Your browser doesn't support javascript.
loading
Montrer: 20 | 50 | 100
Résultats 1 - 10 de 10
Filtrer
1.
Braz. oral res. (Online) ; 29(1): 1-6, 2015. tab, ilus
Article de Anglais | LILACS | ID: lil-777229

RÉSUMÉ

Root canal preparation is an important step in endodontic treatment. The anatomical complexity of the middle third of the root compromises the effective cleaning of this area. Thus, advances have been made in instrumentation techniques and instruments for this purpose. The aim of this study was to evaluate the effects of three different instrumentation systems on the enlargement of the middle thirds of root canals in mandibular incisors. The preparation methods used were the reciprocating systems Reciproc (Group I) and WaveOne (Group II) and the oscillatory system Tilos (Group III). Comparisons were made by three-dimensional image reconstruction with cone-beam computed tomography before and after instrumentation. Changes in area, perimeter, centering ability, and pattern of preparation were analyzed. The results were subjected to ANOVA complemented by the Tukey’s test. Changes in area, perimeter, and tendency of transportation showed similar results among groups. The transportation index of the Tilos system was significantly lower than that of the other groups. Qualitative analysis of the preparation pattern showed that the Tilos system had a more uniform preparation, although Reciproc and WaveOne preparations appeared more rounded, incompatible with the original canal anatomy. There was similarity in the systems’ performance on flattened areas, although the Tilos system presented a better pattern of root canal preparation and a lower index of transportation.


Sujet(s)
Humains , Tomodensitométrie à faisceau conique/méthodes , Cavité pulpaire de la dent/anatomie et histologie , Cavité pulpaire de la dent , Conception d'appareillage , Préparation de canal radiculaire/instrumentation , Analyse de variance , Instruments dentaires , Imagerie tridimensionnelle , Test de matériaux , Nickel , Reproductibilité des résultats , Préparation de canal radiculaire/méthodes , Statistique non paramétrique , Facteurs temps , Titane
2.
Braz. oral res. (Online) ; 29(1): 1-7, 2015. tab, ilus
Article de Anglais | LILACS | ID: lil-777230

RÉSUMÉ

The present study aimed to assess the influence of curing distance on the loss of irradiance and power density of four curing light devices. The behavior in terms of power density of four different dental curing devices was analyzed (Valo, Elipar 2, Radii-Cal, and Optilux-401) using three different distances of photopolymerization (0 mm, 4 mm, and 8 mm). All devices had their power density measured using a MARC simulator. Ten measurements were made per device at each distance. The total amount of energy delivered and the required curing time to achieve 16 J/cm2 of energy was also calculated. Data were statistically analyzed with one-way analysis of variance and Tukey’s tests (p < 0.05). The curing distance significantly interfered with the loss of power density for all curing light devices, with the farthest distance generating the lowest power density and consequently the longer time to achieve an energy density of 16 J/cm2 (p < 0.01). Comparison of devices showed that Valo, in extra power mode, showed the best results at all distances, followed by Valo in high power mode, Valo in standard mode, Elipar 2, Radii-Cal, and Optilux-401 halogen lamp (p < 0.01). These findings indicate that all curing lights induced a significant loss of irradiance and total energy when the light was emitted farther from the probe. The Valo device in extra power mode showed the highest power density and the shortest time to achieve an energy density of 16 J/cm2 at all curing distances.


Sujet(s)
Lampes à photopolymériser dentaires , Résines composites/effets des radiations , Photopolymérisation d'adhésifs dentaires/instrumentation , Photopolymérisation d'adhésifs dentaires/méthodes , Analyse de variance , Résines composites/composition chimique , Équipement dentaire , Test de matériaux , Polymérisation/effets des radiations , Dose de rayonnement , Équipement et fournitures pour les applications des radiations , Valeurs de référence , Reproductibilité des résultats , Statistique non paramétrique , Facteurs temps
3.
Braz. oral res ; 27(1): 26-30, Jan.-Feb. 2013. tab
Article de Anglais | LILACS | ID: lil-660455

