Bioceramic scaffolds with two-step internal/external modification of copper-containing polydopamine enhance antibacterial and alveolar bone regeneration capability / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Magnesium-doped calcium silicate (CS) bioceramic scaffolds have unique advantages in mandibular defect repair; however, they lack antibacterial properties to cope with the complex oral microbiome. Herein, for the first time, the CS scaffold was functionally modified with a novel copper-containing polydopamine (PDA(Cu2+‍)) rapid deposition method, to construct internally modified (*P), externally modified (@PDA), and dually modified (*P@PDA) scaffolds. The morphology, degradation behavior, and mechanical properties of the obtained scaffolds were evaluated in vitro. The results showed that the CS*P@PDA had a unique micro-/nano-structural surface and appreciable mechanical resistance. During the prolonged immersion stage, the release of copper ions from the CS*P@PDA scaffolds was rapid in the early stage and exhibited long-term sustained release. The in vitro evaluation revealed that the release behavior of copper ions ascribed an excellent antibacterial effect to the CS*P@PDA, while the scaffolds retained good cytocompatibility with improved osteogenesis and angiogenesis effects. Finally, the PDA(Cu2+)-modified scaffolds showed effective early bone regeneration in a critical-size rabbit mandibular defect model. Overall, it was indicated that considerable antibacterial property along with the enhancement of alveolar bone regeneration can be imparted to the scaffold by the two-step PDA(Cu2+) modification, and the convenience and wide applicability of this technique make it a promising strategy to avoid bacterial infections on implants.

Research status and prospect of tissue engineering technology in treatment of atrophic rhinitis / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress of the feasibility of a new treatment method for atrophic rhinitis (ATR) based on tissue engineering technology (seed cells, scaffold materials, and growth factors), and provide new ideas for the treatment of ATR.@*METHODS@#The literature related to ATR was extensively reviewed. Focusing on the three aspects of seed cells, scaffold materials, and growth factors, the recent research progress of ATR treatment was reviewed, and the future directions of tissue engineering technology to treat ATR were proposed.@*RESULTS@#The pathogenesis and etiology of ATR are still unclear, and the effectiveness of the current treatments are still unsatisfactory. The construction of a cell-scaffold complex with sustained and controlled release of exogenous cytokines is expected to reverse the pathological changes of ATR, promoting the regeneration of normal nasal mucosa and reconstructing the atrophic turbinate. In recent years, the research progress of exosomes, three-dimensional printing, and organoids will promote the development of tissue engineering technology for ATR.@*CONCLUSION@#Tissue engineering technology can provide a new treatment method for ATR.

A cervical cancer tissue-derived decellularized extracellular matrix scaffold for cervical cancer tissue reconstruction in vitro / 南方医科大学学报

OBJECTIVE@#The prepare decellularized extracellular matrix (ECM) scaffold materials derived from human cervical carcinoma tissues for 3D culture of cervical carcinoma cells.@*METHODS@#Fresh human cervical carcinoma tissues were treated with sodium lauryl ether sulfate (SLES) solution to prepare decellularized ECM scaffolds. The scaffolds were examined for ECM microstructure and residual contents of key ECM components (collagen, glycosaminoglycan, and elastin) and genetic materials by pathological staining and biochemical content analysis. In vitro 3D culture models were established by injecting cultured cervical cancer cells into the prepared ECM scaffolds. The cells in the recellularized scaffolds were compared with those in a conventional 2D culture system for cell behaviors including migration, proliferation and epithelial-mesenchymal transition (EMT) wsing HE staining, immunohistochemical staining and molecular biological technology analysis. Resistance to 5-fluorouracil (5-Fu) of the cells in the two culture systems was tested by analyzing the cell apoptosis rates via flow cytometry.@*RESULTS@#SLES treatment effectively removed cells and genetic materials from human cervical carcinoma tissues but well preserved the microenvironment structure and biological activity of ECM. Compared with the 2D culture system, the 3D culture models significantly promoted proliferation, migration, EMT and 5-Fu resistance of human cervical cancer cells.@*CONCLUSION@#The decellularized ECM scaffolds prepared using human cervical carcinoma tissues provide the basis for construction of in vitro 3D culture models for human cervical cancer cells.

