Application and thinking of cone beam computed tomography directing technology on teaching of dental microscope treatment to endodontic disease / 中华医学教育探索杂志

Endodontic treatment with the use of dental operating microscope is a difficult part in teaching. We have applied cone beam computed tomography (CBCT) guided technology for microendodontic training of dental students who are in their 5th year of the 7 year course to pursue their master's degree. The process of teaching is constituted of preoperative analysis, operation guided by CBCT, postoperative therapeutic evaluation. And the result of teaching quality is acquired by questionnaire. This method improved student's capacities of analysis and solution in intractable cases and greatly motivated students' participa-tion, as well as promoting their learning efficiency. The application of this technique in teaching process compensates the deficiency of traditional teaching method by shaking off the fetters of experience-dependent pattern in the endodontic microscope teaching, and is worth to be popularized in endodontic education.

Biomodifying effect of epigallocatechin-3-gallate on dentine substrate splicing surface / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the effect of epigallocatechin-3-gallate (EGCG) on biomodification of demineralized dentine substrate, in its permeability, hydrophobicity, and inhibition ability to collagen enzymatic degradation.</p><p><b>METHODS</b>The dentine substrates were treated with simulated pulpal pressure created by mixtures of 0.02%, 0.1% EGCG/bovine serum albumin (BSA) in acidic environment (pH4.4) for 48 h. A fluid-transport model was used to measure the fluid permeability through demineralized dentine substrate. Positive replicas of dentine substrate were fabricated before and after being subjected to acidic environment for scanning electron microscope (SEM) examination. The blank group contained no EGCG and the positive group were treated with Gluma desensitizer. Static contact angle measurements on demineralized dentin and 0.1% EGCG primed dentin were performed by contact angle analyzer. The priming time were 60 s, 120 s, 0.5 h, 1 h. Dentine specimens bonded with Adper single bond 2 were subjected to 100 mg/L collagenase and observed under SEM. Resin-bonded specimens (with 0.02%, 0.1%, 0.5% EGCG priming, or without EGCG priming) were created for micro-tensile bond strength evaluation (MTBS). Resin-bonded specimens after thermol cycling were created for MTBS evaluation.</p><p><b>RESULTS</b>The fluid permeability in the blank control group increased ([151.3±22.3]%), the fluid permeability in 0.1% EGCG/BSA group decreased ([23.7±6.3]%). Compared to the blank control group, the contact angle of 120 s, 0.5 h, 1 h groups increased by 31.0%, 53.5%, 57.8% in deep dentin and 37.4%, 59.3%, 62.4% in shallow dentin. The SEM examination showed that 0.1% and 0.5% EGCG priming for 120 s significantly increased dentin collagen's resistance to collagenase. The immediate MTBS of 0.1% and 0.5% EGCG groups were (29.4±4.8) and (19.8± 4.9) MPa. After thermol cycling, the MTBS of 0.1% and 0.5% EGCG groups were (19.9±5.1) and (15.3± 6.3) MPa.</p><p><b>CONCLUSIONS</b>Under acidic environment (pH4.4), the 0.1% EGCG can reduce dentine permeability under acidic environment. The 0.1% EGCG can increase hydrophobicity of dentin substrate, and strengthen dentin substrate's resistance to collagenase hydrolysis, thus increased the resin-dentin bonding durability.</p>