RÉSUMÉ

The aim of this study was to compare two endodontic preparation systems using micro-CT analysis. Twenty-four one-rooted mandibular premolars were selected and randomly assigned to two groups. The samples (n = 12) of Group 1 were prepared using the ProTaper Universal rotary system, while Group 2 (n = 12) was prepared using the EndoEZE AET system complemented by manual apical preparation with K-type hand files up to #30. A 2.5% sodium hypochlorite solution was used in both groups for irrigating. Both groups were scanned by high-resolution microcomputed tomography before and after preparation (SkyScan 1172, SkyScan, Kontich, Belgium). The root canal volume and surface area was measured before and after preparation, and the differences were calculated and analyzed for statistically significant differences using ANOVA complemented by the Tukey test (p < 0.05). The results showed no statistically significant differences between the mean volumes of dentin removal by the two systems. However, the EndoEZE AET system presented a significantly greater mean surface area compared to the ProTaper system (p < 0.05). The EndoEZE AET system enabled preparation of a greater root canal surface area when compared to the ProTaper Universal system. There seemed to be no difference in dentin volume loss between the two systems used.


Sujet(s)
Humains , Instruments dentaires , Cavité pulpaire de la dent , Préparation de canal radiculaire/instrumentation , Microtomographie aux rayons X , Alliage dentaire , Dentine/composition chimique , Conception d'appareillage , Nickel , Répartition aléatoire , Reproductibilité des résultats , Préparation de canal radiculaire/méthodes , Acier inoxydable , Statistique non paramétrique , Propriétés de surface , Titane
4.
Braz. oral res ; 26(4): 323-329, July-Aug. 2012. ilus, tab
Article de Anglais | LILACS | ID: lil-640717

RÉSUMÉ

Dentin wall structural changes caused by 810-nm-diode laser irradiation can influence the sealing ability of endodontic sealers. The objective of this study was to evaluate the apical leakage of AH Plus and RealSeal resin-based sealers with and without prior diode laser irradiation. Fifty-two single-rooted mandibular premolars were prepared and divided into 4 groups, according to the endodontic sealer used and the use or non-use of laser irradiation. The protocol for laser irradiation was 2.5W, continuous wave in scanning mode, with 4 exposures per tooth. After sample preparation, apical leakage of 50% ammoniacal silver nitrate impregnation was analyzed. When the teeth were not exposed to irradiation, the RealSeal sealer achieved the highest scores, showing the least leakage, with significant differences at the 5% level (Kruskal-Wallis test, p = 0.0004), compared with AH Plus. When the teeth were exposed to the 810-nm-diode laser irradiation, the sealing ability of AH Plus sealer was improved (p = 0282). In the RealSeal groups, the intracanal laser irradiation did not interfere with the leakage index, showing similar results in the GRS and GRSd groups (p = 0.1009).


Sujet(s)
Humains , Percolation dentaire , Lasers à semiconducteur , Produits d'obturation des canaux radiculaires/effets des radiations , Dentine/composition chimique , Dentine/effets des radiations , Résines époxy/composition chimique , Résines époxy/effets des radiations , Microscopie électronique à balayage , Répartition aléatoire , Produits d'obturation des canaux radiculaires/composition chimique , Obturation de canal radiculaire/méthodes , Statistique non paramétrique , Propriétés de surface
5.
Braz. dent. j ; Braz. dent. j;22(5): 377-381, 2011. ilus
Article de Anglais | LILACS | ID: lil-601837

