Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37ºC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a [...].

Culture of rat mesenchymal stem cells on PHBV-PCL scaffolds: analysis of conditioned culture medium by FT-Raman spectroscopy / Cultivo de células-tronco mesenquimais de rato sobre arcabouços de PHBV-PCL: análise do meio de cultura condicionado por espectroscopia de FT-Raman

Abstract Mesenchymal stem cells (MSCs) have great potential for application in cell therapy and tissue engineering procedures because of their plasticity and capacity to differentiate into different cell types. Given the widespread use of MSCs, it is necessary to better understand some properties related to osteogenic differentiation, particularly those linked to biomaterials used in tissue engineering. The aim of this study was to develop an analysis method using FT-Raman spectroscopy for the identification and quantification of biochemical components present in conditioned culture media derived from MSCs with or without induction of osteogenic differentiation. All experiments were performed between passages 3 and 5. For this analysis, MSCs were cultured on scaffolds composed of bioresorbable poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) and poly(ε-caprolactone) (PCL) polymers. MSCs (GIBCO®) were inoculated onto the pure polymers and 75:25 PHBV/PCL blend (dense and porous samples). The plate itself was used as control. The cells were maintained in DMEM (with low glucose) containing GlutaMAX® and 10% FBS at 37oC with 5% CO2 for 21 days. The conditioned culture media were collected and analyzed to probe for functional groups, as well as possible molecular variations associated with cell differentiation and metabolism. The method permitted to identify functional groups of specific molecules in the conditioned medium such as cholesterol, phosphatidylinositol, triglycerides, beta-subunit polypeptides, amide regions and hydrogen bonds of proteins, in addition to DNA expression. In the present study, FT-Raman spectroscopy exhibited limited resolution since different molecules can express similar or even the same stretching vibrations, a fact that makes analysis difficult. There were no variations in the readings between the samples studied. In conclusion, FT-Raman spectroscopy did not meet expectations under the conditions studied.

Resumo As células-tronco mesenquimais (MSCs) possuem grande potencial para aplicação em procedimentos terapêuticos ligados a terapia celular e engenharia de tecidos, considerando-se a plasticidade e capacidade de formação em diferentes tipos celulares por elas. Dada a abrangência no emprego das MSCs, há necessidade de se compreender melhor algumas propriedades relacionadas à diferenciação osteogênica, particularmente liga à biomateriais usados em engenharia de tecidos. Este projeto objetiva o desenvolvimento de uma metodologia de análise empregando-se a FT-Raman para identificação e quantificação de componentes bioquímicos presentes em meios de cultura condicionados por MSCs, com ou sem indução à diferenciação osteogênica. Todos os experimentos foram realizados entre as passagens 3 e 5. Para essas análises, as MSCs foram cultivadas sobre arcabouços de polímeros biorreabsorvíveis de poli (hidroxibutirato-co-hidroxivalerato) (PHBV) e o poli (ε-caprolactona) (PCL). As MSCs (GIBCO®) foram inoculadas nos polímeros puros e na mistura 75:25 de PHBV / PCL (amostras densas e porosas). As células foram mantidas em DMEM (com baixa glicose) contendo GlutaMAX® e 10% de SFB a 37oC com 5% de CO2 por 21 dias. A própria placa foi usada como controle. Os meios de cultura condicionados foram coletados e analisadas em FT-Raman para sondagem de grupos funcionais, bem como possíveis variações moleculares associadas com a diferenciação e metabolismo celular. Foi possível discernir grupos funcionais de moléculas específicas no meio condicionado, como colesterol, fosfatidilinositol, triglicerídeos, forma Beta de polipeptídeos, regiões de amida e ligações de hidrogênio de proteínas, além da expressão de DNA. Na presente avaliação, a FT-Raman apresentou como uma técnica de resolução limitada, uma vez que modos vibracionais de estiramento próximos ou mesmo iguais podem ser expressos por moléculas diferente, dificultando a análise. Não houve variações nas leituras entre as amostras estudadas, concluindo-se que a FT-Raman não atendeu às expectativas nas condições estudadas.

