Selenium-Enriched Probiotic Saccharomyces boulardii CCT 4308 Biomass Production Using Low-Cost Sugarcane Molasses Medium

Abstract Food supplements have been increasingly investigated. Probiotics have several benefits for human and animal health and selenium (Se) is widely recommended against oxidative stress. In this context, the aim of this study was to develop a low-cost bioprocess to produce a functional food product comprising both probiotic and Se accumulation. Yeast cells of Saccharomyces boulardii CCT 4308 were cultivated using sugarcane molasses as substrate. Optimization studies were performed to evaluate the best medium composition for biomass production and Se-accumulation in batch and fed-batch systems. Optimized conditions were defined with a medium composed of 150 g L-1 sugarcane molasses and 12 g L-1 yeast extract, with feeding of 100 g L-1 sugarcane molasses and 100 μg mL-1 of Se incorporation after 4 h and 10 h of fermentation, respectively, during 48 h in STR (stirred tank reactor). Best biomass production reached 14.52 g L-1 with 3.20 mg Se g-1 biomass at 12 h. Process optimization led to 4.82-fold increase in biomass production compared to initial condition. A final Se-enriched S. boulardii CCT 4308 biomass was obtained, which is comparable to commercial products. An alternative probiotic yeast biomass was efficiently produced as a new food-form of Se supplement in a sustainable process using an inexpensive agro-industrial residue.

A comparative study of extraction techniques for maximum recovery of bioactive compounds from Ganoderma lucidum spores / Estudio comparativo de técnicas de extracción para la máxima recuperación de compuestos bioactivos a partir esporas de Ganoderma lucidum

SUMMARY This study aimed at evaluating effective methods for breaking the hard and insoluble spores of Ganoderma lucidum to recover functional biomolecules. Rupture techniques were evaluated such as manual maceration (RM), maceration with spheres of various materials (BR), and microwave exposure plus maceration with steel/ chrome spheres (MBR1). Spore rupture was evaluated using UV-Vis spectroscopy, which showed vibrations of 2955, 1642, 1240, 1080 and 1746 cm-1 corresponding to changes in spore walls. The MBR1 extract contained the largest amounts of carbohydrates (19.80 mg.g-1 spores) and polyphenols (2.21 mg.g-1 spores), whereas the BR extract had higher antioxidant activity (57.22%Inb DPPH). The MBR1 and BR extracts contained 62.2 and 73.5% glucose, respectively. Both methods also involved significant extraction of carbohydrates and proteins. The best way to extract biomolecules from spore walls is to perform a microwave heat treatment and break the walls with steel/chrome spheres; this produces large quantities of carbohydrates with antioxidant properties.

RESUMEN El objetivo de este estudio fue evaluar varios métodos de ruptura de las esporas de Ganoderma lucidum y extraer sus propiedades bioactivas. Para este propósito se evaluaron diferentes técnicas de rompimiento como: la maceración manual (RM), la maceración con esferas de diversos materiales (BR) y la exposición a microondas junto la maceración de las esporas con esferas de acero/cromo (MBR1). La ruptura de las esporas fue evaluada por espectroscopia UV-Vis, la cual mostró que las vibraciones 2955, 1642, 1240, 1080 y 1746 cm-1 correspondieron a cambios estructurales en las paredes de las esporas. El extracto MBR1 presento el mayor contenido de carbohidratos (19,80 mg.g-1) y polifenoles (2,21 mg.g-1), mientras que el extracto BR tuvo una mayor actividad antioxidante (57,22% Inb DPPH). Los extractos MBR1 y BR también presentaron en el análisis de monosacáridos un 62,2 y 73,5% de contenido glucosa. Como conclusión la mejor metodología para extraer biomoléculas de las paredes de las esporas de G. lucidum fueron el tratamiento térmico con microondas y la ruptura de las paredes con esferas de acero/cromo, porque este proceso permitió la extracción de una mayor cantidad de carbohidratos con posibles propiedades antioxidantes.