RÉSUMÉ

The purpose of this in vitro study was to evaluate the effect of neodymium:yttrium-aluminum-garnet (Nd:YAG) laser irradiation on intracanal dentin surface by SEM analysis and its interference in the apical seal of filled canals. After endodontic treatment procedures, 34 maxillary human incisors were randomly assigned to 2 groups. In the negative control group (n=17), no additional treatment was performed and teeth were filled with vertically condensed gutta-percha; in the laser-treated group (n=17), the root canals were irradiated with Nd:YAG laser (1.5 W, 100 mJ, 15 Hz) before filling as described for the control group. Two specimens of each group were prepared for SEM analysis to evaluate the presence and extent of morphological changes and removal of debris; the other specimens were immersed in 0.5 percent methylene blue dye (pH 7.2) for 24 h for evaluation of the linear dye leakage at the apical third. SEM analysis of the laser-treated group showed dentin fusion and resolidification without smear layer or debris. The Student’s t-test showed that the laser-treated group had significantly less leakage in apical third than the control group. Within the limitations of this study, it may be concluded that the morphological changes on the apical intraradicular dentin surface caused by Nd:YAG laser resulted in less linear dye apical leakage.


Sujet(s)
Humains , Percolation dentaire/classification , Cavité pulpaire de la dent/effets des radiations , Dentine/effets des radiations , Lasers à solide/usage thérapeutique , Produits d'obturation des canaux radiculaires/usage thérapeutique , Apex de la racine de la dent/effets des radiations , Agents colorants , Collage dentaire , Cavité pulpaire de la dent/ultrastructure , Dentine/ultrastructure , Résines époxy/composition chimique , Résines époxy/usage thérapeutique , Gutta-percha/composition chimique , Gutta-percha/usage thérapeutique , Test de matériaux , Microscopie électronique à balayage , Bleu de méthylène , Produits d'obturation des canaux radiculaires/composition chimique , Obturation de canal radiculaire/méthodes , Préparation de canal radiculaire/méthodes , Boue dentinaire , Facteurs temps , Apex de la racine de la dent/ultrastructure
6.
RSBO (Impr.) ; 6(2): 163-168, jun. 2009. ilus, tab
Article de Portugais | LILACS-Express | LILACS | ID: lil-514884

RÉSUMÉ

Introdução e objetivo: Buscou-se avaliar in vitro o grau de aquecimento promovido no interior da câmara pulpar após o uso de diferentes agentes clareadores, com ou sem ativação por fontes de luz. Material e métodos: Foram utilizados 60 dentes incisivos bovinos, que receberam acesso ao canal radicular pela face lingual, com a parede vestibular padronizada em 2 mm. Os espécimes foram divididos em 6 grupos (n = 10), de acordo com o agente clareador e a fonte de ativação utilizada: G1 - ausência de agente clareador e aplicação de luz halógena; G2 - ausência de agente clareador e aplicação de LED; G3 - aplicação do agente clareador Whiteness HP Maxx (peróxido de hidrogênio 35%) e ativação com luz halógena; G4 - aplicação do agente clareador Whiteness HP Maxx (peróxido de hidrogênio 35%) e ativação com LED; G5 - aplicação do agente clareador Opalescence Xtra Boost (peróxido de hidrogênio 38%) e ativação com fotopolimerizador; G6 - aplicação do agente clareador Opalescence Xtra Boost (peróxido de hidrogênio 38%) e ativação com LED. A variação da temperatura na câmara pulpar foi mensurada com um aparelho termopar. Resultados: Os valores de temperatura foram medidos pelo aparelho durante 10 minutos, com alguns intervalos selecionados: t1 - temperatura inicial; t2 - após 25 segundos de aplicação do gel e 20 segundos de ativação; t3 - após 10 minutos. Os valores obtidos foram registrados pela máquina no software, e os dados foram submetidos à análise estatística pelo teste Anova. Verificou-se que o aumento da temperatura não foi significante em todos os grupos testados. Conclusão: Não foram encontradas diferenças estatisticamente significantes entre os grupos com e sem ativação por fontes de luz ou entre os diferentes clareadores.