Characterization of sound enamel and natural white spot lesions / Caracterização de esmalte hígido e lesões de mancha branca naturais

Objective: To compare optical, morphological, chemical, and physical aspects of the sound enamel and white spot lesions (WSL) classified as ICDAS 2. Material and Methods: Seventeen human molars with one surface presenting WSL and a sound surface (2 x 2 mm window) were characterized by Quantitative light-induced fluorescence (QLF ®), Optical coherence tomography (OCT), microhardness, and Raman spectroscopy. The ANOVA and Tukey's test were used at 5% significance level. Results: The QLF comparison between distinct substrates yielded decreased ∆Q (integrated fluorescence loss) of -15,37%mm2 and -11,68% ∆F (fluorescence loss) for WSL. The OCT detected mean lesion depth of 174,43 µm. ANOVA could not detect differences in the optical attenuation coefficient between the substrates (p>0.05). Lower microhardness measures were observed in WSL than on sound enamel (p<0.05). The Raman spectra showed four vibrational phosphate bands (v1, v2, v3, v4), where the highest peak was at 960.3 cm-1(v1) for both substrates. However, a 40% decrease in phosphate (v1) was detected in WSL. The peak at 1071 cm-1 was higher for sound enamel, indicating the presence of a phosphate band instead of the B-type carbonate. The spectra showed higher intensity of the organic composition at 1295 cm-1 and 1450 cm -1 for WSL. Conclusion: Non-invasive QLF, OCT and Raman spectroscopy were able to distinguish differences in fluorescence, optical properties, and organic/inorganic components, respectively, between sound enamel and WSL, validated by the destructive microhardness analysis. (AU)

Objetivo: Comparar os aspectos ópticos, morfológicos, químicos e físicos do esmalte sadio e das lesões de mancha branca naturais, classificada como ICDAS 2. Material e métodos: Dezessete molares humanos com uma face apresentando uma lesão de mancha branca natural e outra face o esmalte hígido (2 x 2 mm) foram caracterizados utilizando a Fluorescência quantitativa induzida pela luz (QLF ®), Tomografia de coerência óptica (OCT), Microdureza e Espectroscopia Raman. A ANOVA e o teste de Tukey foram utilizados ao nível de significância de 5%. Resultados: A comparação entre os substratos distintos, utilizando o QLF ® demonstrou uma diminuição no ∆Q (perda de fluorescência integrada) de -15,37%mm2 e -11,68% de ∆F (Perda de fluorescência) para a lesão de mancha branca. O OCT detectou uma profundidade média de lesão de 174,43µm. A ANOVA não detectou diferenças no coeficiente de atenuação óptica entre os substratos (>0,05). Microdureza significantemente menor foi detectada nas lesões de mancha branca do que no esmalte sadio (p<0,05). Os espectros Raman mostraram quatro bandas vibracionais do fosfato (v1,v2,v3,v4), onde o maior pico foi em 960,3cm-1para ambos os substratos. No entanto, uma diminuição de 40% no fosfato (v1) foi detectada na lesão. O pico em 1071cm-1foi maior para o esmalte hígido, demonstrando tratar-se da banda do fosfato, ao invés do carbonato tipo B. Os espectros apresentaram maior intensidade da composição orgânica em 1295cm-1e 1450 cm-1para a lesão de mancha branca. Conclusão:Os métodos não invasivos QLF, OCT e espectroscopia Raman foram capazes dediferenciar a fluorescência, propriedades ópticas e conteúdo orgânico/inorgânico do esmalte sadio comparado com esmalte com lesões de mancha branca, sendo validado pela análise de microdureza. (AU)

Hormônio do crescimento versus treinamento de força: alterações nas estruturas colágenas, lipídicas e glicídicas / Growth hormone (gh) versus strength training: changes in collagen, lipid and glucidic structures

O objetivo deste estudo foi avaliar o efeito da aplicação de hormônio do crescimento (Growth Hormone - GH) e treinamento de força (TF) na composição do tecido ósseo de ratos Wistar a partir da Espectroscopia Raman. 40 ratos machos foram distribuídos de forma aleatória em quatro grupos: controle (C [n=10]), controle a aplicação de GH (GHC [n=10]), treinamento de força (T [n=10]) e treinamento de força e aplicação de GH (GHT [n=10]). O treinamento foi composto por quatro séries de 10 saltos aquáticos, realizados três vezes por semana, com sobrecarga correspondente a 50% do peso corpóreo e duração de quatro semanas. O GH foi aplicado na dose de 0,2 UI/Kg em cada animal, três vezes por semana e em dias alternados. Ao final do experimento, os animais foram eutanasiados e coletados os fêmures direitos para realização da análise da composição óssea. A espectroscopia Raman (ER) foi utilizada para observar os seguintes compostos a partir de suas respectivas bandas: colágeno e fosfolipídio (1445 cm-1), colesterol (548 cm-1), glicerol (607 cm-1), glicose (913 cm-1), Pico de carboidrato (931 cm-1 ) e prolina (918 cm-1 ). Para a análise estatística, foram realizados os testes de normalidade de Shapiro-Wilk e análise de variâncias ANOVA one-way, seguida pelo pós-teste de Tukey. Os resultados revelaram aumento nas concentrações de colágeno e fosfolipidio, colesterol, glicerol, glicose, pico de carboidrato e prolina em todos os grupos experimentais, associados ou não à realização do ST e/ou aplicação de GH. Porém, somente o grupo T diferiu significativamente do grupo C (p<0,05). Conclui-se que todas intervenções puderam promover ganho no tecido ósseo, porém, somente o grupo T demonstrou diferença significativa nos compostos minerais analisados. (AU)