Microscale direct transesterification of microbial biomass with ethanol for screening of microorganisms by its fatty acid content

Abstract We present an improved method of direct transesterification suitable for the quantitative analysis of multiple dry samples for its fatty acid content, using a minimal amount of biomass and reactants. The method features an acid-catalyzed direct alcoholysis of microgram samples of dry biomass; the rationale behind the solvent and reagent proportions chosen is discussed. The method was validated using seven microbial strains with diverse lipid content (Saccharomyces cerevisiae, Saccharomyces boulardii, Candida tropicalis, Haematococcus pluvialis, Chlorella vulgaris, Spirulina platensis and Schizochytrium limacinum), and compared with a macroscale direct transesterification method, and with gravimetric analysis of lipids extracted with solvents. The microscale method showed a conversion of 98.06 ± 0.87% of the lipids, using approximately 3 mg of dry biomass, 1mL of 0.2M H2SO4 dissolved in anhydrous ethanol (the acid is the catalyzer and ethanol the reactant)). The mixture was maintained at 70 °C for 20 h with periodic mixing, and then extracted with 2mL n-heptane and analyzed by GC-FID. The lipid content was then calculated considering dilution and sample mass. This method is effective, reliable, and technically attractive for analytical and comparative purposes.

Real-time PCR for traceability and quantification of genetically modified seeds in lots of non-transgenic soybean / PCR em tempo real para rastreabilidade e quantificação de sementes geneticamente modificados em lotes de soja não transgênica

The constant presence of genetically modified (GM) soybean in conventional seed lots has become a growing problem for international seed trade. In this context, seed companies have prompted the development of routine tests for accurate genetically modified soybean seeds detection. In this study, a quantitative PCR-based method was standardized in order to detect and quantify mixtures of seeds (i.e. certified seed) or GM grains (i.e. seeds came from field) into samples of non-GM soybean, in a way that soybean lots can be assessed within the standards established by legislation. The method involved the use of p35S-f2/petu-r1 primers targeting CP-4 enolpyruvylshikimate-3-phosphate synthase (cp4-epsps) gene (i.e. that confers herbicide tolerance in Roundup ReadyTM (RR)) for real-time PCR detection and quantification through mericon Quant GMO Detection Assay. The results revealed the method efficiency to detect and quantify the presence of even one soybean seed in batch used for routine evaluation of GM seeds. In addition, it was possible to detect of up to 0.1% of transgenic DNA relative to the soybean grains content. Thus, the sensitive GMO quantitative approach described in this study will provide support in supervising activities, and facilitate the process and control of GM soybean.

A constante presença da soja geneticamente modificada (GM) em lotes de sementes convencionais têm se tornado um grande problema para o comércio internacional de sementes. Neste contexto, as empresas de sementes estão em busca de testes de rotina extremamente precisos para a detecção de sementes de soja geneticamente modificadas. Neste estudo, um método baseado em PCR quantitativo foi padronizado para detectar e quantificar misturas de sementes (i.e. sementes certificadas) ou grãos geneticamente modificados (i.e. sementes oriundas do campo) dentro de lotes de soja não transgênica, de um modo que os lotes de soja possam ser avaliados dentro dos parâmetros estabelecidos pela legislação. O método envolveu o uso dos iniciadores p35S-f2/petu-r1 alvejando o gene CP-4 5-nolpiruvil-shikimato-3-fosfato sintase (cp4-epsps) (i.e. que confere a tolerância ao herbicida Roundup Ready® (RR)) para detecção e quantificação em PCR de tempo real via Ensaio de detecção Mericon Quant GMO. Os resultados revelaram um método eficiente para detectar e quantificar a presença de até mesmo uma única semente de soja no lote usado para a avaliação de rotina de sementes geneticamente modificadas. Adicionalmente, foi possível detectar até 0,1% de DNA transgênico relativo ao conteúdo de grãos de soja. Dessa forma, uma abordagem quantitativa sensível à soja geneticamente modificada foi descrita nesse estudo e poderá fornecer suporte em atividades de supervisão, além de facilitar o processo de controle da soja geneticamente modificada.

Crude Fermented Extract Containing Gibberellic Acid Produced by Fusarium moniliforme is an Alternative to Cost Reduction in Biofactories

ABSTRACT Nidularium procerum and Nidularium innocentii (Bromeliaceae) were cultivated in vitro on media supplemented with different sources and levels of GA3 (gibberellic acid). These sources were the commercial powder (analytical degree) and fermented extract obtained by Fusarium moniliforme via solid state fermentation. The in vitro elongation and rooting of these plants were evaluated after 50 days of cultivation. The GA3 present in the fermented extract possess the same effect of purified GA3 (analytical degree) for the increase of the height of aerial part of shoots of N. innocentii, but not for the N. procerum being the GA3 fermented extract in a lesser degree. The GA3 fermented extract influences negatively the rooting in N. innocentii, while GA3 analytical degree practically does not interfere in the rooting. On the other hand, in N. procerum, both the GA3 sources reduce the root number and do not interfere in rooting percentage. GA3 crude fermented extract is an alternative to reduce costs, however, its results can vary depending on the species and parameter evaluated. The fermented extract was stored at temperature during 260 days and its shelf life presented a suitable stability, maintaining 92% of its initial GA3 amount.

