Effect of stem cells combined with a polymer/ceramic membrane on osteoporotic bone repair

Abstract Cell therapy associated with guided bone regeneration (GBR) can be used to treat bone defects under challenging conditions such as osteoporosis. This study aimed to evaluate the effect of mesenchymal stem cells (MSCs) in combination with a poly(vinylidene-trifluoroethylene)/barium titanate (PVDF-TrFE/BT) membrane on bone repair in osteoporotic rats. Osteoporosis was induced in female rats by bilateral removal of the ovaries (OVX) or sham surgery (SHAM), and the osteoporotic condition was characterized after 5 months by microtomographic and morphometric analyses. Calvarial defects were created in osteoporotic rats that immediately received the PVDF-TrFE/BT membrane. After 2 weeks, bone marrow-derived MSCs from healthy rats, characterized by the expression of surface markers using flow cytometry, or phosphate-buffered saline (PBS) (Control) were injected into the defects and bone formation was evaluated 4 weeks post-injection by microtomographic, morphometric, and histological analyses. A reduction in the amount of bone tissue in the femurs of OVX compared with SHAM rats confirmed the osteoporotic condition of the experimental model. More bone formation was observed when the defects were injected with MSCs compared to that with PBS. The modification that we are proposing in this study for the classical GBR approach where cells are locally injected after a membrane implantation may be a promising therapeutic strategy to increase bone formation under osteoporotic condition.

Model resin composites incorporating ZnO-NP: activity against S. mutans and physicochemical properties characterization

Abstract Although resin composites are widely used in the clinical practice, the development of recurrent caries at composite-tooth interface still remains as one of the principal shortcomings to be overcome in this field. Objectives To evaluate the activity against S. mutans biofilm of model resin composites incorporating different concentrations of ZnO-nanoparticles (ZnO-NP) and characterize their physicochemical properties. Materials and Methods Different concentrations of ZnO-NP (wt.%): E1=0, E2=0.5, E3=1, E4=2, E5=5 and E6=10 were incorporated into a model resin composite consisting of Bis-GMA-TEGDMA and barium borosilicate particles. The activity against S. mutans biofilm was evaluated by metabolic activity and lactic acid production. The following physicochemical properties were characterized: degree of conversion (DC%), flexural strength (FS), elastic modulus (EM), hardness (KHN), water sorption (Wsp), water solubility (Wsl) and translucency (TP). Results E3, E4, E5 and E6 decreased the biofilm metabolic activity and E5 and E6 decreased the lactic acid production (p<0.05). E6 presented the lowest DC% (p<0.05). No significant difference in FS and EM was found for all resin composites (p>0.05). E5 and E6 presented the lowest values of KHN (p<0.05). E6 presented a higher Wsp than E1 (p<0.05) and the highest Wsl (p<0.05). The translucency significantly decreased as the ZnO- NP concentration increased (p<0.05). Conclusions The incorporation of 2 - 5 wt.% of ZnO-NP could endow antibacterial activity to resin composites, without jeopardizing their physicochemical properties.

Biocompatibility and osteogenesis of the castor bean polymer doped with silica (SiO2) or barium titanate (BaTiO3) nanoparticles

PURPOSE: To evaluate the biocompatibility and osteogenesis of castor oil polymer doped with SiO2 or BaTiO3 nanoparticles. METHODS: Twenty four male rats Wistar were submitted to bone defect filled with castor oil polymer. The animals were distributed in two experimental groups had been formed with 12 animals each: Group 1 - Castor oil polymer doped with 0.30 grams of SiO2 replacing 0.30 grams of CaCO3. Group 2 - Castor oil polymer doped with 0.30 grams of BaTiO3 replacing 0.30 grams of CaCO3. Euthanasia occurred 30 and 60 days after surgery and the femurs were sent to histological analysis and MEV. RESULTS: The implants were biocompatible and allowed for progressive osteogenesis through osteoconduction in both observation periods. There was significant bone neoformation at 30 and 60 days in both groups within the histomorphometric evaluation, but group 1's osteogenesis was lesser in the 30 and 60-day periods observed when compared to the animals of group 2. The MEV morphometric evaluation evidenced a lesser percentage of osseous tissue filling within the BaTiO2-doped polymer. CONCLUSION: The castor oil polymer doped with SiO2 or BaTiO3 remained biocompatible and allowed for progressive osteogenesis in both observation periods. .