The objective of this study was to evaluate the effect of the application of growth hormone (GH) and strength training (TF) on the bone tissue composition of Wistar rats using Raman Spectroscopy. 40 male rats were randomly assigned to four groups: control (C [n = 10]), control the application of GH (GHC [n = 10]), strength training (T [n = 10]) and training of strength and application of GH (GHT [n = 10]). The training consisted of four series of 10 water jumps, performed three times a week, with an overload corresponding to 50% of body weight and lasting four weeks. GH was applied at a dose of 0.2 IU / kg to each animal, three times a week and on alternate days. After four weeks, the animals were euthanized and the right femurs were collected to carry out the analysis of the bone composition. Raman spectroscopy (ER) was used to observe the following compounds from their respective bands: collagen and phospholipid (1445 cm-1), cholesterol (548 cm-1), glycerol (607 cm-1), glucose (913 cm-1), Peak carbohydrate (931 cm-1), proline (918 cm-1). For statistical analysis, the Shapiro-Wilk normality tests and ANOVA One-Way analysis of variances were performed, followed by the Tukey post-test. The results revealed an increase in the concentrations of collagen and phospholipid, cholesterol, glycerol, glucose, peak carbohydrate and proline in all experimental groups, associated or not with the performance of ST and / or application of GH. However, only group T differed significantly from group C (p <0.05). It was concluded that all intervention could promote gain in bone tissue, however, only the T group showed a significant difference in the analyzed mineral compounds. (AU)

Recent advances in surface-enhanced Raman scattering technique for pollutant detection in Chinese medicinal material / 中国中药杂志

Chinese medicinal material is the foundation of traditional Chinese medicine(TCM) industry. Its quality is not only closely related to the health of residents but also the key to the development of the TCM industry. Pesticide residues, heavy metals and mycotoxins are the major pollutants of Chinese medicinal materials. In recent years, quite a number of rapid detection methods for pollutants have been constructed. Among them, surface-enhanced Raman scattering(SERS), which has been widely used in food chemistry, environmental analysis, and other fields because of its speediness and non-destructiveness, shows its great potential in the pollutant detection in Chinese medicinal material. This paper firstly reviews the application of SERS for the detection of common pollutants in Chinese medicinal material. We then discussed the characteristics and advantages of SERS technique for pesticide detection, including the principle, SERS substrate design, specific recognition, etc. Finally, simultaneous detection of multiple pesticide residues in Chinese medicinal material was explored.

Evaluation of microleakage and the degree of conversion of three composite resins polymerized at different power densities / Avaliação da microinfiltração e do grau de conversão de três resinas compostas polimerizadas em diferentes densidades de potência

Objectives: This study aims to evaluate the degree of conversion (DC) and microlekage scores of three different composite resins polymerized with a LED curing device in standard and extra-power mode. Material and Methods: One bulk-fill (Tetric EvoCeram Bulk-Fill ­ TECBF) and two conventional composite materials (Clearfil Majesty Posterior ­ CMP and Tetric EvoCeram ­ TEC) were evaluated. A total of 30 specimens were prepared for six groups (N = 5). These groups were polymerized with a LED curing device as follows: TECBF-6: 3200mW/cm2 for six seconds, TECBF-20: 1000mW/cm2 for 20 seconds, CMP-6: 3200mW/cm2 for six seconds, CMP-20: 1000mW/cm2 for 20 seconds, TEC-6: 3200mW/cm2 for six seconds, TEC - 20: 1000 mW/cm2 for 20 seconds. After 24 hours of water storage, DC was measured by Raman spectroscopy. Microleakage scores of the six groups were bonded to various adhesive systems (Clearfil SE Bond or Adhese Bond Universal) were also evaluated at Class II box cavities (N = 10). Results: While the highest DC was found at the top (TECBF-20= 79.92% and TECBF-6= 79.02%) and bottom surfaces (TECBF-20 = 68.94% and TECBF-6= 71.04%) for TECBF groups, TEC groups (TEC-20top = 59.06%, TEC-6top=49.66%, TEC-20bottom = 43.72% and TEC-6bottom= 40.68%) showed the lowest DC for the both surfaces (p < 0.05). Polymerization of materials in standard or extra-power mode was similar to DC (p > 0.05). Microleakage scores were found to be similar (p > 0.05). Conclusion: According to the results of the study, different power densities of LED curing light did not affect the DC of composite resins and microleakage values of restorations at small Class II cavities (AU)