New strategy to improve quality control of Montenegro skin test at the production level

Abstract INTRODUCTION: The production of the Montenegro antigen for skin test poses difficulties regarding quality control. Here, we propose that certain animal models reproducing a similar immune response to humans may be used in the quality control of Montenegro antigen production. METHODS: Fifteen Cavia porcellus (guinea pigs) were immunized with Leishmania amazonensis or Leishmania braziliensis , and, after 30 days, they were skin tested with standard Montenegro antigen. To validate C. porcellus as an animal model for skin tests, eighteen Mesocricetus auratus (hamsters) were infected with L. amazonensis or L. braziliensis , and, after 45 days, they were skin tested with standard Montenegro antigen. RESULTS: Cavia porcellus immunized with L. amazonensis or L. braziliensis , and hamsters infected with the same species presented induration reactions when skin tested with standard Montenegro antigen 48-72h after the test. CONCLUSIONS: The comparison between immunization methods and immune response from the two animal species validated C. porcellus as a good model for Montenegro skin test, and the model showed strong potential as an in vivo model in the quality control of the production of Montenegro antigen.

Development of an L-Lysine Enriched Bran for Animal Nutrition via Submerged Fermentation by Corynebacterium glutamicum using Agroindustrial Substrates

L-Lysine is an essential aminoacid added as supplement for animal feed. The aim of this work was to produce an L-Lysine enriched bran using Brazilian agroindustrial byproducts. Both the raw material costs and purification steps were minimized. Firstly, medium composition for the growth of Corynebacterium glutamicum ATCC 21799 was optimized targeting enhanced L-Lysine production - salt, vitamins and nitrogen sources concentrations were tested and selected. Next, UV mutant strains were generated and the best producers were used in formulated media using sugarcane molasses. It was reached a production of 9.3 g/L of L-Lysine with the optimized formulated media. This L-Lyisne rich broth was then impregnated and cyclically reimpregnated in pre-treated solid matrixes (sugarcane bagasse, citrus pulp, brewer spent grain, soybean husk and wheat bran). After processing, it was generated enriched brans with significant amounts of L-Lysine (13.8%, 7.0%, 8.9%, 5.9% and 8.4%, respectively), which has an interesting market potential for animal feed.

Dynamics of ethanol production from deproteinized whey by Kluyveromyces marxianus: An analysis about buffering capacity,thermal and nitrogen tolerance

The production of value-added products could be a valuable option for cheese wastewater management. However, this kind of study cannot just focus alone on getting the final product. This also necessitates studies on the dynamics of bioprocesses. With these as background, the present investigation aimed at evaluating the buffering capacity of deproteinized whey and effect of temperature and nitrogen source on ethanol yields from it. The batch fermentation conditions used to evaluate ethanol production were temperatures 30, 35, 40°C and pH 4.5, 5.0, 5.5, 6.0. To study the influence of nitrogen source on ethanol yield, a design matrix was applied using yeast extract and (NH4)2SO4.The final pH was analyzed to evaluate the buffering capacity. The results showed that the Kluyveromyces marxianus was thermotolerance to produce ethanol at 35 and 40°C, which was not observed at 30°C. Results also showed that the deproteinization procedure did not affect the buffering capacity of cheese whey. Finally, higher ethanol production was obtained using yeast extract (3% v/v). These results could be important for developing low-cost method for industrial production of ethanol from deproteinized whey.

Biofiltration of a styrene/acetone vapor mixture in two reactor types under conditions of styrene overloading

This aim of study was to compare the performance of a biofilter (BF) and trickle bed reactor (TBR) under increased styrene loading with a constant acetone load, 2 gc/m3/h. At styrene loading rates up to 30 gc/m3/h, the BF showed higher styrene removal than TBR. However, the BF efficiency started to drop beyond this threshold loading and could never reach steady state, whereas the TBR continued to yield a 50% styrene removal. The acetone removal remained constant (93-98%) in both the reactors at any styrene loading. Once the overloading was lifted, the BF recovered within 26 min, whereas the TBR efficiency bounced back only to 95%, gradually returning to complete removal only in 10 h.