Effects of inward rectifier potassium channel blockers on EPCs function / 中国应用生理学杂志

<p><b>OBJECTIVE</b>To investigate the effects of inward rectifier potassium channel blockers (BaCl2, CsCl) on the functions of endothelial progenitor cells (EPCs).</p><p><b>METHODS</b>Density gradient centrifugation-isolated rat hone marrow mononuclear cells were cultured in vitro. EPCs were harvested and seeded on six culture dish when cells grew to 3-5 passages. Before testing the EPCs were synchronized with M199, which contain 2% fetal calf serum. In the end, EPCs were treated with different intervention. The experiment mainly included two parts: (1) BaCl2 (100 micromol/L) and free BaC2 of Tyrodes solution; (2) CsCl (1 mmol/L) and control. Cell pretreated with blockers above mentioned for 12 h, then the gene expression of stromal cell-derived factor-1 (SDF-1), epoprotenol (PGI2) were assessed, beyond that the ability of adhesion, migration were assayed with different tests. In addition, the medium was collected when EPCs were treated for 3 days. The levels of SDF-1 were measured by sandwich enzyme-linked immunosorbent assay (ELISA). Going even further, EPCs were treated with the signal pathway blockers in advance, after repeat the above steps, in order to analyze the change of SDF-1 and then discuss its mechanism.</p><p><b>RESULTS</b>Compared with control group, BaCl2, CsCl could increase EPC adhesion and migration to same extent. Moreover, the gene expression of SDF-1, PGI2 was significantly up-regulated and the production of SDF-1 increased evidently. Furthermore, the mechanism of SDF-1 secretion increasing mainly was associated with eNOS signaling pathways.</p><p><b>CONCLUSION</b>Ba2+ and Cs+ play important roles in increasing EPCs functions, such as adhesion, migration and secretion.</p>

Evaluation of antibacterial properties of Barium Zirconate Titanate (BZT) nanoparticle

So far, the antibacterial activity of some organic and inorganic compounds has been studied. Barium zirconate titanate [Ba(Zr xTi1-x)O3] (x = 0.05) nanoparticle is an example of inorganic materials. In vitro studies have provided evidence for the antibacterial activity of this nanoparticle. In the current study, the nano-powder was synthesized by sol-gel method. X-ray diffraction showed that the powder was single-phase and had a perovskite structure at the calcination temperature of 1000 ºC. Antibacterial activity of the desired nanoparticle was assessed on two gram-positive (Staphylococcus aureus PTCC1431 and Micrococcus luteus PTCC1625) and two gram-negative (Escherichia coli HP101BA 7601c and clinically isolated Klebsiella pneumoniae) bacteria according to Radial Diffusion Assay (RDA). The results showed that the antibacterial activity of BZT nano-powder on both gram-positive and gram-negative bacteria was acceptable. The minimum inhibitory concentration of this nano-powder was determined. The results showed that MIC values for E. coli, K. pneumoniae, M. luteus and S. aureus were about 2.3 µg/mL, 7.3 µg/mL, 3 µg/mL and 12 µg/mL, respectively. Minimum bactericidal concentration (MBC) was also evaluated and showed that the growth of E. coli, K. pneumoniae, M. luteus and S. aureus could be decreased at 2.3, 14, 3 and 18 µg/mL of BZT. Average log reduction in viable bacteria count in time-kill assay ranged between 6 Log10 cfu/mL to zero after 24 h of incubation with BZT nanoparticle.