Applicatoin of chitosan-based hydrogel in oral tissue engineering / 中南大学学报(医学版)

Pulpitis, periodontitis, jaw bone defect, and temporomandibular joint damage are common oral and maxillofacial diseases in clinic, but traditional treatments are unable to restore the structure and function of the injured tissues. Due to their good biocompatibility, biodegradability, antioxidant effect, anti-inflammatory activity, and broad-spectrum antimicrobial property, chitosan-based hydrogels have shown broad applicable prospects in the field of oral tissue engineering. Quaternization, carboxymethylation, and sulfonation are common chemical modification strategies to improve the physicochemical properties and biological functions of chitosan-based hydrogels, while the construction of hydrogel composite systems via carrying porous microspheres or nanoparticles can achieve local sequential delivery of diverse drugs or bioactive factors, laying a solid foundation for the well-organized regeneration of defective tissues. Chemical cross-linking is commonly employed to fabricate irreversible permanent chitosan gels, and physical cross-linking enables the formation of reversible gel networks. Representing suitable scaffold biomaterials, several chitosan-based hydrogels transplanted with stem cells, growth factors or exosomes have been used in an attempt to regenerate oral soft and hard tissues. Currently, remarkable advances have been made in promoting the regeneration of pulp-dentin complex, cementum-periodontium-alveolar bone complex, jaw bone, and cartilage. However, the clinical translation of chitosan-based hydrogels still encounters multiple challenges. In future, more in vivo clinical exploration under the conditions of oral complex microenvironments should be performed, and the combined application of chitosan-based hydrogels and a variety of bioactive factors, biomaterials, and state-of-the-art biotechnologies can be pursued in order to realize multifaceted complete regeneration of oral tissue.

Effect of pH on the chelation between strontium ions and decellularized small intestinal submucosal sponge scaffolds / 北京大学学报(医学版)

OBJECTIVE@#To investigate the preparation of decellularized small intestinal submucosa (dSIS) sponge scaffolds with chelated strontium (Sr) ions at different pH values, and to select the appropriate pH values for synthesizing Sr/dSIS scaffolds using the physicochemical properties and biocompatibility of the scaffolds as evaluation indexes.@*METHODS@#(1) Sr/dSIS scaffolds preparation and grouping: After mixing dSIS solution and strontium chloride solution in equal volumes, adjusting pH of the solution to 3, 5, 7, and 9 respectively, porous scaffolds were prepared by freeze-drying method after full reaction at 37℃, which were named Sr/dSIS-3, -5, -7, and -9 respectively, and the dSIS scaffolds were used as the control group. (2) Physicochemical property evaluation: The bulk morphology of the scaffolds was observed in each group, the microscopic morphology analyzed by scanning electron microscopy, and the porosity and pore size determined, the surface elements analyzed by energy spectroscopy, the structure of functional groups analyzed by infrared spectroscopy, the chelation rate determined by atomic spectrophotometry, the water absorption rate detected by using specific gravity method, and the compression strength evaluated by universal mechanical testing machine.(3) Biocompatibility evaluation: The cytotoxicity and proliferative effect to bone mesenchymal stem cells (BMSCs) of each group were evaluated by Calcein-AM/PI double staining method.@*RESULTS@#Scanning electron microscopy showed that the scaffolds of each group had an interconnected three-dimensional porous structure with no statistical difference in pore size and porosity. Energy spectrum analysis showed that strontium could be detected in Sr/dSIS-5, -7 and -9 groups, and strontium was uniformly distributed in the scaffolds. Functional group analysis further supported the formation of chelates in the Sr/dSIS-5, -7 and -9 groups. Chelation rate analysis showed that the Sr/dSIS-7 group had the highest strontium chelation rate, which was statistically different from the other groups (P < 0.05). The scaffolds in all the groups had good water absorption. The scaffolds in Sr/dSIS-5, -7 and -9 groups showed significantly improved mechanical properties compared with the control group (P < 0.05). The scaffolds in all the groups had good biocompatibility, and the Sr/dSIS-7 group showed the best proliferation of BMSCs.@*CONCLUSION@#When pH was 7, the Sr/dSIS scaffolds showed the highest strontium chelation rate and the best proliferation effect of BMSCs, which was the ideal pH value for the preparation of the Sr/dSIS scaffolds.