Evaluation of probiotic properties of Pediococcus acidilactici B14 in association with Lactobacillus acidophilus ATCC 4356 for application in a soy based aerated symbiotic dessert

The aim of this study was to evaluate the probiotic properties of Pediococcus acidilactici B14 and to study its resistance in the gastrointestinal system when combined with Lactobacillus acidophilus ATCC 4356 and used in a potentially symbiotic aerated soy based dessert. P. acidilactici B14 showed some important probiotic characteristics such as survival rate of 45.9% at pH 2.5; 72.4% in 0.3% bile salts and 95.8% after gastrointestinal transit at pH 4.0. Tolerance against the antibiotics cephalexin, neomycin, vancomycin, cefotaxime and penicillin G was also observed. The strain inhibited antagonism against the following cultures: Escherichia coli ATCC 25922, Bacillus cereus ATCC 33018, Staphylococcus aureus ATCC 6538P and Salmonella sp. The mixed culture of P. acidilactici B14 with L. acidophilus ATCC 4356 showed a survival rate of 92.4% after the passage through the gastrointestinal system at pH 4.0. Furthermore, in the presence of the food matrix, an average increase in cell viability, after being subjected to the gastrointestinal system of 9.9% at pH 2.0 and 6.1% at pH 4.0, was observed. This characterized the adequacy of the associated culture as probiotic in the development of a functional food such as soy based aerated symbiotic dessert.

Mixed Cultures Fermentation for the Production of Poly- ß-hydroxybutyrate

Poly-ß-hydroxybutyrate (PHB) is a biodegradable intracellular microbial product produced by many bacteria and it is comparable to some of the petrochemical derived thermoplastics such as polypropylene. One of the main barriers for the commercial exploitation is the high cost of the substrate for the production of biopolymer. The utilization of mixed microbial cultures facilitates the use of complex substrates thereby reducing the cost of PHB production. In the present study, mixed culture systems were evaluated for PHB production. Bacillus firmus NII 0830 was used for the production of PHB since it accumulates a large amount of PHB and a second organism Lactobacillus delbrueckii NII 0925 was used to provide lactic acid. FTIR and 1H NMR analyses revealed that the PHB extracted from pure culture and mixed culture showed exact match to that of standard PHB. Biodegradation studies of the PHB blends showed 87% degradation. It was also found that a consortium of organisms degraded the films faster than a single organism.

Biofiltration of volatile organic compounds of Brazilian gasoline

Gasoline vapors pollute the atmosphere and can be harmful to human and animal health. Tons of particles of this pollutant are expelled to the atmosphere, generating great economic losses to the industries and serious damage to the environment. Biofiltration is an option of simple technology with low costs that can be used for the gasoline vapor treatment. The present study was carried out in two biofilter systems of laboratorial scale. The biofilter system 1 was operated with a total volume of 2.72 L (four columns) and the biofilter 2 with 2.04 L (three columns) of total volume. Both of them were operated in sequence, with airflow of 450 mL entering each one. Results obtained were as follows for the removal efficiency (RE) of different gasoline vapor concentrations in the air: 1.3 g.m-3 during 35 days, RE of 100%; 3 g.m-3 during 52 days, RE of 90%; 4.5 g.m-3 during 48 days, RE of 70-80% and 8g.m-3 during 28 days, RE of 70%.

Pretreatment strategies for delignification of sugarcane bagasse: a review

The valorization of agro-residues by biological routes is a key technology that contributes to the development of sustainable processes and the generation of value-added products. Sugarcane bagasse is an agro-residue generated by the sugar and alcohol industry in Brazil (186 million tons per year), composed essentially of cellulose (32-44%), hemicellulose (27-32%) and lignin (19-24%). The conversion of sugarcane bagasse into fermentable sugars requires essentially two steps: pretreatment and hydrolysis. The aim of the pretreatment is to separate the lignin and break the structure of lignocellulose, and it is one of the most critical steps in the process of converting biomass to fermentable sugars. The aim of this review is to describe different pretreatment strategies to promote the delignification of the sugarcane bagasse by thermo-chemical and biological processes.

Screening of native yeast from Agave duranguensis fermentation for isoamyl acetate production

In this work, fifty yeast strains, isolated from the spontaneous alcoholic fermentation of Agave duranguensis to produce mezcal, were tested using the double coupling system. These yeasts were from the genera Pichia, Torulaspora, Saccharomyces, Kluyveromyces, Deckera, Hanseniaspora, and Candida. P. fermentans ITD00165 was the best isoamyl acetate producer, yielding 0.38 g/L of ester after incubation for 24 h, while K. marxianus ITD00211 produced 0.32 g/L of ester. Thus P. fermentans TD00165 could be considered as an excellent choice for use in optimization studies of the culture medium and bioreactor operating conditions to develop a process for biotechnological production of isoamyl acetate.

