.(3)With the popularization of lumbar decompression,fusion and internal fixation,complications caused by the sagittal imbalance of the spine gradually increased,resulting in poor prognosis of patients and even increased risk of secondary surgery.(4)Previous studies have only discussed the correlation between lumbar sagittal plane parameters and spinal sagittal plane balance,but have not in-depth studied the relevant factors causing spinal sagittal plane imbalance.(5)Our results show that open lumbar fixation and fusion,complete reduction of spondylolisthesis,selection of thicker pedicle screws,selection of larger fusion cages,and autologous bone transplantation are beneficial factors for maintaining sagittal balance.The higher the number of fusion segments,the higher the level of fusion segments is,which is a risk factor for sagittal plane imbalance.

Biomechanical response of postural kyphosis under the action of bending moments / 中国组织工程研究

BACKGROUND:Most of the biomechanical studies on kyphosis have focused on trunk muscle strength and sagittal plane balance,and little has been reported on the biomechanical response within the spine during kyphosis. OBJECTIVE:To investigate the biomechanical response of the spine during postural kyphosis by simulating the process of postural kyphosis. METHODS:A three-dimensional finite element model of the normal thoracolumbar segment(T1-S1 segment)was established by using the finite element method.10 groups of pure bending loads from 1.15-11.52 N·m were applied using a three-point force system on T1,T6,and T12 vertebrae to simulate the process of postural kyphosis in normal humans.The relationship between the loads and Cobb angle and the biomechanical responses of vertebrae,ribs,and intervertebral discs were analyzed. RESULTS AND CONCLUSION:(1)During postural kyphosis,the Cobb angle size of T1-T12 segments was linearly related to the load size.(2)The maximum stresses on the vertebrae,ribs,and intervertebral discs increased with increasing load.(3)Under the action of 11.52 N·m moment,the maximum stresses on the vertebral body,ribs,and intervertebral disc were found in the front of the T6 vertebral body,the rib head of the 10th pair of ribs,and the right posterior side of the intervertebral disc of the T5-T6 segments.(4)The results of this study suggest that postural kyphosis leads to increased stress on the vertebrae,ribs,and discs,with the most significant increase in stress on the anterior side of the T6 vertebrae,at the rib head of the 10th pair of ribs,and on the anterior side of the disc at the T5-T6 segment,as well as on the posterior side,which may increase the risk of injury to the vertebrae,ribs,and discs,which provides a biomechanical basis for the design of kyphosis orthoses.

Mechanical analysis of cortical bone trajectory screw placement in lumbar revision / 中国组织工程研究

BACKGROUND:At present,there are shortcomings and risks in the surgical revision of vertebral bodies that failed to be fixed in clinical practice.To avoid the risks of conventional revision surgery,the cortical bone trajectory technique is used to perform revision surgery on vertebral bodies that failed to be fixed.However,the mechanical properties of cortical bone trajectory technique screws in revision surgery are not clear. OBJECTIVE:The mechanical properties of cortical bone trajectory in lumbar revision surgery were analyzed by the finite element method to provide a theoretical basis for the clinical application of cortical bone trajectory in revision surgery. METHODS:CT scan data of the osteoporotic vertebral body were obtained and the L4 vertebral body model was established.The initial cortical bone trajectory placement and traditional pedicle screw in the L4 vertebral body model were completed,respectively,and their mechanical data were taken as the baseline standard for later evaluation of revision surgical performance.The traditional pedicle screw was removed and the screw path was retained.The cortical bone trajectory screw was used for secondary screw placement on the vertebral body to achieve lumbar refixation.The axial pull-out force,stability,and lumbar motion range of the revised screw were analyzed by the finite element method. RESULTS AND CONCLUSION:(1)The screw axial pull-out force of the cortical bone trajectory revision group was 25.6%higher than that of the traditional pedicle initial group.(2)In the lower,left,and right working conditions,the load-displacement ratio of screws in the cortical bone trajectory revision group increased by 18.5%,41.3%,and 35.0%,respectively,compared with the traditional pedicle initial group.The load-displacement ratio of screws in the cortical bone trajectory revision group was slightly higher than that in the traditional pedicle initial group under the above condition,but there was no statistically significant difference(P>0.05).(3)In anterior and posterior flexion conditions,lumbar motion range in the cortical bone trajectory revision group was increased by 45.5%and 36.1%compared with the traditional pedicle initial group,but there was no statistically significant difference in left bend,right bend,and axial rotation conditions(P>0.05).(4)There were no statistically significant differences in screw axial pull-out force,screw load-displacement ratio,and lumbar motion range between the cortical bone trajectory revision group and cortical bone trajectory initial group(P>0.05).(5)The mechanical data exhibited that although the revised nail track bone was damaged or lost to a certain extent,the mechanical properties of the cortical bone trajectory revision group were still better than those of the traditional pedicle initial group to a certain extent.Moreover,there was no significant difference in the mechanical properties between the cortical bone trajectory revision group and the cortical bone trajectory initial group.It provides a reference for revision surgery of lumbar internal fixation with cortical bone trajectory technique in patients with failed traditional pedicle fixation.