Introduction and objective: To evaluate in vitro the degree of warming promoted within the pulp chamber, after the use of bleaching agents, with or without activation by light sources. Material and methods: Sixty bovine teeth were used, which had received access to the root canal by the side lingual, with the wall vestibular standardized at 2 mm. The specimens were divided into 6 groups (n = 10), according to the bleaching agent and the source of activation used: G1 - absence of bleaching agent and application of halogen light; G2 - absence of bleaching agent and application of LED; G3 - application of the Whiteness HP Maxx (35% hydrogen peroxide) and activation with halogen light; G4 - application of Whiteness HP Maxx (35% hydrogen peroxide) and activation with LED; G5 - application of the Opalescence Xtra Boost (38% hydrogen peroxide) and activation with photopolymerizer; G6 - application of the Opalescence Xtra Boost (38% hydrogen peroxide) and activation with LED. The change of temperature in the pulp chamber was measured using a Termopar apparatus. Results: The values of temperature were measured by the device during an interval of 10 minutes, with some selected intervals: t1 - initial temperature; t2 - after 25 seconds of application of the gel and 20 seconds of activation; t3 - after 10 minutes. The values were registered by the machine in the software and the data were subjected to statistical analysis using the Anova test. Conclusion: There were no statistically significant differences between groups with and without activation or between different bleaching.

7.
Rev. odonto ciênc ; 24(1): 45-48, jan.-mar. 2009. ilus, tab
Article de Portugais | LILACS, BBO | ID: lil-506376

RÉSUMÉ

Objetivo: O objetivo deste trabalho foi avaliar o uso do ultra-som na remoção de retentores intra-radiculares metálicos fundidos (RI). Metodologia: Foram utilizados 30 dentes humanos unirradiculados tratados endodonticamente e divididos em três grupos: grupo G1 - retentores intra-radiculares do tipo convencional, sem nenhum tipo de retenção mecânica adicional (tipo liso); grupo G2 - retentores intra-radiculares com sulcos longitudinais (tipo canaleta) e grupo G3 - retentores intra-radiculares com sulcos transversais (tipo anelado). Os retentores foram cimentados nos canais radiculares com cimento fosfato de zinco e os espécimes armazenados por 24 h em temperatura ambiente. Para a remoção dos retentores utilizou-se o ultra-som e a tração manual com pinça hemostática. Foi medido o tempo necessário para remoção dos retentores; os dados foram analisados por ANOVA e teste de Tukey (5% de significância). Resultados: Houve diferença estatisticamente significante entre G1(3,7±1,5 min) e G2 (1,4±0,5 min) (P<0,001) e entre G1 e G3 (2,3±1,2 min) (P=0,041). Não houve diferença significante entre G2 e G3 (P=0,207). Conclusão: Concluiu-se que os pinos metálicos fundidos lisos apresentaram maior dificuldade para remoção.


Purpose: The objective of this study was to evaluate the use of ultrasound for removal of cast posts (CP) with different characteristics. Methods: Thirty uniradicular human teeth were endodontically treated and divided into three groups: G1 - conventional post (no additional mechanical retention); G2 - post with longitudinal groove; and G3 - post with transversal grooves. The posts were cemented inside the root canal using zinc phosphate cement, and the specimens were stored in room temperature for 24 h. The procedures for post removal included the use of ultrasonification (ultrasound equipment Multisonic S) and manual pushing with haemostatic tweezers. The period of time necessary for post removal was recorded, and data were analyzed by ANOVA and Tukey tests (5% level of significance). Results: Time for post removal was statistically different between groups G1 (3.7±1.5 min) and G2 (1.4±0.5 min) (P<0.001) and between G1 and G3 (2.3±1.2 min) (P=0.04). No difference was found between G2 and G3 (P=0.207). Conclusion: It was concluded that conventional cast posts were more difficult to remove in comparison with posts with additional mechanical retention.