Research progress in influence of microstructure on performance of triply-periodic minimal surface bone scaffolds / 中国修复重建外科杂志

OBJECTIVE@#To summarize the influence of microstructure on performance of triply-periodic minimal surface (TPMS) bone scaffolds.@*METHODS@#The relevant literature on the microstructure of TPMS bone scaffolds both domestically and internationally in recent years was widely reviewed, and the research progress in the imfluence of microstructure on the performance of bone scaffolds was summarized.@*RESULTS@#The microstructure characteristics of TPMS bone scaffolds, such as pore shape, porosity, pore size, curvature, specific surface area, and tortuosity, exert a profound influence on bone scaffold performance. By finely adjusting the above parameters, it becomes feasible to substantially optimize the structural mechanical characteristics of the scaffold, thereby effectively preempting the occurrence of stress shielding phenomena. Concurrently, the manipulation of these parameters can also optimize the scaffold's biological performance, facilitating cell adhesion, proliferation, and growth, while facilitating the ingrowth and permeation of bone tissue. Ultimately, the ideal bone fusion results will obtain.@*CONCLUSION@#The microstructure significantly and substantially influences the performance of TPMS bone scaffolds. By deeply exploring the characteristics of these microstructure effects on the performance of bone scaffolds, the design of bone scaffolds can be further optimized to better match specific implantation regions.

Research progress on the design of bone scaffolds with different single cell structures / 中国修复重建外科杂志

OBJECTIVE@#To review the research progress of design of bone scaffolds with different single cell structures.@*METHODS@#The related literature on the study of bone scaffolds with different single cell structures at home and abroad in recent years was extensively reviewed, and the research progress was summarized.@*RESULTS@#The single cell structure of bone scaffold can be divided into regular cell structure, irregular cell structure, cell structure designed based on topology optimization theory, and cell structure designed based on triply periodic minimal surface. Different single cell structures have different structural morphology and geometric characteristics, and the selection of single cell structure directly determines the mechanical properties and biological properties of bone scaffold. It is very important to choose a reasonable cell structure for bone scaffold to replace the original bone tissue.@*CONCLUSION@#Bone scaffolds have been widely studied, but there are many kinds of bone scaffolds at present, and the optimization of single cell structure should be considered comprehensively, which is helpful to develop bone scaffolds with excellent performance and provide effective support for bone tissue.

Status of 3D Printing Technology for Preparing Bioceramic Materials / 中国医疗器械杂志

3D printing technology has great advantages in small batch and personalized customization, so it has attracted much attention in the biomedical field. The consumables available for 3D printing include polymer, metal, ceramic and derived materials. Biomedical ceramics, with high melting point and poor toughness, are the most difficult materials to be used in 3D printing. The progress of 3D printing ceramic preparation process using ceramic powder, ceramic slurry, ceramic wire, ceramic film and other different raw materials as consumables are reviewed, and the surface roughness, size, density and other parameters of ceramics prepared by SLS, 3DP, DIW, IJP, SL, DLP, FDM, LOM and other different processes are compared. The study also summarizes the clinical application status of 3D printed bioceramics in the field of hard tissue repair such as bone tissue engineering scaffolds and dental prostheses. The SL ceramic additive manufacturing technology based on the principle of UV polymerization has better manufacturing precision, forming quality and the ability to prepare large-size parts, and can also endow bioceramics with better biological properties, mechanical properties, antibacterial, tumor treatment and other functions by doping trace nutrients and surface functional modification. Compared with the traditional subtractive manufacturing process, the bioceramics prepared by 3D printing not only have good mechanical properties, but also often have better biocompatibility and osteoconductivity.

Research, development and application of collagen: a review / 生物工程学报

Collagen, which widely exists in skin, bone, muscle and other tissues, is a major structural protein in mammalian extracellular matrix. It participates in cell proliferation, differentiation, migration and signal transmission, plays an important role in tissue support and repair and exerts a protective effect. Collagen is widely used in tissue engineering, clinical medicine, food industry, packaging materials, cosmetics and medical beauty due to its good biological characteristics. This paper reviews the biological characteristics of collagen and its application in bioengineering research and development in recent years. Finally, we prospect the future application of collagen as a biomimetic material.

