Your browser doesn't support javascript.
loading
Montrer: 20 | 50 | 100
Résultats 1 - 4 de 4
Filtre
Ajouter des filtres








Gamme d'année
1.
The Journal of Advanced Prosthodontics ; : 271-280, 2023.
Article Dans Anglais | WPRIM | ID: wpr-1002879

Résumé

PURPOSE@#. This in vitro study aimed to compare the accuracy of the conventional facebow system and the newly developed POP (PNUD (Pusan National University Dental School) Occlusal Plane) bow system for occlusal plane transfer in asymmetric ear position. @*MATERIALS AND METHODS@#. Two dentists participated in this study, one was categorized as Experimenter 1 and the other as Experimenter 2 based on their clinical experience with the facebow (1F, 2F) and POP bow (1P, 2P) systems. The vertical height difference between the two ears of the phantom model was set to 3 mm. Experimenter 1 and Experimenter 2performed the facebow and POP bow systems on the phantom model 10 times each, and the transfer accuracy was analyzed. The accuracy was evaluated by measuring the angle between the reference virtual plane (RVP) of the phantom model and the experimental virtual plane (EVP) of the upper mounting plate through digital superimposition. All data were statistically analyzed using a paired t-test (P .05). @*CONCLUSION@#. In cases of asymmetric ear position, the POP bow system may transfer occlusal plane information more accurately than the facebow system in the frontal view, regardless of clinical experience.

2.
The Journal of Korean Academy of Prosthodontics ; : 110-117, 2019.
Article Dans Coréen | WPRIM | ID: wpr-742108

Résumé

PURPOSE: This study was to evaluate the wear resistance of 3D printed, milled, and conventionally cured provisional resin materials. MATERIALS AND METHODS: Four types of resin materials made with different methods were examined: Stereolithography apparatus (SLA) 3D printed resin (S3P), digital light processing (DLP) 3D printed resin (D3P), milled resin (MIL), conventionally self-cured resin (CON). In the 3D printed resin specimens, the build orientation and layer thickness were set to 0° and 100 µm, respectively. The specimens were tested in a 2-axis chewing simulator with the steatite as the antagonist under thermocycling condition (5 kg, 30,000 cycles, 0.8 Hz, 5℃/55℃). Wear losses of the specimens were calculated using CAD software and scanning electron microscope (SEM) was used to investigate wear surface of the specimens. Statistical significance was determined using One-way ANOVA and Dunnett T3 analysis (α = .05). RESULTS: Wear losses of the S3P, D3P, and MIL groups significantly smaller than those of the CON group (P .05). In the SEM observations, in the S3P and D3P groups, vertical cracks were observed in the sliding direction of the antagonist. In the MIL group, there was an overall uniform wear surface, whereas in the CON group, a distinct wear track and numerous bubbles were observed. CONCLUSION: Within the limits of this study, provisional resin materials made with 3D printing show adequate wear resistance for applications in dentistry.


Sujets)
Vêtements , Odontologie , Techniques in vitro , Mastication , Méthodes , Impression tridimensionnelle
3.
Environmental Health and Toxicology ; : e2015016-2015.
Article Dans Anglais | WPRIM | ID: wpr-137605

Résumé

No abstract available.


Sujets)
Écotoxicologie , Humidificateurs , Santé publique , Auto-examen
4.
Environmental Health and Toxicology ; : e2015016-2015.
Article Dans Anglais | WPRIM | ID: wpr-137604

Résumé

No abstract available.


Sujets)
Écotoxicologie , Humidificateurs , Santé publique , Auto-examen
SÉLECTION CITATIONS
Détails de la recherche