Sujet(s)
Humains , Science des ultrasons , Restauration coronoradiculaire , Ablation de dispositif
8.
Rev. Assoc. Paul. Cir. Dent ; 63(1): 64-68, jan.-fev. 2009. ilus
Article de Portugais | LILACS, BBO | ID: lil-534139

RÉSUMÉ

São consideradas periapicopatias verdadeiras de origem inflamatória a pericementite apical aguda e crônica, abscesso dentoalveolar agudo e crônico, granuloma periapical e cisto periapical. Casos de lesões periapicais com imagens radiográficas sugerindo cistos podem ser tratados de forma não-cirúrgica com um índice de sucesso bastante elevado. Este trabalho teve como objetivo apresentar três casos clínicos de tratamento não-cirúrgico para lesões com aspecto radiográfico sugestivo de cisto. Foi realizado o preparo químico mecânico e a medicação intracanal com pasta de hidróxido de cálcio associado ao paramonoclorofenol canforado com trocas mensais de seis e sete meses ou ao gel de clorexidina 2% com trocas mensais durante dez meses. Medicação sistêmica também foi utilizada como complemento do tratamento. Em dois casos, houve regressão da lesão somente com o tratamento endodôntico. No terceiro caso, na proservação de dois anos, foi observada a recidiva da imagem sendo indicada a complementação cirúrgica do caso. Conclui-se que lesões periapicais, com imagens radiográficas sugestivas de cistos, podem ser tratadas da forma convencional, com trocas periódicas da medicação intracanal à base de hidróxido de cálcio associado ao paramonoclorofenol canforado ou ao gel de clorexidina 2%, com um índice de sucesso bastante elevado.


Acute and chronic apical pericementitis, acute and chronic dentoalveolar abscess, apical granuloma and apical periodontal cyst are considered real periapical diseases of inflammatory original. Cases that present periapicallesions with cyst-like radiographic images may be treated non-surgically with significantly high index of success. The purpose of this report was presented three clinical cases reports which were performed non-surgical treatment for lesions with a cyst-like radiographic aspect. In these clinical cases, the root canal was prepared by chemical mechanic treatment using intra-canal medication based on calcium hydroxide paste associated with camphorated paramonochlorophenol changing during 6 and 7 months or 2% chlorhexidine gel changing during 10 months. Systemic medication had also used to complement the treatment. It was verified that two cases revealed regression of the cyst-like lesion using only the root canal treatment. After two years following, the third case showed the recidivate image and it was recommended the surgical procedure for the treatment. In conclusion, periapical lesions with a cyst-like radiographic can be treated by conventional way using periodic changes of intra-canal medication based on calcium hydroxide associated with camphorated paramonochlorophenol or 2% chlorhexidine gel promoting a high index of success.


Sujet(s)
Humains , Mâle , Femelle , Adulte , Kyste radiculaire , Chlorhexidine/usage thérapeutique , Hydroxyde de calcium , Hydroxyde de calcium/usage thérapeutique
9.
Araraquara; s.n; 2009. 110 p. ilus.
Thèse de Portugais | LILACS, BBO | ID: lil-590725

RÉSUMÉ

O objetivo deste trabalho foi avaliar a quantidade de peróxido que passa da câmara pulpar para a superfície dentária externa durante o clareamento interno no esmalte, cemento e dentina. Foram utilizados 50 incisivos bovinos extraídos que receberam aberturas coronárias, as raízes foram cortadas a 5 mm da junção amelo-cementária e foi realizado um tampão de 2mm de ionômero de vidro selando a entrada do canal. A extremidade apical dos espécimes foi isolada externamente com resina composta fotoativada. Os dentes foram então impermeabilizados completamente, deixando exposto somente as áreas a serem estudadas. As câmaras coronárias foram preenchidas com peróxido de hidrogênio a 35%. Os dentes foram divididos em três grupos experimentais e dois grupos controles, com 10 espécimes cada. GE – esmalte exposto a ser avaliado; GC – cemento exposto a ser avaliado; GD – dentina exposta a ser avaliada; e dois grupos Controle: GC1 – sem a presença de clareador internamente e sem impermeabilização e GC2 – câmara pulpar preenchida com clareador e impermeabilização total. Cada amostra foi colocado no interior de reservatórios individuais com 1000μl de solução tampão de acetato 2M (pH 4,5). Após 7 dias a 37±1ºC a solução foi transferida para um tubo de ensaio onde foram adicionados 100μl do corante violeta leucocristal e 50 μl de peroxidase, resultando em uma solução de coloração azul. A mensuração da absorbância foi feita em um espectrofotômetro e convertida em μg/ml de peróxido. Para avaliar se houve diferença entre os grupos experimentais e controle, realizou-se os testes de Kruskall-Walis e Dunn-Bunferroni e os resultados mostraram os íon passaram mais pela dentina exposta, seguida da dentina recoberta pelo esmalte e dentina recoberta pelo cemento, sem diferenças estatísticas. Todos os grupos experimentais foram diferentes dos controles...