Research Advances in Medical Materials and Products for Soft Tissue Repairs / 中国医疗器械杂志

Soft tissue is an indispensable tissue in human body. It plays an important role in protecting the body from external physical, chemical or biological factors. Mild soft tissue injuries can self-heal, while severe soft tissue injuries may require related treatment. Natural polymers (such as chitosan, hyaluronic acid, and collagen) and synthetic polymers (such as polyethylene glycol and polylactic acid) exhibit good biocompatibility, biodegradability and low toxicity. It can be used for soft tissue repairs for antibacterial, hemostatic and wound healing purposes. Their related properties can be enhanced through modification or preparation of composite materials. Commonly used soft tissue repairs include wound dressings, biological patches, medical tissue adhesives, and tissue engineering scaffolds. This study introduces the properties, mechanisms of action and applications of various soft tissue repair medical materials, including chitosan, hyaluronic acid, collagen, polyethylene glycol and polylactic acid, and provides an outlook on the application prospects of soft tissue repair medical materials and products.

Application of silk fibroin coatings for biomaterial surface modification: a silk road for biomedicine / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Silk fibroin (SF) as a natural biopolymer has become a popular material for biomedical applications due to its minimal immunogenicity, tunable biodegradability, and high biocompatibility. Nowadays, various techniques have been developed for the applications of SF in bioengineering. Most of the literature reviews focus on the SF-based biomaterials and their different forms of applications such as films, hydrogels, and scaffolds. SF is also valuable as a coating on other substrate materials for biomedicine; however, there are few reviews related to SF-coated biomaterials. Thus, in this review, we focused on the surface modification of biomaterials using SF coatings, demonstrated their various preparation methods on substrate materials, and introduced the latest procedures. The diverse applications of SF coatings for biomedicine are discussed, including bone, ligament, skin, mucosa, and nerve regeneration, and dental implant surface modification. SF coating is conducive to inducing cell adhesion and migration, promoting hydroxyapatite (HA) deposition and matrix mineralization, and inhibiting the Notch signaling pathway, making it a promising strategy for bone regeneration. In addition, SF-coated composite scaffolds can be considered prospective candidates for ligament regeneration after injury. SF coating has been proven to enhance the mechanical properties of the substrate material, and render integral stability to the dressing material during the regeneration of skin and mucosa. Moreover, SF coating is a potential strategy to accelerate nerve regeneration due to its dielectric properties, mechanical flexibility, and angiogenesis promotion effect. In addition, SF coating is an effective and popular means for dental implant surface modification to promote osteogenesis around implants made of different materials. Thus, this review can be of great benefit for further improvements in SF-coated biomaterials, and will undoubtedly contribute to clinical transformation in the future.

4D bioprinting technology and its application in cardiovascular tissue engineering / 生物工程学报

3D bioprinting technology is a rapidly developing technique that employs bioinks containing biological materials and living cells to construct biomedical products. However, 3D-printed tissues are static, while human tissues are in real-time dynamic states that can change in morphology and performance. To improve the compatibility between in vitro and in vivo environments, an in vitro tissue engineering technique that simulates this dynamic process is required. The concept of 4D printing, which combines "3D printing + time" provides a new approach to achieving this complex technique. 4D printing involves applying one or more smart materials that respond to stimuli, enabling them to change their shape, performance, and function under the corresponding stimulus to meet various needs. This article focuses on the latest research progress and potential application areas of 4D printing technology in the cardiovascular system, providing a theoretical and practical reference for the development of this technology.

Application of gelatin microspheres in bone tissue engineering / 生物工程学报

Gelatin microspheres were discussed as a scaffold material for bone tissue engineering, with the advantages of its porosity, biodegradability, biocompatibility, and biosafety highlighted. This review discusses how bone regeneration is aided by the three fundamental components of bone tissue engineering-seed cells, bioactive substances, and scaffold materials-and how gelatin microspheres can be employed for in vitro seed cell cultivation to ensure efficient expansion. This review also points out that gelatin microspheres are advantageous as drug delivery systems because of their multifunctional nature, which slows drug release and improves overall effectiveness. Although gelatin microspheres are useful for bone tissue creation, the scaffolds that take into account their porous structure and mechanical characteristics might be difficult to be created. This review then discusses typical techniques for creating gelatin microspheres, their recent application in bone tissue engineering, as well as possible future research directions.

