Your browser doesn't support javascript.
loading
Montrer: 20 | 50 | 100
Résultats 1 - 2 de 2
Filtre
Ajouter des filtres








Gamme d'année
1.
West China Journal of Stomatology ; (6): 576-581, 2021.
Article Dans Anglais | WPRIM | ID: wpr-921377

Résumé

OBJECTIVES@#This study was performed to investigate the microstructure and mechanical properties of dental zirconia manufactured by digital light processing (DLP) 3D printing and the clinical application prospects of this material.@*METHODS@#The experiment (DLP) group was zirconia manufactured by DLP 3D printing, and the control (MILL) group was milled zirconia. The density, grain size, and phase composition were measured to study the microstructure. Flexural strength was measured by using three-point bending tests, while Vickers hardness was determined through a Vickers hardness tester. Fracture toughness was tested using the single-edge V-notched beam method.@*RESULTS@#Zirconia density of the DLP group was (6.019 8±0.021 3) g·cm@*CONCLUSIONS@#Zirconia manufactured by DLP 3D printing had microstructure and mechanical properties similar to those of the milled zirconia. Only the flexural strength and the Vickers hardness of the experimental zirconia were slightly lower than those of the milled zirconia. Therefore, DLP-manufactured zirconia has a promising future for clinical use.


Sujets)
Porcelaine dentaire , Test de matériaux , Impression tridimensionnelle , Zirconium
2.
West China Journal of Stomatology ; (6): 350-355, 2020.
Article Dans Chinois | WPRIM | ID: wpr-827532

Résumé

The minimum amount of tooth preparation that can be fully controlled is crucial in achieving long-term, stable, and effective aesthetic restoration, which is also a major difficulty in aesthetic restoration. The tooth preparation can be imple-mented efficiently and accurately through digital technology based on the fixed-deep hole guiding technology. Prior the actual tooth preparation, the technology first designs the virtual contour, layering, and virtual occlusion of the prosthesis on the computer. Then, virtual tooth preparation is carried out by cutting back according to the virtual prosthesis. Next, the virtual drilling operation plan is designed according to the shape of the virtual tooth preparation and the contour of the abutment tooth. Finally, the tooth preparation guide plate is designed and printed in 3D. It realizes the whole process of quantitative and precise guidance of dental preparation, visualizes the restoration space, reduces the clinical operation time, and guarantees the quality of dental preparation. It also promotes the improvement of the teaching quality of digital practical exercises.


Sujets)
Plaques orthopédiques , Dentisterie esthétique , Impression tridimensionnelle , Dent , Préparation de dent
SÉLECTION CITATIONS
Détails de la recherche