Objetivo: este estudo tem como objetivo avaliar os graus de conversão (DC) e microinfiltração de três diferentes resinas compostas polimerizáveis com um dispositivo de luz por LED nos modos padrão e no modo de alta-potência. Material e métodos: uma resina bulk-fill (Tetric EvoCeram Bulk-Fill - TECBF) e dois materiais resinosos convencionais (Clearfil Majesty Posterior - CMP e Tetric EvoCeram - TEC) foram avaliados. Um total de 30 espécimes foram preparados e divididos em seis grupos (N = 5). Esses grupos foram polimerizados com um dispositivo de luz de LED da seguinte forma: TECBF-6: 3200mW / cm2 por seis segundos, TECBF-20: 1000mW / cm2 por 20 segundos, CMP-6: 3200mW / cm2 por seis segundos, CMP20: 1000mW / cm2 por 20 segundos, TEC-6: 3200mW / cm2 por seis segundos, TEC - 20: 1000 mW / cm2 por 20 segundos. Após 24 horas de armazenamento em água, a DC foi medida por espectroscopia Raman. Os escores de microinfiltração dos seis grupos dos vários sistemas adesivos (Clearfil SE Bond ou Adhese Bond Universal) também foram avaliados nas cavidades Classe II (N = 10). Resultados: embora a maior CD tenha sido encontrada nas partes superior (TECBF-20 = 79,92% e TECBF-6 = 79,02%) e inferiores (TECBF-20 = 68,94% e TECBF-6 = 71,04%) para grupos TECBF, os grupos TEC (TEC-20top = 59,06%, TEC-6top = 49,66%, TEC-20bottom = 43,72% e TEC-6bottom = 40,68%) apresentaram as menores CD para as ambas as partes (p < 0,05). A polimerização de materiais no modo padrão ou alta-potência foi semelhante à DC (p > 0,05). Os escores de microinfiltração foram semelhantes (p > 0,05). Conclusão: de acordo com os resultados do estudo, diferentes densidades de potência da luz de LED não afetaram as CD das resinas compostas e os valores de microinfiltração das restaurações em pequenas cavidades da Classe II. (AU)

Application of Raman Spectroscopy in the Diagnosis of Oral Cancer / 中国医学科学院学报

Oral cancer is a common and deadly malignancy.While multidisciplinary treatment(mainly surgery)has been applied in the treatment of cancer treatment,early diagnosis and complete removal of the primary lesion are essential for a better prognosis.Raman spectroscopy is an optical technique that detects inelastic scattered light generated by the interaction of light and matter.It can detect the vibrational spectra of biochemical and biomolecular structures and tissue conformations,and can provide the "molecular fingerprint" for cells,tissues,and biological fluids.With the development of related technologies and optical instruments,Raman spectroscopy has been widely applied in medical fields.This article reviews the research advances and application of Raman spectroscopy in the diagnosis of oral cancer.

Synthesis, characterization, and in vitro evaluation of gamma radiationinduced PEGylated isoniazid

Background: The search for innovative anti-tubercular agents has received increasing attention in tuberculosis chemotherapy because Mycobacterium tuberculosis infection has steadily increased over the years. This underlines the necessity for new methods of preparation for polymer-drug adducts to treat this important infectious disease. The use of poly(ethylene glycol)(PEG) is an alternative producing anti-tubercular derivatives. However, it is not yet known whether PEGylated isonicotinylhydrazide conjugates obtained by direct links with PEG are useful for therapeutic applications. Results: Here, we synthesized a PEGylated isoniazid (PEG-g-INH or PEG­INH) by gamma radiation-induced polymerization, for the first time. The new prodrugs were characterized using Raman and UV/Vis spectrometry. The mechanism of PEGylated INH synthesis was proposed. The in vitro evaluation of a PEGylated isonicotinylhydrazide macromolecular prodrug was also carried out. The results indicated that PEG­INH inhibited the bacterial growth above 95% as compared with INH, which showed a lower value (80%) at a concentration of 0.25 µM. Similar trends are observed for 0.1, 1, and 5 µM. Conclusions: In summary, the research suggests that it is possible to covalently attach the PEG onto INH by the proposed method and to obtain a slow-acting isoniazid derivative with little toxicity in vitro and higher antimycobacterial potency than the neat drug.