Biomimetic mineralization of a single-layer reconstituted type I collagen model induced by sodium tripolyphosphate and polyacrylic acid / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To investigate the functions of sodium tripolyphosphate (STTP) and polyacrylic acid (PAA) in the process of collagen biomimetic mineralization. This would allow future applications to other collagen matrices such as bone collagen or 3-D collagen scaffolds.</p><p><b>METHODS</b>Glass cover slips and transmission electron microscopy (TEM) grids were coated with reconstituted typeIcollagen fibrils. Mineralization of the reconstituted collagens was demonstrated with scanning electron microscopy (SEM) and TEM using a Portland cement-containing resin composite and a phosphate-containing fluid in the presence of PAA and STTP. The rest were immersed in a biomimetic remineralization medium without PAA and/or STTP (control).</p><p><b>RESULTS</b>In the presence of PAA and STTP in the mineralization medium, intrafibrillar mineralization based on the non-classical crystallisation pathway could be identified. Mineral phases were evident within the collagen fibrils as early as 12 h after the initially-formed amorphous calcium phosphate nanoprecursors were transformed into apatite nanocrystals. Collagens at 72 h were heavily mineralized with periodically arranged intrafibrillar apatite platelets. Conversely, only large mineral spheres with no preferred association with collagen fibrils were observed in the absence of biomimetic analogues in the medium (control).</p><p><b>CONCLUSIONS</b>Intrafibrillar apatite deposition can be achieved via biomimetic mineralization system containing PAA and STTP when amorphous calcium phosphate precursor is stabilized.</p>

In vitro study of shaping ability of single-file techniques in curved canals / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To compare the shaping quality in curved canals of two single-file technique systems with other two traditional full-sequential systems.</p><p><b>METHODS</b>Eighty mature molar canals with the curvature between 20 and 45 degrees were randomly divided into four groups. Specimens in each group were prepared to size 25 at working length using A (Reciproc), B (OneShape), C (MTwo) and D (Revo S), respectively. Each canal was scanned by micro-computed tomography before and after preparation. Parameters including changes in dentine volume, percentage of uninstrumented area, degree and tendency of transportation were analyzed. The operating time was also recorded.</p><p><b>RESULTS</b>In full canal length, there was no difference in canal dentine removal, instrumented percentage and transportation degree among four groups (P > 0.05). In the apical 4 mm region, group A removed more dentine [(2.14±0.76) mm(2) of canal surface area and (0.38 ± 0.15) mm(3) of canal volume] than groups B and C(P < 0.05). At 1 mm level, median of transportation degree of group A was 0.05 (0.03)mm, which was smaller than other groups (P < 0.05). Groups A and B took (86.3±24.6) s and (85.9±21.3) s, while groups C and D took (147.4±28.3) s and (126.3±27.7) s srespectively to finish preparation. Single file techniques were significantly faster than the two full-sequential systems (P < 0.01).</p><p><b>CONCLUSIONS</b>Compared with the continuous rotary systems, the reciprocating single-file system A showed better apical shaping ability. Both single-file techniques were more efficient than full-sequential systems for curved canal preparation. Single-file techniques appear to be the effective and efficient method for curved canal preparation.</p>

Sealing properties of three resin-based sealers / 中华口腔医学杂志

<p><b>OBJECTIVE</b>To evaluate the sealing properties of three resin- based sealers, EndoREZ, RealSEAL and RealSEAL SE.</p><p><b>METHODS</b>Forthy-eight extracted human anterior teeth with single root and canal were prepared using ProTaper files with crown-down technique to F3. The teeth were filled with three sealer respectively with hot gutta- percha vertical condensation technique simulating the clinical situation. Leakage quantity was detected using computerized fluid filtration meter with 10 samples in each group. The cross section morphology of apical parts of roots of 5 mm was observed with scanning electron microscope and transmission electron microscope in 3 samples of each group, respectively.</p><p><b>RESULTS</b>The leakage quantity of EndoREZ, RealSEAL and RealSEAL SE were (2.61±0.60), (1.43±0.11) and (1.76±0.18) µl/min, respectively. The gaps between the the sealer and the canal wall were increased in in order of RealSEAL, RealSEAL SE and EndoREZ. No obvious demineralized dentin under EndoREZ and the smear layer was not completed removed. The partly demineralized dentin was observed under RealSEAL and the smear layer was totally removed. The partly demineralized dentin was seen under RealSEAL SE and the majority of smear layer was removed.</p><p><b>CONCLUSIONS</b>Among the three resin- based sealers, RealSEAL has the best sealing properties, followed by RealSEAL SE and EndoREZ.</p>