Preparation and properties evaluation of methacrylic alginate gell beads cross-linked by mixed metal-cation / 生物医学工程学杂志

The aim of this study was to obtain the alginate gels which could have proper compressive strength and excellent permeability for cell proliferation and could have more promising potentials in the application of tissue engineering. Through the reaction of the carboxyl of the alginate and the amino of methacrylic acid, methylacrylic was generated into alginate long chain which could be enhanced by the polymerization of double bond under thermal reaction condition. And then alginate gel beads were prepared using the mixture of calcium chloride and barium chloride solution as cationic crosslinker, and the compressive modulus and permeability of the prepared alginate gel beads were investigated. When the ratio of barium ions to calcium ions was 5:5, the compression modulus was 189.7 kPa, and it showed the best permeability for trypsin with molecular weight of 24 kDa and entrapment effect for bovine serum albumin with molecular weight of 67 kDa. Compared to compositions of other ratios, the alginate gel beads made in 5:5 mixture indicated excellent compressive modulus and permeability. These results indicated that the alginate hydrogel beads with the ratio of barium ions to calcium ions being 5:5 have a potential application in tissue engineering as a support material and encapsulating materials in cell culture.

Barium Stimulates the Expression of Osteogenic Genes in Human Mesenchymal Stem Cells into Osteoblasts in vitro / 대한폐경학회지

OBJECTIVES: The purpose of this study was to determine the effect of barium on gene expression in differentiation of human mesenchymal stem cells into osteoblasts in vitro. METHODS: Human bone marrow stem cells were cultured for 0~14 days in osteogenic differentiation medium with strontium chloride (SrCl2) and barium chloride (BaCl2). Alkaline phosphatase (ALP) activity staining was the method selected for measuring osteoblast differentiation. Total ribonucleic acid (RNA) was extracted after 1, 3, 7, and 14 days, and analysis of runt-related transcription factor 2/core-binding factor alpha 1 (Runx2/Cbfa1), bone morphogenetic protein-2 (BMP-2), and bone sialoprotein (BSP) gene expression was performed by real-time reverse transcriptase (RT)-polymerase chain reaction (PCR). RESULTS: Barium and strontium had a superior enhancing effect on cell proliferation when compared to cells cultured in media without strontium or barium. BaCl2 produced a 2-fold increase in the expression of Runx2/Cbfa1 at 14 days. SrCl2 (0.1~0.3 mM) produced a 2-fold increase in the expression of Runx2/Cbfa1 at 14 days. Barium produced a 1.5-fold increase in the expression of BMP-2 on days 1 or 3. Expression of BSP was increased 1.5~1.7- and 2-fold on days 1 and 14 by barium and strontium, respectively. CONCLUSION: Barium-like strontium is considered one of the important factors in inducing mesenchymal stem cells to differentiate into osteoblasts with further enhancement on bone formation.

Effect of filler particles on surface roughness of experimental composite series

OBJECTIVE: The purpose of this study was to evaluate the effect of different filler sizes and shapes on the surface roughness of experimental resin-composite series. MATERIAL AND METHODS: Thirty-three disc-shaped specimens of the series (Spherical-RZD 102, 105, 106, 107, 114 and Irregular-RZD 103, 108, 109, 110, 111, 112) were prepared in a split Teflon mold and irradiated with an halogen light-curing unit (450 mW/cm² for 40 s) at both top and bottom surfaces. The specimens were stored for 3 months in distilled water. The surface roughness values in form of surface finish-vertical parameter (Ra), maximum roughness depth (Rmax) and horizontal roughness parameter (Sm) were recorded using a contact profilometer. The data were analyzed by one-way ANOVA and the means were compared by Scheffé post-hoc test (a=0.05). RESULTS: The lowest surface roughness (Ra) was observed in S-100 (0.079±0.013), while the roughest surface was noted in I-450/700/1000 (0.125±0.011) and I-450/1000 (0.124±0.004). The spherical-shape series showed the smoothest surface finish compared to the irregular-shape ones with higher significant difference (p>0.05). The vertical surface roughness parameter (Ra) values increased as the filler size increased yielding a linear relation (r²=0.82). On the contrary, the horizontal parameter (Sm) was not significantly affected by the filler size (r²=0.24) as well as the filler shape. CONCLUSIONS: Filler particle's size and shape have a great effect on the surface roughness parameters of these composite series.

