Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Añadir filtros








Intervalo de año
1.
Artículo en Inglés | IMSEAR | ID: sea-154676

RESUMEN

Introduction: A proper cast is essential for a successful rehabilitation with implant prostheses, in order to produce better structures and induce less strain on the implants. Aims: The aim of this study was to evaluate the precision of four different mold filling techniques and verify an accurate methodology to evaluate these techniques. Materials and Methods: A total of 40 casts were obtained from a metallic matrix simulating three unit implant-retained prostheses. The molds were filled using four different techniques in four groups (n = 10): Group 1 - Single-portion filling technique; Group 2 - Two-step filling technique; Group 3 - Latex cylinder technique; Group 4 - Joining the implant analogs previously to the mold filling. A titanium framework was obtained and used as a reference to evaluate the marginal misfit and tension forces in each cast. Vertical misfit was measured with an optical microscope with an increase of 120 times following the single-screw test protocol. Strain was quantified using strain gauges. Data were analyzed using one-way ANOVA (Tukey's test) (α =0.05). The correlation between strain and vertical misfit was evaluated by Pearson test. Results: The misfit values did not present statistical difference (P = 0.979), while the strain results showed statistical difference between Groups 3 and 4 (P = 0.027). Conclusions: The splinting technique was considered to be as efficient as the conventional technique. The strain gauge methodology was accurate for strain measurements and cast distortion evaluation. There was no correlation between strain and marginal misfit.


Asunto(s)
Técnica de Colado Dental/métodos , Modelos Dentales/métodos , Prótesis Dental de Soporte Implantado/métodos
2.
Artículo en Inglés | IMSEAR | ID: sea-154643

RESUMEN

The vital steps in any endodontic treatment are thorough mechanical shaping and chemical cleaning followed by obtaining a fluid tight impervious seal by an inert obturating material. For the past two decades, introduction and use of rotary nickel‑titanium (Ni‑Ti) files have changed our concepts of endodontic treatment from conventional to contemporary. They have reported good success rates, but still have many drawbacks. The Self‑Adjusting File (SAF) introduces a new era in endodontics by performing the vital steps of shaping and cleaning simultaneously. The SAF is a hollow file in design that adapts itself three‑dimensionally to the root canal and is a single file system, made up of Ni‑Ti lattice. The case series presented in the paper report the clinical experience, while treating primary endodontic cases with the SAF system in India.


Asunto(s)
Adulto , Instrumentos Dentales/instrumentación , Instrumentos Dentales/métodos , Modelos Dentales/instrumentación , Modelos Dentales/métodos , Endodoncia/instrumentación , Endodoncia/métodos , Humanos , India , Masculino
3.
Artículo en Inglés | IMSEAR | ID: sea-154564

RESUMEN

Maxillofacial prostheses are usually fabricated on the basis of conventional impressions and techniques. The extent to which the prosthesis reproduces normal facial morphology depends on the clinical judgment and skill of the individual fabricating the prosthesis. Recently, as a result of advances in technology, various computer-aided design and manufacturing techniques have been successfully introduced for the automated fabrication of maxillofacial prostheses. These systems are able to provide more consistently accurate reproduction of facial morphology.


Asunto(s)
Diseño Asistido por Computadora , Modelos Dentales/métodos , Prótesis Dental/tendencias , Prótesis Maxilofacial/métodos , Prótesis Maxilofacial/tendencias
4.
Rev. Assoc. Paul. Cir. Dent ; 47(4): 1111-5, jul.-ago. 1993. tab, ilus
Artículo en Portugués | LILACS, BBO | ID: biblio-855531

RESUMEN

Os autores realizaram uma pesquisa visando estudar a influência da união prévia dos dentes artificiais na confecção das próteses totais antes da prensagem, a fim de observar em qual fase laboratorial (inclusão, polimerização ou demuflagem) tais alterações no plano horizontal possam ocorrer. Verificou-se que tanto a fixação quanto a não-fixação dos dentes artificiais não impedem suas movimentações durante a inclusão e polimerização das próteses totais


Asunto(s)
Humanos , Dentadura Completa , Implantes Dentales/métodos , Modelos Dentales/métodos , Diente Artificial/estadística & datos numéricos
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA