A Biomechanical Comparison between Taylor’s Spatial Frame and Ilizarov External Fixator

Taylor’s spatial frame (TSF) and Ilizarov external fixators (IEF) are two circular external fixator commonly used to address complex deformity and fractures. There is currently no data available comparing the biomechanical properties of these two external fixators. This study looks into the mechanical characteristics of each system. TSF rings with 6 oblique struts, 4 tube connectors, 4 threaded rods, and 6 threaded rods were compared to a standard IEF rings with 4 threaded rods. Compression and torsional loading was performed to the frame as well as construct with Polyvinylchloride tubes. TSF rings with 4 tube connectors had the highest stiffness (3288 N/mm) while TSF rings with 6 struts was the least stiff. The situation was reversed for torsion where TSF rings with 6 oblique struts had the highest torsional stiffness (82.01 Nm/Degree) and frame Ilizarov rings with 4 threaded rods the least. Standard TSF construct of two ring with 6 oblique struts have better torsional stiffness and lower axial stiffness compared to the standard IEF.

Pattern of Distal Radius Fracture in Malaysian Children

Introduction: The distal radius is the most common fracture site in children, but local information on the fracture pattern, mechanism of injury and socio-demographic characteristics of the fracture is lacking. Material methods: We interviewed 126 children and their family members who were under follow up for this fracture in a single institution over a period of 2 years. Radiological images were reviewed to ensure that only those with fracture in the distal one third of the forearm were included. Results: The overall incidence of this fracture increased with age, and male dominance was noted starting from schooling age. Most fractures occurred at home (38.8%), and 52.3% of all fractures were due to low energy falls. Sports injuries were mainly due to playing football, and road accidents due to riding bicycles. There were 49 (38.8%) children with incomplete fractures, and 19 (15.0%) with physeal plate fractures. Conclusion: Male dominance for distal radius fracture occurred at a comparatively younger age in our population. Preventive measures should focus on home environment since this is the most common place for fracture to occur. Special attention should be paid to boys after the school going age.

Use of the Tip-Apex Distance in predicting Dynamic Hip Screw Cut Out in Intertrochanteric Fracture of the Femur in Asian Population

The objective of this study was to assess the rate of screw cut out in elderly patients treated with the dynamic hip screw and the relationship to the Tip Apex Distance (TAD). This is a retrospective radiological evaluation of 100 cases of elderly patients with intertrochanteric fracture treated with dynamic hip screw fixation surgically treated between 1998 and 2002. The incidence of screw cut out was assessed and correlation of risk of cut out with the TAD was assessed. The rate of screw cut out was 9.0% and the average length of time to screw cut out was 3.8 months (range, 1 to 6 months) postoperatively. The incidence of screw cut out increased significantly when the TAD was 20 mm or more. The screw cut out rates were 2.9%, 20.0%, 30.8%, 50% and 100% for TAD of 20-24 mm, 25-29 mm, 30-34 mm, 35-44 mm and > 45 mm respectively. Overall, a TAD of 20mm or more was associated with a statistically significant screw cut out risk in this Malaysian population.