The Inhibitory Effects of Hydrogen Sulfide on Pacemaker Activity of Interstitial Cells of Cajal from Mouse Small Intestine

In this study, we studied whether hydrogen sulfide (H2S) has an effect on the pacemaker activity of interstitial cells of Cajal (ICC), in the small intestine of mice. The actions of H2S on pacemaker activity were investigated using whole-cell patch-clamp technique, intracellular Ca2+ analysis at 30degrees C and RT-PCR in cultured mouse intestinal ICC. Exogenously applied sodium hydrogen sulfide (NaHS), a donor of hydrogen sulfide, caused a slight tonic inward current on pacemaker activity in ICC at low concentrations (50 and 100 micrometer), but at high concentration (500 micrometer and 1 mM) it seemed to cause light tonic inward currents and then inhibited pacemaker amplitude and pacemaker frequency, and also an increase in the resting currents in the outward direction. Glibenclamide or other potassium channel blockers (TEA, BaCl2, apamin or 4-aminopydirine) did not have an effect on NaHS-induced action in ICC. The exogenous application of carbonilcyanide p-triflouromethoxyphenylhydrazone (FCCP) and thapsigargin also inhibited the pacemaker activity of ICC as NaHS. Also, we found NaHS inhibited the spontaneous intracellular Ca2+ ([Ca2+]i) oscillations in cultured ICC. In doing an RT-PCR experiment, we found that ICC enriched population lacked mRNA for both CSE and CBS, but was prominently detected in unsorted muscle. In conclusion, H2S inhibited the pacemaker activity of ICC by modulating intracellular Ca2+. These results can serve as evidence of the physiological action of H2S as acting on the ICC in gastrointestinal (GI) motility.

Morphological analysis of glass, carbon and glass/carbon fiber posts and bonding to self or dual-cured resin luting agents

OBJECTIVE: The aim of this study was to evaluate the morphology of glass (GF), carbon (CF) and glass/carbon (G/CF) fiber posts and their bond strength to self or dual-cured resin luting agents. MATERIAL AND METHODS: Morphological analysis of each post type was conducted under scanning electron microscopy (SEM). Bond strength was evaluated by microtensile test after bisecting the posts and re-bonding the two halves with the luting agents. Data were subjected to two-way ANOVA and Tukey's test (α=0.05). Failure modes were evaluated under optical microscopy and SEM. RESULTS: GF presented wider fibers and higher amount of matrix than CF, and G/CF presented carbon fibers surrounded by glass fibers, and both involved by matrix. For CF and GF, the dual-cured material presented significantly higher (p<0.05) bond strength than the self-cured agent. For the dual agent, CF presented similar bond strength to GF (p>0.05), but higher than that of G/CF (p<0.05). For the self-cured agent, no significant differences (p>0.05) were detected, irrespective of the post type. For GF and G/CF, all failures were considered mixed, while a predominance of adhesive failures was detected for CF. CONCLUSION: The bonding between fiber posts and luting agents was affected by the type of fibers and polymerization mode of the cement. When no surface treatment of the post is performed, the bonding between glass fiber post and dual-cured agent seems to be more reliable.

Microleakage of the experimental composite resin with three component photoinitiator systems / 대한치과보존학회지