Application of decellularization-recellularization technique in plastic and reconstructive surgery / 中华医学杂志(英文版)

In the field of plastic and reconstructive surgery, the loss of organs or tissues caused by diseases or injuries has resulted in challenges, such as donor shortage and immunosuppression. In recent years, with the development of regenerative medicine, the decellularization-recellularization strategy seems to be a promising and attractive method to resolve these difficulties. The decellularized extracellular matrix contains no cells and genetic materials, while retaining the complex ultrastructure, and it can be used as a scaffold for cell seeding and subsequent transplantation, thereby promoting the regeneration of diseased or damaged tissues and organs. This review provided an overview of decellularization-recellularization technique, and mainly concentrated on the application of decellularization-recellularization technique in the field of plastic and reconstructive surgery, including the remodeling of skin, nose, ears, face, and limbs. Finally, we proposed the challenges in and the direction of future development of decellularization-recellularization technique in plastic surgery.

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT-Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Abstract Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37oC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

Resumo As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a análise. Não houve variações nas leituras entre as amostras estudadas, concluindo-se que a FT-Raman não atendeu às expectativas nas condições estudadas.

Automated Assessment of Cell Infiltration and Removal in Decellularized Scaffolds - Experimental Study in Rabbits / Avaliação automatizada da infiltração e remoção celular em scaffolds descelularizados - Estudo experimental em coelhos

Abstract Objective Semiquantitative and automated measurement of nuclear material removal and cell infiltration in decellularized tendon scaffolds (DTSs). Method 16 pure New Zealand rabbits were used, and the gastrocnemius muscle tendon was collected bilaterally from half of these animals (16 tendons collected); 4 were kept as control and 12 were submitted to the decellularization protocol (DTS). Eight of the DTSs were used as an in vivo implant in the experimental rotator cuff tear (RCT) model, and the rest, as well as the controls, were used in the semiquantitative and automated evaluation of nuclear material removal. The eight additional rabbits were used to make the experimental model of RCT and subsequent evaluation of cellular infiltration after 2 or 8 weeks, within the DTS. Results The semiquantitative and automated analysis used demonstrated a removal of 79% of nuclear material (p< 0.001 and power > 99%) and a decrease of 88% (p < 0.001 and power >99%) in the area occupied by nuclear material after the decellularization protocol. On cell infiltration in DTS, an increase of 256% (p < 0.001 and power >99%) in the number of cells within the DTS was observed in the comparison between 2 and 8 weeks postoperatively. Conclusion The proposed semiquantitative and automated measurement method was able to objectively measure the removal of nuclear material and cell infiltration in DTS.

Resumo Objetivo Mensuração semiquantitativa e automatizada da remoção de material nuclear e da infiltração celular em scaffolds tendinosos descelularizados (STDs). Método Foram utilizados 16 coelhos Nova Zelândia puros, sendo o tendão do músculo gastrocnêmio coletado bilateralmente de metade destes animais (16 tendões coletados); 4 foram mantidos como controle e 12 foram submetidos ao protocolo de descelularização (STD). Dos STDs, 8 foram utilizados como implante in vivo no modelo experimental de lesão do manguito rotador (LMR) e os restantes, assim como os controles, foram utilizados na avaliação semiquantitativa e automatizada da remoção de material nuclear. Os oito coelhos adicionais foram utilizados na confecção do modelo experimental de LMR e posterior avaliação da infiltração celular após 2 ou 8 semanas, dentro do STD. Resultados A análise semiquantitativa e automatizada utilizada demonstrou uma remoção de 79% do material nuclear (p< 0,001 e poder > 99%) e uma diminuição de 88% (p< 0,001 e poder > 99%) na área ocupada por material nuclear após o protocolo de descelularização. Sobre a infiltração celular no STD, foi observado um aumento de 256% (p< 0,001 e poder > 99%) no número de células dentro do STD na comparação entre 2 e 8 semanas de pós-operatório. Conclusão O método de mensuração semiquantitativo e automatizado proposto foi capaz de mensurar objetivamente a remoção de material nuclear e a infiltração celular no STD.