Estudio comparativo de la bioactividad de dos materiales biocerámicos / Comparative Study of the Bioactivity of Two Bioceramic Materials

RESUMEN Los materiales a base de silicato de calcio han demostrado ser bioactivos debido a su capacidad para producir apatita carbonatada biológicamente compatible. El objetivo de este estudio fue analizar la bioactividad de Biodentine™ y MTA Repair HP® en contacto con discos de dentina humana, que se obturaron y dividieron aleatoriamente para formar cuatro grupos: grupo 1 Biodentine™, grupo 2 MTA Repair HP®, grupo control positivo MTA Angelus® y grupo control negativo IRM®, los cuales se incubaron en solución PBS durante 10 días, para posterior análisis por medio de MEB-EDS y Espectroscopía Raman. Los tres materiales a base de silicato de calcio analizados en este estudio demostraron ser bioactivos pues al entrar en contacto con una solución a base de fosfato desencadenaron la precipitación inicial de fosfato de calcio amorfo, que actúa como precursor durante la formación de apatita carbonatada.

ABSTRACT Calcium silicate-based materials have been shown to be bioactive due to their ability to produce biologically compatible carbonated apatite. The objective of this study was to analyze the bioactivity of Biodentine ™ and MTA Repair HP® in contact with human dentine discs, which were sealed and divided randomly to form four groups: group 1 Biodentine™, group 2 MTA Repair HP®, positive control group MTA Angelus® and negative control group IRM®, which were incubated in PBS solution for 10 days, for a subsequent analysis by means of MEB-EDS and Raman spectroscopy. The three calcium-based materials analyzed in this study proved to be bioactive because upon contact with a phosphate-based solution they were triggered at the onset of amorphous calcium phosphate, as the precursor during the formation of carbonated apatite.

Muscle strength training is better than the use of growth hormone (GH) in bone health of Wistar rats / Entrenamiento de la fuerza muscular es mejor que el uso de la hormona del crecimiento (GH) en salud ósea del ratas Wistar

SUMMARY: The objective of this study was to evaluate the effects of growth hormone (GH) and muscle strength training (ST) on the composition of bone tissue of Wistar rats through Raman spectroscopy. In total, 40 male rats were randomly distributed into four groups: (N = 10) control (C), control with the application of GH (GHC), strength training (T), and strength training with the application of GH (GHT). The training consisted of four series of 10 water jumps, performed three times a week, with an overload corresponding to 50 % of body weight and duration of four weeks. GH was applied at a dose of 0.2 IU / kg in each animal three times a week and every other day. After four weeks, the animals were euthanized and the right femurs collected for analysis of the bone structure. Raman spectroscopy (ER) was used to observe the following compounds from their respective bands: Calcium Carbonate-Triglycerides (fatty acids) 1073 cm-1, Collagen type I 509 cm-1, Bone-DNA Phosphate (Protein) 589 cm-1, Phosphate Phospholipids 1078 cm-1. For the statistical analysis, the Shapiro-Wilk and ANOVA One-Way variance analysis normality tests were performed, followed by the Tukey post-test. The results showed an increase in the concentrations of calcium carbonate-triglycerides (fatty acids), type I collagen, bone phosphate-DNA (protein), and phosphate phospholipids in all experimental groups, with or without ST and/or GH , But only the isolated training group differed significantly from the control group (P <0.05). It was concluded that all treatments could promote bone tissue gain, however, only the T group demonstrated a significant difference in the mineral compounds analyzed.

RESUMEN: El objetivo del estudio fue avaluar el efecto de la aplicación de la hormona del crecimiento (GH) y entrenamiento de la fuerza muscular (EF) en la composición del tejido óseo de ratas Wistar a partir de la espectroscopía Raman. Fueron utilizadas 40 ratas machos distribuidas de forma aleatoria en cuatro grupos (n=10): control (C), control y aplicación de GH (GHC), entrenamiento de la fuerza muscular (EF) y entrenamiento de la fuerza muscular y aplicación del GH (GHE). El entrenamiento fue consistió en cuatro series de 10 saltos acuáticos, realizados tres veces en la semana, con sobrecarga correspondiente a 50 % de la masa corporal y durante cuatro semanas. El GH fue aplicado en la dosificación de 0,2 UI/kg en cada animal, tres veces en la semana y en días alternados. Después de cuatro semanas, los animales fueran eutanasiados y retirados los fémures derechos para un análisis de la estructura ósea. La espectroscopía Raman fue utilizada para observar los siguientes compuestos a partir de las respectivas bandas: Carbonato de Calcio-Triglicéridos (ácidos grasos) 1073 cm-1, Colágeno Tipo I 509 cm-1, Fosfato Óseo-DNA (Proteína) 589 cm1, Fosfato Fosfolípidos 1078 cm-1. Para el análisis estadístico, fueron realizadas las pruebas Shapiro-Wilk y el análisis de variancia ANOVA One-Way, seguida de test post hoc de Tukey. Los resultados revelaran aumento de la concentración de Carbonato de Calcio-Triglicéridos (ácidos grasos), Colágeno Tipo I, Fosfato Óseo- DNA (Proteína), Fosfato Fosfolípidos en todos los grupos experimentales, asociados o no a la realización del EF y/o aplicación del GH. Además, solamente el grupo EF mostró diferencia significativa del grupo C (p<0,05). Es posible concluir que todos los tratamientos mostraran aumentos en el tejido óseo, sin embargo, solamente el grupo T demostró una diferencia significativa en los compuestos minerales analizados.