This study was done to determine if there is any difference in microleakage between experimental composite resins, in which various proportions of three component photoinitiators (Camphoroquinone, OPPI, Amine) were included. Four kinds of experimental composite resin were made by mixing 3.2% silanated barium glass (78 wt.%, average size; 1 microm) with each monomer system including variously proportioned photoinitiator systems used for photoinitiating BisGMA/BisEMA/TEGDMA monomer blend (37.5:37.5:25 wt.%). The weight percentage of each component were as follows (in sequence Camphoroquinone, OPPI, Amine): Group A - 0.5%, 0%, 1% / Group B - 2%, 0.2%, 2% / Group C - 0.2%, 1%, 0.2% / Group D - 1%, 1%, 2%. Each composite resin was used as a filling material for round class V cavities (diameter: 2/3 of mesiodistal width; depth: 1.5 mm) made on extracted human premolars and they were polymerized using curing light unit (XL 2500, 3M ESPE) for 40 s with an intensity of 600 mW/cm2. Teeth were thermocycled five-hundred times between 50degrees C and 550degrees C for 30s at each temperature. Electrical conductivity (microA) was recorded two times (just after thermocycling and after three-month storage in saline solution) by electrochemical method. Microleakage scores of each group according to evaluation time were as follows [Group: at first record / at second record; unit (microA)]: A: 3.80 (0.69) / 13.22 (4.48), B: 3.42 (1.33) / 18.84 (5.53), C: 4.18 (2.55) / 28.08 (7.75), D: 4.12 (1.86) / 7.41 (3.41). Just after thermocycling, there was no difference in microleakage between groups, however, group C showed the largest score after three-month storage. Although there seems to be no difference in microleakage between groups just after thermocycling, composite resin with highly concentrated initiation system or classical design (Camphoroquinone and Amine system) would be more desirable for minimizing microleakage after three-month storage.

Effect of fiber direction on the polymerization shrinkage of fiber-reinforced composites / 대한치과보존학회지

The aim of this study was to evaluate the effect of fiber direction on the polymerization shrinkage of fiber-reinforced composite. The disc-shaped flowable composite specimens (d = 10 mm, h = 2 mm, Aeliteflo A2, Bisco, Inc., IL, USA) with or without glass fiber bundle (X-80821P Glass Fiber, Bisco, Inc., IL, USA) inside were prepared, and the longitudinal and transversal polymerization shrinkage of the specimens on radial plane were measured with strain gages (Linear S-series 350omega, CAS, Seoul, Korea). In order to measure the free polymerization shrinkage of the flowable composite itself, the disc-shaped specimens (d = 7 mm, h = 1 mm) without fiber were prepared, and the axial shrinkage was measured with an LVDT (linear variable differential transformer) displacement sensor. The cross-section of the polymerized specimens was observed with a scanning electron microscope to examine the arrangement of the fiber bundle in composite. The mean polymerization shrinkage value of each specimen group was analyzed with ANOVA and Scheffe post-hoc test (alpha=0.05). The radial polymerization shrinkage of fiber-reinforced composite was decreased in the longitudinal direction of fiber, but increased in the transversal direction of fiber (p<0.05). We can conclude that the polymerization shrinkage of fiber-reinforced composite splint or restoratives is dependent on the direction of fiber.

Biocompatibility of polyurethane-BaFe(12)O(19 ) composite microsphere as a new endovascular embolization material / 南方医科大学学报

<p><b>OBJECTIVE</b>To investigate the biocompatibility of polyurethane-BaFe(12)O(19) magnetic composite microsphere as a new endovascular embolization material.</p><p><b>METHODS</b>The biocompatibility of BaFe(12)O(19) particle was evaluated in vitro using Ames test, cell toxicity test, acute and subacute systemic toxicity test, hemolysis test, bleeding time and clotting time test and blood clotting function assay.</p><p><b>RESULTS</b>Ames test showed that the MR values of this particle leaching solution were all less than 2 without mutagenicity. Cell toxicity test showed that leaching solution at different concentrations had grade I toxicity on L929 cells. Acute and subacute systemic toxicity test showed that the experimental animals had good general condition without obvious pathological abnormality. The hemolysis rate of experimental group was 2.43%, which met the ISO standard (no more than 5%). The bleeding time and clotting time in mice were comparable between the experimental group and control group (P>0.05). There were no significant differences in blood clotting function between experimental group and control group (P>0.05).</p><p><b>CONCLUSION</b>The material has no obvious toxicity or mutagenicity, and does not cause hemolysis or hemopexis or affect the bleeding time and clotting time. Polyurethane-BaFe(12)O( 19) particle possesses satisfactory biocompatibility.</p>

Research of changes in the mechanical properties and curability of composite core materials modified with ultrafine diamond / 华西口腔医学杂志