The effect of scaffold hydroxyapatite derived from portunus pelagicus shell on the expression of fibroblast growth factor-2 (fgf-2) and bone morphogenetic proteins-2 (bmp -2) in the extraction sockets of cavia cobaya / El efecto del scaffold de hidroxiapatita derivada de portunus pelagicus sobre la expresión del factor de crecimiento de fibroblastos-2 (FGF-2) y las proteínas morfogenéticas óseas-2 (BMP-2) en los alvéolos dentarios de cavia cobaya

Objetive: To determine the expression of Fibroblast Growth Factor (FGF)-2 and Bone Morphogenetic Protein (BMP)-2 after application of scaffold hydroxyapatite from Rajungan crab shell (Portunus pelagicus) in the tooth extraction socket of Cavia cobaya. Material and Methods: This study used a post-test only control group design with 28 Cavia cobaya separated into two groups, control and treatment group. The left mandibular incisor was extracted, and socket preservation was conducted. A hydroxyapatite graft derived from crab shells was mixed with gelatin and eventually turned into a scaffold, which was afterward put into the extraction socket. After 7 days and 14 days, each group was terminated and examined using immunohistochemical staining to observe the expression of FGF-2 and BMP-2. One-Way Anova and Tukey HSD were used to examine the research data. Results: FGF-2 and BMP-2 expressions were observed higher in the group that received hydroxyapatite scaffold at the post-extraction socket than those in the group that did not receive hydroxyapatite scaffold. Conclusion: The application of a hydroxyapatite scaffold from Rajungan crab shell (Portunus pelagicus) to the tooth extraction socket can increase FGF-2 and BMP-2 expression.

Objetivo: Determinar la expresión del factor de crecimiento de fibroblastos (FGF)-2 y la proteína morfogenética ósea (BMP)-2 después de la aplicación de hidroxiapatita de andamio de caparazón de cangrejo Rajungan (Portunus pelagicus) en el alvéolo de extracción dental de Cavia cobaya. Material y Métodos: Este estudio utilizó un diseño de grupo de control solo posterior a la prueba con 28 Cavia cobaya separados en dos grupos, grupo de control y grupo de tratamiento. Se extrajo el incisivo mandibular izquierdo y se realizó la preservación del alvéolo. Un injerto de hidroxiapatita derivado de caparazones de cangrejo se mezcló con gelatina y se convirtió en un andamio, que luego se colocó en el alvéolo de extracción. Después de 7 días y 14 días, se terminó cada grupo y se examinó mediante tinción inmunohistoquímica para observar la expresión de FGF-2 y BMP-2. Se utilizaron One-Way Anova y Tukey HSD para examinar los datos de la investigación. Resultados: Las expresiones de FGF-2 y BMP-2 se observaron más altas en el grupo que recibió la estructura de hidroxiapatita en el alvéolo posterior a la extracción que en el grupo que no recibió la estructura de hidroxiapatita. Conclusión: La aplicación de un andamio de hidroxiapatita de caparazón de cangrejo Rajungan (Portunus pelagicus) al alvéolo de extracción dental puede aumentar la expresión de FGF-2 y BMP-2.

Células madre en odontología: nuevas perspectivas / Stem cells in dentistry: new perspectives

En el campo de la odontología, prevalecen actualmente alternativas terapéuticas con una filosofía conservadora. Sin embargo, con el advenimiento de los tratamientos con células madre (CM), se amplían las posibilidades terapéuticas, que buscan la combinación y el equilibrio entre la intervención tradicional y las posibilidades de reposición de estructuras anatómicas dañadas, a través de la regeneración de tejidos utilizando células madre o sus derivados (AU)

In the dentistry field, therapeutic alternatives with a conservative philosophy currently prevail. However, with the advent of stem cell (SC) treatments, therapeutic possibilities are expanding, seeking a combination and balance between traditional intervention and the pos- sibility of replacing damaged anatomical structures through tissue regeneration, using stem cells or their derivatives (AU)

Decoloración coronaria inducida por la utilización de Biodentine y MTA blanco en procedimientos de regeneración pulpar: estudio ex vivo / Coronal discoloration induced by the use of Biodentine and white MTA in pulp regeneration procedures: an ex-vivo study