Partial characterization of an inulinase produced by Aspergillus japonicus URM5633

Enzymes obtained by fermentation processes offer a number of advantages and have been widely researched and used throughout the world. This study aimed to partially characterise an inulinase produced from palm and cassava peel. The enzyme was produced via the solid-state fermentation of Aspergillus japonicus URM5633. The optimal temperatures were 50ºC and 55ºC, and the optimal pH values were 5.2 and 3.4 for inulinase fermentatively produced from palm and cassava peel, respectively. The thermostability measurements for inulinase produced in palm showed that the relative activity remained below 100% until 30 minutes of stability for all temperatures, but reached 106.8% at a temperature of 50ºC after 60 minutes. Inulinase from the crude extract of cassava peel was pH stable and only decreased to 55% of the maximal activity over the course of the assay, suggesting that this enzyme can be used in inulinase production and can be utilized in food industries.

Recent developments in microbial oils production: a possible alternative to vegetable oils for biodiesel without competition with human food?

Since centuries vegetable oils are consumed as human food but it also finds applications in biodiesel production which is attracting more attention. But due to being in competition with food it could not be sustainable and leads the need to search for alternative. Nowdays microbes-derived oils (single cell oils) seem to be alternatives for biodiesel production due to their similar composition to that of vegetable oils. However, the cold flow properties of the biodiesel produced from microbial oils are unacceptable and have to be modified by an efficient transesterification. Glycerol which is by product of transesterification can be valorised into some more useful products so that it can also be utilised along with biodiesel to simplify the downstream processing. The review paper discusses about various potent microorganisms for biodiesel production, enzymes involved in the lipid accumulation, lipid quantification methods, catalysts used in transesterification (including enzymatic catalyst) and valorisation of glycerol.

Formulated products containing a new phytase from Schyzophyllum sp. phytase for application in feed and food processing

A new formulated product containing high yield of phytase from Schizophyllum sp., an important mushroom used for medicinal studies, was developed for application in feed industries and for future use in food processing. The enzyme presented a high activity yield 55.5 U/mL and 6240 U/gds in liquid and solid formulated product, respectively. It showed a good shelf-life in concentrated product, retaining 67.8 percent of its activity after 60 days of storage at room temperature and 90 percent of the activity was maintained in the liquid formulation after the same period. Powder bioformulated product maintained 77 percent of its activity after two months of storage, without the addition of chemical additives, which was named as a new bioformulated product containing high quantities of phytase. After separation and concentration steps, enzyme stability was monitored in two forms: liquid and solid. The liquid product was stable with the presence of manitol and polyethylene glycol at 1 percent (w/v), while solid product was the most stable product without the presence of chemical additives.

Isolation and screening of microorganisms with potential for biotransformation of terpenic substrates

The objective of the present work was to isolate and select strains with potential to perform the biotransformation of terpenic substrates. Microorganisms obtained from a collection culture and also isolated from a natural source of terpene substrate were tested. Seventeen strains were selected by their resistance to terpenes in potato dextrose agar containing up to 1 percent of limonene or α-pinene and β-pinene (1:1). Subsequently, 10 strains were selected by their capacity of using these terpenes as sole carbon source in a mineral medium. The biotransformation capacity of these strains was tested and the products obtained were identified by GC-MS.

Optimization of biomass production with copper bioaccumulation by yeasts in submerged fermentation

The objective of this work was to study the production of biomass with copper bioaccumulation in submerged fermentation using sugarcane molasses. Candida pelliculosa BARU 05 isolated from Baru (Dipteryx alata) was selected for its good capacity to accumulate the copper. Fermentation was carried out using the medium composed by sugarcane molasses at 5 °Brix enriched with (g/L) CuSO4.5H2O 0.1; yeast extract, 10.0; (NH4)2SO4, 5.0 ; KH2PO4, 5.0 MgSO4, 0.5, inoculum 10 percent of total volume (100 ml), pH 6.0, and incubation at 30 °C, 120 rpm for 120 h. After three steps of optimization an uptake of 95.04 percent and 13.397 g/L biomass were obtained. The kinetics of copper bioaccumulation and biomass production was followed in a 10- liter bioreactor in a batch and fed-batch fermentation which showed copper accumulation of 91.98 and 100 percent, respectively, and biomass production of 38.85 g/L (24 h) and 57.54 g/L (48 h), respectively.

Evaluation of poultry litter traditional composting process

The objective of this work was to study the poultry litter composting and evaluate the physico-chemical and microbiological transformations as a time-function. At the end of composting, an increase of humification matter, a decrease of microbial diversity and the elimination of pathogens were observed. Results showed that poultry litter was liable of composting, without any nutritional complementation or inoculation and the process occurred similarly to other kind of organic residues.