Application of fiber Raman endoscopic probe in the diagnosis of gastric cancer / 南方医科大学学报

OBJECTIVE@#To develop a fiber Raman endoscopic probe that can be integrated in a gastroscope and evaluate its value in the diagnosis of gastric cancer.@*METHODS@#The Raman spectra of gastric cancer tissues and normal tissues were obtained using the fiber Raman endoscopic probe and confocal microRaman spectroscopy. After preprocessing with smoothing, baseline elimination and normalization, the spectroscopic data were analyzed by the principle component analyses combined with stechiometry. Based on the pathological results, the diagnostic accuracy, sensitiveness and specificity of Raman spectroscopy combined with stechiometry were evaluated.@*RESULTS@#The fiber Raman endoscopic probe and microRaman spectroscopy revealed significantly different Raman spectra between gastric cancer tissues and normal tissues. The diagnostic accuracy, sensitiveness and specificity of the fiber Raman endoscopic probe was 80.56%, 88.89%, and 84.72% for gastric cancer, respectively.@*CONCLUSIONS@#The fiber Raman endoscopic probe combined with stechiometry provides an effective modality for the diagnosis of gastric cancer and can well distinguish gastric cancer tissue from normal gastric tissues.

Advances in the simulation of light–tissue interactions in biomedical engineering

Monte Carlo (MC) simulation for light propagation in scattering and absorbing media is the gold standard for studying the interaction of light with biological tissue and has been used for years in a wide variety of cases. The interaction of photons with the medium is simulated based on its optical properties and the original approximation of the scattering phase function. Over the past decade, with the new measurement geometries and recording techniques invented also the corresponding sophisticated methods for the description of the underlying light–tissue interaction taking into account realistic parameters and settings were developed. Applications, such as multiple scattering, optogenetics, optical coherence tomography, Raman spectroscopy, polarimetry and Mueller matrix measurement have emerged and are still constantly improved. Here, we review the advances and recent applications of MC simulation for the active field of the life sciences and the medicine pointing out the new insights enabled by the theoretical concepts.

Lesión bucal relacionada con relleno dérmico / Dermal filler-related oral lesion

Introduction: Oral adverse reactions related to natural dermal fillers may originate from infiltration techniques, giving rise to swellings, nodule formation doe to local material entrapment, or displacement or migration of the material used. Objective: describe a case of orofacial foreign body reaction in an elderly patient. Case report: a 65-year-old woman was referred for oral evaluation complaining of an intraoral lesion present for 15 days. Intraoral examination revealed a mobile nodule in the lower lip left portion. After the initial consultation, incisional biopsy was performed under local anesthesia and the surgical specimen was sent for histopathological analysis. Intraoral examination revealed a soft mobile nodule in the lower lip left portion. Clinical pathological and Raman microspectroscopy analysis led to a final diagnosis of calcium hydroxyapatite dermal filler-related reaction. Conclusions: this case reinforces the possibility of dermal filler-related mucosal tissue reactions in oral cavity soft tissues(AU)

Introducción: las reacciones adversas bucales relacionadas con rellenos dérmicos naturales pueden originarse a partir de técnicas de infiltración, lo que ocasiona inflamaciones, formación de nódulos por atrapamiento de material local o desplazamiento o migración del material usado. Objetivo: describir un caso de reacción a cuerpo extraño bucofacial en un adulto mayor. Presentación del caso: una mujer de 65 años de edad fue remitida para evaluación bucal por presentar una lesión intrabucal durante 15 días. El examen intrabucal reveló un nódulo móvil en la porción izquierda del labio inferior. Después de la consulta inicial, se realizó una biopsia incisional bajo anestesia local y se envió la muestra quirúrgica para su análisis histopatológico. El examen intrabucal reveló un nódulo móvil suave en la porción izquierda del labio inferior. El análisis clínico-patológico y de la micro-espectroscopia de Raman condujeron a un diagnóstico final de reacción de hidroxiapatita cálcica relacionada con el relleno dérmico. Conclusiones: este caso refuerza la posibilidad de reacciones cutáneas relacionadas con los rellenos dérmicos en los tejidos mucosos de la cavidad bucal(AU)