Se comparó el grado de decoloración de la corona clínica en piezas dentarias anteriores humanas ex-traídas, sometidas a procedimientos de regeneración endodóntica, utilizando MTA blanco o sustituto bioac-tivo de la dentina (Biodentine) como barrera cervical, en presencia de coágulo sanguíneo como andamio. En total se prepararon 24 piezas dentarias anterio-res superiores humanas que fueron divididas en dos grupos control (GC) y dos grupos experimentales (GE). Cada uno incluía 6 piezas dentarias. En los GE se colo-có sangre humana fresca en el interior del conducto, y se confeccionó una barrera de Biodentine (GE3) o MTA (GE4). En los GC se colocó una torunda de algo-dón estéril saturada con solución fisiológica estéril, y se confeccionó una barrera de Biodentine (GC1) o MTA (GC2). El color se evaluó de acuerdo con el espa-cio de color CIE L* a* b* utilizando imágenes fotográfi-cas digitales estandarizadas en dos puntos de tiempo: día 0 (T0) y día 35 (T35). La descripción de los datos in-cluyó mediana (Md), primer cuartil (Q1), tercer cuartil (Q3), media y desviación estándar (DE). Se emplea-ron las pruebas de los rangos con signo de Wilcoxon (RSW) y ANOVA de una vía; p < 0,05 fue considerado significativo. Cuando se comparó ∆E se observaron diferencias significativas entre GC1 y el resto de los materiales (p < 0,05). ∆E fue menor en GC1 (media ± DE; 2,1 ± 1,6) que en los grupos restantes que no pre-sentaron diferencias significativas entre sí. En base a estos resultados, la estabilización del coágulo san-guíneo, como así la limpieza de la cavidad previa a la colocación del Biodentine y el uso de barreras cervi-cales, es imprescindible para evitar la coloración de la corona clínica (AU)

Discoloration remains an unfavorable complication of otherwise successful regenerative endodontic procedure of immature teeth with necrotic pulp. Objective: Compare the degree of discoloration of extracted human teeth after regenerative endodontic procedures, using MTA or Biodentine as a cervical barrier with a blood clot as a scaffold. In total 24 human upper anterior teeth were prepared and divided into two control groups (CG) and two experimental groups (EG). In the EG, fresh human blood was placed inside the root and a Biodentine (GE3) or MTA (GE4) barrier was made in. A sterile cotton swab saturated with sterile physiological solution was placed in the GCs and a Biodentine (GC1) or MTA (GC2) barrier was made in. The color was evaluated according to the CIE L* a* b* color space using standardized digital photographic images at two time points: day 0 (T0) and day 35 (T35). The description of the data included median (Md), first quartile (Q1), third quartile (Q3), means, and standard deviation (SD). Wilcoxon signed rank tests (RSW) and one-way ANOVA were used. p < 0.05 was considered significant. When ∆E was compared, significant differences were observed between GC1 and the rest of the materials (p < 0.05). ∆E was lower in CG1 (mean ± SD; 2.1 ± 1.6) than in the remaining groups, which did not present significant differences between them. There was no significant difference between tooth discolorations with materials in the presence of blood. However, in the absence of blood, Biodentine exhibited less tooth discoloration than MTA (AU)

Decellularized extracellular matrix mediates tissue construction and regeneration / 医学前沿

Contributing to organ formation and tissue regeneration, extracellular matrix (ECM) constituents provide tissue with three-dimensional (3D) structural integrity and cellular-function regulation. Containing the crucial traits of the cellular microenvironment, ECM substitutes mediate cell-matrix interactions to prompt stem-cell proliferation and differentiation for 3D organoid construction in vitro or tissue regeneration in vivo. However, these ECMs are often applied generically and have yet to be extensively developed for specific cell types in 3D cultures. Cultured cells also produce rich ECM, particularly stromal cells. Cellular ECM improves 3D culture development in vitro and tissue remodeling during wound healing after implantation into the host as well. Gaining better insight into ECM derived from either tissue or cells that regulate 3D tissue reconstruction or organ regeneration helps us to select, produce, and implant the most suitable ECM and thus promote 3D organoid culture and tissue remodeling for in vivo regeneration. Overall, the decellularization methodologies and tissue/cell-derived ECM as scaffolds or cellular-growth supplements used in cell propagation and differentiation for 3D tissue culture in vitro are discussed. Moreover, current preclinical applications by which ECM components modulate the wound-healing process are reviewed.