<p><b>OBJECTIVE</b>As a new kind of reinforcing filler, ultrafine diamond (UFD) is added into photocurable composite core materials. The properties of the materials are then measured to see if there is any improvement.</p><p><b>METHODS</b>Different content of barium glass and UFD were added into resin matrix to fabricate six groups of photocurable composite core materials. For each group of the materials, the flexural strength, Vicker's micro-hardness and depth of cure were measured. Data of the flexural strength and Vicker's micro-hardness was then collected and analyzed by One-Way ANOVA.</p><p><b>RESULTS</b>For the two kinds of composites with barium glass of 60% and 70%, only a small quantity of modified UFD with 0.2% weight percentage could improve the flexural strength of the composites by 34% and 21% respectively, the microhardness was improved by 23% and 30% respectively. The depth of cure of the composite core materials were more than 2 mm, which had reached the demand of the corresponding ISO criteria. The addition of UFD could make the composite core materials darker and grayer.</p><p><b>CONCLUSION</b>Micro-quantity of UFD can improve the mechanical properties of composite resins notably, and it will not affect the curability of the materials, but the defect in the color need to be reformed.</p>

Roles of potassium channel in effects of resveratrol on isolated myocardial contractility and heart rate research in guinea pig / 中国中药杂志

<p><b>OBJECTIVE</b>To study the effects of resvaratrol derivatives on spontaneous HR and CF of isolated guinea pig atrium.</p><p><b>METHOD</b>The dose-effect curve of resvaratrol was observed. The possible mechanism of potassium channels responsible for changes of CF and HR after administering with resvaratrol was measured.</p><p><b>RESULT</b>Resvaratrol reduced the spontaneous HR and weakened the CF in a dose-dependent manner ranging from 10(-6) to 3 x 10(-4) mol x L(-1) (P < 0.05). As compared with Res group, the effects were partly blocked by Gli (P < 0.05) and TEA (P < 0.01), but not blocked by 4-AP, BaCl2, Atropine.</p><p><b>CONCLUSION</b>Resvaratrol can induce negative chronotropic action and negative (inotropic action. The mechanism(s) may relate to the opening of K(ATP) and Kc(Ca).</p>

Inhibition of human macrophage-derived foam cell differentiation by blocking Kv1.3 and Kir2.1 channels / 中南大学学报(医学版)

OBJECTIVE@#To investigate the expression of Kv1.3 and Kir2.1 during human monocyte-derived macrophages differentiation into foam cells and their function in foam cells formation.@*METHODS@#The human macrophage-derived foam cells were obtained by incubating macrophages with ox-LDL (30 mg/L) for 60 h. The expression of Kv1.3 and Kir2.1 channels were examined by immunocytochemistry, RT-PCR and Western blot. Effects of channel blockers (rMargatoxin and BaCl2) on the cellular cholesterol metabolism were studied by measuring the cellular contents of total cholesterol (TC), free cholesterol (FC), and cholesterol ester (CE) in the presence or absence of the channel blockers.@*RESULTS@#After incubating macrophages with 30 mg/L ox-LDL for 60 h, the cellular contents of TC, FC and CE were markedly increased and the ratio of CE/TC was raised from (14.4+/-6.8)% to (57.9+/-3.5)% (P0.05); After being blocked specifically (rMargatoxin: 0.1, 10 nmol/L; BaC(12): 75, 125 micromol/L), the cellular contents of TC and CE were markedly reduced without exception and the ratios of CE/TC were all less than 50% (P<0.05).@*CONCLUSION@#Both Kv1.3 and Kir2.1 channels play a critical role in differentiation of macrophages into foam cells and blockage of corresponding potassium channels would prevent the formation of the foam cells.