Meta-analysis of the incidence and related factors for cervical spine instability in patients with rheumatoid arthritis / 中国组织工程研究

OBJECTIVE:At present,there are many reports on the related factors associated with the incidence of cervical spine instability in patients with rheumatoid arthritis,but there are problems such as small sample size and many confounding factors,and the research results of various studies on the same related factors are also different.This article analyzed the factors related to cervical spine instability in patients with rheumatoid arthritis by means of a systematic review. METHODS:Articles related to cervical spine instability in patients with rheumatoid arthritis were collected by searching both Chinese and English databases until March 2023.The outcome of cervical spine instability in patients with rheumatoid arthritis was used as the grouping criterion to abstract basic information,baseline patient characteristics,laboratory-related tests,medication use,and other relevant risk factors.Meta-analysis was done using Stata 14.0 software. RESULTS:(1)Sixteen relevant studies,all of moderate or above quality,were included,including seven studies with case-control studies and nine with cross-sectional studies.The overall incidence of cervical spine instability in patients with rheumatoid arthritis was 43.08%.(2)Meta-analysis showed:Related risk factors included female(OR=0.60,95%CI:0.44-0.82,P=0.002);age at disease onset(SMD=-0.52,95%CI:-0.86 to-0.18,P=0.003);duration of disease(SMD=0.58,95%CI:0.14-1.02,P=0.01);body mass index(OR=0.74,95%CI:0.63-0.88,P=0.001);rheumatoid factors positive univariate analysis subgroup(OR=1.33,95%CI:1.02 to 1.72,P=0.04),C-reactive protein(SMD=0.26,95%CI:0.16-0.35,P=0.00),erythrocyte sedimentation rate(SMD=0.15,95%CI:0.002-0.29,P=0.047),anti-cyclic-citrullinated peptide antibodies(OR=1.73,95%CI:1.19-2.51,P=0.004),28-joint Disease Activity Score(SMD=0.20,95%CI:0.04-0.37,P=0.02),destruction of peripheral joints(OR=2.48,95%CI:1.60-3.85,P=0.00),and corticosteroids(OR=1.91,95%CI:1.54-2.37,P=0.00)were strongly associated with the development of rheumatoid arthritis-cervical spine instability.Female and corticosteroid use were independently associated with the occurrence of rheumatoid arthritis-cervical spine instability. CONCLUSION:Based on clinical evidence from 16 observational studies,the overall incidence of rheumatoid arthritis-cervical spine instability was 43.08%.However,the incidence of cervical spine instability in rheumatoid arthritis patients varied greatly among different studies.Gender(female)and the use of corticosteroids were confirmed as independent correlation factors for the onset of cervical spine instability in patients with rheumatoid arthritis.The results of this study still provide some guidance for early clinical recognition,diagnosis,and prevention of rheumatoid arthritis-cervical spine instability.