Effect on adhesion of a nanocapsules-loaded adhesive system

Abstract This study aimed to evaluate the in situ degree of conversion, contact angle, and immediate and long-term bond strengths of a commercial primer and an experimental adhesive containing indomethacin- and triclosan-loaded nanocapsules (NCs). The indomethacin- and triclosan-loaded NCs, which promote anti-inflammatory and antibacterial effects through controlled release, were incorporated into the primer at a concentration of 2% and in the adhesive at concentrations of 1, 2, 5, and 10%. The in situ degree of conversion (DC, n=3) was evaluated by micro-Raman spectroscopy. The contact angle of the primer and adhesive on the dentin surface (n = 3) was determined by an optical tensiometer. For the microtensile bond strength µTBS test (12 teeth per group), stick-shaped specimens were tested under tensile stress immediately after preparation and after storage in water for 1 year. The data were analyzed using two-way ANOVA, three-way ANOVA and Tukey's post hoc tests with α=0.05. The use of the NC-loaded adhesive resulted in a higher in situ degree of conversion. The DC values varied from 75.07 ± 8.83% to 96.18 ± 0.87%. The use of NCs in only the adhesive up to a concentration of 5% had no influence on the bond strength. The contact angle of the primer remained the same with and without NCs. The use of both the primer and adhesive with NCs (for all concentrations) resulted in a higher contact angle of the adhesive. The longitudinal μTBS was inversely proportional to the concentration of NCs in the adhesive system, exhibiting decreasing values for the groups with primer containing NCs and adhesives with increasing concentrations of NCs. Adhesives containing up to 5% of nanocapsules and primer with no NCs maintained the in situ degree of conversion, contact angle, and immediate and long-term bond strengths. Therefore, the NC-loaded adhesive can be an alternative method for combining the bond performance and therapeutic effects. The use of an adhesive with up to 5% nanocapsules containing indomethacin and triclosan and a primer with no nanocapsules maintained the long-term bond performance.

Effects of experimental bleaching agents on the mineral content of sound and demineralized enamels

Abstract High concentrations of hydrogen peroxide can cause adverse effects on composition and structure of teeth. However, the addition of calcium and fluoride in bleaching agents may reduce enamel demineralization. Objective: To evaluate chemical changes of sound and demineralized enamels submitted to high concentrations of hydrogen peroxide containing fluoride (F) or calcium (Ca). Material and Methods: Enamel blocks of bovine incisors with standard dimensions were obtained and half of them were submitted to pH-cycling to promote initial enamel caries lesions. Sound and demineralized enamel samples were divided into (n=10): (C) Control (no whitening treatment); (HP) 35% hydrogen peroxide; and two experimental groups: (HPF) 35% HP+0.2% F and (HPC) 35% HP+0.2% Ca. Experimental groups were submitted to two in-office bleaching sessions and agents were applied 3 times for 15 min to each session. The control group was kept in remineralizing solution at 37°C during the bleaching treatment. The surface mineral content of sound and demineralized enamels was determined through Fourier Transform Raman spectroscopy (FT-Raman), Energy dispersive Micro X-ray fluorescence spectroscopy (μ-EDXRF); and the subsurface, through cross-sectional microhardness (CSMH). In addition, polarized light microscopy (PLM) images of enamel subsurface were observed. Results: According to three-way (FT-Raman and μ-EDXRF analyses) or two-way analysis of variance (ANOVA) (CSMH) and Tukey test (α=5%), the calcium or fluoride added to high-concentrated bleaching agents increased phosphate and carbonate concentrations on sound and demineralized enamels (p<0.05). However, HPC and HPF were unable to completely reverse the subsurface mineral loss promoted by bleaching on sound and demineralized enamels. The calcium/ phosphate (Ca/P) ratio of sound enamel decreased after HP treatment (p<0.001). Conclusion: Even though experimental bleaching agents with Ca or F reduced mineral loss for both sound and demineralized enamel surfaces, these agents were unable to reverse the enamel subsurface demineralization.

Study of the chemical interaction between a high-viscosity glass ionomer cement and dentin

Abstract Objective To investigate the chemical interactions between a high-viscosity glass ionomer cement (GIC) (KetacTM Molar Easymix, 3M ESPE, Seefeld, Bavaria, Germany) and human dentin. It was also analyzed the dynamics of GIC setting mechanism based on the time intervals required for the GIC and the GIC mixed with dentin to achieve stability. Material and Methods Each constituent of GIC - powder (P) and liquid (L) - and powdered dentin (D), as well as the associations P+L, D+L, and P+L+D in the concentrations of 29%, 50%, 65%, 78%, 82%, and 92% of GIC were analyzed with Fourier transform infrared (FTIR) and Raman spectroscopy. Results New optical absorption bands and/or Raman bands, which were not present in P, L, or D, were observed in the associations. The concentrations of 29% and 50% of GIC showed higher interaction, revealing that the amount of dentin influences the formation of new optical absorption or scattering bands. FTIR bands showed that the setting time to achieve bond stability was longer for the high-viscosity GIC (38±7 min) than for the sample with 29% of GIC (28±4 min). Conclusions The analysis revealed the formation of new compounds or molecular rearrangements resulting from the chemical interactions between GIC and dentin. Moreover, this study provides an effective method to evaluate the dynamics of the setting mechanism of GICs.