The aim of this study was evaluated the pulp chamber penetration of peroxide bleaching agent to the root surface during the internal bleach technique in the enamel, dentin and cement. Bovine teeth were sectioned 5mm apical of the cemento-enamel junction and was performed a 2mm cervical seal with glass ionomer cement. The external apical part of samples was filled with composite resin. The teeth were divided into three experimental groups and two control groups: GE – exposition of enamel; GC – exposition of cement; GD – exposition of dentin and control groups: GC1 – no presence of internal agent bleaching e no waterproof and GC2 – pulp chamber filled with bleaching agent and total waterproof. Each sample was placed inside of individual flasks with 1000μl of acetate buffer solution 2M (pH 4.5). After 7 days, the buffer solution was transferred to a glass tube where leuco crystal violet and horseradish peroxidase were added, producing a blue solution. The optical density of the blue solution was determined by spectrophotometer and converted into microgram equivalents of hydrogen peroxide. Data were submitted to Kruskal-Wallis, and Dunn-Bunferroni tests. The results showed that the ions penetration was higher in dentin followed by enamel and cement. All experimental groups presented statistical differences to the control groups.


Sujet(s)
Peroxyde d'hydrogène , Transport des ions , Blanchiment dentaire
10.
Rev. Assoc. Paul. Cir. Dent ; 60(5): 375-378, set.-out. 2006. ilus, tab
Article de Portugais | LILACS, BBO | ID: lil-543818

RÉSUMÉ

Para avaliar o desgaste interno do terço cervical de raízes de molares, comparando-se instrumentos rotatórios em níquel e titânio com oscilatórios em aço inoxidável e brocas Gates-Glidden, 30 raízes de molares humanos foram padronizadas e radiografadas. As radiografias foram digitalizadas e mediu-se a espessura dentinária na entrada do canal radicular e 3 mm abaixo da entrada, em relação à parede de risco e a de segurança. As amostras foram aleatoriamente divididas nos grupos: G1 (Pré-Race), G2 (Gates-Glidden) e G3 (Endo-Eze). Radiografou-se novamente e as radiografias foram digitalizadas. Foi feita a redução percentual e os dados submetidos ao teste "t" pareado. Concluiu-se que não houve diferença significante entre os grupos, havendo, no entanto, um maior desgaste da parede de risco quando as brocas de Gates-Glidden foram utilizadas.


To evaluate the internal wear of the cervical third of molar root canal, comparing rotary nickel-titanium instruments with stainless steel oscillatory instruments and Gates-Glidden burs, 30 human molar roots were slandered and radiographed. The radiographs were digitalized and the dentin width was measured at the entrance of the root canal and 3 mm down from the entrance, in relation to the risk and safety walls. The samples were randomly divided the groups: G1 (Pré-Race), G2 (Gales-Glidden) e G3 (Endo-Eze). Radiographs were taken again and digitalized. Percentual reduction made and the data were submitted to pared t test. It was concluded that there was no significant difference among the studied groups, thus a higher wear was found on the risk walls when Gates-Glidden burs were used.


Sujet(s)
Humains , Instruments dentaires , Molaire
SÉLECTION CITATIONS
DÉTAIL DE RECHERCHE