Delayed hypersensitivity reaction after intravenous glucagon administered for a barium enema: a case report

<p><b>INTRODUCTION</b>Few reports have documented allergic hypersensitivity reactions after barium gastrointestinal studies. Of these, the barium suspension, its additives or intravenous glucagon given for bowel relaxation has been implicated as possible allergens. We report a patient with delayed hypersensitivity reaction after barium enema and discuss the reasons supporting glucagon as the possible allergen.</p><p><b>CLINICAL PICTURE</b>A 74-year-old Chinese woman presented with pruritic rashes, 1 day after a barium enema. Intravenous glucagon (GlucaGen, Novo Nordisk, Denmark) was administered during the barium enema. Physical examination revealed palpable purpuric rashes on the legs with erythematous papules and plaques on the arms and trunk. Skin biopsy demonstrated superficial perivascular infiltrates of lymphocytes and eosinophils, consistent with a drug eruption.</p><p><b>TREATMENT AND OUTCOME</b>The rashes resolved with antihistamines and topical corticosteroids.</p><p><b>CONCLUSION</b>This report highlights the potential of glucagon to cause hypersensitivity reactions. Awareness of this entity is important for the prevention and recognition of complications during barium gastrointestinal studies.</p>

Quantitative monomolecular coverage of barium glass by the silane coupling agent gamma-methacryloxypropyltrimethoxysilane / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To study the monomolecular coverage of the silane coupling agent gamma-methacryloxypropyltrimethoxysilane (gamma-MPS) on the barium glass filler surface.</p><p><b>METHODS</b>Kubelka-Munk (K-M) function values of the isolated OH-groups on the barium glass filler surface, which were based on the change of gamma-MPS concentrations, were measured using the quantitative analysis of the diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy. When all of the isolated OH-groups on the filler surface disappeared (where the K-M function values was zero), the monomolecular coverage of the gamma-MPS molecules on the filler surface was indicated by the linear regression analysis.</p><p><b>RESULTS</b>The relationship tallied with negative linear correlation between the K-M function values of the isolated OH-groups on the barium glass surface and the concentrations of gamma-MPS. Each gamma-MPS molecule occupied 0.21 nm(2) when the monomolecular coverage was formed on the barium glass surface.</p><p><b>CONCLUSIONS</b>The result of this study indicated the optimal amount of silane coupling agent on silanated barium glass filler during the production of resin composite.</p>

Sodium nitroprusside relaxes goat coronary artery through activation of calcium-dependent K+ channels.

In the present investigation we have examined the hypothesis that calcium-dependent K+ channels (K(Ca)) are involved in the sodium nitroprusside (SNP)-induced vasodilatation of goat coronary artery. SNP (10(-9)-3 x 10(-6) M), added cumulatively, relaxed K+ (30 mM)-contracted coronary artery ring segments in a concentration-dependent manner with an EC50 of 1.32 x 10(-7) M (95% CL, 0.93-1.86 x 10(-7) M; n = 21). K(Ca) blocker, tetraethyl ammonium (1 mM) caused a rightward shift in the concentration-response curve of SNP with a corresponding increase in EC50 (1.62 x 10(-6) M; 95% CL, 0.44-6.02 x 10(-6) M, n = 4) of nitro vasodilator. Lowering of extra cellular Ca2+ in the physiological saline solution to 1/4 of normal selectively attenuated the vasorelaxant response of SNP, thereby causing an increase in its EC50 (2.4 x 10(-6) M; 95% CL, 1.23-4.68 x 10(-6) M, n = 4). Exposure of the tissues to high K+ (80 mM) solution, a protocol adopted to reduce the K+ gradient across the cell membrane, markedly inhibited the coronary artery relaxations induced by SNP (EC50, 2.54 x 10(-6) M; 95% CL, 1.31-4.91 x 10(-6) M, n = 4), when compared with tissues contracted with low K+ (30 mM) solution (EC50 7.9 x 10(-8); 95% CL, 4.4 x 10(-8)-1.44 x 10(-7) M, n = 6). The results suggested that a major component of SNP-induced relaxation of goat coronary artery was mediated by K(Ca) channels.

Pantallas fluoroscópicas: rayos X, una asociación perdurable / Fluoroscopic screens: X-rays, a lasting association

A un dispositivo tan sencillo, como es una pantalla recubierta de platino-cianuro de bario, le cupo el honor de ser el instrumento con el cual se puso en evidencia un nuevo tipo de rayos, con una cualidad única y a la vez insospechada -ser capaces de atravesar cuerpos opacos a la luz- no importando que los mismos fuesen seres vivos