Research Progress of Raman Spectroscopy in the Diagnosis of Early Lung Cancer / 中国肺癌杂志

Lung cancer (LC) is the most common cancer and the leading cause of cancer-related death worldwide. The 5-year survival rate for LC remains low at 18% and is 5% for patients with metastatic disease, while the 5-year overall survival rate of patients with stage I NSCLC can reach 77.9%, hence early diagnosis and treatment of LC is the key to improve the prognosis. As a non-invasive detection technique, Raman spectroscopy can realize the non-destructive detection of the differences in molecular level structure between cancerous tissues and normal tissues, which can be used for the early diagnosis of lung cancer. The aim of this review is to summarize the progress of Raman spectroscopycombined with different tissue or body fluid samplesin the diagnosis of early LC.
.

Comparison of removal torque of saline-soaking RBM implants and RBM implants in rabbit tibias / 대한치과보철학회지

PURPOSE: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM surface treatment. MATERIALS AND METHODS: The control group was RBM surface treated implants (RBM), and the test group was implants soaked in saline for 2 weeks after RBM surface treatment (RBM+Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. RESULTS: There was no significant difference in insertion torque and removal torque between RBM surface treated titanium implants and saline-soaked titanium implants after RBM surface treatment. CONCLUSION: Saline soaking after RBM surface treatment of titanium implants did not positively affect the initial osseointegration as compared to titanium implants with only RBM surface treatment.

On the effect of saline immersion to the removal torque for resorbable blasting media and acid treated implants

PURPOSE: The purpose of this study is to investigate the effect of the titanium implant soaked in saline after RBM and acid etched surface treatment on the initial osseointegration by comparing the removal torque and the surface analysis compared to the titanium implant with only RBM and acid etched surface treatment. MATERIALS AND METHODS: The control group was RBM and acid etched surface treated implants (RBM + HCl), and the test group was implants soaked in saline for 2 weeks after RBM and acid etched surface treatment (RBM + HCl + Sal). The control and test group implants were placed in the left and right tibiae of 10 rabbits, respectively, and at the same time, the insertion torque (ITQ) was measured. After 10 days, the removal torque (RTQ) was measured by exposing the implant site. FE-SEM, EDS, Surface roughness and Raman spectroscopy were performed for the surface analysis of the new implant specimens used in the experiments. RESULTS: There was significant difference in insertion torque and removal torque between control group and experimental group (P = 0.014 < 0.05). Surface roughness of experimental group is higher than control group. CONCLUSION: Saline soaking after RBM and acid etched surface treatment of titanium implants were positively affect the initial osseointegration as compared to titanium implants with only RBM and acid etched surface treatment.

Anti-senescence effect and molecular mechanism of the major royal jelly proteins on human embryonic lung fibroblast (HFL-I) cell line / 浙江大学学报（英文版）（B辑：生物医学和生物技术）

Royal jelly (RJ) from honeybee has been widely used as a health promotion supplement. The major royal jelly proteins (MRJPs) have been identified as the functional component of RJ. However, the question of whether MRJPs have anti-senescence activity for human cells remains. Human embryonic lung fibroblast (HFL-I) cells were cultured in media containing no MRJPs (A), MRJPs at 0.1 mg/ml (B), 0.2 mg/ml (C), or 0.3 mg/ml (D), or bovine serum albumin (BSA) at 0.2 mg/ml (E). The mean population doubling levels of cells in media B, C, D, and E were increased by 12.4%, 31.2%, 24.0%, and 10.4%, respectively, compared with that in medium A. The cells in medium C also exhibited the highest relative proliferation activity, the lowest senescence, and the longest telomeres. Moreover, MRJPs up-regulated the expression of superoxide dismutase-1 (SOD1) and down-regulated the expression of mammalian target of rapamycin (MTOR), catenin beta like-1 (CTNNB1), and tumor protein p53 (TP53). Raman spectra analysis showed that there were two unique bands related to DNA synthesis materials, amide carbonyl group vibrations and aromatic hydrogens. These results suggest that MRJPs possess anti-senescence activity for the HFL-I cell line, and provide new knowledge illustrating the molecular mechanism of MRJPs as anti-senescence factors.